LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Re: [patch] kill off PC9800
@ 2004-05-16  7:35 Norman Diamond
  2004-05-16 16:36 ` Adrian Bunk
  0 siblings, 1 reply; 21+ messages in thread
From: Norman Diamond @ 2004-05-16  7:35 UTC (permalink / raw)
  To: linux-kernel

Andrew Morton wrote:
> "Randy.Dunlap" <rddunlap@osdl.org> wrote:
> >
> >  PC9800 sub-arch is incomplete, hackish (at least in IDE), maintainers
> >  don't reply to emails and haven't touched it in awhile.
>
> And the hardware is obsolete, isn't it?  Does anyone know when they were
> last manufactured, and how popular they are?

Of course they aren't popular any more, but the last ones were still
respectably powerful and can run stuff like Windows 2000 Server.

When were PowerPC, MIPS (other than embedded), and Alpha chips last
manufactured, and how popular are they?

[By the way the above commendts do not reflect my personal opinion.  A few
years ago a friend got one free.  It wasn't one of the last and repectably
powerful ones, it had a 486 and 10MB of RAM.  It was amazingly hard to get
Windows 95 installed onto it, because I had no experience with the
architecture (other than having read a few things such as hard disk
partitions being DOS letters A, B, and then presumably E and upwards, and it
turned out that this wasn't true when booting from a floppy, and the PC98
version of Windows 95 confused itself too when doing its normal reboots from
the hard disk part way through installation...).  After being installed,
Windows 95 ran impressively well in 10MB of RAM.  The GUI responded to mouse
clicks immediately, none of the sluggishness normally associated with X11
Windows and XP Windows.  Even opening a document in WordPad came up without
waiting.  However, the installation process was so painful that I told my
friend my opinion of his computer.  Even when he got it free, it was worth
less than he paid for it.]


^ permalink raw reply	[flat|nested] 21+ messages in thread
* Re: [patch] kill off PC9800
@ 2004-05-16 17:50 James Bottomley
  2004-05-16 21:21 ` Andrew Morton
  0 siblings, 1 reply; 21+ messages in thread
From: James Bottomley @ 2004-05-16 17:50 UTC (permalink / raw)
  To: Andrew Morton, randy.dunlap; +Cc: Linux Kernel

    Randy.Dunlap" <rddunlap@osdl.org> wrote:
    >
    >  PC9800 sub-arch is incomplete, hackish (at least in IDE), maintainers
    >  don't reply to emails and haven't touched it in awhile.
    
    And the hardware is obsolete, isn't it?  Does anyone know when they were
    last manufactured, and how popular they are?
    
Hey, just being obsolete is no grounds for eliminating a
subarchitecture...

However, I would have to say that being unmaintained is.  Because of the
penchant of x86 people to go "it compiles on my PC, ship it", the x86
subarchitectures are about the fastest bitrotting pieces of the kernel
there are.

Since mach-pc9800 cannot currently be compiled and there's no evidence
that it actually was, I'd remove it unless someone steps up quickly to
maintain it (and get it to the point where it's actually compileable).

James



^ permalink raw reply	[flat|nested] 21+ messages in thread
* [patch] kill off PC9800
@ 2004-05-16  6:21 Randy.Dunlap
  2004-05-16  6:28 ` Andrew Morton
  0 siblings, 1 reply; 21+ messages in thread
From: Randy.Dunlap @ 2004-05-16  6:21 UTC (permalink / raw)
  To: akpm, lkml; +Cc: Bart

[-- Attachment #1: Type: text/plain, Size: 613 bytes --]


PC9800 sub-arch is incomplete, hackish (at least in IDE), maintainers
don't reply to emails and haven't touched it in awhile.
Can't even config it to try to build it without other patches
to the kernel tree.


full diff-style patch: [374 KB]
http://developer.osdl.org/rddunlap/patches/rm-pc9800.diff

bk-rm-script for complete files:  [also attached]
http://developer.osdl.org/rddunlap/patches/pc9800-kill.sh

Difference in first and second (for changes only, not including
'rm' of complete files):  [also attached]
http://developer.osdl.org/rddunlap/patches/rm-pc9800-bits.diff

Comments/feedback?

--
~Randy



[-- Attachment #2: pc9800-kill.sh --]
[-- Type: application/x-sh, Size: 781 bytes --]

[-- Attachment #3: rm-pc9800-bits.diff --]
[-- Type: application/octet-stream, Size: 19123 bytes --]


 drivers/block/Kconfig          |    9 -------
 drivers/char/Kconfig           |   22 -----------------
 drivers/char/Makefile          |    1 
 drivers/ide/Kconfig            |   20 ---------------
 drivers/ide/Makefile           |    1 
 drivers/input/keyboard/Kconfig |   12 ---------
 drivers/input/misc/Kconfig     |    4 ---
 drivers/input/mouse/Kconfig    |   11 --------
 drivers/input/mouse/Makefile   |    1 
 drivers/input/serio/Kconfig    |   10 -------
 drivers/net/Kconfig            |   52 -----------------------------------------
 drivers/net/Makefile           |    1 
 drivers/scsi/Kconfig           |   12 ---------
 drivers/scsi/Makefile          |    2 -
 drivers/serial/Kconfig         |   13 ----------
 drivers/serial/Makefile        |    1 
 fs/partitions/Kconfig          |    7 -----
 fs/partitions/check.c          |    1 
 sound/isa/Kconfig              |   10 -------
 sound/isa/cs423x/Makefile      |    2 -
 20 files changed, 4 insertions(+), 188 deletions(-)


diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/block/Kconfig linux-266-bk1-pc98rm/drivers/block/Kconfig
--- linux-266-bk1/drivers/block/Kconfig	2004-05-09 19:32:26.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/block/Kconfig	2004-05-15 22:31:07.000000000 -0700
@@ -6,7 +6,7 @@ menu "Block devices"
 
 config BLK_DEV_FD
 	tristate "Normal floppy disk support"
-	depends on (!X86_PC9800 && !ARCH_S390 && !M68K && !IA64) || Q40 || (SUN3X && BROKEN)
+	depends on (!ARCH_S390 && !M68K && !IA64) || Q40 || (SUN3X && BROKEN)
 	---help---
 	  If you want to use the floppy disk drive(s) of your PC under Linux,
 	  say Y. Information about this driver, especially important for IBM
@@ -26,13 +26,6 @@ config ATARI_FLOPPY
 	tristate "Atari floppy support"
 	depends on ATARI
 
-config BLK_DEV_FD98
-	tristate "NEC PC-9800 floppy disk support"
-	depends on X86_PC9800
-	---help---
-	  If you want to use the floppy disk drive(s) of NEC PC-9801/PC-9821,
-	  say Y.
-
 config BLK_DEV_SWIM_IOP
 	bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)"
 	depends on MAC && EXPERIMENTAL && BROKEN
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/char/Kconfig linux-266-bk1-pc98rm/drivers/char/Kconfig
--- linux-266-bk1/drivers/char/Kconfig	2004-05-14 16:43:36.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/char/Kconfig	2004-05-15 22:35:29.000000000 -0700
@@ -586,17 +586,6 @@ config HVC_CONSOLE
 	  console. This driver allows each pSeries partition to have a console
 	  which is accessed via the HMC.
 
-config PC9800_OLDLP
-	tristate "NEC PC-9800 old-style printer port support"
-	depends on X86_PC9800 && !PARPORT
-	---help---
-	  If you intend to attach a printer to the parallel port of NEC PC-9801
-	  /PC-9821 with OLD compatibility mode, Say Y.
-
-config PC9800_OLDLP_CONSOLE
-	bool "Support for console on line printer"
-	depends on PC9800_OLDLP
-
 config QIC02_TAPE
 	tristate "QIC-02 tape support"
 	help
@@ -740,7 +729,7 @@ config NVRAM
 
 config RTC
 	tristate "Enhanced Real Time Clock Support"
-	depends on !PPC32 && !PARISC && !IA64 && !X86_PC9800 && !M68K
+	depends on !PPC32 && !PARISC && !IA64 && !M68K
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -793,15 +782,6 @@ config EFI_RTC
 	bool "EFI Real Time Clock Services"
 	depends on IA64
 
-config RTC98
-	tristate "NEC PC-9800 Real Time Clock Support"
-	depends on X86_PC9800
-	default y
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-
 config H8
 	bool "Tadpole ANA H8 Support (OBSOLETE)"
 	depends on OBSOLETE && ALPHA_BOOK1
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/char/Makefile linux-266-bk1-pc98rm/drivers/char/Makefile
--- linux-266-bk1/drivers/char/Makefile	2004-05-14 16:43:36.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/char/Makefile	2004-05-15 22:34:57.000000000 -0700
@@ -48,7 +48,6 @@ obj-$(CONFIG_VIOTAPE)		+= viotape.o
 
 obj-$(CONFIG_PRINTER) += lp.o
 obj-$(CONFIG_TIPAR) += tipar.o
-obj-$(CONFIG_PC9800_OLDLP) += lp_old98.o
 
 obj-$(CONFIG_DTLK) += dtlk.o
 obj-$(CONFIG_R3964) += n_r3964.o
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/ide/Kconfig linux-266-bk1-pc98rm/drivers/ide/Kconfig
--- linux-266-bk1/drivers/ide/Kconfig	2004-05-09 19:32:29.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/ide/Kconfig	2004-05-15 22:38:09.000000000 -0700
@@ -97,25 +97,7 @@ comment "Please see Documentation/ide.tx
 
 config BLK_DEV_HD_IDE
 	bool "Use old disk-only driver on primary interface"
-	depends on ((X86 && X86_PC9800!=y) || SH_MPC1211)
-	---help---
-	  There are two drivers for MFM/RLL/IDE disks.  Most people use just
-	  the new enhanced driver by itself.  This option however installs the
-	  old hard disk driver to control the primary IDE/disk interface in
-	  the system, leaving the new enhanced IDE driver to take care of only
-	  the 2nd/3rd/4th IDE interfaces.  Doing this will prevent you from
-	  having an IDE/ATAPI CD-ROM or tape drive connected to the primary
-	  IDE interface.  Choosing this option may be useful for older systems
-	  which have MFM/RLL/ESDI controller+drives at the primary port
-	  address (0x1f0), along with IDE drives at the secondary/3rd/4th port
-	  addresses.
-
-	  Normally, just say N here; you will then use the new driver for all
-	  4 interfaces.
-
-config BLK_DEV_HD_IDE98
-	bool "Use old disk-only driver on primary interface"
-	depends on X86 && X86_PC9800
+	depends on (X86 || SH_MPC1211)
 	---help---
 	  There are two drivers for MFM/RLL/IDE disks.  Most people use just
 	  the new enhanced driver by itself.  This option however installs the
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/ide/Makefile linux-266-bk1-pc98rm/drivers/ide/Makefile
--- linux-266-bk1/drivers/ide/Makefile	2004-05-09 19:32:37.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/ide/Makefile	2004-05-15 22:38:47.000000000 -0700
@@ -26,7 +26,6 @@ ide-core-$(CONFIG_PROC_FS)		+= ide-proc.
 ide-core-$(CONFIG_BLK_DEV_IDEPNP)	+= ide-pnp.o
 
 # built-in only drivers from legacy/
-ide-core-$(CONFIG_BLK_DEV_IDE_PC9800)	+= legacy/pc9800.o
 ide-core-$(CONFIG_BLK_DEV_BUDDHA)	+= legacy/buddha.o
 ide-core-$(CONFIG_BLK_DEV_FALCON_IDE)	+= legacy/falconide.o
 ide-core-$(CONFIG_BLK_DEV_GAYLE)	+= legacy/gayle.o
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/input/keyboard/Kconfig linux-266-bk1-pc98rm/drivers/input/keyboard/Kconfig
--- linux-266-bk1/drivers/input/keyboard/Kconfig	2004-05-09 19:33:20.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/input/keyboard/Kconfig	2004-05-15 22:24:25.000000000 -0700
@@ -96,15 +96,3 @@ config KEYBOARD_AMIGA
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called amikbd.
-
-config KEYBOARD_98KBD
-	tristate "NEC PC-9800 Keyboard support"
-	depends on X86_PC9800 && INPUT && INPUT_KEYBOARD
-	select SERIO
-	help
-	  Say Y here if you want to use the NEC PC-9801/PC-9821 keyboard (or
-	  compatible) on your system. 
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called 98kbd.
-
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/input/misc/Kconfig linux-266-bk1-pc98rm/drivers/input/misc/Kconfig
--- linux-266-bk1/drivers/input/misc/Kconfig	2004-05-14 16:43:36.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/input/misc/Kconfig	2004-05-15 22:25:04.000000000 -0700
@@ -40,10 +40,6 @@ config INPUT_M68K_BEEP
 	tristate "M68k Beeper support"
 	depends on M68K && INPUT && INPUT_MISC
 
-config INPUT_98SPKR
-	tristate "PC-9800 Speaker support"
-	depends on X86_PC9800 && INPUT && INPUT_MISC
-
 config INPUT_UINPUT
 	tristate "User level driver support"
 	depends on INPUT && INPUT_MISC
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/input/mouse/Kconfig linux-266-bk1-pc98rm/drivers/input/mouse/Kconfig
--- linux-266-bk1/drivers/input/mouse/Kconfig	2004-05-09 19:33:13.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/input/mouse/Kconfig	2004-05-15 22:25:29.000000000 -0700
@@ -130,14 +130,3 @@ config MOUSE_VSXXXAA
 	  described in the source file). This driver should, in theory,
 	  also work with the digitizer DEC produced, but it isn't tested
 	  with that (I don't have the hardware yet).
-
-config MOUSE_PC9800
-	tristate "NEC PC-9800 busmouse"
-	depends on X86_PC9800 && INPUT && INPUT_MOUSE && ISA
-	help
-	  Say Y here if you have NEC PC-9801/PC-9821 computer and want its
-	  native mouse supported.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called 98busmouse.
-
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/input/mouse/Makefile linux-266-bk1-pc98rm/drivers/input/mouse/Makefile
--- linux-266-bk1/drivers/input/mouse/Makefile	2004-05-09 19:32:21.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/input/mouse/Makefile	2004-05-15 22:23:57.000000000 -0700
@@ -10,7 +10,6 @@ obj-$(CONFIG_MOUSE_INPORT)	+= inport.o
 obj-$(CONFIG_MOUSE_LOGIBM)	+= logibm.o
 obj-$(CONFIG_MOUSE_MAPLE)	+= maplemouse.o
 obj-$(CONFIG_MOUSE_PC110PAD)	+= pc110pad.o
-obj-$(CONFIG_MOUSE_PC9800)	+= 98busmouse.o
 obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
 obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
 obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/input/serio/Kconfig linux-266-bk1-pc98rm/drivers/input/serio/Kconfig
--- linux-266-bk1/drivers/input/serio/Kconfig	2004-05-09 19:32:37.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/input/serio/Kconfig	2004-05-15 22:24:43.000000000 -0700
@@ -97,16 +97,6 @@ config SERIO_SA1111
 	tristate "Intel SA1111 keyboard controller"
 	depends on SA1111 && SERIO
 
-config SERIO_98KBD
-	tristate "NEC PC-9800 keyboard controller"
-	depends on X86_PC9800 && SERIO
-	help
-	  Say Y here if you have the NEC PC-9801/PC-9821 and want to use its
-	  standard keyboard connected to its keyboard controller.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called 98kbd-io.
-
 config SERIO_GSCPS2
 	tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
 	depends on GSC && SERIO
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/net/Kconfig linux-266-bk1-pc98rm/drivers/net/Kconfig
--- linux-266-bk1/drivers/net/Kconfig	2004-05-09 19:33:13.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/net/Kconfig	2004-05-15 22:27:19.000000000 -0700
@@ -922,7 +922,7 @@ config HP100
 
 config NET_ISA
 	bool "Other ISA cards"
-	depends on NET_ETHERNET && ISA && !X86_PC9800
+	depends on NET_ETHERNET && ISA
 	---help---
 	  If your network (Ethernet) card hasn't been mentioned yet and its
 	  bus system (that's the way the cards talks to the other components
@@ -1105,56 +1105,6 @@ config SK_G16
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-config NET_CBUS
-	bool "NEC PC-9800 C-bus cards"
-	depends on NET_ETHERNET && ISA && X86_PC9800
-	---help---
-	  If your network (Ethernet) card hasn't been mentioned yet and its
-	  bus system (that's the way the cards talks to the other components
-	  of your computer) is NEC PC-9800 C-Bus, say Y.
-
-config NE2K_CBUS
-	tristate "Most NE2000-based Ethernet support"
-	depends on NET_CBUS
-	select CRC32
-
-config NE2K_CBUS_EGY98
-	bool "Melco EGY-98 support"
-	depends on NE2K_CBUS
-
-config NE2K_CBUS_LGY98
-	bool "Melco LGY-98 support"
-	depends on NE2K_CBUS
-
-config NE2K_CBUS_ICM
-	bool "ICM IF-27xxET support"
-	depends on NE2K_CBUS
-
-config NE2K_CBUS_IOLA98
-	bool "I-O DATA LA-98 support"
-	depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL
-	bool "Contec C-NET(98)E/L support"
-	depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL_IO_BASE
-	hex "C-NET(98)E/L I/O base address (0xaaed or 0x55ed)"
-	depends on NE2K_CBUS_CNET98EL
-	default "0xaaed"
-
-config NE2K_CBUS_ATLA98
-	bool "Allied Telesis LA-98 Support"
-	depends on NE2K_CBUS
-
-config NE2K_CBUS_BDN
-	bool "ELECOM Laneed LD-BDN[123]A Support"
-	depends on NE2K_CBUS
-
-config NE2K_CBUS_NEC108
-	bool "NEC PC-9801-108 Support"
-	depends on NE2K_CBUS
-
 config SKMC
 	tristate "SKnet MCA support"
 	depends on NET_ETHERNET && MCA && BROKEN
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/net/Makefile linux-266-bk1-pc98rm/drivers/net/Makefile
--- linux-266-bk1/drivers/net/Makefile	2004-05-09 19:32:26.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/net/Makefile	2004-05-15 22:27:48.000000000 -0700
@@ -81,7 +81,6 @@ obj-$(CONFIG_ARM_ETHERH) += 8390.o
 obj-$(CONFIG_WD80x3) += wd.o 8390.o
 obj-$(CONFIG_EL2) += 3c503.o 8390.o
 obj-$(CONFIG_NE2000) += ne.o 8390.o
-obj-$(CONFIG_NE2K_CBUS) += ne2k_cbus.o 8390.o
 obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
 obj-$(CONFIG_HPLAN) += hp.o 8390.o
 obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/scsi/Kconfig linux-266-bk1-pc98rm/drivers/scsi/Kconfig
--- linux-266-bk1/drivers/scsi/Kconfig	2004-05-14 16:43:36.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/scsi/Kconfig	2004-05-15 22:33:12.000000000 -0700
@@ -1721,18 +1721,6 @@ config SCSI_SUNESP
 	  To compile this driver as a module, choose M here: the
 	  module will be called esp.
 
-config SCSI_PC980155
-	tristate "NEC PC-9801-55 SCSI support"
-	depends on X86_PC9800 && SCSI
-	help
-	  If you have the NEC PC-9801-55 SCSI interface card or compatibles
-	  for NEC PC-9801/PC-9821, say Y.
-
-config WD33C93_PIO
-	bool
-	depends on SCSI_PC980155
-	default y
-
 #      bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
 
 config ZFCP
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/scsi/Makefile linux-266-bk1-pc98rm/drivers/scsi/Makefile
--- linux-266-bk1/drivers/scsi/Makefile	2004-05-14 16:43:36.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/scsi/Makefile	2004-05-15 22:32:45.000000000 -0700
@@ -34,7 +34,6 @@ obj-$(CONFIG_SCSI_AMIGA7XX)	+= amiga7xx.
 obj-$(CONFIG_A3000_SCSI)	+= a3000.o	wd33c93.o
 obj-$(CONFIG_A2091_SCSI)	+= a2091.o	wd33c93.o
 obj-$(CONFIG_GVP11_SCSI)	+= gvp11.o	wd33c93.o
-obj-$(CONFIG_SCSI_PC980155)	+= pc980155.o	wd33c93.o
 obj-$(CONFIG_MVME147_SCSI)	+= mvme147.o	wd33c93.o
 obj-$(CONFIG_SGIWD93_SCSI)	+= sgiwd93.o	wd33c93.o
 obj-$(CONFIG_CYBERSTORM_SCSI)	+= NCR53C9x.o	cyberstorm.o
@@ -142,7 +141,6 @@ scsi_mod-y			+= scsi.o hosts.o scsi_ioct
 				   scsi_devinfo.o
 scsi_mod-$(CONFIG_SYSCTL)	+= scsi_sysctl.o
 scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
-scsi_mod-$(CONFIG_X86_PC9800)	+= scsi_pc98.o
 
 sd_mod-objs	:= sd.o
 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/serial/Kconfig linux-266-bk1-pc98rm/drivers/serial/Kconfig
--- linux-266-bk1/drivers/serial/Kconfig	2004-05-09 19:33:19.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/serial/Kconfig	2004-05-15 22:29:29.000000000 -0700
@@ -517,19 +517,6 @@ config V850E_UART_CONSOLE
 	depends on V850E_UART
 	select SERIAL_CORE_CONSOLE
 
-config SERIAL98
-	tristate "PC-9800 8251-based primary serial port support"
-	depends on X86_PC9800
-	select SERIAL_CORE
-	help
-	  If you want to use standard primary serial ports on PC-9800, 
-	  say Y.  Otherwise, say N.
-
-config SERIAL98_CONSOLE
-        bool "Support for console on PC-9800 standard serial port"
-        depends on SERIAL98=y
-	select SERIAL_CORE_CONSOLE
-
 config SERIAL_SH_SCI
 	tristate "SH SCI(F) serial port support"
 	depends on SUPERH || H8300
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/drivers/serial/Makefile linux-266-bk1-pc98rm/drivers/serial/Makefile
--- linux-266-bk1/drivers/serial/Makefile	2004-05-09 19:32:36.000000000 -0700
+++ linux-266-bk1-pc98rm/drivers/serial/Makefile	2004-05-15 22:29:34.000000000 -0700
@@ -33,7 +33,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328seria
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_V850E_UART) += v850e_uart.o
-obj-$(CONFIG_SERIAL98) += serial98.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/fs/partitions/check.c linux-266-bk1-pc98rm/fs/partitions/check.c
--- linux-266-bk1/fs/partitions/check.c	2004-05-09 19:33:19.000000000 -0700
+++ linux-266-bk1-pc98rm/fs/partitions/check.c	2004-05-15 22:12:23.000000000 -0700
@@ -29,7 +29,6 @@
 #include "ldm.h"
 #include "mac.h"
 #include "msdos.h"
-#include "nec98.h"
 #include "osf.h"
 #include "sgi.h"
 #include "sun.h"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/fs/partitions/Kconfig linux-266-bk1-pc98rm/fs/partitions/Kconfig
--- linux-266-bk1/fs/partitions/Kconfig	2004-05-09 19:33:19.000000000 -0700
+++ linux-266-bk1-pc98rm/fs/partitions/Kconfig	2004-05-15 22:08:07.000000000 -0700
@@ -187,13 +187,6 @@ config LDM_DEBUG
 
 	  If unsure, say N.
 
-config NEC98_PARTITION
-	bool "NEC PC-9800 partition table support" if PARTITION_ADVANCED
-	default y if !PARTITION_ADVANCED && X86_PC9800
-	help
-	  Say Y here if you would like to be able to read the hard disk
-	  partition table format used by NEC PC-9800 machines.
-
 config SGI_PARTITION
 	bool "SGI partition support" if PARTITION_ADVANCED
 	default y if !PARTITION_ADVANCED && (SGI_IP22 || SGI_IP27)
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/sound/isa/cs423x/Makefile linux-266-bk1-pc98rm/sound/isa/cs423x/Makefile
--- linux-266-bk1/sound/isa/cs423x/Makefile	2004-05-09 19:33:13.000000000 -0700
+++ linux-266-bk1-pc98rm/sound/isa/cs423x/Makefile	2004-05-15 22:02:39.000000000 -0700
@@ -8,7 +8,6 @@ snd-cs4236-lib-objs := cs4236_lib.o
 snd-cs4231-objs := cs4231.o
 snd-cs4232-objs := cs4232.o
 snd-cs4236-objs := cs4236.o
-snd-pc98-cs4232-objs := pc98.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_AZT2320) += snd-cs4231-lib.o
@@ -22,6 +21,5 @@ obj-$(CONFIG_SND_INTERWAVE_STB) += snd-c
 obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-cs4231-lib.o
 obj-$(CONFIG_SND_WAVEFRONT) += snd-cs4231-lib.o
 obj-$(CONFIG_SND_SSCAPE) += snd-cs4231-lib.o
-obj-$(CONFIG_SND_PC98_CS4232) += snd-pc98-cs4232.o snd-cs4231-lib.o
 
 obj-m := $(sort $(obj-m))
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-bk1/sound/isa/Kconfig linux-266-bk1-pc98rm/sound/isa/Kconfig
--- linux-266-bk1/sound/isa/Kconfig	2004-05-09 19:33:13.000000000 -0700
+++ linux-266-bk1-pc98rm/sound/isa/Kconfig	2004-05-15 22:03:20.000000000 -0700
@@ -51,16 +51,6 @@ config SND_CS4236
 	  Say 'Y' or 'M' to include support for CS4235,CS4236,CS4237B,CS4238B,CS4239
 	  chips from Cirrus Logic - Crystal Semiconductors.
 
-config SND_PC98_CS4232
-	tristate "NEC PC9800 CS4232 driver"
-	depends on SND && X86_PC9800
-	select SND_OPL3_LIB
-	select SND_MPU401_UART
-	select SND_PCM
-	help
-	  Say 'Y' or 'M' to include support for NEC PC-9801/PC-9821 on-board
-	  soundchip based on CS4232.
-
 config SND_ES968
 	tristate "Generic ESS ES968 driver"
 	depends on SND && ISAPNP

^ permalink raw reply	[flat|nested] 21+ messages in thread

end of thread, other threads:[~2004-05-18 21:14 UTC | newest]

Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-05-16  7:35 [patch] kill off PC9800 Norman Diamond
2004-05-16 16:36 ` Adrian Bunk
2004-05-17 21:38   ` Norman Diamond
2004-05-17 21:51     ` Roland Dreier
2004-05-17 21:59       ` Norman Diamond
2004-05-17 22:33         ` Bartlomiej Zolnierkiewicz
2004-05-18  1:04         ` viro
2004-05-17 22:17       ` Joel Jaeggli
  -- strict thread matches above, loose matches on Subject: below --
2004-05-16 17:50 James Bottomley
2004-05-16 21:21 ` Andrew Morton
2004-05-16 21:28   ` Jeff Garzik
2004-05-16 21:38     ` James Bottomley
2004-05-17 17:15       ` Jeff Garzik
2004-05-18 20:14   ` Matt Mackall
2004-05-18 20:23     ` Brian Gerst
2004-05-18 20:53       ` Matt Mackall
2004-05-18 21:14         ` James Bottomley
2004-05-16  6:21 Randy.Dunlap
2004-05-16  6:28 ` Andrew Morton
2004-05-16 16:16   ` GOTO Masanori
2004-05-16 17:25     ` Randy.Dunlap

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).