LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v2 2/3] staging: r8188eu: Remove code depending on NAT25_LOOKUP
@ 2021-08-16 17:51 Fabio M. De Francesco
  2021-08-16 19:52 ` Michael Straube
  2021-08-17 17:55 ` Greg Kroah-Hartman
  0 siblings, 2 replies; 4+ messages in thread
From: Fabio M. De Francesco @ 2021-08-16 17:51 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Larry Finger, Phillip Potter, Martin Kaiser,
	Michael Straube, linux-staging, linux-kernel
  Cc: Fabio M. De Francesco

Remove all the code related to the management of the NAT25_LOOKUP
method in nat25_db_handle(). The only function that used that method was
the now deleted nat25_handle_frame(). Remove the NAT25_LOOKUP entry from
the NAT25_METHOD enum because it is not anymore used everywhere else in
the code of the driver.

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---

v2: Patch rebased against the latest Greg K-H's tree.

 drivers/staging/r8188eu/core/rtw_br_ext.c    | 112 -------------------
 drivers/staging/r8188eu/include/rtw_br_ext.h |   1 -
 2 files changed, 113 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_br_ext.c b/drivers/staging/r8188eu/core/rtw_br_ext.c
index e8eea95a52e3..0402f48319c4 100644
--- a/drivers/staging/r8188eu/core/rtw_br_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_br_ext.c
@@ -484,27 +484,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 
 			__nat25_db_print(priv);
 			return 0;
-		case NAT25_LOOKUP:
-			DEBUG_INFO("NAT25: Lookup IP, SA =%08x, DA =%08x\n", iph->saddr, iph->daddr);
-			tmp = be32_to_cpu(iph->daddr);
-			__nat25_generate_ipv4_network_addr(networkAddr, &tmp);
-
-			if (!__nat25_db_network_lookup_and_replace(priv, skb, networkAddr)) {
-				if (*((unsigned char *)&iph->daddr + 3) == 0xff) {
-					/*  L2 is unicast but L3 is broadcast, make L2 bacome broadcast */
-					DEBUG_INFO("NAT25: Set DA as boardcast\n");
-					memset(skb->data, 0xff, ETH_ALEN);
-				} else {
-					/*  forward unknow IP packet to upper TCP/IP */
-					DEBUG_INFO("NAT25: Replace DA with BR's MAC\n");
-					if ((*(u32 *)priv->br_mac) == 0 && (*(u16 *)(priv->br_mac+4)) == 0) {
-						printk("Re-init netdev_br_init() due to br_mac == 0!\n");
-						netdev_br_init(priv->pnetdev);
-					}
-					memcpy(skb->data, priv->br_mac, ETH_ALEN);
-				}
-			}
-			return 0;
 		default:
 			return -1;
 		}
@@ -536,20 +515,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 			__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
 			__nat25_db_print(priv);
 			return 0;
-		case NAT25_LOOKUP:
-			DEBUG_INFO("NAT25: Lookup ARP\n");
-
-			arp_ptr += arp->ar_hln;
-			sender = (unsigned int *)arp_ptr;
-			arp_ptr += (arp->ar_hln + arp->ar_pln);
-			target = (unsigned int *)arp_ptr;
-			__nat25_generate_ipv4_network_addr(networkAddr, target);
-			__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
-			/*  change to ARP target mac address to Lookup result */
-			arp_ptr = (unsigned char *)(arp + 1);
-			arp_ptr += (arp->ar_hln + arp->ar_pln);
-			memcpy(arp_ptr, skb->data, ETH_ALEN);
-			return 0;
 		default:
 			return -1;
 		}
@@ -637,70 +602,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 					priv->pppoe_connection_in_progress = 0;
 			}
 			return 0;
-		case NAT25_LOOKUP:
-			if (ph->code == PADO_CODE || ph->code == PADS_CODE) {
-				if (priv->ethBrExtInfo.addPPPoETag) {
-					struct pppoe_tag *tag;
-					unsigned char *ptr;
-					unsigned short tagType, tagLen;
-					int offset = 0;
-
-					ptr = __nat25_find_pppoe_tag(ph, ntohs(PTT_RELAY_SID));
-					if (!ptr) {
-						DEBUG_ERR("Fail to find PTT_RELAY_SID in FADO!\n");
-						return -1;
-					}
-
-					tag = (struct pppoe_tag *)ptr;
-					tagType = (unsigned short)((ptr[0] << 8) + ptr[1]);
-					tagLen = (unsigned short)((ptr[2] << 8) + ptr[3]);
-
-					if ((tagType != ntohs(PTT_RELAY_SID)) || (tagLen < (MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN))) {
-						DEBUG_ERR("Invalid PTT_RELAY_SID tag length [%d]!\n", tagLen);
-						return -1;
-					}
-
-					pMagic = (unsigned short *)tag->tag_data;
-					if (ntohs(*pMagic) != MAGIC_CODE) {
-						DEBUG_ERR("Can't find MAGIC_CODE in %s packet!\n",
-							(ph->code == PADO_CODE ? "PADO" : "PADS"));
-						return -1;
-					}
-
-					memcpy(skb->data, tag->tag_data+MAGIC_CODE_LEN, ETH_ALEN);
-
-					if (tagLen > MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN)
-						offset = TAG_HDR_LEN;
-
-					if (skb_pull_and_merge(skb, ptr+offset, TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset) < 0) {
-						DEBUG_ERR("call skb_pull_and_merge() failed in PADO packet!\n");
-						return -1;
-					}
-					ph->length = htons(ntohs(ph->length)-(TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset));
-					if (offset > 0)
-						tag->tag_len = htons(tagLen-MAGIC_CODE_LEN-RTL_RELAY_TAG_LEN);
-
-					DEBUG_INFO("NAT25: Lookup PPPoE, forward %s Packet from %s\n",
-						(ph->code == PADO_CODE ? "PADO" : "PADS"),	skb->dev->name);
-				} else { /*  not add relay tag */
-					if (!priv->pppoe_connection_in_progress) {
-						DEBUG_ERR("Discard PPPoE packet due to no connection in progresss!\n");
-						return -1;
-					}
-					memcpy(skb->data, priv->pppoe_addr, ETH_ALEN);
-					priv->pppoe_connection_in_progress = WAIT_TIME_PPPOE;
-				}
-			} else {
-				if (ph->sid != 0) {
-					DEBUG_INFO("NAT25: Lookup PPPoE, lookup session packet from %s\n", skb->dev->name);
-					__nat25_generate_pppoe_network_addr(networkAddr, skb->data+ETH_ALEN, &ph->sid);
-					__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
-					__nat25_db_print(priv);
-				} else {
-					return -1;
-				}
-			}
-			return 0;
 		default:
 			return -1;
 		}
@@ -713,8 +614,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 			return -1;
 		case NAT25_INSERT:
 			return 0;
-		case NAT25_LOOKUP:
-			return 0;
 		default:
 			return -1;
 		}
@@ -727,8 +626,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 			return -1;
 		case NAT25_INSERT:
 			return 0;
-		case NAT25_LOOKUP:
-			return 0;
 		default:
 			return -1;
 		}
@@ -775,15 +672,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
 				}
 			}
 			return 0;
-		case NAT25_LOOKUP:
-			DEBUG_INFO("NAT25: Lookup IP, SA =%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x, DA =%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x\n",
-				   iph->saddr.s6_addr16[0], iph->saddr.s6_addr16[1], iph->saddr.s6_addr16[2], iph->saddr.s6_addr16[3],
-				   iph->saddr.s6_addr16[4], iph->saddr.s6_addr16[5], iph->saddr.s6_addr16[6], iph->saddr.s6_addr16[7],
-				   iph->daddr.s6_addr16[0], iph->daddr.s6_addr16[1], iph->daddr.s6_addr16[2], iph->daddr.s6_addr16[3],
-				   iph->daddr.s6_addr16[4], iph->daddr.s6_addr16[5], iph->daddr.s6_addr16[6], iph->daddr.s6_addr16[7]);
-			__nat25_generate_ipv6_network_addr(networkAddr, (unsigned int *)&iph->daddr);
-			__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
-			return 0;
 		default:
 			return -1;
 		}
diff --git a/drivers/staging/r8188eu/include/rtw_br_ext.h b/drivers/staging/r8188eu/include/rtw_br_ext.h
index 00d461c4c6fa..69905d30c191 100644
--- a/drivers/staging/r8188eu/include/rtw_br_ext.h
+++ b/drivers/staging/r8188eu/include/rtw_br_ext.h
@@ -31,7 +31,6 @@ enum NAT25_METHOD {
 	NAT25_MIN,
 	NAT25_CHECK,
 	NAT25_INSERT,
-	NAT25_LOOKUP,
 	NAT25_PARSE,
 	NAT25_MAX
 };
-- 
2.32.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2 2/3] staging: r8188eu: Remove code depending on NAT25_LOOKUP
  2021-08-16 17:51 [PATCH v2 2/3] staging: r8188eu: Remove code depending on NAT25_LOOKUP Fabio M. De Francesco
@ 2021-08-16 19:52 ` Michael Straube
  2021-08-17 17:55 ` Greg Kroah-Hartman
  1 sibling, 0 replies; 4+ messages in thread
From: Michael Straube @ 2021-08-16 19:52 UTC (permalink / raw)
  To: Fabio M. De Francesco, Greg Kroah-Hartman, Larry Finger,
	Phillip Potter, Martin Kaiser, linux-staging, linux-kernel

On 8/16/21 7:51 PM, Fabio M. De Francesco wrote:
> Remove all the code related to the management of the NAT25_LOOKUP
> method in nat25_db_handle(). The only function that used that method was
> the now deleted nat25_handle_frame(). Remove the NAT25_LOOKUP entry from
> the NAT25_METHOD enum because it is not anymore used everywhere else in
> the code of the driver.
> 
> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
> ---
> 
> v2: Patch rebased against the latest Greg K-H's tree.
> 
>   drivers/staging/r8188eu/core/rtw_br_ext.c    | 112 -------------------
>   drivers/staging/r8188eu/include/rtw_br_ext.h |   1 -
>   2 files changed, 113 deletions(-)
> 
> diff --git a/drivers/staging/r8188eu/core/rtw_br_ext.c b/drivers/staging/r8188eu/core/rtw_br_ext.c
> index e8eea95a52e3..0402f48319c4 100644
> --- a/drivers/staging/r8188eu/core/rtw_br_ext.c
> +++ b/drivers/staging/r8188eu/core/rtw_br_ext.c
> @@ -484,27 +484,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
>   
>   			__nat25_db_print(priv);
>   			return 0;
> -		case NAT25_LOOKUP:
> -			DEBUG_INFO("NAT25: Lookup IP, SA =%08x, DA =%08x\n", iph->saddr, iph->daddr);
> -			tmp = be32_to_cpu(iph->daddr);
> -			__nat25_generate_ipv4_network_addr(networkAddr, &tmp);
> -
> -			if (!__nat25_db_network_lookup_and_replace(priv, skb, networkAddr)) {
> -				if (*((unsigned char *)&iph->daddr + 3) == 0xff) {
> -					/*  L2 is unicast but L3 is broadcast, make L2 bacome broadcast */
> -					DEBUG_INFO("NAT25: Set DA as boardcast\n");
> -					memset(skb->data, 0xff, ETH_ALEN);
> -				} else {
> -					/*  forward unknow IP packet to upper TCP/IP */
> -					DEBUG_INFO("NAT25: Replace DA with BR's MAC\n");
> -					if ((*(u32 *)priv->br_mac) == 0 && (*(u16 *)(priv->br_mac+4)) == 0) {
> -						printk("Re-init netdev_br_init() due to br_mac == 0!\n");
> -						netdev_br_init(priv->pnetdev);
> -					}
> -					memcpy(skb->data, priv->br_mac, ETH_ALEN);
> -				}
> -			}
> -			return 0;
>   		default:
>   			return -1;
>   		}
> @@ -536,20 +515,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
>   			__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
>   			__nat25_db_print(priv);
>   			return 0;
> -		case NAT25_LOOKUP:
> -			DEBUG_INFO("NAT25: Lookup ARP\n");
> -
> -			arp_ptr += arp->ar_hln;
> -			sender = (unsigned int *)arp_ptr;
> -			arp_ptr += (arp->ar_hln + arp->ar_pln);
> -			target = (unsigned int *)arp_ptr;
> -			__nat25_generate_ipv4_network_addr(networkAddr, target);
> -			__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
> -			/*  change to ARP target mac address to Lookup result */
> -			arp_ptr = (unsigned char *)(arp + 1);
> -			arp_ptr += (arp->ar_hln + arp->ar_pln);
> -			memcpy(arp_ptr, skb->data, ETH_ALEN);
> -			return 0;
>   		default:
>   			return -1;
>   		}
> @@ -637,70 +602,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
>   					priv->pppoe_connection_in_progress = 0;
>   			}
>   			return 0;
> -		case NAT25_LOOKUP:
> -			if (ph->code == PADO_CODE || ph->code == PADS_CODE) {
> -				if (priv->ethBrExtInfo.addPPPoETag) {
> -					struct pppoe_tag *tag;
> -					unsigned char *ptr;
> -					unsigned short tagType, tagLen;
> -					int offset = 0;
> -
> -					ptr = __nat25_find_pppoe_tag(ph, ntohs(PTT_RELAY_SID));
> -					if (!ptr) {
> -						DEBUG_ERR("Fail to find PTT_RELAY_SID in FADO!\n");
> -						return -1;
> -					}
> -
> -					tag = (struct pppoe_tag *)ptr;
> -					tagType = (unsigned short)((ptr[0] << 8) + ptr[1]);
> -					tagLen = (unsigned short)((ptr[2] << 8) + ptr[3]);
> -
> -					if ((tagType != ntohs(PTT_RELAY_SID)) || (tagLen < (MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN))) {
> -						DEBUG_ERR("Invalid PTT_RELAY_SID tag length [%d]!\n", tagLen);
> -						return -1;
> -					}
> -
> -					pMagic = (unsigned short *)tag->tag_data;
> -					if (ntohs(*pMagic) != MAGIC_CODE) {
> -						DEBUG_ERR("Can't find MAGIC_CODE in %s packet!\n",
> -							(ph->code == PADO_CODE ? "PADO" : "PADS"));
> -						return -1;
> -					}
> -
> -					memcpy(skb->data, tag->tag_data+MAGIC_CODE_LEN, ETH_ALEN);
> -
> -					if (tagLen > MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN)
> -						offset = TAG_HDR_LEN;
> -
> -					if (skb_pull_and_merge(skb, ptr+offset, TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset) < 0) {
> -						DEBUG_ERR("call skb_pull_and_merge() failed in PADO packet!\n");
> -						return -1;
> -					}
> -					ph->length = htons(ntohs(ph->length)-(TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset));
> -					if (offset > 0)
> -						tag->tag_len = htons(tagLen-MAGIC_CODE_LEN-RTL_RELAY_TAG_LEN);
> -
> -					DEBUG_INFO("NAT25: Lookup PPPoE, forward %s Packet from %s\n",
> -						(ph->code == PADO_CODE ? "PADO" : "PADS"),	skb->dev->name);
> -				} else { /*  not add relay tag */
> -					if (!priv->pppoe_connection_in_progress) {
> -						DEBUG_ERR("Discard PPPoE packet due to no connection in progresss!\n");
> -						return -1;
> -					}
> -					memcpy(skb->data, priv->pppoe_addr, ETH_ALEN);
> -					priv->pppoe_connection_in_progress = WAIT_TIME_PPPOE;
> -				}
> -			} else {
> -				if (ph->sid != 0) {
> -					DEBUG_INFO("NAT25: Lookup PPPoE, lookup session packet from %s\n", skb->dev->name);
> -					__nat25_generate_pppoe_network_addr(networkAddr, skb->data+ETH_ALEN, &ph->sid);
> -					__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
> -					__nat25_db_print(priv);
> -				} else {
> -					return -1;
> -				}
> -			}
> -			return 0;
>   		default:
>   			return -1;
>   		}
> @@ -713,8 +614,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
>   			return -1;
>   		case NAT25_INSERT:
>   			return 0;
> -		case NAT25_LOOKUP:
> -			return 0;
>   		default:
>   			return -1;
>   		}
> @@ -727,8 +626,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
>   			return -1;
>   		case NAT25_INSERT:
>   			return 0;
> -		case NAT25_LOOKUP:
> -			return 0;
>   		default:
>   			return -1;
>   		}
> @@ -775,15 +672,6 @@ int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method)
>   				}
>   			}
>   			return 0;
> -		case NAT25_LOOKUP:
> -			DEBUG_INFO("NAT25: Lookup IP, SA =%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x, DA =%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x\n",
> -				   iph->saddr.s6_addr16[0], iph->saddr.s6_addr16[1], iph->saddr.s6_addr16[2], iph->saddr.s6_addr16[3],
> -				   iph->saddr.s6_addr16[4], iph->saddr.s6_addr16[5], iph->saddr.s6_addr16[6], iph->saddr.s6_addr16[7],
> -				   iph->daddr.s6_addr16[0], iph->daddr.s6_addr16[1], iph->daddr.s6_addr16[2], iph->daddr.s6_addr16[3],
> -				   iph->daddr.s6_addr16[4], iph->daddr.s6_addr16[5], iph->daddr.s6_addr16[6], iph->daddr.s6_addr16[7]);
> -			__nat25_generate_ipv6_network_addr(networkAddr, (unsigned int *)&iph->daddr);
> -			__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
> -			return 0;
>   		default:
>   			return -1;
>   		}
> diff --git a/drivers/staging/r8188eu/include/rtw_br_ext.h b/drivers/staging/r8188eu/include/rtw_br_ext.h
> index 00d461c4c6fa..69905d30c191 100644
> --- a/drivers/staging/r8188eu/include/rtw_br_ext.h
> +++ b/drivers/staging/r8188eu/include/rtw_br_ext.h
> @@ -31,7 +31,6 @@ enum NAT25_METHOD {
>   	NAT25_MIN,
>   	NAT25_CHECK,
>   	NAT25_INSERT,
> -	NAT25_LOOKUP,
>   	NAT25_PARSE,
>   	NAT25_MAX
>   };
> 

Acked-by: Michael Straube <straube.linux@gmail.com>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2 2/3] staging: r8188eu: Remove code depending on NAT25_LOOKUP
  2021-08-16 17:51 [PATCH v2 2/3] staging: r8188eu: Remove code depending on NAT25_LOOKUP Fabio M. De Francesco
  2021-08-16 19:52 ` Michael Straube
@ 2021-08-17 17:55 ` Greg Kroah-Hartman
  2021-08-17 20:21   ` Fabio M. De Francesco
  1 sibling, 1 reply; 4+ messages in thread
From: Greg Kroah-Hartman @ 2021-08-17 17:55 UTC (permalink / raw)
  To: Fabio M. De Francesco
  Cc: Larry Finger, Phillip Potter, Martin Kaiser, Michael Straube,
	linux-staging, linux-kernel

On Mon, Aug 16, 2021 at 07:51:38PM +0200, Fabio M. De Francesco wrote:
> Remove all the code related to the management of the NAT25_LOOKUP
> method in nat25_db_handle(). The only function that used that method was
> the now deleted nat25_handle_frame(). Remove the NAT25_LOOKUP entry from
> the NAT25_METHOD enum because it is not anymore used everywhere else in
> the code of the driver.
> 
> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
> ---
> 
> v2: Patch rebased against the latest Greg K-H's tree.
> 
>  drivers/staging/r8188eu/core/rtw_br_ext.c    | 112 -------------------
>  drivers/staging/r8188eu/include/rtw_br_ext.h |   1 -
>  2 files changed, 113 deletions(-)

This change adds a build warning, which is not allowed.

Please merge this, and the 3/3 patch into a single change, so that it
all is removed together, causing no build warnings at any point in time.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2 2/3] staging: r8188eu: Remove code depending on NAT25_LOOKUP
  2021-08-17 17:55 ` Greg Kroah-Hartman
@ 2021-08-17 20:21   ` Fabio M. De Francesco
  0 siblings, 0 replies; 4+ messages in thread
From: Fabio M. De Francesco @ 2021-08-17 20:21 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Larry Finger, Phillip Potter, Martin Kaiser, Michael Straube,
	linux-staging, linux-kernel

On Tuesday, August 17, 2021 7:55:36 PM CEST Greg Kroah-Hartman wrote:
> On Mon, Aug 16, 2021 at 07:51:38PM +0200, Fabio M. De Francesco wrote:
> > Remove all the code related to the management of the NAT25_LOOKUP
> > method in nat25_db_handle(). The only function that used that method was
> > the now deleted nat25_handle_frame(). Remove the NAT25_LOOKUP entry from
> > the NAT25_METHOD enum because it is not anymore used everywhere else in
> > the code of the driver.
> > 
> > Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
> > ---
> > 
> > v2: Patch rebased against the latest Greg K-H's tree.
> > 
> >  drivers/staging/r8188eu/core/rtw_br_ext.c    | 112 -------------------
> >  drivers/staging/r8188eu/include/rtw_br_ext.h |   1 -
> >  2 files changed, 113 deletions(-)
> 
> This change adds a build warning, which is not allowed.
> 
> Please merge this, and the 3/3 patch into a single change, so that it
> all is removed together, causing no build warnings at any point in time.

Sorry, I didn't know that, within a series, no patch is allowed to add build warning
that are then fixed by the following ones. I did it for the purpose of splitting
different logical changes into different patches and the removal of code
related to NAT25_LOOKUP (2/3) introduced some warnings about a function
and a variable that were not anymore used. Patch 3/3 had the changes that
removed the above-mentioned no more used objects. 

According to your request, now I've merged 2/3 and 3/3 into a single v3 patch. 
I had to drop the numbering of the patch because neither 2/3 or 2/2 seemed 
appropriate to me after the merge. I hope it was the right thing to do. If not,
let me know, please.

Please see:
https://lore.kernel.org/lkml/20210817185723.15192-1-fmdefrancesco@gmail.com

Thanks,

Fabio

> thanks,
> 
> greg k-h
> 





^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-08-17 20:22 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-16 17:51 [PATCH v2 2/3] staging: r8188eu: Remove code depending on NAT25_LOOKUP Fabio M. De Francesco
2021-08-16 19:52 ` Michael Straube
2021-08-17 17:55 ` Greg Kroah-Hartman
2021-08-17 20:21   ` Fabio M. De Francesco

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).