LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com>,
	<wg@grandegger.com>, <michal.simek@xilinx.com>,
	<grant.likely@linaro.org>, <robh+dt@kernel.org>,
	<linux-can@vger.kernel.org>, <netdev@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Kedareswara rao Appana <appanad@xilinx.com>
Subject: Re: [PATCH v5] can: Convert to runtime_pm
Date: Tue, 13 Jan 2015 10:43:54 -0800	[thread overview]
Message-ID: <07e66b114b764211b8f04b4c53462181@BY2FFO11FD046.protection.gbl> (raw)
In-Reply-To: <54B55DF4.2090505@pengutronix.de>

On Tue, 2015-01-13 at 07:03PM +0100, Marc Kleine-Budde wrote:
> On 01/13/2015 06:49 PM, Sören Brinkmann wrote:
> > On Tue, 2015-01-13 at 06:44PM +0100, Marc Kleine-Budde wrote:
> >> On 01/13/2015 06:24 PM, Sören Brinkmann wrote:
> >>> On Tue, 2015-01-13 at 06:17PM +0100, Marc Kleine-Budde wrote:
> >>>> On 01/13/2015 06:08 PM, Sören Brinkmann wrote:
> >>>>> On Tue, 2015-01-13 at 12:08PM +0100, Marc Kleine-Budde wrote:
> >>>>>> On 01/12/2015 07:45 PM, Sören Brinkmann wrote:
> >>>>>>> On Mon, 2015-01-12 at 08:34PM +0530, Kedareswara rao Appana wrote:
> >>>>>>>> Instead of enabling/disabling clocks at several locations in the driver,
> >>>>>>>> Use the runtime_pm framework. This consolidates the actions for runtime PM
> >>>>>>>> In the appropriate callbacks and makes the driver more readable and mantainable.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >>>>>>>> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> >>>>>>>> ---
> >>>>>>>> Changes for v5:
> >>>>>>>>  - Updated with the review comments.
> >>>>>>>>    Updated the remove fuction to use runtime_pm.
> >>>>>>>> Chnages for v4:
> >>>>>>>>  - Updated with the review comments.
> >>>>>>>> Changes for v3:
> >>>>>>>>   - Converted the driver to use runtime_pm.
> >>>>>>>> Changes for v2:
> >>>>>>>>   - Removed the struct platform_device* from suspend/resume
> >>>>>>>>     as suggest by Lothar.
> >>>>>>>>
> >>>>>>>>  drivers/net/can/xilinx_can.c |  157 ++++++++++++++++++++++++++++-------------
> >>>>>>>>  1 files changed, 107 insertions(+), 50 deletions(-)
> >>>>>>> [..]
> >>>>>>>> +static int __maybe_unused xcan_runtime_resume(struct device *dev)
> >>>>>>>>  {
> >>>>>>>> -	struct platform_device *pdev = dev_get_drvdata(dev);
> >>>>>>>> -	struct net_device *ndev = platform_get_drvdata(pdev);
> >>>>>>>> +	struct net_device *ndev = dev_get_drvdata(dev);
> >>>>>>>>  	struct xcan_priv *priv = netdev_priv(ndev);
> >>>>>>>>  	int ret;
> >>>>>>>> +	u32 isr, status;
> >>>>>>>>  
> >>>>>>>>  	ret = clk_enable(priv->bus_clk);
> >>>>>>>>  	if (ret) {
> >>>>>>>> @@ -1014,15 +1030,28 @@ static int __maybe_unused xcan_resume(struct device *dev)
> >>>>>>>>  	ret = clk_enable(priv->can_clk);
> >>>>>>>>  	if (ret) {
> >>>>>>>>  		dev_err(dev, "Cannot enable clock.\n");
> >>>>>>>> -		clk_disable_unprepare(priv->bus_clk);
> >>>>>>>> +		clk_disable(priv->bus_clk);
> >>>>>>> [...]
> >>>>>>>> @@ -1173,12 +1219,23 @@ static int xcan_remove(struct platform_device *pdev)
> >>>>>>>>  {
> >>>>>>>>  	struct net_device *ndev = platform_get_drvdata(pdev);
> >>>>>>>>  	struct xcan_priv *priv = netdev_priv(ndev);
> >>>>>>>> +	int ret;
> >>>>>>>> +
> >>>>>>>> +	ret = pm_runtime_get_sync(&pdev->dev);
> >>>>>>>> +	if (ret < 0) {
> >>>>>>>> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> >>>>>>>> +				__func__, ret);
> >>>>>>>> +		return ret;
> >>>>>>>> +	}
> >>>>>>>>  
> >>>>>>>>  	if (set_reset_mode(ndev) < 0)
> >>>>>>>>  		netdev_err(ndev, "mode resetting failed!\n");
> >>>>>>>>  
> >>>>>>>>  	unregister_candev(ndev);
> >>>>>>>> +	pm_runtime_disable(&pdev->dev);
> >>>>>>>>  	netif_napi_del(&priv->napi);
> >>>>>>>> +	clk_disable_unprepare(priv->bus_clk);
> >>>>>>>> +	clk_disable_unprepare(priv->can_clk);
> >>>>>>>
> >>>>>>> Shouldn't pretty much all these occurrences of clk_disable/enable
> >>>>>>> disappear? This should all be handled by the runtime_pm framework now.
> >>>>>>
> >>>>>> We have:
> >>>>>> - clk_prepare_enable() in probe
> >>>>>
> >>>>> This should become something like pm_runtime_get_sync(), shouldn't it?
> >>>>>
> >>>>>> - clk_disable_unprepare() in remove
> >>>>>
> >>>>> pm_runtime_put()
> >>>>>
> >>>>>> - clk_enable() in runtime_resume
> >>>>>> - clk_disable() in runtime_suspend
> >>>>>
> >>>>> These are the ones needed.
> >>>>>
> >>>>> The above makes me suspect that the clocks are always on, regardless of
> >>>>
> >>>> Define "on" :)
> >>>> The clocks are prepared after probe() exists, but not enabled. The first
> >>>> pm_runtime_get_sync() will enable the clocks.
> >>>>
> >>>>> the runtime suspend state since they are enabled in probe and disabled
> >>>>> in remove, is that right? Ideally, the usage in probe and remove should
> >>>>> be migrated to runtime_pm and clocks should really only be running when
> >>>>> needed and not throughout the whole lifetime of the driver.
> >>>>
> >>>> The clocks are not en/disabled via pm_runtime, because
> >>>> pm_runtime_get_sync() is called from atomic contect. We can have another
> >>>> look into the driver and try to change this.
> >>
> >>> Wasn't that why the call to pm_runtime_irq_safe() was added?
> >>
> >> Good question. That should be investigated.
> >>
> >>> Also, clk_enable/disable should be okay to be run from atomic context.
> >>> And if the clock are already prepared after the exit of probe that
> >>> should be enough. Then remove() should just have to do the unprepare.
> >>> But I don't see why runtime_pm shouldn't be able to do the
> >>> enable/disable.
> >>
> >> runtime_pm does call the clk_{enable,disable} function. But you mean
> >> clk_prepare() + pm_runtime_get_sync() should be used in probe() instead
> >> of calling clk_prepare_enable(). Good idea! I think the
> >> "pm_runtime_set_active(&pdev->dev);" has to be removed from the patch.
> > 
> > Right, that's what I was thinking. The proposed changes make sense, IMHO.
> > 
> >>
> >> Coming back whether blocking calls are allowed or not.
> >> If you make a call to pm_runtime_irq_safe(), you state that it's okay to
> >> call pm_runtime_get_sync() from atomic context. But it's only called in
> >> open, probe, remove and in xcan_get_berr_counter, which is not called
> >> from atomic either. So let's try to remove the pm_runtime_irq_safe() and
> >> use clk_prepare_enable() clk_disable_unprepare() in the runtime_resume()
> >> runtime_suspend() functions.
> > 
> > IIRC, xcan_get_berr_counter() is called from atomic context. I think
> > that was how this got started.
> 
> In some drivers the get_berr_counter() function is used in the irq
> handler, but here it's only called from outside, an thus from non atomic
> context.
> 
> From an older mail of yours:
> 
> > I have the feeling I'm missing something. If I remove the 'must not
> > sleep' requirement from the runtime suspend/resume functions, I get
> > this:
> > 
> > BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:954
> 
> http://lxr.free-electrons.com/source/drivers/base/power/runtime.c#L954
> 
> I think it's failing because of the pm_runtime_irq_safe() call.

Adding that call fixed this issue.

	Sören

  reply	other threads:[~2015-01-13 18:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-12 15:04 Kedareswara rao Appana
2015-01-12 18:45 ` Sören Brinkmann
2015-01-13 11:08   ` Marc Kleine-Budde
2015-01-13 17:08     ` Sören Brinkmann
2015-01-13 17:17       ` Marc Kleine-Budde
2015-01-13 17:24         ` Sören Brinkmann
2015-01-13 17:44           ` Marc Kleine-Budde
2015-01-13 17:49             ` Sören Brinkmann
2015-01-13 18:03               ` Marc Kleine-Budde
2015-01-13 18:43                 ` Sören Brinkmann [this message]
2015-01-12 19:52 ` Marc Kleine-Budde
2015-01-28 14:46 ` Marc Kleine-Budde
2015-01-28 15:19   ` Appana Durga Kedareswara Rao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=07e66b114b764211b8f04b4c53462181@BY2FFO11FD046.protection.gbl \
    --to=soren.brinkmann@xilinx.com \
    --cc=appana.durga.rao@xilinx.com \
    --cc=appanad@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=grant.likely@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wg@grandegger.com \
    --subject='Re: [PATCH v5] can: Convert to runtime_pm' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).