LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Giulio Benetti <giulio.benetti@micronovasrl.com>
To: a.zummo@towertech.it, alexandre.belloni@bootlin.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
	linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, andy.shevchenko@gmail.com
Subject: Re: [PATCH v6 4/4] rtc: ds1307: add frequency_test_enable sysfs attribute to check tick on m41txx
Date: Wed, 16 May 2018 23:09:21 +0200	[thread overview]
Message-ID: <0101cc06-acec-b4ec-3f9d-6a2b4a904390@micronovasrl.com> (raw)
In-Reply-To: <20180516210705.5824-4-giulio.benetti@micronovasrl.com>

Sorry, no V5 => V6 changelog, I resubmit.

Il 16/05/2018 23:07, Giulio Benetti ha scritto:
> On m41txx you can enable open-drain OUT pin to check if offset is ok.
> Enabling OUT pin with frequency_test_enable attribute, OUT pin will tick
> 512 times faster than 1s tick base.
> 
> Enable or Disable FT bit on CONTROL register if freq_test is 1 or 0.
> 
> Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
> ---
>   drivers/rtc/rtc-ds1307.c | 96 ++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 96 insertions(+)
> 
> diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> index 2797d01bfa1d..b2e87845d860 100644
> --- a/drivers/rtc/rtc-ds1307.c
> +++ b/drivers/rtc/rtc-ds1307.c
> @@ -1053,6 +1053,96 @@ static int m41txx_rtc_set_offset(struct device *dev, long offset)
>   				  ctrl_reg);
>   }
>   
> +static ssize_t frequency_test_enable_store(struct device *dev,
> +					   struct device_attribute *attr,
> +					   const char *buf, size_t count)
> +{
> +	struct ds1307 *ds1307 = dev_get_drvdata(dev);
> +	bool freq_test_en = 0;
> +	int ret;
> +
> +	ret = kstrtobool(buf, &freq_test_en);
> +	if (ret == -EINVAL) {
> +		dev_err(dev, "Failed to store RTC Frequency Test attribute\n");
> +		return ret;
> +	}
> +
> +	regmap_update_bits(ds1307->regmap, M41TXX_REG_CONTROL, M41TXX_BIT_FT,
> +			   freq_test_en ? M41TXX_BIT_FT : 0);
> +
> +	return count;
> +}
> +
> +static ssize_t frequency_test_enable_show(struct device *dev,
> +					  struct device_attribute *attr,
> +					  char *buf)
> +{
> +	struct ds1307 *ds1307 = dev_get_drvdata(dev);
> +	unsigned int ctrl_reg;
> +
> +	regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
> +
> +	if (ctrl_reg & M41TXX_BIT_FT)
> +		return scnprintf(buf, PAGE_SIZE, "on\n");
> +	else
> +		return scnprintf(buf, PAGE_SIZE, "off\n");
> +}
> +
> +static DEVICE_ATTR_RW(frequency_test_enable);
> +
> +static struct attribute *rtc_freq_test_attrs[] = {
> +	&dev_attr_frequency_test_enable.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group rtc_freq_test_attr_group = {
> +	.attrs		= rtc_freq_test_attrs,
> +};
> +
> +static void rtc_calib_remove_sysfs_group(void *_dev)
> +{
> +	struct device *dev = _dev;
> +
> +	sysfs_remove_group(&dev->kobj, &rtc_freq_test_attr_group);
> +}
> +
> +static int ds1307_add_frequency_test(struct ds1307 *ds1307)
> +{
> +	int err = 0;
> +
> +	switch (ds1307->type) {
> +	case m41t0:
> +	case m41t00:
> +	case m41t11:
> +		/* Export sysfs entries */
> +		err = sysfs_create_group(&(ds1307->dev)->kobj,
> +					 &rtc_freq_test_attr_group);
> +		if (err) {
> +			dev_err(ds1307->dev,
> +				"Failed to create sysfs group: %d\n",
> +				err);
> +			return err;
> +		}
> +
> +		err = devm_add_action_or_reset(ds1307->dev,
> +					       rtc_calib_remove_sysfs_group,
> +					       ds1307->dev);
> +		if (err) {
> +			dev_err(ds1307->dev,
> +				"Failed to add sysfs cleanup action: %d\n",
> +				err);
> +			sysfs_remove_group(&(ds1307->dev)->kobj,
> +					   &rtc_freq_test_attr_group);
> +			return err;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return err;
> +}
> +
>   /*----------------------------------------------------------------------*/
>   
>   static int ds1307_nvram_read(void *priv, unsigned int offset, void *val,
> @@ -1794,6 +1884,12 @@ static int ds1307_probe(struct i2c_client *client,
>   	if (err)
>   		return err;
>   
> +	err = ds1307_add_frequency_test(ds1307);
> +	if (err) {
> +		rtc_device_unregister(ds1307->rtc);
> +		return err;
> +	}
> +
>   	if (chip->nvram_size) {
>   		struct nvmem_config nvmem_cfg = {
>   			.name = "ds1307_nvram",
> 

  reply	other threads:[~2018-05-16 21:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-16 21:07 [PATCH v6 1/4] rtc: ds1307: fix data pointer to m41t0 Giulio Benetti
2018-05-16 21:07 ` [PATCH v6 2/4] rtc: ds1307: support m41t11 variant Giulio Benetti
2018-05-16 21:07 ` [PATCH v6 3/4] rtc: ds1307: add offset sysfs for mt41txx chips Giulio Benetti
2018-05-16 21:07 ` [PATCH v6 4/4] rtc: ds1307: add frequency_test_enable sysfs attribute to check tick on m41txx Giulio Benetti
2018-05-16 21:09   ` Giulio Benetti [this message]
2018-05-16 21:08 [PATCH v6 1/4] rtc: ds1307: fix data pointer to m41t0 Giulio Benetti
2018-05-16 21:08 ` [PATCH v6 4/4] rtc: ds1307: add frequency_test_enable sysfs attribute to check tick on m41txx Giulio Benetti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0101cc06-acec-b4ec-3f9d-6a2b4a904390@micronovasrl.com \
    --to=giulio.benetti@micronovasrl.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v6 4/4] rtc: ds1307: add frequency_test_enable sysfs attribute to check tick on m41txx' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).