Linux-Fsdevel Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: linux-kernel@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>, Song Liu <song@kernel.org>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	linux-raid@vger.kernel.org, linux-fsdevel@vger.kernel.org
Subject: [PATCH 10/17] initrd: switch initrd loading to struct file based APIs
Date: Thu,  9 Jul 2020 17:18:07 +0200	[thread overview]
Message-ID: <20200709151814.110422-11-hch@lst.de> (raw)
In-Reply-To: <20200709151814.110422-1-hch@lst.de>

There is no good reason to mess with file descriptors from in-kernel
code, switch the initrd loading to struct file based read and writes
instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/read_write.c          |  2 +-
 include/linux/syscalls.h |  1 -
 init/do_mounts_rd.c      | 82 ++++++++++++++++++++--------------------
 3 files changed, 43 insertions(+), 42 deletions(-)

diff --git a/fs/read_write.c b/fs/read_write.c
index bbfa9b12b15eb7..fc1cbe2517894f 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -301,7 +301,7 @@ loff_t vfs_llseek(struct file *file, loff_t offset, int whence)
 }
 EXPORT_SYMBOL(vfs_llseek);
 
-off_t ksys_lseek(unsigned int fd, off_t offset, unsigned int whence)
+static off_t ksys_lseek(unsigned int fd, off_t offset, unsigned int whence)
 {
 	off_t retval;
 	struct fd f = fdget_pos(fd);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index b951a87da9877c..10843a6adb770d 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -1246,7 +1246,6 @@ int ksys_fchown(unsigned int fd, uid_t user, gid_t group);
 int ksys_getdents64(unsigned int fd, struct linux_dirent64 __user *dirent,
 		    unsigned int count);
 int ksys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg);
-off_t ksys_lseek(unsigned int fd, off_t offset, unsigned int whence);
 ssize_t ksys_read(unsigned int fd, char __user *buf, size_t count);
 void ksys_sync(void);
 int ksys_unshare(unsigned long unshare_flags);
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 27b1bccf6f12a8..7b64390c075043 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -31,7 +31,8 @@ static int __init ramdisk_start_setup(char *str)
 }
 __setup("ramdisk_start=", ramdisk_start_setup);
 
-static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
+static int __init crd_load(struct file *in_file, struct file *out_file,
+		decompress_fn deco);
 
 /*
  * This routine tries to find a RAM disk image to load, and returns the
@@ -53,7 +54,8 @@ static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
  *	lz4
  */
 static int __init
-identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
+identify_ramdisk_image(struct file *file, int start_block,
+		decompress_fn *decompressor)
 {
 	const int size = 512;
 	struct minix_super_block *minixsb;
@@ -64,6 +66,7 @@ identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 	unsigned char *buf;
 	const char *compress_name;
 	unsigned long n;
+	loff_t pos;
 
 	buf = kmalloc(size, GFP_KERNEL);
 	if (!buf)
@@ -78,8 +81,8 @@ identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 	/*
 	 * Read block 0 to test for compressed kernel
 	 */
-	ksys_lseek(fd, start_block * BLOCK_SIZE, 0);
-	ksys_read(fd, buf, size);
+	pos = start_block * BLOCK_SIZE;
+	kernel_read(file, buf, size, &pos);
 
 	*decompressor = decompress_method(buf, size, &compress_name);
 	if (compress_name) {
@@ -124,8 +127,8 @@ identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 	/*
 	 * Read 512 bytes further to check if cramfs is padded
 	 */
-	ksys_lseek(fd, start_block * BLOCK_SIZE + 0x200, 0);
-	ksys_read(fd, buf, size);
+	pos = start_block * BLOCK_SIZE + 0x200;
+	kernel_read(file, buf, size, &pos);
 
 	if (cramfsb->magic == CRAMFS_MAGIC) {
 		printk(KERN_NOTICE
@@ -138,8 +141,8 @@ identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 	/*
 	 * Read block 1 to test for minix and ext2 superblock
 	 */
-	ksys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
-	ksys_read(fd, buf, size);
+	pos = (start_block + 1) * BLOCK_SIZE;
+	kernel_read(file, buf, size, &pos);
 
 	/* Try minix */
 	if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
@@ -166,15 +169,23 @@ identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 	       start_block);
 
 done:
-	ksys_lseek(fd, start_block * BLOCK_SIZE, 0);
 	kfree(buf);
 	return nblocks;
 }
 
+static unsigned long nr_blocks(struct file *file)
+{
+	struct inode *inode = file->f_mapping->host;
+
+	if (!S_ISBLK(inode->i_mode))
+		return 0;
+	return i_size_read(inode) >> 10;
+}
+
 int __init rd_load_image(char *from)
 {
 	int res = 0;
-	int in_fd, out_fd;
+	struct file *in_file, *out_file;
 	unsigned long rd_blocks, devblocks;
 	int nblocks, i;
 	char *buf = NULL;
@@ -184,20 +195,20 @@ int __init rd_load_image(char *from)
 	char rotator[4] = { '|' , '/' , '-' , '\\' };
 #endif
 
-	out_fd = ksys_open("/dev/ram", O_RDWR, 0);
-	if (out_fd < 0)
+	out_file = filp_open("/dev/ram", O_RDWR, 0);
+	if (IS_ERR(out_file))
 		goto out;
 
-	in_fd = ksys_open(from, O_RDONLY, 0);
-	if (in_fd < 0)
+	in_file = filp_open(from, O_RDONLY, 0);
+	if (IS_ERR(in_file))
 		goto noclose_input;
 
-	nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor);
+	nblocks = identify_ramdisk_image(in_file, rd_image_start, &decompressor);
 	if (nblocks < 0)
 		goto done;
 
 	if (nblocks == 0) {
-		if (crd_load(in_fd, out_fd, decompressor) == 0)
+		if (crd_load(in_file, out_file, decompressor) == 0)
 			goto successful_load;
 		goto done;
 	}
@@ -206,11 +217,7 @@ int __init rd_load_image(char *from)
 	 * NOTE NOTE: nblocks is not actually blocks but
 	 * the number of kibibytes of data to load into a ramdisk.
 	 */
-	if (ksys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0)
-		rd_blocks = 0;
-	else
-		rd_blocks >>= 1;
-
+	rd_blocks = nr_blocks(out_file);
 	if (nblocks > rd_blocks) {
 		printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n",
 		       nblocks, rd_blocks);
@@ -220,13 +227,10 @@ int __init rd_load_image(char *from)
 	/*
 	 * OK, time to copy in the data
 	 */
-	if (ksys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0)
-		devblocks = 0;
-	else
-		devblocks >>= 1;
-
 	if (strcmp(from, "/initrd.image") == 0)
 		devblocks = nblocks;
+	else
+		devblocks = nr_blocks(in_file);
 
 	if (devblocks == 0) {
 		printk(KERN_ERR "RAMDISK: could not determine device size\n");
@@ -245,14 +249,11 @@ int __init rd_load_image(char *from)
 		if (i && (i % devblocks == 0)) {
 			pr_cont("done disk #1.\n");
 			rotate = 0;
-			if (ksys_close(in_fd)) {
-				printk("Error closing the disk.\n");
-				goto noclose_input;
-			}
+			fput(in_file);
 			break;
 		}
-		ksys_read(in_fd, buf, BLOCK_SIZE);
-		ksys_write(out_fd, buf, BLOCK_SIZE);
+		kernel_read(in_file, buf, BLOCK_SIZE, &in_file->f_pos);
+		kernel_write(out_file, buf, BLOCK_SIZE, &out_file->f_pos);
 #if !defined(CONFIG_S390)
 		if (!(i % 16)) {
 			pr_cont("%c\b", rotator[rotate & 0x3]);
@@ -265,9 +266,9 @@ int __init rd_load_image(char *from)
 successful_load:
 	res = 1;
 done:
-	ksys_close(in_fd);
+	fput(in_file);
 noclose_input:
-	ksys_close(out_fd);
+	fput(out_file);
 out:
 	kfree(buf);
 	ksys_unlink("/dev/ram");
@@ -283,11 +284,11 @@ int __init rd_load_disk(int n)
 
 static int exit_code;
 static int decompress_error;
-static int crd_infd, crd_outfd;
+static struct file *crd_infile, *crd_outfile;
 
 static long __init compr_fill(void *buf, unsigned long len)
 {
-	long r = ksys_read(crd_infd, buf, len);
+	long r = kernel_read(crd_infile, buf, len, &crd_infile->f_pos);
 	if (r < 0)
 		printk(KERN_ERR "RAMDISK: error while reading compressed data");
 	else if (r == 0)
@@ -297,7 +298,7 @@ static long __init compr_fill(void *buf, unsigned long len)
 
 static long __init compr_flush(void *window, unsigned long outcnt)
 {
-	long written = ksys_write(crd_outfd, window, outcnt);
+	long written = kernel_write(crd_outfile, window, outcnt, &crd_outfile->f_pos);
 	if (written != outcnt) {
 		if (decompress_error == 0)
 			printk(KERN_ERR
@@ -316,11 +317,12 @@ static void __init error(char *x)
 	decompress_error = 1;
 }
 
-static int __init crd_load(int in_fd, int out_fd, decompress_fn deco)
+static int __init crd_load(struct file *in_file, struct file *out_file,
+		decompress_fn deco)
 {
 	int result;
-	crd_infd = in_fd;
-	crd_outfd = out_fd;
+	crd_infile = in_file;
+	crd_outfile = out_file;
 
 	if (!deco) {
 		pr_emerg("Invalid ramdisk decompression routine.  "
-- 
2.26.2


  parent reply	other threads:[~2020-07-09 15:19 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09 15:17 decruft the early init / initrd / initramfs code v2 Christoph Hellwig
2020-07-09 15:17 ` [PATCH 01/17] init: remove the bstat helper Christoph Hellwig
2020-07-09 15:17 ` [PATCH 02/17] md: move the early init autodetect code to drivers/md/ Christoph Hellwig
2020-07-09 15:18 ` [PATCH 03/17] md: replace the RAID_AUTORUN ioctl with a direct function call Christoph Hellwig
2020-07-09 15:18 ` [PATCH 04/17] md: remove the autoscan partition re-read Christoph Hellwig
2020-07-09 15:18 ` [PATCH 05/17] md: remove the kernel version of md_u.h Christoph Hellwig
2020-07-09 15:18 ` [PATCH 06/17] md: simplify md_setup_drive Christoph Hellwig
2020-07-09 15:18 ` [PATCH 07/17] md: rewrite md_setup_drive to avoid ioctls Christoph Hellwig
2020-07-09 15:18 ` [PATCH 08/17] initrd: remove support for multiple floppies Christoph Hellwig
2020-07-09 15:18 ` [PATCH 09/17] initrd: remove the BLKFLSBUF call in handle_initrd Christoph Hellwig
2020-07-09 15:18 ` Christoph Hellwig [this message]
2020-07-09 15:18 ` [PATCH 11/17] initrd: mark init_linuxrc as __init Christoph Hellwig
2020-07-09 15:18 ` [PATCH 12/17] initrd: mark initrd support as deprecated Christoph Hellwig
2020-07-09 15:18 ` [PATCH 13/17] initramfs: remove the populate_initrd_image and clean_rootfs stubs Christoph Hellwig
2020-07-09 15:18 ` [PATCH 14/17] initramfs: simplify clean_rootfs Christoph Hellwig
2020-07-09 15:18 ` [PATCH 15/17] initramfs: switch initramfs unpacking to struct file based APIs Christoph Hellwig
2020-07-09 18:07   ` Linus Torvalds
2020-07-09 18:12     ` Christoph Hellwig
2020-07-09 18:23       ` Linus Torvalds
2020-07-09 15:18 ` [PATCH 16/17] init: open code setting up stdin/stdout/stderr Christoph Hellwig
2020-07-09 18:32   ` Brian Gerst
2020-07-09 15:18 ` [PATCH 17/17] fs: remove ksys_open Christoph Hellwig
2020-07-09 18:08 ` decruft the early init / initrd / initramfs code v2 Linus Torvalds
2020-07-09 23:32 ` hpa
2020-07-14  6:41   ` Christoph Hellwig
2020-07-14 16:20     ` Song Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200709151814.110422-11-hch@lst.de \
    --to=hch@lst.de \
    --cc=hpa@zytor.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=song@kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=viro@zeniv.linux.org.uk \
    --subject='Re: [PATCH 10/17] initrd: switch initrd loading to struct file based APIs' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).