LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Baolin Wang <baolin.wang@linaro.org>,
	pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com
Cc: xiaotong.lu@spreadtrum.com, broonie@kernel.org,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
Date: Tue, 8 May 2018 22:54:10 +0200	[thread overview]
Message-ID: <085f9ca1-13de-36d6-18eb-ac0e560ba237@gmail.com> (raw)
In-Reply-To: <9a2a07b8eb313ae3ba64af911337ee7ff7c9ad43.1525757122.git.baolin.wang@linaro.org>

Hi Baolin,

Thank you for the updated version.

I have few notes below, please take a look.

On 05/08/2018 07:39 AM, Baolin Wang wrote:
> From: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
> 
> This patch adds Spreadtrum SC27xx PMIC series breathing light controller
> driver, which can support 3 LEDs. Each LED can work at normal PWM mode
> and breathing mode.
> 
> Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> Changes since v1:
>   - Add ABI documentation.
>   - Add mutex protection in case of concurrent access.
>   - Change the LED device name pattern.
>   - Fix build warning.
> ---
>   .../ABI/testing/sysfs-class-led-driver-sc27xx      |   19 +
>   drivers/leds/Kconfig                               |   11 +
>   drivers/leds/Makefile                              |    1 +
>   drivers/leds/leds-sc27xx-bltc.c                    |  387 ++++++++++++++++++++
>   4 files changed, 418 insertions(+)
>   create mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>   create mode 100644 drivers/leds/leds-sc27xx-bltc.c
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
> new file mode 100644
> index 0000000..22166fb
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
> @@ -0,0 +1,19 @@
> +What:		/sys/class/leds/<led>/rise_time
> +What:		/sys/class/leds/<led>/high_time
> +What:		/sys/class/leds/<led>/fall_time
> +What:		/sys/class/leds/<led>/low_time
> +Date:		May 2018
> +KernelVersion:	4.18
> +Contact:	Xiaotong Lu <xiaotong.lu@spreadtrum.com>
> +Description:
> +		Set the pattern generator rise, high, fall and low
> +		times (0..63). It's unit is 0.125s, it should be > 0.
> +
> +		1 - 125 ms
> +		2 - 250 ms
> +		3 - 375 ms
> +		...
> +		...
> +		...
> +		62 - 7.75 s
> +		63 - 7.875 s

It would be good to describe here how altering these settings
interacts with brightness changes. E.g., AFAICS from the code
the pattern is turned off when setting brightness to 0, and
turned on when writing any of these files.

I'm also not sure if making these files RO is a good idea.
How about making them RW? Any brightness change would
reset those values to 0 and turn off pattern generator.

Otherwise it would be not possible to check whether pattern
generator is enabled or not.

> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 2c896c0..319449b 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -647,6 +647,17 @@ config LEDS_IS31FL32XX
>   	  LED controllers. They are I2C devices with multiple constant-current
>   	  channels, each with independent 256-level PWM control.
>   
> +config LEDS_SC27XX_BLTC
> +	tristate "LED support for the SC27xx breathing light controller"
> +	depends on LEDS_CLASS && MFD_SC27XX_PMIC
> +	depends on OF
> +	help
> +	  Say Y here to include support for the SC27xx breathing light controller
> +	  LEDs.
> +
> +	  This driver can also be built as a module. If so the module will be
> +	  called leds-sc27xx-bltc.
> +
>   comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
>   
>   config LEDS_BLINKM
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 91eca81..ff6917e 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)		+= leds-mlxreg.o
>   obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
>   obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
>   obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
> +obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
>   
>   # LED SPI Drivers
>   obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-sc27xx-bltc.c b/drivers/leds/leds-sc27xx-bltc.c
> new file mode 100644
> index 0000000..61c5b72
> --- /dev/null
> +++ b/drivers/leds/leds-sc27xx-bltc.c
> @@ -0,0 +1,387 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018 Spreadtrum Communications Inc.
> +
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <uapi/linux/uleds.h>
> +
> +/* PMIC global control register definition */
> +#define SC27XX_MODULE_EN0	0xc08
> +#define SC27XX_CLK_EN0		0xc18
> +#define SC27XX_RGB_CTRL		0xebc
> +
> +#define SC27XX_BLTC_EN		BIT(9)
> +#define SC27XX_RTC_EN		BIT(7)
> +#define SC27XX_RGB_PD		BIT(0)
> +
> +/* Breathing light controller register definition */
> +#define SC27XX_LEDS_CTRL	0x00
> +#define SC27XX_LEDS_PRESCALE	0x04
> +#define SC27XX_LEDS_DUTY	0x08
> +#define SC27XX_LEDS_CURVE0	0x0c
> +#define SC27XX_LEDS_CURVE1	0x10
> +
> +#define SC27XX_CTRL_SHIFT	4
> +#define SC27XX_LED_RUN		BIT(0)
> +#define SC27XX_LED_TYPE		BIT(1)
> +
> +#define SC27XX_DUTY_SHIFT	8
> +#define SC27XX_DUTY_MASK	GENMASK(15, 0)
> +#define SC27XX_MOD_MASK		GENMASK(7, 0)
> +
> +#define SC27XX_CURVE_SHIFT	8
> +#define SC27XX_CURVE_L_MASK	GENMASK(7, 0)
> +#define SC27XX_CURVE_H_MASK	GENMASK(15, 8)
> +
> +#define SC27XX_LEDS_OFFSET	0x10
> +#define SC27XX_LEDS_MAX		3
> +#define SC27XX_LEDS_TIME_MAX	63
> +
> +/*
> + * The SC27xx breathing light controller can support 3 outputs: red LED,
> + * green LED and blue LED. Each LED can support normal PWM mode and breathing
> + * mode.
> + *
> + * In breathing mode, the LED output curve includes rise, high, fall and low 4
> + * stages, and the duration of each stage is configurable.
> + */
> +enum sc27xx_led_config {
> +	SC27XX_RISE_TIME,
> +	SC27XX_FALL_TIME,
> +	SC27XX_HIGH_TIME,
> +	SC27XX_LOW_TIME,
> +};
> +
> +struct sc27xx_led {
> +	char name[LED_MAX_NAME_SIZE];
> +	struct led_classdev ldev;
> +	struct sc27xx_led_priv *priv;
> +	enum led_brightness value;

This property is redundant - you have brightness in the
struct led_classdev.

> +	u8 line;
> +	bool breath_mode;
> +	bool active;
> +};
> +
> +struct sc27xx_led_priv {
> +	struct sc27xx_led leds[SC27XX_LEDS_MAX];
> +	struct regmap *regmap;
> +	struct mutex lock;
> +	u32 base;
> +};
> +
> +#define to_sc27xx_led(ldev) \
> +	container_of(ldev, struct sc27xx_led, ldev)
> +
> +static int sc27xx_led_init(struct regmap *regmap)
> +{
> +	int err;
> +
> +	err = regmap_update_bits(regmap, SC27XX_MODULE_EN0, SC27XX_BLTC_EN,
> +				 SC27XX_BLTC_EN);
> +	if (err)
> +		return err;
> +
> +	err = regmap_update_bits(regmap, SC27XX_CLK_EN0, SC27XX_RTC_EN,
> +				 SC27XX_RTC_EN);
> +	if (err)
> +		return err;
> +
> +	return regmap_update_bits(regmap, SC27XX_RGB_CTRL, SC27XX_RGB_PD, 0);
> +}
> +
> +static u32 sc27xx_led_get_offset(struct sc27xx_led *leds)
> +{
> +	return leds->priv->base + SC27XX_LEDS_OFFSET * leds->line;
> +}
> +
> +static int sc27xx_led_enable(struct sc27xx_led *leds)
> +{
> +	u32 base = sc27xx_led_get_offset(leds);
> +	u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
> +	u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
> +	struct regmap *regmap = leds->priv->regmap;
> +	int err;
> +
> +	err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY,
> +				 SC27XX_DUTY_MASK,
> +				 (leds->value  << SC27XX_DUTY_SHIFT) |
> +				 SC27XX_MOD_MASK);
> +	if (err)
> +		return err;
> +
> +	if (leds->breath_mode)
> +		return regmap_update_bits(regmap, ctrl_base,
> +					  SC27XX_LED_RUN << ctrl_shift,
> +					  SC27XX_LED_RUN << ctrl_shift);
> +
> +	return regmap_update_bits(regmap, ctrl_base,
> +			(SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift,
> +			(SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift);
> +}
> +
> +static int sc27xx_led_disable(struct sc27xx_led *leds)
> +{
> +	u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
> +
> +	leds->breath_mode = false;
> +
> +	return regmap_update_bits(leds->priv->regmap,
> +			leds->priv->base + SC27XX_LEDS_CTRL,
> +			(SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, 0);
> +}
> +
> +static int sc27xx_led_set(struct led_classdev *ldev, enum led_brightness value)
> +{
> +	struct sc27xx_led *leds = to_sc27xx_led(ldev);
> +	int err;
> +
> +	mutex_lock(&leds->priv->lock);

Empty line here please.

> +	leds->value = value;

It should not be needed at all.

> +	if (value == LED_OFF)
> +		err = sc27xx_led_disable(leds);
> +	else
> +		err = sc27xx_led_enable(leds);

Empty line here please.

> +	mutex_unlock(&leds->priv->lock);
> +
> +	return err;
> +}
> +
> +static int sc27xx_led_config(struct sc27xx_led *leds,
> +			     enum sc27xx_led_config config, u32 val)
> +{
> +	u32 base = sc27xx_led_get_offset(leds);
> +	struct regmap *regmap = leds->priv->regmap;
> +	int err;
> +
> +	mutex_lock(&leds->priv->lock);

Empty line here please.

> +	switch (config) {
> +	case SC27XX_RISE_TIME:
> +		err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
> +					 SC27XX_CURVE_L_MASK, val);
> +		break;
> +	case SC27XX_FALL_TIME:
> +		err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
> +					 SC27XX_CURVE_H_MASK,
> +					 val << SC27XX_CURVE_SHIFT);
> +		break;
> +	case SC27XX_HIGH_TIME:
> +		err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
> +					 SC27XX_CURVE_L_MASK, val);
> +		break;
> +	case SC27XX_LOW_TIME:
> +		err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
> +					 SC27XX_CURVE_H_MASK,
> +					 val << SC27XX_CURVE_SHIFT);
> +		break;
> +	default:
> +		err = -ENOTSUPP;
> +		break;
> +	}
> +
> +	if (!err && !leds->breath_mode)
> +		leds->breath_mode = true;
> +
> +	mutex_unlock(&leds->priv->lock);
> +
> +	return err;
> +}
> +
> +static ssize_t rise_time_store(struct device *dev,
> +			       struct device_attribute *attr,
> +			       const char *buf, size_t size)
> +{
> +	struct led_classdev *ldev = dev_get_drvdata(dev);
> +	struct sc27xx_led *leds = to_sc27xx_led(ldev);
> +	u32 val;
> +	int err;
> +
> +	if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
> +		return -EINVAL;
> +
> +	err = sc27xx_led_config(leds, SC27XX_RISE_TIME, val);
> +	if (err)
> +		return err;
> +
> +	return size;
> +}
> +
> +static ssize_t fall_time_store(struct device *dev,
> +			       struct device_attribute *attr,
> +			       const char *buf, size_t size)
> +{
> +	struct led_classdev *ldev = dev_get_drvdata(dev);
> +	struct sc27xx_led *leds = to_sc27xx_led(ldev);
> +	u32 val;
> +	int err;
> +
> +	if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
> +		return -EINVAL;
> +
> +	err = sc27xx_led_config(leds, SC27XX_FALL_TIME, val);
> +	if (err)
> +		return err;
> +
> +	return size;
> +}
> +
> +static ssize_t high_time_store(struct device *dev,
> +			       struct device_attribute *attr,
> +			       const char *buf, size_t size)
> +{
> +	struct led_classdev *ldev = dev_get_drvdata(dev);
> +	struct sc27xx_led *leds = to_sc27xx_led(ldev);
> +	u32 val;
> +	int err;
> +
> +	if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
> +		return -EINVAL;
> +
> +	err = sc27xx_led_config(leds, SC27XX_HIGH_TIME, val);
> +	if (err)
> +		return err;
> +
> +	return size;
> +}
> +
> +static ssize_t low_time_store(struct device *dev,
> +			      struct device_attribute *attr,
> +			      const char *buf, size_t size)
> +{
> +	struct led_classdev *ldev = dev_get_drvdata(dev);
> +	struct sc27xx_led *leds = to_sc27xx_led(ldev);
> +	u32 val;
> +	int err;
> +
> +	if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
> +		return -EINVAL;
> +
> +	err = sc27xx_led_config(leds, SC27XX_LOW_TIME, val);
> +	if (err)
> +		return err;
> +
> +	return size;
> +}
> +
> +static DEVICE_ATTR_WO(rise_time);
> +static DEVICE_ATTR_WO(fall_time);
> +static DEVICE_ATTR_WO(high_time);
> +static DEVICE_ATTR_WO(low_time);
> +
> +static struct attribute *sc27xx_led_attrs[] = {
> +	&dev_attr_rise_time.attr,
> +	&dev_attr_fall_time.attr,
> +	&dev_attr_high_time.attr,
> +	&dev_attr_low_time.attr,
> +	NULL,
> +};
> +ATTRIBUTE_GROUPS(sc27xx_led);
> +
> +static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv)
> +{
> +	int i, err;
> +
> +	err = sc27xx_led_init(priv->regmap);
> +	if (err)
> +		return err;
> +
> +	for (i = 0; i < SC27XX_LEDS_MAX; i++) {
> +		struct sc27xx_led *led = &priv->leds[i];
> +
> +		if (!led->active)
> +			continue;
> +
> +		led->line = i;
> +		led->priv = priv;
> +		led->ldev.name = led->name;
> +		led->ldev.brightness_set_blocking = sc27xx_led_set;
> +		led->ldev.max_brightness = LED_FULL;

LED core will set max_brightness to LED_FULL if initialized to 0,
so we can skip this line.

> +		led->ldev.groups = sc27xx_led_groups;
> +
> +		err = devm_led_classdev_register(dev, &led->ldev);
> +		if (err)
> +			return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static int sc27xx_led_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node, *child;
> +	struct sc27xx_led_priv *priv;
> +	const char *str;
> +	u32 base, count, reg;
> +	int err;
> +
> +	count = of_get_child_count(np);
> +	if (!count || count > SC27XX_LEDS_MAX)
> +		return -EINVAL;
> +
> +	err = of_property_read_u32(np, "reg", &base);
> +	if (err) {
> +		dev_err(dev, "fail to get reg of property\n");
> +		return err;
> +	}
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	mutex_init(&priv->lock);
> +	priv->base = base;
> +	priv->regmap = dev_get_regmap(dev->parent, NULL);
> +	if (IS_ERR(priv->regmap)) {
> +		err = PTR_ERR(priv->regmap);
> +		dev_err(dev, "failed to get regmap: %d\n", err);
> +		return err;
> +	}
> +
> +	for_each_child_of_node(np, child) {
> +		err = of_property_read_u32(child, "reg", &reg);
> +		if (err) {
> +			of_node_put(child);

Now we need also mutex_destroy() in the error path, so please add 
relevant label and go there from here.

> +			return err;
> +		}
> +
> +		if (reg >= SC27XX_LEDS_MAX || priv->leds[reg].active) {
> +			of_node_put(child);
> +			return -EINVAL;

Ditto.

> +		}
> +
> +		priv->leds[reg].active = true;
> +
> +		err = of_property_read_string(child, "label", &str);
> +		if (err)
> +			snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
> +				 "sc27xx::");
> +		else
> +			snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
> +				 "sc27xx:%s", str);
> +	}
> +
> +	return sc27xx_led_register(dev, priv);
> +}
> +
> +static const struct of_device_id sc27xx_led_of_match[] = {
> +	{ .compatible = "sprd,sc2731-bltc", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sc27xx_led_of_match);
> +
> +static struct platform_driver sc27xx_led_driver = {
> +	.driver = {
> +		.name = "sprd-bltc",
> +		.of_match_table = sc27xx_led_of_match,
> +	},
> +	.probe = sc27xx_led_probe,

"remove" op will be needed as well for mutex_destroy().

> +};
> +
> +module_platform_driver(sc27xx_led_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum SC27xx breathing light controller driver");
> +MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>");
> +MODULE_LICENSE("GPL v2");
> 

-- 
Best regards,
Jacek Anaszewski

  reply	other threads:[~2018-05-08 20:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-08  5:39 [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation Baolin Wang
2018-05-08  5:39 ` [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver Baolin Wang
2018-05-08 20:54   ` Jacek Anaszewski [this message]
2018-05-09  2:34     ` Baolin Wang
2018-05-09 14:25   ` Pavel Machek
2018-05-09 19:40     ` Jacek Anaszewski
2018-05-10 11:37       ` Pavel Machek
2018-05-10 19:41         ` Jacek Anaszewski
2018-05-12  8:35           ` Pavel Machek
2018-05-12 20:44             ` Jacek Anaszewski
2018-05-13  2:19               ` Baolin Wang
2018-06-21  7:25               ` Baolin Wang
2018-05-10  3:12     ` Baolin Wang
2018-05-08 15:43 ` [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation Rob Herring
2018-05-09 14:25 ` Pavel Machek
2018-05-09 20:09   ` Jacek Anaszewski
2018-05-10  1:55   ` Baolin Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=085f9ca1-13de-36d6-18eb-ac0e560ba237@gmail.com \
    --to=jacek.anaszewski@gmail.com \
    --cc=baolin.wang@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=xiaotong.lu@spreadtrum.com \
    --subject='Re: [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).