LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jeff Garzik <jeff@garzik.org>
To: linux-kernel@vger.kernel.org, kkeil@suse.de,
	isdn4linux@listserv.isdn4linux.de
Subject: [PATCH 09/14] [ISDN] HiSax avm_pci: convert to modern PCI/ISA/PNP probing
Date: Wed, 31 Oct 2007 01:11:37 -0400	[thread overview]
Message-ID: <005a21707b8b2c4010e2e6dcc878b85b8f3be142.1203031878.git.jeff@garzik.org> (raw)
In-Reply-To: <74fc75b3eadfa82aee70b855e9944b5439a259d5.1203031878.git.jeff@garzik.org>

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/isdn/hisax/Kconfig   |    4 +-
 drivers/isdn/hisax/Makefile  |    2 +-
 drivers/isdn/hisax/avm_pci.c |  322 ++++++++++++++++++++++++++++++------------
 drivers/isdn/hisax/config.c  |   22 +---
 4 files changed, 235 insertions(+), 115 deletions(-)

diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 4f98afb..14951c0 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -132,8 +132,8 @@ config HISAX_AVM_A1
 	  non-standard IRQ/port settings.
 
 config HISAX_FRITZPCI
-	bool "AVM PnP/PCI (Fritz!PnP/PCI)"
-	depends on BROKEN || !PPC64
+	tristate "AVM PnP/PCI (Fritz!PnP/PCI)"
+	depends on (ISA || PNP || PCI) && (BROKEN || !PPC64)
 	help
 	  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
diff --git a/drivers/isdn/hisax/Makefile b/drivers/isdn/hisax/Makefile
index d3e464a..e03b4ce 100644
--- a/drivers/isdn/hisax/Makefile
+++ b/drivers/isdn/hisax/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_HISAX_W6692)		+= w6692.o libhisax.o
 obj-$(CONFIG_HISAX_NETJET)		+= netjet_s.o libhisax.o
 obj-$(CONFIG_HISAX_NETJET_U)		+= netjet_u.o libhisax.o
 obj-$(CONFIG_HISAX_TELESPCI)		+= telespci.o libhisax.o
+obj-$(CONFIG_HISAX_FRITZPCI)		+= avm_pci.o libhisax.o
 
 bkm_a4t_pci-objs			:= bkm_a4t.o jade.o
 enternow-objs				:= enternow_pci.o amd7930_fn.o
@@ -49,7 +50,6 @@ hisax-$(CONFIG_HISAX_16_3)		+= teles3.o
 hisax-$(CONFIG_HISAX_S0BOX)		+= s0box.o
 hisax-$(CONFIG_HISAX_AVM_A1)		+= avm_a1.o
 hisax-$(CONFIG_HISAX_AVM_A1_PCMCIA)	+= avm_a1p.o
-hisax-$(CONFIG_HISAX_FRITZPCI)		+= avm_pci.o
 hisax-$(CONFIG_HISAX_ELSA)		+= elsa.o
 hisax-$(CONFIG_HISAX_IX1MICROR2)	+= ix1_micro.o
 hisax-$(CONFIG_HISAX_DIEHLDIVA)		+= diva.o ipacx.o 
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index 0f1db1f..69f8389 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -14,13 +14,20 @@
 
 #include <linux/init.h>
 #include "hisax.h"
+#include "hisax_proto.h"
 #include "isac.h"
 #include "isdnl1.h"
 #include <linux/pci.h>
+#include <linux/isa.h>
 #include <linux/isapnp.h>
 #include <linux/interrupt.h>
 
-static const char *avm_pci_rev = "$Revision: 1.29.2.4 $";
+static int avm_protocol;		/* 0 == use DEFAULT_PROTO */
+
+#ifdef CONFIG_ISA
+static int avm_irq;			/* 0 == disable ISA probing */
+static int avm_io_base;			/* 0 == disable ISA probing */
+#endif
 
 #define  AVM_FRITZ_PCI		1
 #define  AVM_FRITZ_PNP		2
@@ -767,136 +774,267 @@ static int __devinit avm_setup_rest(struct IsdnCardState *cs)
 	return (1);
 }
 
-#ifndef __ISAPNP__
+#ifdef CONFIG_ISA
 
-static int __devinit avm_pnp_setup(struct IsdnCardState *cs)
+static int __devinit avm_isa_setup(struct IsdnCard *card)
 {
-	return(1);	/* no-op: success */
+	struct IsdnCardState *cs = card->cs;
+
+	/* old manual method */
+	cs->hw.avm.cfg_reg = avm_io_base;
+	cs->irq = avm_irq;
+	cs->subtyp = AVM_FRITZ_PNP;
+
+	return avm_setup_rest(cs);
 }
 
-#else
+static int __devinit avm_isa_init_one(struct device *dev, unsigned int id)
+{
+	struct IsdnCard icard = { ISDN_CTYPE_FRITZPCI, };
+	int cardnr;
 
-static struct pnp_card *pnp_avm_c __devinitdata = NULL;
+	icard.para[0] = (unsigned long) dev;
+	if (!avm_protocol)
+		icard.protocol = DEFAULT_PROTO;
+	else
+		icard.protocol = avm_protocol;
+
+	cardnr = hisax_init_hotplug(&icard, avm_isa_setup);
+	if (cardnr < 0)
+		return -ENODEV;
+	
+	dev_set_drvdata(dev, (void *)(unsigned long) cardnr);
+	return 0;
+}
 
-static int __devinit avm_pnp_setup(struct IsdnCardState *cs)
+static int __devexit avm_isa_remove_one(struct device *dev, unsigned int id)
 {
-	struct pnp_dev *pnp_avm_d = NULL;
+	int cardnr = (unsigned long) dev_get_drvdata(dev);
 
-	if (!isapnp_present())
-		return(1);	/* no-op: success */
+	HiSax_closecard(cardnr);
+	return 0;
+}
 
-	if ((pnp_avm_c = pnp_find_card(
-		ISAPNP_VENDOR('A', 'V', 'M'),
-		ISAPNP_FUNCTION(0x0900), pnp_avm_c))) {
-		if ((pnp_avm_d = pnp_find_dev(pnp_avm_c,
-			ISAPNP_VENDOR('A', 'V', 'M'),
-			ISAPNP_FUNCTION(0x0900), pnp_avm_d))) {
-			int err;
+static struct isa_driver avm_isa_driver = {
+	.probe		= avm_isa_init_one,
+	.remove		= __devexit_p(avm_isa_remove_one),
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "avm_pci",
+	},
+};
+
+#ifdef CONFIG_PNP
+static int __devinit avm_pnp_setup(struct IsdnCard *card)
+{
+	struct IsdnCardState *cs = card->cs;
+	struct pnp_dev *pnp_avm_d = (void *) card->para[0];
+	int err;
 
-			pnp_disable_dev(pnp_avm_d);
-			err = pnp_activate_dev(pnp_avm_d);
-			if (err<0) {
-				printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
-					__FUNCTION__, err);
-				return(0);
-			}
-			cs->hw.avm.cfg_reg =
-				pnp_port_start(pnp_avm_d, 0);
-			cs->irq = pnp_irq(pnp_avm_d, 0);
-			if (!cs->irq) {
-				printk(KERN_ERR "FritzPnP:No IRQ\n");
-				return(0);
-			}
-			if (!cs->hw.avm.cfg_reg) {
-				printk(KERN_ERR "FritzPnP:No IO address\n");
-				return(0);
-			}
-			cs->subtyp = AVM_FRITZ_PNP;
+	pnp_disable_dev(pnp_avm_d);
 
-			return (2);	/* goto 'ready' label */
-		}
+	err = pnp_activate_dev(pnp_avm_d);
+	if (err<0) {
+		printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
+			__FUNCTION__, err);
+		return(0);
 	}
 
-	return (1);
+	cs->irq = pnp_irq(pnp_avm_d, 0);
+	if (!cs->irq) {
+		printk(KERN_ERR "FritzPnP:No IRQ\n");
+		return(0);
+	}
+
+	cs->hw.avm.cfg_reg = pnp_port_start(pnp_avm_d, 0);
+	if (!cs->hw.avm.cfg_reg) {
+		printk(KERN_ERR "FritzPnP:No IO address\n");
+		return(0);
+	}
+	cs->subtyp = AVM_FRITZ_PNP;
+
+	return avm_setup_rest(cs);
 }
 
-#endif /* __ISAPNP__ */
+static int __devinit avm_pnp_init_one(struct pnp_dev *pdev,
+				       const struct pnp_device_id *dev_id)
+{
+	struct IsdnCard icard = { ISDN_CTYPE_FRITZPCI, };
+	int cardnr;
 
-#ifndef CONFIG_PCI_LEGACY
+	icard.para[0] = (unsigned long) pdev;
+	if (!avm_protocol)
+		icard.protocol = DEFAULT_PROTO;
+	else
+		icard.protocol = avm_protocol;
+
+	cardnr = hisax_init_hotplug(&icard, avm_pnp_setup);
+	if (cardnr < 0)
+		return -ENODEV;
+	
+	pnp_set_drvdata(pdev, (void *)(unsigned long) cardnr);
+	return 0;
+}
 
-static int __devinit avm_pci_setup(struct IsdnCardState *cs)
+static void __devexit avm_pnp_remove_one(struct pnp_dev *pdev)
 {
-	return(1);	/* no-op: success */
+	int cardnr = (unsigned long) pnp_get_drvdata(pdev);
+
+	HiSax_closecard(cardnr);
 }
 
-#else
+static struct pnp_device_id avm_pnp_table[] = {
+	{ .id = "AVM0900", },
 
-static struct pci_dev *dev_avm __devinitdata = NULL;
+	{ .id = "" }		/* terminate list */
+};
 
-static int __devinit avm_pci_setup(struct IsdnCardState *cs)
-{
-	if ((dev_avm = pci_find_device(PCI_VENDOR_ID_AVM,
-		PCI_DEVICE_ID_AVM_A1, dev_avm))) {
+static struct pnp_driver avm_pnp_driver = {
+	.name		= "avm_pci",
+	.id_table	= avm_pnp_table,
+	.probe		= avm_pnp_init_one,
+	.remove		= __devexit_p(avm_pnp_remove_one),
+};
+#endif /* CONFIG_PNP */
+#endif /* CONFIG_ISA */
 
-		if (pci_enable_device(dev_avm))
-			return(0);
+#ifdef CONFIG_PCI
 
-		cs->irq = dev_avm->irq;
-		if (!cs->irq) {
-			printk(KERN_ERR "FritzPCI: No IRQ for PCI card found\n");
-			return(0);
-		}
+static int __devinit avm_pci_setup(struct IsdnCard *card)
+{
+	struct IsdnCardState *cs = card->cs;
+	struct pci_dev *dev_avm = (void *) card->para[0];
 
-		cs->hw.avm.cfg_reg = pci_resource_start(dev_avm, 1);
-		if (!cs->hw.avm.cfg_reg) {
-			printk(KERN_ERR "FritzPCI: No IO-Adr for PCI card found\n");
-			return(0);
-		}
+	if (pci_enable_device(dev_avm))
+		return(0);
 
-		cs->subtyp = AVM_FRITZ_PCI;
-	} else {
-		printk(KERN_WARNING "FritzPCI: No PCI card found\n");
+	cs->irq = dev_avm->irq;
+	if (!cs->irq) {
+		printk(KERN_ERR "FritzPCI: No IRQ for PCI card found\n");
 		return(0);
 	}
 
+	cs->hw.avm.cfg_reg = pci_resource_start(dev_avm, 1);
+	if (!cs->hw.avm.cfg_reg) {
+		printk(KERN_ERR "FritzPCI: No IO-Adr for PCI card found\n");
+		return(0);
+	}
+
+	cs->subtyp = AVM_FRITZ_PCI;
+
 	cs->irq_flags |= IRQF_SHARED;
 
-	return (1);
+	return avm_setup_rest(cs);
 }
 
-#endif /* CONFIG_PCI_LEGACY */
-
-int __devinit
-setup_avm_pcipnp(struct IsdnCard *card)
+static int __devinit avm_pci_init_one(struct pci_dev *pdev,
+				      const struct pci_device_id *ent)
 {
-	struct IsdnCardState *cs = card->cs;
-	char tmp[64];
-	int rc;
+	struct IsdnCard icard = { ISDN_CTYPE_FRITZPCI, };
+	int cardnr;
 
-	strcpy(tmp, avm_pci_rev);
-	printk(KERN_INFO "HiSax: AVM PCI driver Rev. %s\n", HiSax_getrev(tmp));
+	icard.para[0] = (unsigned long) pdev;
+	if (!avm_protocol)
+		icard.protocol = DEFAULT_PROTO;
+	else
+		icard.protocol = avm_protocol;
+
+	cardnr = hisax_init_hotplug(&icard, avm_pci_setup);
+	if (cardnr < 0)
+		return -ENODEV;
+	
+	pci_set_drvdata(pdev, (void *)(unsigned long) cardnr);
+	return 0;
+}
 
-	if (cs->typ != ISDN_CTYPE_FRITZPCI)
-		return (0);
+static struct pci_device_id avm_pci_table[] = {
+	{ PCI_VDEVICE(AVM, PCI_DEVICE_ID_AVM_A1) },
+
+	{ }		/* terminate list */
+};
+
+static struct pci_driver avm_pci_driver = {
+	.name		= "avm_pci",
+	.id_table	= avm_pci_table,
+	.probe		= avm_pci_init_one,
+	.remove		= hisax_pci_remove_one,
+};
+
+#endif /* CONFIG_PCI */
 
-	if (card->para[1]) {
-		/* old manual method */
-		cs->hw.avm.cfg_reg = card->para[1];
-		cs->irq = card->para[0];
-		cs->subtyp = AVM_FRITZ_PNP;
-		goto ready;
+static int __init avm_mod_init(void)
+{
+	int rc = 0;
+
+#ifdef CONFIG_ISA
+	if (avm_irq && avm_io_base) {
+		rc = isa_register_driver(&avm_isa_driver, 1);
+		if (rc)
+			return rc;
+	}
+#ifdef CONFIG_PNP
+	else {
+		rc = pnp_register_driver(&avm_pnp_driver);
+		if (rc)
+			return rc;
 	}
+#endif
+#endif /* CONFIG_ISA */
 
-	rc = avm_pnp_setup(cs);
-	if (rc < 1)
-		return (0);
-	if (rc == 2)
-		goto ready;
+#ifdef CONFIG_PCI
+	rc = pci_register_driver(&avm_pci_driver);
+	if (rc)
+		goto err_out_isa;
+#endif /* CONFIG_PCI */
 
-	rc = avm_pci_setup(cs);
-	if (rc < 1)
-		return (0);
+	return 0;
 
-ready:
-	return avm_setup_rest(cs);
+#ifdef CONFIG_PCI
+err_out_isa:
+
+#ifdef CONFIG_ISA
+	if (avm_irq && avm_io_base)
+		isa_unregister_driver(&avm_isa_driver);
+#ifdef CONFIG_PNP
+	else
+		pnp_unregister_driver(&avm_pnp_driver);
+#endif /* CONFIG_PNP */
+#endif /* CONFIG_ISA */
+
+	return rc;
+#endif /* CONFIG_PCI */
 }
+
+static void __exit avm_mod_exit(void)
+{
+#ifdef CONFIG_PCI
+	pci_unregister_driver(&avm_pci_driver);
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_ISA
+	if (avm_irq && avm_io_base)
+		isa_unregister_driver(&avm_isa_driver);
+#ifdef CONFIG_PNP
+	else
+		pnp_unregister_driver(&avm_pnp_driver);
+#endif /* CONFIG_PNP */
+#endif /* CONFIG_ISA */
+}
+
+module_init(avm_mod_init);
+module_exit(avm_mod_exit);
+
+#ifdef CONFIG_ISA
+module_param_named(irq, avm_irq, int, 0444);
+MODULE_PARM_DESC(irq, "ISA IRQ.  Zero disables ISA support (default).");
+
+module_param_named(io, avm_io_base, int, 0444);
+MODULE_PARM_DESC(io, "ISA I/O base.  Zero disables ISA support (default).");
+#endif /* CONFIG_ISA */
+
+module_param_named(protocol, avm_protocol, int, 0444);
+MODULE_PARM_DESC(protocol, "Values 0 (default) through 4. See ISDN_PTYPE_xxx in linux/isdnif.h");
+
+MODULE_DEVICE_TABLE(pci, avm_pci_table);
+MODULE_DESCRIPTION("ISDN HiSax Fritz!PCI/PNP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 77c00c9..62e4b85 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -117,13 +117,6 @@ const char *CardType[] = {
 #define DEFAULT_CFG {11,0x170,0,0}
 #endif
 
-#ifdef CONFIG_HISAX_FRITZPCI
-#undef DEFAULT_CARD
-#undef DEFAULT_CFG
-#define DEFAULT_CARD ISDN_CTYPE_FRITZPCI
-#define DEFAULT_CFG {0,0,0,0}
-#endif
-
 #ifdef CONFIG_HISAX_16_3
 #undef DEFAULT_CARD
 #undef DEFAULT_CFG
@@ -421,10 +414,6 @@ extern int setup_avm_a1(struct IsdnCard *card);
 extern int setup_avm_a1_pcmcia(struct IsdnCard *card);
 #endif
 
-#if CARD_FRITZPCI
-extern int setup_avm_pcipnp(struct IsdnCard *card);
-#endif
-
 #if CARD_ELSA
 extern int setup_elsa(struct IsdnCard *card);
 #endif
@@ -793,11 +782,6 @@ static int __devinit hisax_cs_setup_card(struct IsdnCard *card)
 		ret = setup_avm_a1_pcmcia(card);
 		break;
 #endif
-#if CARD_FRITZPCI
-	case ISDN_CTYPE_FRITZPCI:
-		ret = setup_avm_pcipnp(card);
-		break;
-#endif
 #if CARD_ELSA
 	case ISDN_CTYPE_ELSA:
 	case ISDN_CTYPE_ELSA_PNP:
@@ -890,6 +874,7 @@ static int __devinit hisax_cs_setup_card(struct IsdnCard *card)
 	case ISDN_CTYPE_NETJET_S:
 	case ISDN_CTYPE_NETJET_U:
 	case ISDN_CTYPE_TELESPCI:
+	case ISDN_CTYPE_FRITZPCI:
 		printk(KERN_WARNING "HiSax: Support for %s Card has moved "
 		       "to separate PCI driver module\n",
 		       CardType[card->typ]);
@@ -1336,7 +1321,6 @@ static int __init HiSax_init(void)
 		case ISDN_CTYPE_TELES3C:
 		case ISDN_CTYPE_ACERP10:
 		case ISDN_CTYPE_S0BOX:
-		case ISDN_CTYPE_FRITZPCI:
 		case ISDN_CTYPE_HSTSAPHIR:
 		case ISDN_CTYPE_GAZEL:
 		case ISDN_CTYPE_HFC_SX:
@@ -1360,6 +1344,7 @@ static int __init HiSax_init(void)
 		case ISDN_CTYPE_NETJET_S:
 		case ISDN_CTYPE_NETJET_U:
 		case ISDN_CTYPE_TELESPCI:
+		case ISDN_CTYPE_FRITZPCI:
 			break;
 
 		case ISDN_CTYPE_SCT_QUADRO:
@@ -1833,9 +1818,6 @@ static void EChannel_proc_rcv(struct hisax_d_if *d_if)
 #include <linux/pci.h>
 
 static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
-#ifdef CONFIG_HISAX_FRITZPCI
-	{PCI_VENDOR_ID_AVM,      PCI_DEVICE_ID_AVM_A1,           PCI_ANY_ID, PCI_ANY_ID},
-#endif
 #ifdef CONFIG_HISAX_DIEHLDIVA
 	{PCI_VENDOR_ID_EICON,    PCI_DEVICE_ID_EICON_DIVA20,     PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_EICON,    PCI_DEVICE_ID_EICON_DIVA20_U,   PCI_ANY_ID, PCI_ANY_ID},
-- 
1.5.3.8


  parent reply	other threads:[~2008-02-14 23:44 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-18  3:04 [PATCH 00/14] [ISDN] HiSax hotplug conversion Jeff Garzik
2007-07-18  3:04 ` [PATCH 01/14] [ISDN] HiSax: modularize card setup Jeff Garzik
2008-02-15 13:38   ` Sam Ravnborg
2007-07-18  3:46 ` [PATCH 04/14] [ISDN] HiSax bkm_a4t: convert to PCI hotplug API Jeff Garzik
2008-02-15 13:33   ` Sam Ravnborg
2007-07-18  3:49 ` [PATCH 05/14] [ISDN] HiSax enternow: " Jeff Garzik
2008-02-15 13:21   ` Jan Engelhardt
2007-07-18  3:54 ` [PATCH 06/14] [ISDN] HiSax hfc_pci, w6692: " Jeff Garzik
2007-07-18  3:59 ` [PATCH 07/14] [ISDN] HiSax nj_s, nj_u: " Jeff Garzik
2007-07-18  4:02 ` [PATCH 08/14] [ISDN] HiSax telespci: " Jeff Garzik
2007-07-24 12:26 ` [PATCH 11/14] [ISDN] HiSax niccy: convert to modern ISA/PNP/PCI probing Jeff Garzik
2007-08-02 12:37 ` [PATCH 13/14] [ISDN] HiSax bkm_a8: convert to PCI hotplug API Jeff Garzik
2007-10-31  5:10 ` [PATCH 03/14] [ISDN] Ready HiSax driver for modularization Jeff Garzik
2008-02-15 13:45   ` Sam Ravnborg
2007-10-31  5:11 ` Jeff Garzik [this message]
2007-10-31  5:12 ` [PATCH 10/14] [ISDN] HiSax gazel: convert to modern ISA/PCI probing Jeff Garzik
2007-10-31  5:13 ` [PATCH 12/14] [ISDN] HiSax diva: convert to modern ISA/PNP/PCI probing Jeff Garzik
2007-10-31  7:42 ` [PATCH 02/14] [ISDN] Hisax: eliminate many unnecessary references to CardType[] Jeff Garzik
2008-02-15 13:37   ` Sam Ravnborg
2007-11-06 14:41 ` [PATCH 14/14] [isdn-pci] add missing file Jeff Garzik
2008-02-14 23:52 ` [PATCH 00/14] [ISDN] HiSax hotplug conversion Greg KH
2008-02-14 23:50   ` Jeff Garzik
2008-02-14 23:53 ` Jeff Garzik
2008-02-15 13:27 ` Sam Ravnborg
2008-02-15 15:13   ` Jeff Garzik
2008-02-15 19:11     ` Sam Ravnborg
2008-02-16  1:09 ` Andrew Morton
2008-02-16  4:41 [PATCH 01/14] [ISDN] HiSax: modularization prep Jeff Garzik
2007-10-31  5:11 ` [PATCH 09/14] [ISDN] HiSax avm_pci: convert to modern PCI/ISA/PNP probing Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=005a21707b8b2c4010e2e6dcc878b85b8f3be142.1203031878.git.jeff@garzik.org \
    --to=jeff@garzik.org \
    --cc=isdn4linux@listserv.isdn4linux.de \
    --cc=kkeil@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH 09/14] [ISDN] HiSax avm_pci: convert to modern PCI/ISA/PNP probing' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).