Re: [RESEND PATCH v6 14/27] drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll

["Jingoo Han" <jingoohan1@gmail.com>]

On Monday, April 23, 2018 6:50 AM, Enric Balletbo i Serra wrote:
> 
> From: zain wang <wzz@rock-chips.com>
> 
> There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
> list.  We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
> instead of ANALOGIX_DP_PLL_CTL.
> 
> Cc: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: zain wang <wzz@rock-chips.com>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reviewed-by: Archit Taneja <architt@codeaurora.org>

Acked-by: Jingoo Han <jingoohan1@gmail.com>

Best regards,
Jingoo Han

> ---
> 
>  .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 20 +++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index 7b7fd227e1f9..02ab1aaa9993 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -230,16 +230,20 @@ enum pll_status
> analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp)
>  void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool
> enable)
>  {
>  	u32 reg;
> +	u32 mask = DP_PLL_PD;
> +	u32 pd_addr = ANALOGIX_DP_PLL_CTL;
> 
> -	if (enable) {
> -		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -		reg |= DP_PLL_PD;
> -		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -	} else {
> -		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -		reg &= ~DP_PLL_PD;
> -		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
> +	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
> +		pd_addr = ANALOGIX_DP_PD;
> +		mask = RK_PLL_PD;
>  	}
> +
> +	reg = readl(dp->reg_base + pd_addr);
> +	if (enable)
> +		reg |= mask;
> +	else
> +		reg &= ~mask;
> +	writel(reg, dp->reg_base + pd_addr);
>  }
> 
>  void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
> --
> 2.17.0