LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support
@ 2021-11-16  6:22 Vinod Koul
  2021-11-16  6:22 ` [PATCH v3 01/13] drm/msm/dsi: add support for dsc data Vinod Koul
                   ` (12 more replies)
  0 siblings, 13 replies; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

Display Stream Compression (DSC) compresses the display stream in host which
is later decoded by panel. This series enables this for Qualcomm msm driver.
This was tested on Google Pixel3 phone which use LGE SW43408 panel.
 
The changes include DSC data and hardware block enabling for DPU1 then
support in encoder. We also add support in DSI and introduce required
topology changes.
 
In order for panel to set the DSC parameters we add dsc in drm_panel and set
it from the msm driver.

We still have dsc as a globabl entity. I think while doing DP + DSC we
should be able to update it, right now comprehending the requirements are
bit difficult.
 
Complete changes which enable this for Pixel3 along with panel driver (not
part of this series) and DT changes can be found at:
git.linaro.org/people/vinod.koul/kernel.git pixel/dsc_v3
 
Comments welcome!

Changes since v2:
 - Fix comments by Dimitry except the dsc being global.
 - Move RM patch later for dependency on topology now
 - Add patch for mode valid callback for dsi_mgr
 - Add missing structure documentation patch
 - Fix errors in mode_3d changes
 - Rebase on v5.16-rc1 and test

Changes since v1:
 - Fix various issues spotted by kbuildbot
 - Rebase to v5.15-rc3
 - Remove unused fields and duplicate defines
 - Enable DSC blocks only when DSC is enabled
 - remove sdm845 feature mask, use 0
 - Check for DSC in hw_ctl

Changes since RFC:
 - Drop the DT binding patch as we derive the configuration from panel
 - Drop the drm api patch as we no longer need it (use pps drm api)
 - Fix comments raised by Dimitry
 - Add dsc parameters calculation from downstream

Vinod Koul (13):
  drm/msm/dsi: add support for dsc data
  drm/msm/disp/dpu1: Add support for DSC
  drm/msm/disp/dpu1: Add support for DSC in pingpong block
  drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog
  drm/msm/disp/dpu1: Don't use DSC with mode_3d
  drm/msm/disp/dpu1: Add DSC support in hw_ctl
  drm/msm/disp/dpu1: Add support for DSC in encoder
  drm/msm: Add missing structure documentation
  drm/msm/disp/dpu1: Add support for DSC in topology
  drm/msm/disp/dpu1: Add DSC support in RM
  drm/msm/dsi: add mode valid callback for dsi_mgr
  drm/msm/dsi: Add support for DSC configuration
  drm/msm/dsi: Pass DSC params to drm_panel

 drivers/gpu/drm/msm/Makefile                  |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c   | 158 +++++++++-
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h  |  11 +
 .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  |   2 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |  20 ++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  13 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c    |  14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h    |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c    | 210 +++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h    |  77 +++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |  13 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   |  32 ++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   |  14 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c        |  66 ++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h        |   1 +
 drivers/gpu/drm/msm/dsi/dsi.h                 |   2 +
 drivers/gpu/drm/msm/dsi/dsi.xml.h             |  10 +
 drivers/gpu/drm/msm/dsi/dsi_host.c            | 285 +++++++++++++++++-
 drivers/gpu/drm/msm/dsi/dsi_manager.c         |  12 +
 drivers/gpu/drm/msm/msm_drv.h                 |  23 ++
 include/drm/drm_panel.h                       |   7 +
 22 files changed, 970 insertions(+), 4 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h

-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 01/13] drm/msm/dsi: add support for dsc data
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 15:53   ` Dmitry Baryshkov
  2021-11-30  1:14   ` [Freedreno] " Abhinav Kumar
  2021-11-16  6:22 ` [PATCH v3 02/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
                   ` (11 subsequent siblings)
  12 siblings, 2 replies; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

Display Stream Compression (DSC) parameters need to be calculated. Add
helpers and struct msm_display_dsc_config in msm_drv for this
msm_display_dsc_config uses drm_dsc_config for DSC parameters.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 132 +++++++++++++++++++++++++++++
 drivers/gpu/drm/msm/msm_drv.h      |  20 +++++
 2 files changed, 152 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index f69a125f9559..30c1e299aa52 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -31,6 +31,8 @@
 
 #define DSI_RESET_TOGGLE_DELAY_MS 20
 
+static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc);
+
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 {
 	u32 ver;
@@ -157,6 +159,7 @@ struct msm_dsi_host {
 	struct regmap *sfpb;
 
 	struct drm_display_mode *mode;
+	struct msm_display_dsc_config *dsc;
 
 	/* connected device info */
 	struct device_node *device_node;
@@ -1710,6 +1713,135 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host,
 	return -EINVAL;
 }
 
+static u32 dsi_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
+	0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62,
+	0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
+};
+
+/* only 8bpc, 8bpp added */
+static char min_qp[DSC_NUM_BUF_RANGES] = {
+	0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13
+};
+
+static char max_qp[DSC_NUM_BUF_RANGES] = {
+	4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15
+};
+
+static char bpg_offset[DSC_NUM_BUF_RANGES] = {
+	2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12
+};
+
+static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc)
+{
+	int mux_words_size;
+	int groups_per_line, groups_total;
+	int min_rate_buffer_size;
+	int hrd_delay;
+	int pre_num_extra_mux_bits, num_extra_mux_bits;
+	int slice_bits;
+	int target_bpp_x16;
+	int data;
+	int final_value, final_scale;
+	int i;
+
+	dsc->drm->rc_model_size = 8192;
+	dsc->drm->first_line_bpg_offset = 12;
+	dsc->drm->rc_edge_factor = 6;
+	dsc->drm->rc_tgt_offset_high = 3;
+	dsc->drm->rc_tgt_offset_low = 3;
+	dsc->drm->simple_422 = 0;
+	dsc->drm->convert_rgb = 1;
+	dsc->drm->vbr_enable = 0;
+
+	/* handle only bpp = bpc = 8 */
+	for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++)
+		dsc->drm->rc_buf_thresh[i] = dsi_dsc_rc_buf_thresh[i];
+
+	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+		dsc->drm->rc_range_params[i].range_min_qp = min_qp[i];
+		dsc->drm->rc_range_params[i].range_max_qp = max_qp[i];
+		dsc->drm->rc_range_params[i].range_bpg_offset = bpg_offset[i];
+	}
+
+	dsc->drm->initial_offset = 6144; /* Not bpp 12 */
+	if (dsc->drm->bits_per_pixel != 8)
+		dsc->drm->initial_offset = 2048;	/* bpp = 12 */
+
+	mux_words_size = 48;		/* bpc == 8/10 */
+	if (dsc->drm->bits_per_component == 12)
+		mux_words_size = 64;
+
+	dsc->drm->initial_xmit_delay = 512;
+	dsc->drm->initial_scale_value = 32;
+	dsc->drm->first_line_bpg_offset = 12;
+	dsc->drm->line_buf_depth = dsc->drm->bits_per_component + 1;
+
+	/* bpc 8 */
+	dsc->drm->flatness_min_qp = 3;
+	dsc->drm->flatness_max_qp = 12;
+	dsc->det_thresh_flatness = 7 + 2 * (dsc->drm->bits_per_component - 8);
+	dsc->drm->rc_quant_incr_limit0 = 11;
+	dsc->drm->rc_quant_incr_limit1 = 11;
+	dsc->drm->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
+
+	/* FIXME: need to call drm_dsc_compute_rc_parameters() so that rest of
+	 * params are calculated
+	 */
+	dsc->slice_last_group_size = 3 - (dsc->drm->slice_width % 3);
+	groups_per_line = DIV_ROUND_UP(dsc->drm->slice_width, 3);
+	dsc->drm->slice_chunk_size = dsc->drm->slice_width * dsc->drm->bits_per_pixel / 8;
+	if ((dsc->drm->slice_width * dsc->drm->bits_per_pixel) % 8)
+		dsc->drm->slice_chunk_size++;
+
+	/* rbs-min */
+	min_rate_buffer_size =  dsc->drm->rc_model_size - dsc->drm->initial_offset +
+				dsc->drm->initial_xmit_delay * dsc->drm->bits_per_pixel +
+				groups_per_line * dsc->drm->first_line_bpg_offset;
+
+	hrd_delay = DIV_ROUND_UP(min_rate_buffer_size, dsc->drm->bits_per_pixel);
+
+	dsc->drm->initial_dec_delay = hrd_delay - dsc->drm->initial_xmit_delay;
+
+	dsc->drm->initial_scale_value = 8 * dsc->drm->rc_model_size /
+				       (dsc->drm->rc_model_size - dsc->drm->initial_offset);
+
+	slice_bits = 8 * dsc->drm->slice_chunk_size * dsc->drm->slice_height;
+
+	groups_total = groups_per_line * dsc->drm->slice_height;
+
+	data = dsc->drm->first_line_bpg_offset * 2048;
+
+	dsc->drm->nfl_bpg_offset = DIV_ROUND_UP(data, (dsc->drm->slice_height - 1));
+
+	pre_num_extra_mux_bits = 3 * (mux_words_size + (4 * dsc->drm->bits_per_component + 4) - 2);
+
+	num_extra_mux_bits = pre_num_extra_mux_bits - (mux_words_size -
+			     ((slice_bits - pre_num_extra_mux_bits) % mux_words_size));
+
+	data = 2048 * (dsc->drm->rc_model_size - dsc->drm->initial_offset + num_extra_mux_bits);
+	dsc->drm->slice_bpg_offset = DIV_ROUND_UP(data, groups_total);
+
+	/* bpp * 16 + 0.5 */
+	data = dsc->drm->bits_per_pixel * 16;
+	data *= 2;
+	data++;
+	data /= 2;
+	target_bpp_x16 = data;
+
+	data = (dsc->drm->initial_xmit_delay * target_bpp_x16) / 16;
+	final_value =  dsc->drm->rc_model_size - data + num_extra_mux_bits;
+	dsc->drm->final_offset = final_value;
+
+	final_scale = 8 * dsc->drm->rc_model_size / (dsc->drm->rc_model_size - final_value);
+
+	data = (final_scale - 9) * (dsc->drm->nfl_bpg_offset + dsc->drm->slice_bpg_offset);
+	dsc->drm->scale_increment_interval = (2048 * dsc->drm->final_offset) / data;
+
+	dsc->drm->scale_decrement_interval = groups_per_line / (dsc->drm->initial_scale_value - 8);
+
+	return 0;
+}
+
 static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 69952b239384..de7cb65bfc52 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -30,6 +30,7 @@
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_dsc.h>
 #include <drm/msm_drm.h>
 #include <drm/drm_gem.h>
 
@@ -134,6 +135,22 @@ struct msm_drm_thread {
 	struct kthread_worker *worker;
 };
 
+/* DSC config */
+struct msm_display_dsc_config {
+	struct drm_dsc_config *drm;
+
+	u32 initial_lines;
+	u32 pkt_per_line;
+	u32 bytes_in_slice;
+	u32 bytes_per_pkt;
+	u32 eol_byte_num;
+	u32 pclk_per_line;
+	u32 slice_last_group_size;
+	u32 det_thresh_flatness;
+
+	unsigned int dsc_mask;
+};
+
 struct msm_drm_private {
 
 	struct drm_device *dev;
@@ -228,6 +245,9 @@ struct msm_drm_private {
 	/* Properties */
 	struct drm_property *plane_property[PLANE_PROP_MAX_NUM];
 
+	/* DSC configuration */
+	struct msm_display_dsc_config *dsc;
+
 	/* VRAM carveout, used when no IOMMU: */
 	struct {
 		unsigned long size;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 02/13] drm/msm/disp/dpu1: Add support for DSC
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
  2021-11-16  6:22 ` [PATCH v3 01/13] drm/msm/dsi: add support for dsc data Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 15:35   ` Dmitry Baryshkov
  2021-11-16  6:22 ` [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
                   ` (10 subsequent siblings)
  12 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

Display Stream Compression (DSC) is one of the hw blocks in dpu, so add
support by adding hw blocks for DSC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/Makefile                  |   1 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  13 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c    | 210 ++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h    |  77 +++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |  13 ++
 5 files changed, 314 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 40577f8856d8..7d7058f1f5c1 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -59,6 +59,7 @@ msm-y := \
 	disp/dpu1/dpu_formats.o \
 	disp/dpu1/dpu_hw_catalog.o \
 	disp/dpu1/dpu_hw_ctl.o \
+	disp/dpu1/dpu_hw_dsc.o \
 	disp/dpu1/dpu_hw_interrupts.o \
 	disp/dpu1/dpu_hw_intf.o \
 	disp/dpu1/dpu_hw_lm.o \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 4ade44bbd37e..65f43fadcda0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -553,6 +553,16 @@ struct dpu_merge_3d_cfg  {
 	const struct dpu_merge_3d_sub_blks *sblk;
 };
 
+/**
+ * struct dpu_dsc_cfg - information of DSC blocks
+ * @id                 enum identifying this block
+ * @base               register offset of this block
+ * @features           bit mask identifying sub-blocks/features
+ */
+struct dpu_dsc_cfg {
+	DPU_HW_BLK_INFO;
+};
+
 /**
  * struct dpu_intf_cfg - information of timing engine blocks
  * @id                 enum identifying this block
@@ -749,6 +759,9 @@ struct dpu_mdss_cfg {
 	u32 merge_3d_count;
 	const struct dpu_merge_3d_cfg *merge_3d;
 
+	u32 dsc_count;
+	struct dpu_dsc_cfg *dsc;
+
 	u32 intf_count;
 	const struct dpu_intf_cfg *intf;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
new file mode 100644
index 000000000000..449d6f1dad28
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020-2021, Linaro Limited
+ */
+
+#include "dpu_kms.h"
+#include "dpu_hw_catalog.h"
+#include "dpu_hwio.h"
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_dsc.h"
+
+#define DSC_COMMON_MODE	                0x000
+#define DSC_ENC                         0X004
+#define DSC_PICTURE                     0x008
+#define DSC_SLICE                       0x00C
+#define DSC_CHUNK_SIZE                  0x010
+#define DSC_DELAY                       0x014
+#define DSC_SCALE_INITIAL               0x018
+#define DSC_SCALE_DEC_INTERVAL          0x01C
+#define DSC_SCALE_INC_INTERVAL          0x020
+#define DSC_FIRST_LINE_BPG_OFFSET       0x024
+#define DSC_BPG_OFFSET                  0x028
+#define DSC_DSC_OFFSET                  0x02C
+#define DSC_FLATNESS                    0x030
+#define DSC_RC_MODEL_SIZE               0x034
+#define DSC_RC                          0x038
+#define DSC_RC_BUF_THRESH               0x03C
+#define DSC_RANGE_MIN_QP                0x074
+#define DSC_RANGE_MAX_QP                0x0B0
+#define DSC_RANGE_BPG_OFFSET            0x0EC
+
+static void dpu_hw_dsc_disable(struct dpu_hw_dsc *dsc)
+{
+	struct dpu_hw_blk_reg_map *c = &dsc->hw;
+
+	DPU_REG_WRITE(c, DSC_COMMON_MODE, 0);
+}
+
+static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
+			      struct msm_display_dsc_config *dsc, u32 mode)
+{
+	struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
+	u32 data, lsb, bpp;
+	u32 initial_lines = dsc->initial_lines;
+	bool is_cmd_mode = !(mode & DSC_MODE_VIDEO);
+
+	DPU_REG_WRITE(c, DSC_COMMON_MODE, mode);
+
+	if (is_cmd_mode)
+		initial_lines += 1;
+
+	data = (initial_lines << 20);
+	data |= ((dsc->slice_last_group_size - 1) << 18);
+	/* bpp is 6.4 format, 4 LSBs bits are for fractional part */
+	data |= dsc->drm->bits_per_pixel << 12;
+	lsb = dsc->drm->bits_per_pixel % 4;
+	bpp = dsc->drm->bits_per_pixel / 4;
+	bpp *= 4;
+	bpp <<= 4;
+	bpp |= lsb;
+
+	data |= bpp << 8;
+	data |= (dsc->drm->block_pred_enable << 7);
+	data |= (dsc->drm->line_buf_depth << 3);
+	data |= (dsc->drm->simple_422 << 2);
+	data |= (dsc->drm->convert_rgb << 1);
+	data |= dsc->drm->bits_per_component;
+
+	DPU_REG_WRITE(c, DSC_ENC, data);
+
+	data = dsc->drm->pic_width << 16;
+	data |= dsc->drm->pic_height;
+	DPU_REG_WRITE(c, DSC_PICTURE, data);
+
+	data = dsc->drm->slice_width << 16;
+	data |= dsc->drm->slice_height;
+	DPU_REG_WRITE(c, DSC_SLICE, data);
+
+	data = dsc->drm->slice_chunk_size << 16;
+	DPU_REG_WRITE(c, DSC_CHUNK_SIZE, data);
+
+	data = dsc->drm->initial_dec_delay << 16;
+	data |= dsc->drm->initial_xmit_delay;
+	DPU_REG_WRITE(c, DSC_DELAY, data);
+
+	data = dsc->drm->initial_scale_value;
+	DPU_REG_WRITE(c, DSC_SCALE_INITIAL, data);
+
+	data = dsc->drm->scale_decrement_interval;
+	DPU_REG_WRITE(c, DSC_SCALE_DEC_INTERVAL, data);
+
+	data = dsc->drm->scale_increment_interval;
+	DPU_REG_WRITE(c, DSC_SCALE_INC_INTERVAL, data);
+
+	data = dsc->drm->first_line_bpg_offset;
+	DPU_REG_WRITE(c, DSC_FIRST_LINE_BPG_OFFSET, data);
+
+	data = dsc->drm->nfl_bpg_offset << 16;
+	data |= dsc->drm->slice_bpg_offset;
+	DPU_REG_WRITE(c, DSC_BPG_OFFSET, data);
+
+	data = dsc->drm->initial_offset << 16;
+	data |= dsc->drm->final_offset;
+	DPU_REG_WRITE(c, DSC_DSC_OFFSET, data);
+
+	data = dsc->det_thresh_flatness << 10;
+	data |= dsc->drm->flatness_max_qp << 5;
+	data |= dsc->drm->flatness_min_qp;
+	DPU_REG_WRITE(c, DSC_FLATNESS, data);
+
+	data = dsc->drm->rc_model_size;
+	DPU_REG_WRITE(c, DSC_RC_MODEL_SIZE, data);
+
+	data = dsc->drm->rc_tgt_offset_low << 18;
+	data |= dsc->drm->rc_tgt_offset_high << 14;
+	data |= dsc->drm->rc_quant_incr_limit1 << 9;
+	data |= dsc->drm->rc_quant_incr_limit0 << 4;
+	data |= dsc->drm->rc_edge_factor;
+	DPU_REG_WRITE(c, DSC_RC, data);
+}
+
+static void dpu_hw_dsc_config_thresh(struct dpu_hw_dsc *hw_dsc,
+				     struct msm_display_dsc_config *dsc)
+{
+	struct drm_dsc_rc_range_parameters *rc = dsc->drm->rc_range_params;
+	struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
+	u32 off;
+	int i;
+
+	off = DSC_RC_BUF_THRESH;
+	for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++) {
+		DPU_REG_WRITE(c, off, dsc->drm->rc_buf_thresh[i]);
+		off += 4;
+	}
+
+	off = DSC_RANGE_MIN_QP;
+	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+		DPU_REG_WRITE(c, off, rc[i].range_min_qp);
+		off += 4;
+	}
+
+	off = DSC_RANGE_MAX_QP;
+	for (i = 0; i < 15; i++) {
+		DPU_REG_WRITE(c, off, rc[i].range_max_qp);
+		off += 4;
+	}
+
+	off = DSC_RANGE_BPG_OFFSET;
+	for (i = 0; i < 15; i++) {
+		DPU_REG_WRITE(c, off, rc[i].range_bpg_offset);
+		off += 4;
+	}
+}
+
+static struct dpu_dsc_cfg *_dsc_offset(enum dpu_dsc dsc,
+				       struct dpu_mdss_cfg *m,
+				       void __iomem *addr,
+				       struct dpu_hw_blk_reg_map *b)
+{
+	int i;
+
+	for (i = 0; i < m->dsc_count; i++) {
+		if (dsc == m->dsc[i].id) {
+			b->base_off = addr;
+			b->blk_off = m->dsc[i].base;
+			b->length = m->dsc[i].len;
+			b->hwversion = m->hwversion;
+			b->log_mask = DPU_DBG_MASK_DSC;
+			return &m->dsc[i];
+		}
+	}
+
+	return NULL;
+}
+
+static void _setup_dsc_ops(struct dpu_hw_dsc_ops *ops,
+			   unsigned long cap)
+{
+	ops->dsc_disable = dpu_hw_dsc_disable;
+	ops->dsc_config = dpu_hw_dsc_config;
+	ops->dsc_config_thresh = dpu_hw_dsc_config_thresh;
+};
+
+struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void __iomem *addr,
+				   struct dpu_mdss_cfg *m)
+{
+	struct dpu_hw_dsc *c;
+	struct dpu_dsc_cfg *cfg;
+
+	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return ERR_PTR(-ENOMEM);
+
+	cfg = _dsc_offset(idx, m, addr, &c->hw);
+	if (IS_ERR_OR_NULL(cfg)) {
+		kfree(c);
+		return ERR_PTR(-EINVAL);
+	}
+
+	c->idx = idx;
+	c->caps = cfg;
+	_setup_dsc_ops(&c->ops, c->caps->features);
+
+	return c;
+}
+
+void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc)
+{
+	kfree(dsc);
+}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
new file mode 100644
index 000000000000..648c9e4d8749
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2020-2021, Linaro Limited */
+
+#ifndef _DPU_HW_DSC_H
+#define _DPU_HW_DSC_H
+
+#include <drm/drm_dsc.h>
+
+#define DSC_MODE_SPLIT_PANEL            BIT(0)
+#define DSC_MODE_MULTIPLEX              BIT(1)
+#define DSC_MODE_VIDEO                  BIT(2)
+
+struct dpu_hw_dsc;
+
+/**
+ * struct dpu_hw_dsc_ops - interface to the dsc hardware driver functions
+ * Assumption is these functions will be called after clocks are enabled
+ */
+struct dpu_hw_dsc_ops {
+	/**
+	 * dsc_disable - disable dsc
+	 * @hw_dsc: Pointer to dsc context
+	 */
+	void (*dsc_disable)(struct dpu_hw_dsc *hw_dsc);
+
+	/**
+	 * dsc_config - configures dsc encoder
+	 * @hw_dsc: Pointer to dsc context
+	 * @dsc: panel dsc parameters
+	 * @mode: dsc topology mode to be set
+	 */
+	void (*dsc_config)(struct dpu_hw_dsc *hw_dsc,
+			   struct msm_display_dsc_config *dsc, u32 mode);
+
+	/**
+	 * dsc_config_thresh - programs panel thresholds
+	 * @hw_dsc: Pointer to dsc context
+	 * @dsc: panel dsc parameters
+	 */
+	void (*dsc_config_thresh)(struct dpu_hw_dsc *hw_dsc,
+				  struct msm_display_dsc_config *dsc);
+};
+
+struct dpu_hw_dsc {
+	struct dpu_hw_blk base;
+	struct dpu_hw_blk_reg_map hw;
+
+	/* dsc */
+	enum dpu_dsc idx;
+	const struct dpu_dsc_cfg *caps;
+
+	/* ops */
+	struct dpu_hw_dsc_ops ops;
+};
+
+/**
+ * dpu_hw_dsc_init - initializes the dsc block for the passed dsc idx.
+ * @idx:  DSC index for which driver object is required
+ * @addr: Mapped register io address of MDP
+ * @m:    Pointer to mdss catalog data
+ * Returns: Error code or allocated dpu_hw_dsc context
+ */
+struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void __iomem *addr,
+				   struct dpu_mdss_cfg *m);
+
+/**
+ * dpu_hw_dsc_destroy - destroys dsc driver context
+ * @dsc:   Pointer to dsc driver context returned by dpu_hw_dsc_init
+ */
+void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc);
+
+static inline struct dpu_hw_dsc *to_dpu_hw_dsc(struct dpu_hw_blk *hw)
+{
+	return container_of(hw, struct dpu_hw_dsc, base);
+}
+
+#endif /* _DPU_HW_DSC_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index bb9ceadeb0bb..b0ce8cb97d22 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -97,6 +97,7 @@ enum dpu_hw_blk_type {
 	DPU_HW_BLK_WB,
 	DPU_HW_BLK_DSPP,
 	DPU_HW_BLK_MERGE_3D,
+	DPU_HW_BLK_DSC,
 	DPU_HW_BLK_MAX,
 };
 
@@ -176,6 +177,17 @@ enum dpu_ctl {
 	CTL_MAX
 };
 
+enum dpu_dsc {
+	DSC_NONE = 0,
+	DSC_0,
+	DSC_1,
+	DSC_2,
+	DSC_3,
+	DSC_4,
+	DSC_5,
+	DSC_MAX
+};
+
 enum dpu_pingpong {
 	PINGPONG_0 = 1,
 	PINGPONG_1,
@@ -437,5 +449,6 @@ struct dpu_mdss_color {
 #define DPU_DBG_MASK_VBIF     (1 << 8)
 #define DPU_DBG_MASK_ROT      (1 << 9)
 #define DPU_DBG_MASK_DSPP     (1 << 10)
+#define DPU_DBG_MASK_DSC      (1 << 11)
 
 #endif  /* _DPU_HW_MDSS_H */
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
  2021-11-16  6:22 ` [PATCH v3 01/13] drm/msm/dsi: add support for dsc data Vinod Koul
  2021-11-16  6:22 ` [PATCH v3 02/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2022-02-17 21:54   ` Marijn Suijten
  2021-11-16  6:22 ` [PATCH v3 04/13] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
                   ` (9 subsequent siblings)
  12 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

In SDM845, DSC can be enabled by writing to pingpong block registers, so
add support for DSC in hw_pp

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 32 +++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++++++
 2 files changed, 46 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
index 55766c97c4c8..47c6ab6caf95 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
@@ -28,6 +28,9 @@
 #define PP_FBC_MODE                     0x034
 #define PP_FBC_BUDGET_CTL               0x038
 #define PP_FBC_LOSSY_MODE               0x03C
+#define PP_DSC_MODE                     0x0a0
+#define PP_DCE_DATA_IN_SWAP             0x0ac
+#define PP_DCE_DATA_OUT_SWAP            0x0c8
 
 #define PP_DITHER_EN			0x000
 #define PP_DITHER_BITDEPTH		0x004
@@ -245,6 +248,32 @@ static u32 dpu_hw_pp_get_line_count(struct dpu_hw_pingpong *pp)
 	return line;
 }
 
+static int dpu_hw_pp_dsc_enable(struct dpu_hw_pingpong *pp)
+{
+	struct dpu_hw_blk_reg_map *c = &pp->hw;
+
+	DPU_REG_WRITE(c, PP_DSC_MODE, 1);
+	return 0;
+}
+
+static void dpu_hw_pp_dsc_disable(struct dpu_hw_pingpong *pp)
+{
+	struct dpu_hw_blk_reg_map *c = &pp->hw;
+
+	DPU_REG_WRITE(c, PP_DSC_MODE, 0);
+}
+
+static int dpu_hw_pp_setup_dsc(struct dpu_hw_pingpong *pp)
+{
+	struct dpu_hw_blk_reg_map *pp_c = &pp->hw;
+	int data;
+
+	data = DPU_REG_READ(pp_c, PP_DCE_DATA_OUT_SWAP);
+	data |= BIT(18); /* endian flip */
+	DPU_REG_WRITE(pp_c, PP_DCE_DATA_OUT_SWAP, data);
+	return 0;
+}
+
 static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
 				unsigned long features)
 {
@@ -256,6 +285,9 @@ static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
 	c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
 	c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
 	c->ops.get_line_count = dpu_hw_pp_get_line_count;
+	c->ops.setup_dsc = dpu_hw_pp_setup_dsc;
+	c->ops.enable_dsc = dpu_hw_pp_dsc_enable;
+	c->ops.disable_dsc = dpu_hw_pp_dsc_disable;
 
 	if (test_bit(DPU_PINGPONG_DITHER, &features))
 		c->ops.setup_dither = dpu_hw_pp_setup_dither;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
index 89d08a715c16..12758468d9ca 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
@@ -124,6 +124,20 @@ struct dpu_hw_pingpong_ops {
 	 */
 	void (*setup_dither)(struct dpu_hw_pingpong *pp,
 			struct dpu_hw_dither_cfg *cfg);
+	/**
+	 * Enable DSC
+	 */
+	int (*enable_dsc)(struct dpu_hw_pingpong *pp);
+
+	/**
+	 * Disable DSC
+	 */
+	void (*disable_dsc)(struct dpu_hw_pingpong *pp);
+
+	/**
+	 * Setup DSC
+	 */
+	int (*setup_dsc)(struct dpu_hw_pingpong *pp);
 };
 
 struct dpu_hw_merge_3d;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 04/13] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (2 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-16  6:22 ` [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
                   ` (8 subsequent siblings)
  12 siblings, 0 replies; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

This adds SDM845 DSC blocks into hw_catalog

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index ce6f32a919e5..c773bbe57b6b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -821,6 +821,24 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
 	PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
 	PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
 };
+
+/*************************************************************
+ * DSC sub blocks config
+ *************************************************************/
+#define DSC_BLK(_name, _id, _base) \
+	{\
+	.name = _name, .id = _id, \
+	.base = _base, .len = 0x140, \
+	.features = 0, \
+	}
+
+static struct dpu_dsc_cfg sdm845_dsc[] = {
+	DSC_BLK("dsc_0", DSC_0, 0x80000),
+	DSC_BLK("dsc_1", DSC_1, 0x80400),
+	DSC_BLK("dsc_2", DSC_2, 0x80800),
+	DSC_BLK("dsc_3", DSC_3, 0x80c00),
+};
+
 /*************************************************************
  * INTF sub blocks config
  *************************************************************/
@@ -1124,6 +1142,8 @@ static void sdm845_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
 		.mixer = sdm845_lm,
 		.pingpong_count = ARRAY_SIZE(sdm845_pp),
 		.pingpong = sdm845_pp,
+		.dsc_count = ARRAY_SIZE(sdm845_dsc),
+		.dsc = sdm845_dsc,
 		.intf_count = ARRAY_SIZE(sdm845_intf),
 		.intf = sdm845_intf,
 		.vbif_count = ARRAY_SIZE(sdm845_vbif),
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (3 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 04/13] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 15:39   ` Dmitry Baryshkov
                     ` (2 more replies)
  2021-11-16  6:22 ` [PATCH v3 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
                   ` (7 subsequent siblings)
  12 siblings, 3 replies; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

We cannot enable mode_3d when we are using the DSC. So pass
configuration to detect DSC is enabled and not enable mode_3d
when we are using DSC

We add a helper dpu_encoder_helper_get_dsc() to detect dsc
enabled and pass this to .setup_intf_cfg()

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  3 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
 4 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index e7270eb6b84b..efb85d595598 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
 	return BLEND_3D_NONE;
 }
 
+static inline bool dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc)
+{
+	struct drm_encoder *drm_enc = phys_enc->parent;
+	struct msm_drm_private *priv = drm_enc->dev->dev_private;
+
+	if (priv->dsc)
+		return priv->dsc->dsc_mask;
+
+	return 0;
+}
+
 /**
  * dpu_encoder_helper_split_config - split display configuration helper function
  *	This helper function may be used by physical encoders to configure
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 34a6940d12c5..f3f00f4d0193 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
 	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
 	intf_cfg.stream_sel = cmd_enc->stream_sel;
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
+
 	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
 }
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 64740ddb983e..36831457a91b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
 
 	intf_cfg |= (cfg->intf & 0xF) << 4;
 
-	if (cfg->mode_3d) {
+	/* In DSC we can't set merge, so check for dsc too */
+	if (cfg->mode_3d && !cfg->dsc) {
 		intf_cfg |= BIT(19);
 		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
 	}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
index 806c171e5df2..9847c9c46d6f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
  * @merge_3d:              3d merge block used
  * @intf_mode_sel:         Interface mode, cmd / vid
  * @stream_sel:            Stream selection for multi-stream interfaces
+ * @dsc:                   DSC BIT masks
  */
 struct dpu_hw_intf_cfg {
 	enum dpu_intf intf;
@@ -47,6 +48,7 @@ struct dpu_hw_intf_cfg {
 	enum dpu_merge_3d merge_3d;
 	enum dpu_ctl_mode_sel intf_mode_sel;
 	int stream_sel;
+	unsigned int dsc;
 };
 
 /**
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (4 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 15:40   ` Dmitry Baryshkov
  2021-11-16  6:22 ` [PATCH v3 07/13] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
                   ` (6 subsequent siblings)
  12 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

Later gens of hardware have DSC bits moved to hw_ctl, so configure these
bits so that DSC would work there as well

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 36831457a91b..66b0c44118d8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -25,6 +25,8 @@
 #define   CTL_MERGE_3D_ACTIVE           0x0E4
 #define   CTL_INTF_ACTIVE               0x0F4
 #define   CTL_MERGE_3D_FLUSH            0x100
+#define   CTL_DSC_ACTIVE                0x0E8
+#define   CTL_DSC_FLUSH                0x104
 #define   CTL_INTF_FLUSH                0x110
 #define   CTL_INTF_MASTER               0x134
 #define   CTL_FETCH_PIPE_ACTIVE         0x0FC
@@ -34,6 +36,7 @@
 
 #define DPU_REG_RESET_TIMEOUT_US        2000
 #define  MERGE_3D_IDX   23
+#define  DSC_IDX        22
 #define  INTF_IDX       31
 #define CTL_INVALID_BIT                 0xffff
 
@@ -120,7 +123,6 @@ static u32 dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
 
 static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
 {
-
 	if (ctx->pending_flush_mask & BIT(MERGE_3D_IDX))
 		DPU_REG_WRITE(&ctx->hw, CTL_MERGE_3D_FLUSH,
 				ctx->pending_merge_3d_flush_mask);
@@ -498,6 +500,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
 	u32 intf_active = 0;
 	u32 mode_sel = 0;
 
+	if (cfg->dsc)
+		DPU_REG_WRITE(&ctx->hw, CTL_DSC_FLUSH, cfg->dsc);
+
 	if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD)
 		mode_sel |= BIT(17);
 
@@ -509,6 +514,10 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
 	if (cfg->merge_3d)
 		DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
 			      BIT(cfg->merge_3d - MERGE_3D_0));
+	if (cfg->dsc) {
+		DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, cfg->dsc);
+		DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
+	}
 }
 
 static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 07/13] drm/msm/disp/dpu1: Add support for DSC in encoder
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (5 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 15:58   ` Dmitry Baryshkov
  2021-11-16  6:22 ` [PATCH v3 08/13] drm/msm: Add missing structure documentation Vinod Koul
                   ` (5 subsequent siblings)
  12 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

We need to configure the encoder for DSC configuration and calculate DSC
parameters for the given timing so this patch adds that support by
adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 140 +++++++++++++++++++-
 1 file changed, 139 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index e7ee4cfb8461..f2ff8a504918 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -21,6 +21,7 @@
 #include "dpu_hw_intf.h"
 #include "dpu_hw_ctl.h"
 #include "dpu_hw_dspp.h"
+#include "dpu_hw_dsc.h"
 #include "dpu_formats.h"
 #include "dpu_encoder_phys.h"
 #include "dpu_crtc.h"
@@ -136,6 +137,7 @@ enum dpu_enc_rc_states {
  * @cur_slave:		As above but for the slave encoder.
  * @hw_pp:		Handle to the pingpong blocks used for the display. No.
  *			pingpong blocks can be different than num_phys_encs.
+ * @hw_dsc:		Handle to the DSC blocks used for the display.
  * @intfs_swapped:	Whether or not the phys_enc interfaces have been swapped
  *			for partial update right-only cases, such as pingpong
  *			split where virtual pingpong does not generate IRQs
@@ -182,6 +184,7 @@ struct dpu_encoder_virt {
 	struct dpu_encoder_phys *cur_master;
 	struct dpu_encoder_phys *cur_slave;
 	struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
+	struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
 
 	bool intfs_swapped;
 
@@ -972,7 +975,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 	struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
 	struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
 	struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL };
-	int num_lm, num_ctl, num_pp;
+	struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC];
+	int num_lm, num_ctl, num_pp, num_dsc;
 	int i, j;
 
 	if (!drm_enc) {
@@ -1030,6 +1034,14 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 		dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i])
 						: NULL;
 
+	if (priv->dsc) {
+		num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
+							drm_enc->base.id, DPU_HW_BLK_DSC,
+							hw_dsc, ARRAY_SIZE(hw_dsc));
+		for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
+			dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL;
+	}
+
 	cstate = to_dpu_crtc_state(drm_crtc->state);
 
 	for (i = 0; i < num_lm; i++) {
@@ -1772,10 +1784,132 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work)
 			nsecs_to_jiffies(ktime_to_ns(wakeup_time)));
 }
 
+static void
+dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width)
+{
+	int slice_count, slice_per_intf;
+	int bytes_in_slice, total_bytes_per_intf;
+
+	if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) {
+		DPU_ERROR("Invalid DSC/slices\n");
+		return;
+	}
+
+	slice_count = dsc->drm->slice_count;
+	slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width);
+
+	/*
+	 * If slice_count is greater than slice_per_intf then default to 1.
+	 * This can happen during partial update.
+	 */
+	if (slice_count > slice_per_intf)
+		slice_count = 1;
+
+	bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
+				      dsc->drm->bits_per_pixel, 8);
+	total_bytes_per_intf = bytes_in_slice * slice_per_intf;
+
+	dsc->eol_byte_num = total_bytes_per_intf % 3;
+	dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
+	dsc->bytes_in_slice = bytes_in_slice;
+	dsc->bytes_per_pkt = bytes_in_slice * slice_count;
+	dsc->pkt_per_line = slice_per_intf / slice_count;
+}
+
+static void
+dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc,
+				  u32 enc_ip_width)
+{
+	int ssm_delay, total_pixels, soft_slice_per_enc;
+
+	soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width;
+
+	/*
+	 * minimum number of initial line pixels is a sum of:
+	 * 1. sub-stream multiplexer delay (83 groups for 8bpc,
+	 *    91 for 10 bpc) * 3
+	 * 2. for two soft slice cases, add extra sub-stream multiplexer * 3
+	 * 3. the initial xmit delay
+	 * 4. total pipeline delay through the "lock step" of encoder (47)
+	 * 5. 6 additional pixels as the output of the rate buffer is
+	 *    48 bits wide
+	 */
+	ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92);
+	total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47;
+	if (soft_slice_per_enc > 1)
+		total_pixels += (ssm_delay * 3);
+	dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width);
+}
+
+static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
+				     struct dpu_hw_pingpong *hw_pp,
+				     struct msm_display_dsc_config *dsc,
+				     u32 common_mode)
+{
+	if (hw_dsc->ops.dsc_config)
+		hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode);
+
+	if (hw_dsc->ops.dsc_config_thresh)
+		hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc);
+
+	if (hw_pp->ops.setup_dsc)
+		hw_pp->ops.setup_dsc(hw_pp);
+
+	if (hw_pp->ops.enable_dsc)
+		hw_pp->ops.enable_dsc(hw_pp);
+}
+
+static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
+				 struct msm_display_dsc_config *dsc)
+{
+	/* coding only for 2LM, 2enc, 1 dsc config */
+	struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
+	struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
+	struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
+	int this_frame_slices;
+	int intf_ip_w, enc_ip_w;
+	int dsc_common_mode;
+	int pic_width;
+	int i;
+
+	for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
+		hw_pp[i] = dpu_enc->hw_pp[i];
+		hw_dsc[i] = dpu_enc->hw_dsc[i];
+
+		if (!hw_pp[i] || !hw_dsc[i]) {
+			DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n");
+			return;
+		}
+	}
+
+	dsc_common_mode = 0;
+	pic_width = dsc->drm->pic_width;
+
+	dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL;
+	if (enc_master->intf_mode == INTF_MODE_VIDEO)
+		dsc_common_mode |= DSC_MODE_VIDEO;
+
+	this_frame_slices = pic_width / dsc->drm->slice_width;
+	intf_ip_w = this_frame_slices * dsc->drm->slice_width;
+
+	dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w);
+
+	/*
+	 * dsc merge case: when using 2 encoders for the same stream,
+	 * no. of slices need to be same on both the encoders.
+	 */
+	enc_ip_w = intf_ip_w / 2;
+	dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w);
+
+	for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
+		dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode);
+}
+
 void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
 {
 	struct dpu_encoder_virt *dpu_enc;
 	struct dpu_encoder_phys *phys;
+	struct msm_drm_private *priv;
 	bool needs_hw_reset = false;
 	unsigned int i;
 
@@ -1803,6 +1937,10 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
 			dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]);
 		}
 	}
+
+	priv = drm_enc->dev->dev_private;
+	if (priv->dsc)
+		dpu_encoder_prep_dsc(dpu_enc, priv->dsc);
 }
 
 void dpu_encoder_kickoff(struct drm_encoder *drm_enc)
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 08/13] drm/msm: Add missing structure documentation
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (6 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 07/13] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-16  6:22 ` [PATCH v3 09/13] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
                   ` (4 subsequent siblings)
  12 siblings, 0 replies; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

Somehow documentation for dspp was missed, so add that

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index de7cb65bfc52..c4a588ad226e 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -102,6 +102,7 @@ enum msm_event_wait {
  * @num_lm:       number of layer mixers used
  * @num_enc:      number of compression encoder blocks used
  * @num_intf:     number of interfaces the panel is mounted on
+ * @num_dspp:     number of dspp blocks used
  */
 struct msm_display_topology {
 	u32 num_lm;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 09/13] drm/msm/disp/dpu1: Add support for DSC in topology
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (7 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 08/13] drm/msm: Add missing structure documentation Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 15:59   ` Dmitry Baryshkov
  2021-11-16  6:22 ` [PATCH v3 10/13] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
                   ` (3 subsequent siblings)
  12 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

For DSC to work we typically need a 2,2,1 configuration. This should
suffice for resolutions up to 4k. For more resolutions like 8k this won't
work.

Also, it is better to use 2 LMs and DSC instances as half width results
in lesser power consumption as compared to single LM, DSC at full width.

The panel has been tested only with 2,2,1 configuration, so for
now we blindly create 2,2,1 topology when DSC is enabled

Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 18 ++++++++++++++++++
 drivers/gpu/drm/msm/msm_drv.h               |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index f2ff8a504918..12f58de88ac7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -533,6 +533,8 @@ static struct msm_display_topology dpu_encoder_get_topology(
 			struct drm_display_mode *mode)
 {
 	struct msm_display_topology topology = {0};
+	struct drm_encoder *drm_enc;
+	struct msm_drm_private *priv;
 	int i, intf_count = 0;
 
 	for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
@@ -567,8 +569,24 @@ static struct msm_display_topology dpu_encoder_get_topology(
 	topology.num_enc = 0;
 	topology.num_intf = intf_count;
 
+	drm_enc = &dpu_enc->base;
+	priv = drm_enc->dev->dev_private;
+	if (priv && priv->dsc) {
+		/* In case of Display Stream Compression DSC, we would use
+		 * 2 encoders, 2 line mixers and 1 interface
+		 * this is power optimal and can drive up to (including) 4k
+		 * screens
+		 */
+		topology.num_enc = 2;
+		topology.num_dsc = 2;
+		topology.num_intf = 1;
+		topology.num_lm = 2;
+		priv->dsc->dsc_mask = BIT(0) | BIT(1);
+	}
+
 	return topology;
 }
+
 static int dpu_encoder_virt_atomic_check(
 		struct drm_encoder *drm_enc,
 		struct drm_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index c4a588ad226e..d6b25d77700e 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -103,12 +103,14 @@ enum msm_event_wait {
  * @num_enc:      number of compression encoder blocks used
  * @num_intf:     number of interfaces the panel is mounted on
  * @num_dspp:     number of dspp blocks used
+ * @num_dsc:      number of Display Stream Compression (DSC) blocks used
  */
 struct msm_display_topology {
 	u32 num_lm;
 	u32 num_enc;
 	u32 num_intf;
 	u32 num_dspp;
+	u32 num_dsc;
 };
 
 /**
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 10/13] drm/msm/disp/dpu1: Add DSC support in RM
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (8 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 09/13] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 16:01   ` Dmitry Baryshkov
  2021-11-16  6:22 ` [PATCH v3 11/13] drm/msm/dsi: add mode valid callback for dsi_mgr Vinod Koul
                   ` (2 subsequent siblings)
  12 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

This add the bits in RM to enable the DSC blocks

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h |  1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c  | 66 +++++++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h  |  1 +
 3 files changed, 68 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
index 775bcbda860f..fd6672efb096 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
@@ -146,6 +146,7 @@ struct dpu_global_state {
 	uint32_t ctl_to_enc_id[CTL_MAX - CTL_0];
 	uint32_t intf_to_enc_id[INTF_MAX - INTF_0];
 	uint32_t dspp_to_enc_id[DSPP_MAX - DSPP_0];
+	uint32_t dsc_to_enc_id[DSC_MAX - DSC_0];
 };
 
 struct dpu_global_state
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index f9c83d6e427a..c9d0fc765aaf 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -11,6 +11,7 @@
 #include "dpu_hw_intf.h"
 #include "dpu_hw_dspp.h"
 #include "dpu_hw_merge3d.h"
+#include "dpu_hw_dsc.h"
 #include "dpu_encoder.h"
 #include "dpu_trace.h"
 
@@ -75,6 +76,14 @@ int dpu_rm_destroy(struct dpu_rm *rm)
 			dpu_hw_intf_destroy(hw);
 		}
 	}
+	for (i = 0; i < ARRAY_SIZE(rm->dsc_blks); i++) {
+		struct dpu_hw_dsc *hw;
+
+		if (rm->dsc_blks[i]) {
+			hw = to_dpu_hw_dsc(rm->dsc_blks[i]);
+			dpu_hw_dsc_destroy(hw);
+		}
+	}
 
 	return 0;
 }
@@ -221,6 +230,19 @@ int dpu_rm_init(struct dpu_rm *rm,
 		rm->dspp_blks[dspp->id - DSPP_0] = &hw->base;
 	}
 
+	for (i = 0; i < cat->dsc_count; i++) {
+		struct dpu_hw_dsc *hw;
+		const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
+
+		hw = dpu_hw_dsc_init(dsc->id, mmio, cat);
+		if (IS_ERR_OR_NULL(hw)) {
+			rc = PTR_ERR(hw);
+			DPU_ERROR("failed dsc object creation: err %d\n", rc);
+			goto fail;
+		}
+		rm->dsc_blks[dsc->id - DSC_0] = &hw->base;
+	}
+
 	return 0;
 
 fail:
@@ -476,6 +498,7 @@ static int _dpu_rm_reserve_intf(
 	}
 
 	global_state->intf_to_enc_id[idx] = enc_id;
+
 	return 0;
 }
 
@@ -500,6 +523,38 @@ static int _dpu_rm_reserve_intf_related_hw(
 	return ret;
 }
 
+static int _dpu_rm_reserve_dsc(struct dpu_rm *rm,
+			       struct dpu_global_state *global_state,
+			       struct drm_encoder *enc,
+			       const struct msm_display_topology *top)
+{
+	struct msm_drm_private *priv;
+	int num_dsc = top->num_dsc;
+	int i;
+
+	priv = enc->dev->dev_private;
+
+	if (!priv)
+		return -EIO;
+
+	/* check if DSC is supported */
+	if (!priv->dsc)
+		return 0;
+
+	/* check if DSC required are allocated or not */
+	for (i = 0; i < num_dsc; i++) {
+		if (global_state->dsc_to_enc_id[i]) {
+			DPU_ERROR("DSC %d is already allocated\n", i);
+			return -EIO;
+		}
+	}
+
+	for (i = 0; i < num_dsc; i++)
+		global_state->dsc_to_enc_id[i] = enc->base.id;
+
+	return 0;
+}
+
 static int _dpu_rm_make_reservation(
 		struct dpu_rm *rm,
 		struct dpu_global_state *global_state,
@@ -526,6 +581,10 @@ static int _dpu_rm_make_reservation(
 	if (ret)
 		return ret;
 
+	ret  = _dpu_rm_reserve_dsc(rm, global_state, enc, &reqs->topology);
+	if (ret)
+		return ret;
+
 	return ret;
 }
 
@@ -567,6 +626,8 @@ void dpu_rm_release(struct dpu_global_state *global_state,
 		ARRAY_SIZE(global_state->ctl_to_enc_id), enc->base.id);
 	_dpu_rm_clear_mapping(global_state->intf_to_enc_id,
 		ARRAY_SIZE(global_state->intf_to_enc_id), enc->base.id);
+	_dpu_rm_clear_mapping(global_state->dsc_to_enc_id,
+		ARRAY_SIZE(global_state->dsc_to_enc_id), enc->base.id);
 }
 
 int dpu_rm_reserve(
@@ -640,6 +701,11 @@ int dpu_rm_get_assigned_resources(struct dpu_rm *rm,
 		hw_to_enc_id = global_state->dspp_to_enc_id;
 		max_blks = ARRAY_SIZE(rm->dspp_blks);
 		break;
+	case DPU_HW_BLK_DSC:
+		hw_blks = rm->dsc_blks;
+		hw_to_enc_id = global_state->dsc_to_enc_id;
+		max_blks = ARRAY_SIZE(rm->dsc_blks);
+		break;
 	default:
 		DPU_ERROR("blk type %d not managed by rm\n", type);
 		return 0;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
index 1f12c8d5b8aa..278d2a510b80 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
@@ -30,6 +30,7 @@ struct dpu_rm {
 	struct dpu_hw_blk *intf_blks[INTF_MAX - INTF_0];
 	struct dpu_hw_blk *dspp_blks[DSPP_MAX - DSPP_0];
 	struct dpu_hw_blk *merge_3d_blks[MERGE_3D_MAX - MERGE_3D_0];
+	struct dpu_hw_blk *dsc_blks[DSC_MAX - DSC_0];
 
 	uint32_t lm_max_width;
 };
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 11/13] drm/msm/dsi: add mode valid callback for dsi_mgr
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (9 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 10/13] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 20:33   ` Dmitry Baryshkov
  2021-11-16  6:22 ` [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
  2021-11-16  6:22 ` [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
  12 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

Add a mode valid callback for dsi_mgr for checking mode being valid in
case of DSC. For DSC the height and width needs to be multiple of slice,
so we check that here

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h         |  2 ++
 drivers/gpu/drm/msm/dsi/dsi_host.c    | 26 ++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dsi/dsi_manager.c | 12 ++++++++++++
 3 files changed, 40 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 569c8ff062ba..e7affab2fc1e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -115,6 +115,8 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host,
 int msm_dsi_host_power_off(struct mipi_dsi_host *host);
 int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
 				  const struct drm_display_mode *mode);
+enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
+					    const struct drm_display_mode *mode);
 struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host);
 unsigned long msm_dsi_host_get_mode_flags(struct mipi_dsi_host *host);
 struct drm_bridge *msm_dsi_host_get_bridge(struct mipi_dsi_host *host);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 30c1e299aa52..31d385d8d834 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -2588,6 +2588,32 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
 	return 0;
 }
 
+enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
+					    const struct drm_display_mode *mode)
+{
+	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
+	struct msm_display_dsc_config *dsc = msm_host->dsc;
+	int pic_width = mode->hdisplay;
+	int pic_height = mode->vdisplay;
+
+	if (!msm_host->dsc)
+		return MODE_OK;
+
+	if (pic_width % dsc->drm->slice_width) {
+		pr_err("DSI: pic_width %d has to be multiple of slice %d\n",
+		       pic_width, dsc->drm->slice_width);
+		return MODE_H_ILLEGAL;
+	}
+
+	if (pic_height % dsc->drm->slice_height) {
+		pr_err("DSI: pic_height %d has to be multiple of slice %d\n",
+		       pic_height, dsc->drm->slice_height);
+		return MODE_V_ILLEGAL;
+	}
+
+	return MODE_OK;
+}
+
 struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host)
 {
 	return of_drm_find_panel(to_msm_dsi_host(host)->device_node);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index 20c4d650fd80..0ad8a53aaa0e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -579,6 +579,17 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge,
 		msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode);
 }
 
+static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
+						      const struct drm_display_info *info,
+						      const struct drm_display_mode *mode)
+{
+	int id = dsi_mgr_bridge_get_id(bridge);
+	struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
+	struct mipi_dsi_host *host = msm_dsi->host;
+
+	return msm_dsi_host_check_dsc(host, mode);
+}
+
 static const struct drm_connector_funcs dsi_mgr_connector_funcs = {
 	.detect = dsi_mgr_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
@@ -600,6 +611,7 @@ static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = {
 	.disable = dsi_mgr_bridge_disable,
 	.post_disable = dsi_mgr_bridge_post_disable,
 	.mode_set = dsi_mgr_bridge_mode_set,
+	.mode_valid = dsi_mgr_bridge_mode_valid,
 };
 
 /* initialize connector when we're connected to a drm_panel */
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (10 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 11/13] drm/msm/dsi: add mode valid callback for dsi_mgr Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-18 21:47   ` kernel test robot
                     ` (2 more replies)
  2021-11-16  6:22 ` [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
  12 siblings, 3 replies; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

When DSC is enabled, we need to configure DSI registers accordingly and
configure the respective stream compression registers.

Add support to calculate the register setting based on DSC params and
timing information and configure these registers.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 +++
 drivers/gpu/drm/msm/dsi/dsi_host.c | 113 ++++++++++++++++++++++++++++-
 2 files changed, 122 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 49b551ad1bff..c1c85df58c4b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val)
 #define REG_DSI_CPHY_MODE_CTRL					0x000002d4
 
 
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL			0x0000029c
+
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2			0x000002a0
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL			0x000002a4
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2			0x000002a8
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3			0x000002ac
+
 #endif /* DSI_XML */
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 31d385d8d834..2c14c36f0b3d 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -908,6 +908,20 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
 		dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0));
 }
 
+static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
+				  int pic_width, int pic_height)
+{
+	if (!dsc || !pic_width || !pic_height) {
+		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
+		return -EINVAL;
+	}
+
+	dsc->drm->pic_width = pic_width;
+	dsc->drm->pic_height = pic_height;
+
+	return 0;
+}
+
 static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
 {
 	struct drm_display_mode *mode = msm_host->mode;
@@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
 		hdisplay /= 2;
 	}
 
+	if (msm_host->dsc) {
+		struct msm_display_dsc_config *dsc = msm_host->dsc;
+
+		/* update dsc params with timing params */
+		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
+		DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
+
+		/* we do the calculations for dsc parameters here so that
+		 * panel can use these parameters
+		 */
+		dsi_populate_dsc_params(dsc);
+
+		/* Divide the display by 3 but keep back/font porch and
+		 * pulse width same
+		 */
+		h_total -= hdisplay;
+		hdisplay /= 3;
+		h_total += hdisplay;
+		ha_end = ha_start + hdisplay;
+	}
+
 	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, intf_width, slice_per_intf;
+			u32 total_bytes_per_intf;
+
+			/* first calculate dsc parameters and then program
+			 * compress mode registers
+			 */
+			intf_width = hdisplay;
+			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
+
+			dsc->drm->slice_count = 1;
+			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
+			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
+			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
+
+			reg = dsc->bytes_per_pkt << 16;
+			reg |= (0x0b << 8);    /* dtype of compressed image */
+
+			/* pkt_per_line:
+			 * 0 == 1 pkt
+			 * 1 == 2 pkt
+			 * 2 == 4 pkt
+			 * 3 pkt is not supported
+			 * above translates to ffs() - 1
+			 */
+			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			dsi_write(msm_host,
+				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
+		}
+
 		dsi_write(msm_host, REG_DSI_ACTIVE_H,
 			DSI_ACTIVE_H_START(ha_start) |
 			DSI_ACTIVE_H_END(ha_end));
@@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
 			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
 			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
 	} else {		/* command mode */
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, reg_ctrl, reg_ctrl2;
+			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
+
+			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
+			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
+
+			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
+			bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
+						      dsc->drm->bits_per_pixel, 8);
+			dsc->drm->slice_chunk_size = bytes_in_slice;
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
+
+			reg = 0x39 << 8;
+			reg |= ffs(dsc->pkt_per_line) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			reg_ctrl |= reg;
+			reg_ctrl2 |= bytes_in_slice;
+
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
+		}
+
 		/* image data and 1 byte write_memory_start cmd */
-		wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		if (!msm_host->dsc)
+			wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		else
+			wc = mode->hdisplay / 2 + 1;
 
 		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
 			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
@@ -2051,9 +2158,13 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+	struct msm_drm_private *priv;
 	int ret;
 
 	msm_host->dev = dev;
+	priv = dev->dev_private;
+	priv->dsc = msm_host->dsc;
+
 	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
 	if (ret) {
 		pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel
  2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
                   ` (11 preceding siblings ...)
  2021-11-16  6:22 ` [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
@ 2021-11-16  6:22 ` Vinod Koul
  2021-11-24 16:28   ` Dmitry Baryshkov
  2021-11-24 16:51   ` Dmitry Baryshkov
  12 siblings, 2 replies; 41+ messages in thread
From: Vinod Koul @ 2021-11-16  6:22 UTC (permalink / raw)
  To: Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

When DSC is enabled, we need to pass the DSC parameters to panel driver
as well, so add a dsc parameter in panel and set it when DSC is enabled

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 16 +++++++++++++++-
 include/drm/drm_panel.h            |  7 +++++++
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 2c14c36f0b3d..3d5773fcf496 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -2159,11 +2159,25 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct msm_drm_private *priv;
+	struct drm_panel *panel;
 	int ret;
 
 	msm_host->dev = dev;
+	panel = msm_dsi_host_get_panel(&msm_host->base);
 	priv = dev->dev_private;
-	priv->dsc = msm_host->dsc;
+
+	if (panel && panel->dsc) {
+		struct msm_display_dsc_config *dsc = priv->dsc;
+
+		if (!dsc) {
+			dsc = kzalloc(sizeof(*dsc), GFP_KERNEL);
+			if (!dsc)
+				return -ENOMEM;
+			dsc->drm = panel->dsc;
+			priv->dsc = dsc;
+			msm_host->dsc = dsc;
+		}
+	}
 
 	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
 	if (ret) {
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 4602f833eb51..eb8ae9bf32ed 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -171,6 +171,13 @@ struct drm_panel {
 	 * Panel entry in registry.
 	 */
 	struct list_head list;
+
+	/**
+	 * @dsc:
+	 *
+	 * Panel DSC pps payload to be sent
+	 */
+	struct drm_dsc_config *dsc;
 };
 
 void drm_panel_init(struct drm_panel *panel, struct device *dev,
-- 
2.31.1


^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2021-11-16  6:22 ` [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
@ 2021-11-18 21:47   ` kernel test robot
  2021-11-24 16:21   ` Dmitry Baryshkov
  2021-12-11  0:03   ` Marijn Suijten
  2 siblings, 0 replies; 41+ messages in thread
From: kernel test robot @ 2021-11-18 21:47 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: llvm, kbuild-all, Jonathan Marek, Jeffrey Hugo, David Airlie,
	linux-arm-msm, linux-kernel, Abhinav Kumar, Bjorn Andersson,
	Vinod Koul, dri-devel

[-- Attachment #1: Type: text/plain, Size: 8095 bytes --]

Hi Vinod,

I love your patch! Perhaps something to improve:

[auto build test WARNING on drm/drm-next]
[also build test WARNING on v5.16-rc1 next-20211118]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Vinod-Koul/drm-msm-Add-Display-Stream-Compression-Support/20211116-142602
base:   git://anongit.freedesktop.org/drm/drm drm-next
config: arm64-randconfig-r036-20211118 (attached as .config)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install arm64 cross compiling tool for clang build
        # apt-get install binutils-aarch64-linux-gnu
        # https://github.com/0day-ci/linux/commit/0d90631d88b4295b0612892e62110dd3b11c9d78
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Vinod-Koul/drm-msm-Add-Display-Stream-Compression-Support/20211116-142602
        git checkout 0d90631d88b4295b0612892e62110dd3b11c9d78
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/msm/dsi/dsi_host.c:1039:13: warning: variable 'reg_ctrl' set but not used [-Wunused-but-set-variable]
                           u32 reg, reg_ctrl, reg_ctrl2;
                                    ^
   1 warning generated.


vim +/reg_ctrl +1039 drivers/gpu/drm/msm/dsi/dsi_host.c

   924	
   925	static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
   926	{
   927		struct drm_display_mode *mode = msm_host->mode;
   928		u32 hs_start = 0, vs_start = 0; /* take sync start as 0 */
   929		u32 h_total = mode->htotal;
   930		u32 v_total = mode->vtotal;
   931		u32 hs_end = mode->hsync_end - mode->hsync_start;
   932		u32 vs_end = mode->vsync_end - mode->vsync_start;
   933		u32 ha_start = h_total - mode->hsync_start;
   934		u32 ha_end = ha_start + mode->hdisplay;
   935		u32 va_start = v_total - mode->vsync_start;
   936		u32 va_end = va_start + mode->vdisplay;
   937		u32 hdisplay = mode->hdisplay;
   938		u32 wc;
   939	
   940		DBG("");
   941	
   942		/*
   943		 * For bonded DSI mode, the current DRM mode has
   944		 * the complete width of the panel. Since, the complete
   945		 * panel is driven by two DSI controllers, the horizontal
   946		 * timings have to be split between the two dsi controllers.
   947		 * Adjust the DSI host timing values accordingly.
   948		 */
   949		if (is_bonded_dsi) {
   950			h_total /= 2;
   951			hs_end /= 2;
   952			ha_start /= 2;
   953			ha_end /= 2;
   954			hdisplay /= 2;
   955		}
   956	
   957		if (msm_host->dsc) {
   958			struct msm_display_dsc_config *dsc = msm_host->dsc;
   959	
   960			/* update dsc params with timing params */
   961			dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
   962			DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
   963	
   964			/* we do the calculations for dsc parameters here so that
   965			 * panel can use these parameters
   966			 */
   967			dsi_populate_dsc_params(dsc);
   968	
   969			/* Divide the display by 3 but keep back/font porch and
   970			 * pulse width same
   971			 */
   972			h_total -= hdisplay;
   973			hdisplay /= 3;
   974			h_total += hdisplay;
   975			ha_end = ha_start + hdisplay;
   976		}
   977	
   978		if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
   979			if (msm_host->dsc) {
   980				struct msm_display_dsc_config *dsc = msm_host->dsc;
   981				u32 reg, intf_width, slice_per_intf;
   982				u32 total_bytes_per_intf;
   983	
   984				/* first calculate dsc parameters and then program
   985				 * compress mode registers
   986				 */
   987				intf_width = hdisplay;
   988				slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
   989	
   990				dsc->drm->slice_count = 1;
   991				dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
   992				total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
   993	
   994				dsc->eol_byte_num = total_bytes_per_intf % 3;
   995				dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
   996				dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
   997				dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
   998	
   999				reg = dsc->bytes_per_pkt << 16;
  1000				reg |= (0x0b << 8);    /* dtype of compressed image */
  1001	
  1002				/* pkt_per_line:
  1003				 * 0 == 1 pkt
  1004				 * 1 == 2 pkt
  1005				 * 2 == 4 pkt
  1006				 * 3 pkt is not supported
  1007				 * above translates to ffs() - 1
  1008				 */
  1009				reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
  1010	
  1011				dsc->eol_byte_num = total_bytes_per_intf % 3;
  1012				reg |= dsc->eol_byte_num << 4;
  1013				reg |= 1;
  1014	
  1015				dsi_write(msm_host,
  1016					  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
  1017			}
  1018	
  1019			dsi_write(msm_host, REG_DSI_ACTIVE_H,
  1020				DSI_ACTIVE_H_START(ha_start) |
  1021				DSI_ACTIVE_H_END(ha_end));
  1022			dsi_write(msm_host, REG_DSI_ACTIVE_V,
  1023				DSI_ACTIVE_V_START(va_start) |
  1024				DSI_ACTIVE_V_END(va_end));
  1025			dsi_write(msm_host, REG_DSI_TOTAL,
  1026				DSI_TOTAL_H_TOTAL(h_total - 1) |
  1027				DSI_TOTAL_V_TOTAL(v_total - 1));
  1028	
  1029			dsi_write(msm_host, REG_DSI_ACTIVE_HSYNC,
  1030				DSI_ACTIVE_HSYNC_START(hs_start) |
  1031				DSI_ACTIVE_HSYNC_END(hs_end));
  1032			dsi_write(msm_host, REG_DSI_ACTIVE_VSYNC_HPOS, 0);
  1033			dsi_write(msm_host, REG_DSI_ACTIVE_VSYNC_VPOS,
  1034				DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
  1035				DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
  1036		} else {		/* command mode */
  1037			if (msm_host->dsc) {
  1038				struct msm_display_dsc_config *dsc = msm_host->dsc;
> 1039				u32 reg, reg_ctrl, reg_ctrl2;
  1040				u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
  1041	
  1042				reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
  1043				reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
  1044	
  1045				slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
  1046				bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
  1047							      dsc->drm->bits_per_pixel, 8);
  1048				dsc->drm->slice_chunk_size = bytes_in_slice;
  1049				total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
  1050				dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
  1051	
  1052				reg = 0x39 << 8;
  1053				reg |= ffs(dsc->pkt_per_line) << 6;
  1054	
  1055				dsc->eol_byte_num = total_bytes_per_intf % 3;
  1056				reg |= dsc->eol_byte_num << 4;
  1057				reg |= 1;
  1058	
  1059				reg_ctrl |= reg;
  1060				reg_ctrl2 |= bytes_in_slice;
  1061	
  1062				dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
  1063				dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
  1064			}
  1065	
  1066			/* image data and 1 byte write_memory_start cmd */
  1067			if (!msm_host->dsc)
  1068				wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
  1069			else
  1070				wc = mode->hdisplay / 2 + 1;
  1071	
  1072			dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
  1073				DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
  1074				DSI_CMD_MDP_STREAM0_CTRL_VIRTUAL_CHANNEL(
  1075						msm_host->channel) |
  1076				DSI_CMD_MDP_STREAM0_CTRL_DATA_TYPE(
  1077						MIPI_DSI_DCS_LONG_WRITE));
  1078	
  1079			dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL,
  1080				DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
  1081				DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay));
  1082		}
  1083	}
  1084	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 36482 bytes --]

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 02/13] drm/msm/disp/dpu1: Add support for DSC
  2021-11-16  6:22 ` [PATCH v3 02/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
@ 2021-11-24 15:35   ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:35 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> Display Stream Compression (DSC) is one of the hw blocks in dpu, so add
> support by adding hw blocks for DSC
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   drivers/gpu/drm/msm/Makefile                  |   1 +
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  13 ++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c    | 210 ++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h    |  77 +++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |  13 ++
>   5 files changed, 314 insertions(+)
>   create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
>   create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> 
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 40577f8856d8..7d7058f1f5c1 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -59,6 +59,7 @@ msm-y := \
>   	disp/dpu1/dpu_formats.o \
>   	disp/dpu1/dpu_hw_catalog.o \
>   	disp/dpu1/dpu_hw_ctl.o \
> +	disp/dpu1/dpu_hw_dsc.o \
>   	disp/dpu1/dpu_hw_interrupts.o \
>   	disp/dpu1/dpu_hw_intf.o \
>   	disp/dpu1/dpu_hw_lm.o \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 4ade44bbd37e..65f43fadcda0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -553,6 +553,16 @@ struct dpu_merge_3d_cfg  {
>   	const struct dpu_merge_3d_sub_blks *sblk;
>   };
>   
> +/**
> + * struct dpu_dsc_cfg - information of DSC blocks
> + * @id                 enum identifying this block
> + * @base               register offset of this block
> + * @features           bit mask identifying sub-blocks/features
> + */
> +struct dpu_dsc_cfg {
> +	DPU_HW_BLK_INFO;
> +};
> +
>   /**
>    * struct dpu_intf_cfg - information of timing engine blocks
>    * @id                 enum identifying this block
> @@ -749,6 +759,9 @@ struct dpu_mdss_cfg {
>   	u32 merge_3d_count;
>   	const struct dpu_merge_3d_cfg *merge_3d;
>   
> +	u32 dsc_count;
> +	struct dpu_dsc_cfg *dsc;
> +
>   	u32 intf_count;
>   	const struct dpu_intf_cfg *intf;
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
> new file mode 100644
> index 000000000000..449d6f1dad28
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020-2021, Linaro Limited
> + */
> +
> +#include "dpu_kms.h"
> +#include "dpu_hw_catalog.h"
> +#include "dpu_hwio.h"
> +#include "dpu_hw_mdss.h"
> +#include "dpu_hw_dsc.h"
> +
> +#define DSC_COMMON_MODE	                0x000
> +#define DSC_ENC                         0X004
> +#define DSC_PICTURE                     0x008
> +#define DSC_SLICE                       0x00C
> +#define DSC_CHUNK_SIZE                  0x010
> +#define DSC_DELAY                       0x014
> +#define DSC_SCALE_INITIAL               0x018
> +#define DSC_SCALE_DEC_INTERVAL          0x01C
> +#define DSC_SCALE_INC_INTERVAL          0x020
> +#define DSC_FIRST_LINE_BPG_OFFSET       0x024
> +#define DSC_BPG_OFFSET                  0x028
> +#define DSC_DSC_OFFSET                  0x02C
> +#define DSC_FLATNESS                    0x030
> +#define DSC_RC_MODEL_SIZE               0x034
> +#define DSC_RC                          0x038
> +#define DSC_RC_BUF_THRESH               0x03C
> +#define DSC_RANGE_MIN_QP                0x074
> +#define DSC_RANGE_MAX_QP                0x0B0
> +#define DSC_RANGE_BPG_OFFSET            0x0EC
> +
> +static void dpu_hw_dsc_disable(struct dpu_hw_dsc *dsc)
> +{
> +	struct dpu_hw_blk_reg_map *c = &dsc->hw;
> +
> +	DPU_REG_WRITE(c, DSC_COMMON_MODE, 0);
> +}
> +
> +static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
> +			      struct msm_display_dsc_config *dsc, u32 mode)
> +{
> +	struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
> +	u32 data, lsb, bpp;
> +	u32 initial_lines = dsc->initial_lines;
> +	bool is_cmd_mode = !(mode & DSC_MODE_VIDEO);
> +
> +	DPU_REG_WRITE(c, DSC_COMMON_MODE, mode);
> +
> +	if (is_cmd_mode)
> +		initial_lines += 1;
> +
> +	data = (initial_lines << 20);
> +	data |= ((dsc->slice_last_group_size - 1) << 18);
> +	/* bpp is 6.4 format, 4 LSBs bits are for fractional part */
> +	data |= dsc->drm->bits_per_pixel << 12;
> +	lsb = dsc->drm->bits_per_pixel % 4;
> +	bpp = dsc->drm->bits_per_pixel / 4;
> +	bpp *= 4;
> +	bpp <<= 4;
> +	bpp |= lsb;
> +
> +	data |= bpp << 8;
> +	data |= (dsc->drm->block_pred_enable << 7);
> +	data |= (dsc->drm->line_buf_depth << 3);
> +	data |= (dsc->drm->simple_422 << 2);
> +	data |= (dsc->drm->convert_rgb << 1);
> +	data |= dsc->drm->bits_per_component;
> +
> +	DPU_REG_WRITE(c, DSC_ENC, data);
> +
> +	data = dsc->drm->pic_width << 16;
> +	data |= dsc->drm->pic_height;
> +	DPU_REG_WRITE(c, DSC_PICTURE, data);
> +
> +	data = dsc->drm->slice_width << 16;
> +	data |= dsc->drm->slice_height;
> +	DPU_REG_WRITE(c, DSC_SLICE, data);
> +
> +	data = dsc->drm->slice_chunk_size << 16;
> +	DPU_REG_WRITE(c, DSC_CHUNK_SIZE, data);
> +
> +	data = dsc->drm->initial_dec_delay << 16;
> +	data |= dsc->drm->initial_xmit_delay;
> +	DPU_REG_WRITE(c, DSC_DELAY, data);
> +
> +	data = dsc->drm->initial_scale_value;
> +	DPU_REG_WRITE(c, DSC_SCALE_INITIAL, data);
> +
> +	data = dsc->drm->scale_decrement_interval;
> +	DPU_REG_WRITE(c, DSC_SCALE_DEC_INTERVAL, data);
> +
> +	data = dsc->drm->scale_increment_interval;
> +	DPU_REG_WRITE(c, DSC_SCALE_INC_INTERVAL, data);
> +
> +	data = dsc->drm->first_line_bpg_offset;
> +	DPU_REG_WRITE(c, DSC_FIRST_LINE_BPG_OFFSET, data);
> +
> +	data = dsc->drm->nfl_bpg_offset << 16;
> +	data |= dsc->drm->slice_bpg_offset;
> +	DPU_REG_WRITE(c, DSC_BPG_OFFSET, data);
> +
> +	data = dsc->drm->initial_offset << 16;
> +	data |= dsc->drm->final_offset;
> +	DPU_REG_WRITE(c, DSC_DSC_OFFSET, data);
> +
> +	data = dsc->det_thresh_flatness << 10;
> +	data |= dsc->drm->flatness_max_qp << 5;
> +	data |= dsc->drm->flatness_min_qp;
> +	DPU_REG_WRITE(c, DSC_FLATNESS, data);
> +
> +	data = dsc->drm->rc_model_size;
> +	DPU_REG_WRITE(c, DSC_RC_MODEL_SIZE, data);
> +
> +	data = dsc->drm->rc_tgt_offset_low << 18;
> +	data |= dsc->drm->rc_tgt_offset_high << 14;
> +	data |= dsc->drm->rc_quant_incr_limit1 << 9;
> +	data |= dsc->drm->rc_quant_incr_limit0 << 4;
> +	data |= dsc->drm->rc_edge_factor;
> +	DPU_REG_WRITE(c, DSC_RC, data);
> +}
> +
> +static void dpu_hw_dsc_config_thresh(struct dpu_hw_dsc *hw_dsc,
> +				     struct msm_display_dsc_config *dsc)
> +{
> +	struct drm_dsc_rc_range_parameters *rc = dsc->drm->rc_range_params;
> +	struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
> +	u32 off;
> +	int i;
> +
> +	off = DSC_RC_BUF_THRESH;
> +	for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++) {
> +		DPU_REG_WRITE(c, off, dsc->drm->rc_buf_thresh[i]);
> +		off += 4;
> +	}
> +
> +	off = DSC_RANGE_MIN_QP;
> +	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
> +		DPU_REG_WRITE(c, off, rc[i].range_min_qp);
> +		off += 4;
> +	}
> +
> +	off = DSC_RANGE_MAX_QP;
> +	for (i = 0; i < 15; i++) {
> +		DPU_REG_WRITE(c, off, rc[i].range_max_qp);
> +		off += 4;
> +	}
> +
> +	off = DSC_RANGE_BPG_OFFSET;
> +	for (i = 0; i < 15; i++) {
> +		DPU_REG_WRITE(c, off, rc[i].range_bpg_offset);
> +		off += 4;
> +	}
> +}
> +
> +static struct dpu_dsc_cfg *_dsc_offset(enum dpu_dsc dsc,
> +				       struct dpu_mdss_cfg *m,
> +				       void __iomem *addr,
> +				       struct dpu_hw_blk_reg_map *b)
> +{
> +	int i;
> +
> +	for (i = 0; i < m->dsc_count; i++) {
> +		if (dsc == m->dsc[i].id) {
> +			b->base_off = addr;
> +			b->blk_off = m->dsc[i].base;
> +			b->length = m->dsc[i].len;
> +			b->hwversion = m->hwversion;
> +			b->log_mask = DPU_DBG_MASK_DSC;
> +			return &m->dsc[i];
> +		}
> +	}
> +
> +	return NULL;
> +}
> +
> +static void _setup_dsc_ops(struct dpu_hw_dsc_ops *ops,
> +			   unsigned long cap)
> +{
> +	ops->dsc_disable = dpu_hw_dsc_disable;
> +	ops->dsc_config = dpu_hw_dsc_config;
> +	ops->dsc_config_thresh = dpu_hw_dsc_config_thresh;
> +};
> +
> +struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void __iomem *addr,
> +				   struct dpu_mdss_cfg *m)
> +{
> +	struct dpu_hw_dsc *c;
> +	struct dpu_dsc_cfg *cfg;
> +
> +	c = kzalloc(sizeof(*c), GFP_KERNEL);
> +	if (!c)
> +		return ERR_PTR(-ENOMEM);
> +
> +	cfg = _dsc_offset(idx, m, addr, &c->hw);
> +	if (IS_ERR_OR_NULL(cfg)) {
> +		kfree(c);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	c->idx = idx;
> +	c->caps = cfg;
> +	_setup_dsc_ops(&c->ops, c->caps->features);
> +
> +	return c;
> +}
> +
> +void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc)
> +{
> +	kfree(dsc);
> +}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> new file mode 100644
> index 000000000000..648c9e4d8749
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> @@ -0,0 +1,77 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/* Copyright (c) 2020-2021, Linaro Limited */
> +
> +#ifndef _DPU_HW_DSC_H
> +#define _DPU_HW_DSC_H
> +
> +#include <drm/drm_dsc.h>
> +
> +#define DSC_MODE_SPLIT_PANEL            BIT(0)
> +#define DSC_MODE_MULTIPLEX              BIT(1)
> +#define DSC_MODE_VIDEO                  BIT(2)
> +
> +struct dpu_hw_dsc;
> +
> +/**
> + * struct dpu_hw_dsc_ops - interface to the dsc hardware driver functions
> + * Assumption is these functions will be called after clocks are enabled
> + */
> +struct dpu_hw_dsc_ops {
> +	/**
> +	 * dsc_disable - disable dsc
> +	 * @hw_dsc: Pointer to dsc context
> +	 */
> +	void (*dsc_disable)(struct dpu_hw_dsc *hw_dsc);
> +
> +	/**
> +	 * dsc_config - configures dsc encoder
> +	 * @hw_dsc: Pointer to dsc context
> +	 * @dsc: panel dsc parameters
> +	 * @mode: dsc topology mode to be set
> +	 */
> +	void (*dsc_config)(struct dpu_hw_dsc *hw_dsc,
> +			   struct msm_display_dsc_config *dsc, u32 mode);
> +
> +	/**
> +	 * dsc_config_thresh - programs panel thresholds
> +	 * @hw_dsc: Pointer to dsc context
> +	 * @dsc: panel dsc parameters
> +	 */
> +	void (*dsc_config_thresh)(struct dpu_hw_dsc *hw_dsc,
> +				  struct msm_display_dsc_config *dsc);
> +};
> +
> +struct dpu_hw_dsc {
> +	struct dpu_hw_blk base;
> +	struct dpu_hw_blk_reg_map hw;
> +
> +	/* dsc */
> +	enum dpu_dsc idx;
> +	const struct dpu_dsc_cfg *caps;
> +
> +	/* ops */
> +	struct dpu_hw_dsc_ops ops;
> +};
> +
> +/**
> + * dpu_hw_dsc_init - initializes the dsc block for the passed dsc idx.
> + * @idx:  DSC index for which driver object is required
> + * @addr: Mapped register io address of MDP
> + * @m:    Pointer to mdss catalog data
> + * Returns: Error code or allocated dpu_hw_dsc context
> + */
> +struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void __iomem *addr,
> +				   struct dpu_mdss_cfg *m);
> +
> +/**
> + * dpu_hw_dsc_destroy - destroys dsc driver context
> + * @dsc:   Pointer to dsc driver context returned by dpu_hw_dsc_init
> + */
> +void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc);
> +
> +static inline struct dpu_hw_dsc *to_dpu_hw_dsc(struct dpu_hw_blk *hw)
> +{
> +	return container_of(hw, struct dpu_hw_dsc, base);
> +}
> +
> +#endif /* _DPU_HW_DSC_H */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index bb9ceadeb0bb..b0ce8cb97d22 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -97,6 +97,7 @@ enum dpu_hw_blk_type {
>   	DPU_HW_BLK_WB,
>   	DPU_HW_BLK_DSPP,
>   	DPU_HW_BLK_MERGE_3D,
> +	DPU_HW_BLK_DSC,
>   	DPU_HW_BLK_MAX,
>   };
>   
> @@ -176,6 +177,17 @@ enum dpu_ctl {
>   	CTL_MAX
>   };
>   
> +enum dpu_dsc {
> +	DSC_NONE = 0,
> +	DSC_0,
> +	DSC_1,
> +	DSC_2,
> +	DSC_3,
> +	DSC_4,
> +	DSC_5,
> +	DSC_MAX
> +};
> +
>   enum dpu_pingpong {
>   	PINGPONG_0 = 1,
>   	PINGPONG_1,
> @@ -437,5 +449,6 @@ struct dpu_mdss_color {
>   #define DPU_DBG_MASK_VBIF     (1 << 8)
>   #define DPU_DBG_MASK_ROT      (1 << 9)
>   #define DPU_DBG_MASK_DSPP     (1 << 10)
> +#define DPU_DBG_MASK_DSC      (1 << 11)
>   
>   #endif  /* _DPU_HW_MDSS_H */
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d
  2021-11-16  6:22 ` [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
@ 2021-11-24 15:39   ` Dmitry Baryshkov
  2021-11-24 15:40   ` Dmitry Baryshkov
  2021-11-24 15:43   ` Dmitry Baryshkov
  2 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:39 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> We cannot enable mode_3d when we are using the DSC. So pass
> configuration to detect DSC is enabled and not enable mode_3d
> when we are using DSC
> 
> We add a helper dpu_encoder_helper_get_dsc() to detect dsc
> enabled and pass this to .setup_intf_cfg()
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  3 ++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
>   4 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index e7270eb6b84b..efb85d595598 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
>   	return BLEND_3D_NONE;
>   }
>   
> +static inline bool dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc)
> +{
> +	struct drm_encoder *drm_enc = phys_enc->parent;
> +	struct msm_drm_private *priv = drm_enc->dev->dev_private;
> +
> +	if (priv->dsc)
> +		return priv->dsc->dsc_mask;
> +
> +	return 0;
> +}
> +
>   /**
>    * dpu_encoder_helper_split_config - split display configuration helper function
>    *	This helper function may be used by physical encoders to configure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index 34a6940d12c5..f3f00f4d0193 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
>   	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
>   	intf_cfg.stream_sel = cmd_enc->stream_sel;
>   	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> +	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> +

I'd prefer if we disable mode_3d here, rather than ignoring it in the 
dpu_hw_ctl_intf_cfg()

>   	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
>   }
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 64740ddb983e..36831457a91b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
>   
>   	intf_cfg |= (cfg->intf & 0xF) << 4;
>   
> -	if (cfg->mode_3d) {
> +	/* In DSC we can't set merge, so check for dsc too */
> +	if (cfg->mode_3d && !cfg->dsc) {

I think here'd better have WARN_ON(cfg->mode_3d && cfg->dsc) or similar 
dev_warn().

>   		intf_cfg |= BIT(19);
>   		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
>   	}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 806c171e5df2..9847c9c46d6f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
>    * @merge_3d:              3d merge block used
>    * @intf_mode_sel:         Interface mode, cmd / vid
>    * @stream_sel:            Stream selection for multi-stream interfaces
> + * @dsc:                   DSC BIT masks
>    */
>   struct dpu_hw_intf_cfg {
>   	enum dpu_intf intf;
> @@ -47,6 +48,7 @@ struct dpu_hw_intf_cfg {
>   	enum dpu_merge_3d merge_3d;
>   	enum dpu_ctl_mode_sel intf_mode_sel;
>   	int stream_sel;
> +	unsigned int dsc;
>   };
>   
>   /**
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d
  2021-11-16  6:22 ` [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
  2021-11-24 15:39   ` Dmitry Baryshkov
@ 2021-11-24 15:40   ` Dmitry Baryshkov
  2021-11-24 15:57     ` Dmitry Baryshkov
  2021-11-24 15:43   ` Dmitry Baryshkov
  2 siblings, 1 reply; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:40 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> We cannot enable mode_3d when we are using the DSC. So pass
> configuration to detect DSC is enabled and not enable mode_3d
> when we are using DSC
> 
> We add a helper dpu_encoder_helper_get_dsc() to detect dsc
> enabled and pass this to .setup_intf_cfg()
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  3 ++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
>   4 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index e7270eb6b84b..efb85d595598 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
>   	return BLEND_3D_NONE;
>   }
>   
> +static inline bool dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc)
> +{
> +	struct drm_encoder *drm_enc = phys_enc->parent;
> +	struct msm_drm_private *priv = drm_enc->dev->dev_private;
> +
> +	if (priv->dsc)
> +		return priv->dsc->dsc_mask;

dsc_mask doesn't exist at this point, so the patch should be moved later 
in the series.

> +
> +	return 0;
> +}
> +
>   /**
>    * dpu_encoder_helper_split_config - split display configuration helper function
>    *	This helper function may be used by physical encoders to configure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index 34a6940d12c5..f3f00f4d0193 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
>   	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
>   	intf_cfg.stream_sel = cmd_enc->stream_sel;
>   	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> +	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> +
>   	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
>   }
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 64740ddb983e..36831457a91b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
>   
>   	intf_cfg |= (cfg->intf & 0xF) << 4;
>   
> -	if (cfg->mode_3d) {
> +	/* In DSC we can't set merge, so check for dsc too */
> +	if (cfg->mode_3d && !cfg->dsc) {
>   		intf_cfg |= BIT(19);
>   		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
>   	}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 806c171e5df2..9847c9c46d6f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
>    * @merge_3d:              3d merge block used
>    * @intf_mode_sel:         Interface mode, cmd / vid
>    * @stream_sel:            Stream selection for multi-stream interfaces
> + * @dsc:                   DSC BIT masks
>    */
>   struct dpu_hw_intf_cfg {
>   	enum dpu_intf intf;
> @@ -47,6 +48,7 @@ struct dpu_hw_intf_cfg {
>   	enum dpu_merge_3d merge_3d;
>   	enum dpu_ctl_mode_sel intf_mode_sel;
>   	int stream_sel;
> +	unsigned int dsc;
>   };
>   
>   /**
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl
  2021-11-16  6:22 ` [PATCH v3 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
@ 2021-11-24 15:40   ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:40 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> Later gens of hardware have DSC bits moved to hw_ctl, so configure these
> bits so that DSC would work there as well
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 11 ++++++++++-
>   1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 36831457a91b..66b0c44118d8 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -25,6 +25,8 @@
>   #define   CTL_MERGE_3D_ACTIVE           0x0E4
>   #define   CTL_INTF_ACTIVE               0x0F4
>   #define   CTL_MERGE_3D_FLUSH            0x100
> +#define   CTL_DSC_ACTIVE                0x0E8
> +#define   CTL_DSC_FLUSH                0x104
>   #define   CTL_INTF_FLUSH                0x110
>   #define   CTL_INTF_MASTER               0x134
>   #define   CTL_FETCH_PIPE_ACTIVE         0x0FC
> @@ -34,6 +36,7 @@
>   
>   #define DPU_REG_RESET_TIMEOUT_US        2000
>   #define  MERGE_3D_IDX   23
> +#define  DSC_IDX        22
>   #define  INTF_IDX       31
>   #define CTL_INVALID_BIT                 0xffff
>   
> @@ -120,7 +123,6 @@ static u32 dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
>   
>   static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
>   {
> -
>   	if (ctx->pending_flush_mask & BIT(MERGE_3D_IDX))
>   		DPU_REG_WRITE(&ctx->hw, CTL_MERGE_3D_FLUSH,
>   				ctx->pending_merge_3d_flush_mask);
> @@ -498,6 +500,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
>   	u32 intf_active = 0;
>   	u32 mode_sel = 0;
>   
> +	if (cfg->dsc)
> +		DPU_REG_WRITE(&ctx->hw, CTL_DSC_FLUSH, cfg->dsc);
> +
>   	if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD)
>   		mode_sel |= BIT(17);
>   
> @@ -509,6 +514,10 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
>   	if (cfg->merge_3d)
>   		DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
>   			      BIT(cfg->merge_3d - MERGE_3D_0));
> +	if (cfg->dsc) {
> +		DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, cfg->dsc);
> +		DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
> +	}
>   }
>   
>   static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d
  2021-11-16  6:22 ` [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
  2021-11-24 15:39   ` Dmitry Baryshkov
  2021-11-24 15:40   ` Dmitry Baryshkov
@ 2021-11-24 15:43   ` Dmitry Baryshkov
  2 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:43 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> We cannot enable mode_3d when we are using the DSC. So pass
> configuration to detect DSC is enabled and not enable mode_3d
> when we are using DSC
> 
> We add a helper dpu_encoder_helper_get_dsc() to detect dsc
> enabled and pass this to .setup_intf_cfg()
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  3 ++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
>   4 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index e7270eb6b84b..efb85d595598 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
>   	return BLEND_3D_NONE;
>   }
>   
> +static inline bool dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc)
> +{
> +	struct drm_encoder *drm_enc = phys_enc->parent;
> +	struct msm_drm_private *priv = drm_enc->dev->dev_private;
> +
> +	if (priv->dsc)
> +		return priv->dsc->dsc_mask;
> +
> +	return 0;
> +}
> +
>   /**
>    * dpu_encoder_helper_split_config - split display configuration helper function
>    *	This helper function may be used by physical encoders to configure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index 34a6940d12c5..f3f00f4d0193 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
>   	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
>   	intf_cfg.stream_sel = cmd_enc->stream_sel;
>   	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> +	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> +

You are going to hate me for the comments on this patch. But this chunk 
should also go into dpu_encoder_phys_vid.c, shouldn't it?

>   	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
>   }
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 64740ddb983e..36831457a91b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
>   
>   	intf_cfg |= (cfg->intf & 0xF) << 4;
>   
> -	if (cfg->mode_3d) {
> +	/* In DSC we can't set merge, so check for dsc too */
> +	if (cfg->mode_3d && !cfg->dsc) {
>   		intf_cfg |= BIT(19);
>   		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
>   	}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 806c171e5df2..9847c9c46d6f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
>    * @merge_3d:              3d merge block used
>    * @intf_mode_sel:         Interface mode, cmd / vid
>    * @stream_sel:            Stream selection for multi-stream interfaces
> + * @dsc:                   DSC BIT masks
>    */
>   struct dpu_hw_intf_cfg {
>   	enum dpu_intf intf;
> @@ -47,6 +48,7 @@ struct dpu_hw_intf_cfg {
>   	enum dpu_merge_3d merge_3d;
>   	enum dpu_ctl_mode_sel intf_mode_sel;
>   	int stream_sel;
> +	unsigned int dsc;
>   };
>   
>   /**
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 01/13] drm/msm/dsi: add support for dsc data
  2021-11-16  6:22 ` [PATCH v3 01/13] drm/msm/dsi: add support for dsc data Vinod Koul
@ 2021-11-24 15:53   ` Dmitry Baryshkov
  2021-11-30  1:14   ` [Freedreno] " Abhinav Kumar
  1 sibling, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:53 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> Display Stream Compression (DSC) parameters need to be calculated. Add
> helpers and struct msm_display_dsc_config in msm_drv for this
> msm_display_dsc_config uses drm_dsc_config for DSC parameters.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 132 +++++++++++++++++++++++++++++
>   drivers/gpu/drm/msm/msm_drv.h      |  20 +++++
>   2 files changed, 152 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index f69a125f9559..30c1e299aa52 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -31,6 +31,8 @@
>   
>   #define DSI_RESET_TOGGLE_DELAY_MS 20
>   
> +static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc);
> +
>   static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
>   {
>   	u32 ver;
> @@ -157,6 +159,7 @@ struct msm_dsi_host {
>   	struct regmap *sfpb;
>   
>   	struct drm_display_mode *mode;
> +	struct msm_display_dsc_config *dsc;
>   
>   	/* connected device info */
>   	struct device_node *device_node;
> @@ -1710,6 +1713,135 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host,
>   	return -EINVAL;
>   }
>   
> +static u32 dsi_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
> +	0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62,
> +	0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
> +};
> +
> +/* only 8bpc, 8bpp added */
> +static char min_qp[DSC_NUM_BUF_RANGES] = {
> +	0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13
> +};
> +
> +static char max_qp[DSC_NUM_BUF_RANGES] = {
> +	4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15
> +};
> +
> +static char bpg_offset[DSC_NUM_BUF_RANGES] = {
> +	2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12
> +};
> +
> +static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc)
> +{
> +	int mux_words_size;
> +	int groups_per_line, groups_total;
> +	int min_rate_buffer_size;
> +	int hrd_delay;
> +	int pre_num_extra_mux_bits, num_extra_mux_bits;
> +	int slice_bits;
> +	int target_bpp_x16;
> +	int data;
> +	int final_value, final_scale;
> +	int i;
> +
> +	dsc->drm->rc_model_size = 8192;
> +	dsc->drm->first_line_bpg_offset = 12;
> +	dsc->drm->rc_edge_factor = 6;
> +	dsc->drm->rc_tgt_offset_high = 3;
> +	dsc->drm->rc_tgt_offset_low = 3;
> +	dsc->drm->simple_422 = 0;
> +	dsc->drm->convert_rgb = 1;
> +	dsc->drm->vbr_enable = 0;
> +
> +	/* handle only bpp = bpc = 8 */
> +	for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++)
> +		dsc->drm->rc_buf_thresh[i] = dsi_dsc_rc_buf_thresh[i];
> +
> +	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
> +		dsc->drm->rc_range_params[i].range_min_qp = min_qp[i];
> +		dsc->drm->rc_range_params[i].range_max_qp = max_qp[i];
> +		dsc->drm->rc_range_params[i].range_bpg_offset = bpg_offset[i];
> +	}
> +
> +	dsc->drm->initial_offset = 6144; /* Not bpp 12 */
> +	if (dsc->drm->bits_per_pixel != 8)
> +		dsc->drm->initial_offset = 2048;	/* bpp = 12 */
> +
> +	mux_words_size = 48;		/* bpc == 8/10 */
> +	if (dsc->drm->bits_per_component == 12)
> +		mux_words_size = 64;
> +
> +	dsc->drm->initial_xmit_delay = 512;
> +	dsc->drm->initial_scale_value = 32;
> +	dsc->drm->first_line_bpg_offset = 12;
> +	dsc->drm->line_buf_depth = dsc->drm->bits_per_component + 1;
> +
> +	/* bpc 8 */
> +	dsc->drm->flatness_min_qp = 3;
> +	dsc->drm->flatness_max_qp = 12;
> +	dsc->det_thresh_flatness = 7 + 2 * (dsc->drm->bits_per_component - 8);
> +	dsc->drm->rc_quant_incr_limit0 = 11;
> +	dsc->drm->rc_quant_incr_limit1 = 11;
> +	dsc->drm->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
> +
> +	/* FIXME: need to call drm_dsc_compute_rc_parameters() so that rest of
> +	 * params are calculated
> +	 */
> +	dsc->slice_last_group_size = 3 - (dsc->drm->slice_width % 3);
> +	groups_per_line = DIV_ROUND_UP(dsc->drm->slice_width, 3);
> +	dsc->drm->slice_chunk_size = dsc->drm->slice_width * dsc->drm->bits_per_pixel / 8;
> +	if ((dsc->drm->slice_width * dsc->drm->bits_per_pixel) % 8)
> +		dsc->drm->slice_chunk_size++;
> +
> +	/* rbs-min */
> +	min_rate_buffer_size =  dsc->drm->rc_model_size - dsc->drm->initial_offset +
> +				dsc->drm->initial_xmit_delay * dsc->drm->bits_per_pixel +
> +				groups_per_line * dsc->drm->first_line_bpg_offset;
> +
> +	hrd_delay = DIV_ROUND_UP(min_rate_buffer_size, dsc->drm->bits_per_pixel);
> +
> +	dsc->drm->initial_dec_delay = hrd_delay - dsc->drm->initial_xmit_delay;
> +
> +	dsc->drm->initial_scale_value = 8 * dsc->drm->rc_model_size /
> +				       (dsc->drm->rc_model_size - dsc->drm->initial_offset);
> +
> +	slice_bits = 8 * dsc->drm->slice_chunk_size * dsc->drm->slice_height;
> +
> +	groups_total = groups_per_line * dsc->drm->slice_height;
> +
> +	data = dsc->drm->first_line_bpg_offset * 2048;
> +
> +	dsc->drm->nfl_bpg_offset = DIV_ROUND_UP(data, (dsc->drm->slice_height - 1));
> +
> +	pre_num_extra_mux_bits = 3 * (mux_words_size + (4 * dsc->drm->bits_per_component + 4) - 2);
> +
> +	num_extra_mux_bits = pre_num_extra_mux_bits - (mux_words_size -
> +			     ((slice_bits - pre_num_extra_mux_bits) % mux_words_size));
> +
> +	data = 2048 * (dsc->drm->rc_model_size - dsc->drm->initial_offset + num_extra_mux_bits);
> +	dsc->drm->slice_bpg_offset = DIV_ROUND_UP(data, groups_total);
> +
> +	/* bpp * 16 + 0.5 */
> +	data = dsc->drm->bits_per_pixel * 16;
> +	data *= 2;
> +	data++;
> +	data /= 2;
> +	target_bpp_x16 = data;
> +
> +	data = (dsc->drm->initial_xmit_delay * target_bpp_x16) / 16;
> +	final_value =  dsc->drm->rc_model_size - data + num_extra_mux_bits;
> +	dsc->drm->final_offset = final_value;
> +
> +	final_scale = 8 * dsc->drm->rc_model_size / (dsc->drm->rc_model_size - final_value);
> +
> +	data = (final_scale - 9) * (dsc->drm->nfl_bpg_offset + dsc->drm->slice_bpg_offset);
> +	dsc->drm->scale_increment_interval = (2048 * dsc->drm->final_offset) / data;
> +
> +	dsc->drm->scale_decrement_interval = groups_per_line / (dsc->drm->initial_scale_value - 8);
> +
> +	return 0;
> +}
> +
>   static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
>   {
>   	struct device *dev = &msm_host->pdev->dev;
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index 69952b239384..de7cb65bfc52 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -30,6 +30,7 @@
>   #include <drm/drm_plane_helper.h>
>   #include <drm/drm_probe_helper.h>
>   #include <drm/drm_fb_helper.h>
> +#include <drm/drm_dsc.h>
>   #include <drm/msm_drm.h>
>   #include <drm/drm_gem.h>
>   
> @@ -134,6 +135,22 @@ struct msm_drm_thread {
>   	struct kthread_worker *worker;
>   };
>   
> +/* DSC config */
> +struct msm_display_dsc_config {
> +	struct drm_dsc_config *drm;
> +
> +	u32 initial_lines;
> +	u32 pkt_per_line;
> +	u32 bytes_in_slice;
> +	u32 bytes_per_pkt;
> +	u32 eol_byte_num;
> +	u32 pclk_per_line;
> +	u32 slice_last_group_size;
> +	u32 det_thresh_flatness;
> +
> +	unsigned int dsc_mask;

Here you have a bitmask, but it is never used in this way (you never 
read actual values from it). So I'd suggest to drop it.

> +};
> +
>   struct msm_drm_private {
>   
>   	struct drm_device *dev;
> @@ -228,6 +245,9 @@ struct msm_drm_private {
>   	/* Properties */
>   	struct drm_property *plane_property[PLANE_PROP_MAX_NUM];
>   
> +	/* DSC configuration */
> +	struct msm_display_dsc_config *dsc;

Let's make it `stuct msm_display_dsc_config * dsc[2]` at least. This way 
DSI0 and DSI1 will know if DSC should be used for the respective host.
Otherwise DSC can get enabled for DP encoder if there an attached DSC 
DSI panel.

> +
>   	/* VRAM carveout, used when no IOMMU: */
>   	struct {
>   		unsigned long size;
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d
  2021-11-24 15:40   ` Dmitry Baryshkov
@ 2021-11-24 15:57     ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:57 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On Wed, 24 Nov 2021 at 18:40, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On 16/11/2021 09:22, Vinod Koul wrote:
> > We cannot enable mode_3d when we are using the DSC. So pass
> > configuration to detect DSC is enabled and not enable mode_3d
> > when we are using DSC
> >
> > We add a helper dpu_encoder_helper_get_dsc() to detect dsc
> > enabled and pass this to .setup_intf_cfg()
> >
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  3 ++-
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
> >   4 files changed, 17 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> > index e7270eb6b84b..efb85d595598 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> > @@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
> >       return BLEND_3D_NONE;
> >   }
> >
> > +static inline bool dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc)

Here you are returning the mask, so it should not be bool.

> > +{
> > +     struct drm_encoder *drm_enc = phys_enc->parent;
> > +     struct msm_drm_private *priv = drm_enc->dev->dev_private;
> > +
> > +     if (priv->dsc)
> > +             return priv->dsc->dsc_mask;
>
> dsc_mask doesn't exist at this point, so the patch should be moved later
> in the series.

Please ignore this comment, dsc mask already exists.

>
> > +
> > +     return 0;
> > +}
> > +
> >   /**
> >    * dpu_encoder_helper_split_config - split display configuration helper function
> >    *  This helper function may be used by physical encoders to configure
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> > index 34a6940d12c5..f3f00f4d0193 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> > @@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
> >       intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
> >       intf_cfg.stream_sel = cmd_enc->stream_sel;
> >       intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> > +     intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> > +
> >       ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
> >   }
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > index 64740ddb983e..36831457a91b 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > @@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
> >
> >       intf_cfg |= (cfg->intf & 0xF) << 4;
> >
> > -     if (cfg->mode_3d) {
> > +     /* In DSC we can't set merge, so check for dsc too */
> > +     if (cfg->mode_3d && !cfg->dsc) {
> >               intf_cfg |= BIT(19);
> >               intf_cfg |= (cfg->mode_3d - 0x1) << 20;
> >       }
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> > index 806c171e5df2..9847c9c46d6f 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> > @@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
> >    * @merge_3d:              3d merge block used
> >    * @intf_mode_sel:         Interface mode, cmd / vid
> >    * @stream_sel:            Stream selection for multi-stream interfaces
> > + * @dsc:                   DSC BIT masks
> >    */
> >   struct dpu_hw_intf_cfg {
> >       enum dpu_intf intf;
> > @@ -47,6 +48,7 @@ struct dpu_hw_intf_cfg {
> >       enum dpu_merge_3d merge_3d;
> >       enum dpu_ctl_mode_sel intf_mode_sel;
> >       int stream_sel;
> > +     unsigned int dsc;
> >   };
> >


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 07/13] drm/msm/disp/dpu1: Add support for DSC in encoder
  2021-11-16  6:22 ` [PATCH v3 07/13] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
@ 2021-11-24 15:58   ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:58 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> We need to configure the encoder for DSC configuration and calculate DSC
> parameters for the given timing so this patch adds that support by
> adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 140 +++++++++++++++++++-
>   1 file changed, 139 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index e7ee4cfb8461..f2ff8a504918 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -21,6 +21,7 @@
>   #include "dpu_hw_intf.h"
>   #include "dpu_hw_ctl.h"
>   #include "dpu_hw_dspp.h"
> +#include "dpu_hw_dsc.h"
>   #include "dpu_formats.h"
>   #include "dpu_encoder_phys.h"
>   #include "dpu_crtc.h"
> @@ -136,6 +137,7 @@ enum dpu_enc_rc_states {
>    * @cur_slave:		As above but for the slave encoder.
>    * @hw_pp:		Handle to the pingpong blocks used for the display. No.
>    *			pingpong blocks can be different than num_phys_encs.
> + * @hw_dsc:		Handle to the DSC blocks used for the display.
>    * @intfs_swapped:	Whether or not the phys_enc interfaces have been swapped
>    *			for partial update right-only cases, such as pingpong
>    *			split where virtual pingpong does not generate IRQs
> @@ -182,6 +184,7 @@ struct dpu_encoder_virt {
>   	struct dpu_encoder_phys *cur_master;
>   	struct dpu_encoder_phys *cur_slave;
>   	struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
> +	struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
>   
>   	bool intfs_swapped;
>   
> @@ -972,7 +975,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
>   	struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
>   	struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
>   	struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL };
> -	int num_lm, num_ctl, num_pp;
> +	struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC];
> +	int num_lm, num_ctl, num_pp, num_dsc;
>   	int i, j;
>   
>   	if (!drm_enc) {
> @@ -1030,6 +1034,14 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
>   		dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i])
>   						: NULL;
>   
> +	if (priv->dsc) {
> +		num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
> +							drm_enc->base.id, DPU_HW_BLK_DSC,
> +							hw_dsc, ARRAY_SIZE(hw_dsc));
> +		for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
> +			dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL;
> +	}
> +
>   	cstate = to_dpu_crtc_state(drm_crtc->state);
>   
>   	for (i = 0; i < num_lm; i++) {
> @@ -1772,10 +1784,132 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work)
>   			nsecs_to_jiffies(ktime_to_ns(wakeup_time)));
>   }
>   
> +static void
> +dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width)
> +{
> +	int slice_count, slice_per_intf;
> +	int bytes_in_slice, total_bytes_per_intf;
> +
> +	if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) {
> +		DPU_ERROR("Invalid DSC/slices\n");
> +		return;
> +	}
> +
> +	slice_count = dsc->drm->slice_count;
> +	slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width);
> +
> +	/*
> +	 * If slice_count is greater than slice_per_intf then default to 1.
> +	 * This can happen during partial update.
> +	 */
> +	if (slice_count > slice_per_intf)
> +		slice_count = 1;
> +
> +	bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
> +				      dsc->drm->bits_per_pixel, 8);
> +	total_bytes_per_intf = bytes_in_slice * slice_per_intf;
> +
> +	dsc->eol_byte_num = total_bytes_per_intf % 3;
> +	dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
> +	dsc->bytes_in_slice = bytes_in_slice;
> +	dsc->bytes_per_pkt = bytes_in_slice * slice_count;
> +	dsc->pkt_per_line = slice_per_intf / slice_count;
> +}
> +
> +static void
> +dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc,
> +				  u32 enc_ip_width)
> +{
> +	int ssm_delay, total_pixels, soft_slice_per_enc;
> +
> +	soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width;
> +
> +	/*
> +	 * minimum number of initial line pixels is a sum of:
> +	 * 1. sub-stream multiplexer delay (83 groups for 8bpc,
> +	 *    91 for 10 bpc) * 3
> +	 * 2. for two soft slice cases, add extra sub-stream multiplexer * 3
> +	 * 3. the initial xmit delay
> +	 * 4. total pipeline delay through the "lock step" of encoder (47)
> +	 * 5. 6 additional pixels as the output of the rate buffer is
> +	 *    48 bits wide
> +	 */
> +	ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92);
> +	total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47;
> +	if (soft_slice_per_enc > 1)
> +		total_pixels += (ssm_delay * 3);
> +	dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width);
> +}
> +
> +static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
> +				     struct dpu_hw_pingpong *hw_pp,
> +				     struct msm_display_dsc_config *dsc,
> +				     u32 common_mode)
> +{
> +	if (hw_dsc->ops.dsc_config)
> +		hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode);
> +
> +	if (hw_dsc->ops.dsc_config_thresh)
> +		hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc);
> +
> +	if (hw_pp->ops.setup_dsc)
> +		hw_pp->ops.setup_dsc(hw_pp);
> +
> +	if (hw_pp->ops.enable_dsc)
> +		hw_pp->ops.enable_dsc(hw_pp);
> +}
> +
> +static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
> +				 struct msm_display_dsc_config *dsc)
> +{
> +	/* coding only for 2LM, 2enc, 1 dsc config */
> +	struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
> +	struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
> +	struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
> +	int this_frame_slices;
> +	int intf_ip_w, enc_ip_w;
> +	int dsc_common_mode;
> +	int pic_width;
> +	int i;
> +
> +	for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
> +		hw_pp[i] = dpu_enc->hw_pp[i];
> +		hw_dsc[i] = dpu_enc->hw_dsc[i];
> +
> +		if (!hw_pp[i] || !hw_dsc[i]) {
> +			DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n");
> +			return;
> +		}
> +	}
> +
> +	dsc_common_mode = 0;
> +	pic_width = dsc->drm->pic_width;
> +
> +	dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL;
> +	if (enc_master->intf_mode == INTF_MODE_VIDEO)
> +		dsc_common_mode |= DSC_MODE_VIDEO;
> +
> +	this_frame_slices = pic_width / dsc->drm->slice_width;
> +	intf_ip_w = this_frame_slices * dsc->drm->slice_width;
> +
> +	dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w);
> +
> +	/*
> +	 * dsc merge case: when using 2 encoders for the same stream,
> +	 * no. of slices need to be same on both the encoders.
> +	 */
> +	enc_ip_w = intf_ip_w / 2;
> +	dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w);
> +
> +	for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
> +		dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode);
> +}
> +
>   void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
>   {
>   	struct dpu_encoder_virt *dpu_enc;
>   	struct dpu_encoder_phys *phys;
> +	struct msm_drm_private *priv;
>   	bool needs_hw_reset = false;
>   	unsigned int i;
>   
> @@ -1803,6 +1937,10 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
>   			dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]);
>   		}
>   	}
> +
> +	priv = drm_enc->dev->dev_private;
> +	if (priv->dsc)
> +		dpu_encoder_prep_dsc(dpu_enc, priv->dsc);

Only if the DSC is to be used for this encoder.

>   }
>   
>   void dpu_encoder_kickoff(struct drm_encoder *drm_enc)
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 09/13] drm/msm/disp/dpu1: Add support for DSC in topology
  2021-11-16  6:22 ` [PATCH v3 09/13] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
@ 2021-11-24 15:59   ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 15:59 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> For DSC to work we typically need a 2,2,1 configuration. This should
> suffice for resolutions up to 4k. For more resolutions like 8k this won't
> work.
> 
> Also, it is better to use 2 LMs and DSC instances as half width results
> in lesser power consumption as compared to single LM, DSC at full width.
> 
> The panel has been tested only with 2,2,1 configuration, so for
> now we blindly create 2,2,1 topology when DSC is enabled
> 
> Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org>
> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 18 ++++++++++++++++++
>   drivers/gpu/drm/msm/msm_drv.h               |  2 ++
>   2 files changed, 20 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index f2ff8a504918..12f58de88ac7 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -533,6 +533,8 @@ static struct msm_display_topology dpu_encoder_get_topology(
>   			struct drm_display_mode *mode)
>   {
>   	struct msm_display_topology topology = {0};
> +	struct drm_encoder *drm_enc;
> +	struct msm_drm_private *priv;
>   	int i, intf_count = 0;
>   
>   	for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
> @@ -567,8 +569,24 @@ static struct msm_display_topology dpu_encoder_get_topology(
>   	topology.num_enc = 0;
>   	topology.num_intf = intf_count;
>   
> +	drm_enc = &dpu_enc->base;
> +	priv = drm_enc->dev->dev_private;
> +	if (priv && priv->dsc) {
> +		/* In case of Display Stream Compression DSC, we would use
> +		 * 2 encoders, 2 line mixers and 1 interface
> +		 * this is power optimal and can drive up to (including) 4k
> +		 * screens
> +		 */
> +		topology.num_enc = 2;
> +		topology.num_dsc = 2;
> +		topology.num_intf = 1;
> +		topology.num_lm = 2;
> +		priv->dsc->dsc_mask = BIT(0) | BIT(1);

dsc_mask is still hardcoded here. We should use DSC indices returned 
from RM.

> +	}
> +
>   	return topology;
>   }
> +
>   static int dpu_encoder_virt_atomic_check(
>   		struct drm_encoder *drm_enc,
>   		struct drm_crtc_state *crtc_state,
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index c4a588ad226e..d6b25d77700e 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -103,12 +103,14 @@ enum msm_event_wait {
>    * @num_enc:      number of compression encoder blocks used
>    * @num_intf:     number of interfaces the panel is mounted on
>    * @num_dspp:     number of dspp blocks used
> + * @num_dsc:      number of Display Stream Compression (DSC) blocks used
>    */
>   struct msm_display_topology {
>   	u32 num_lm;
>   	u32 num_enc;
>   	u32 num_intf;
>   	u32 num_dspp;
> +	u32 num_dsc;
>   };
>   
>   /**
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 10/13] drm/msm/disp/dpu1: Add DSC support in RM
  2021-11-16  6:22 ` [PATCH v3 10/13] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
@ 2021-11-24 16:01   ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 16:01 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> This add the bits in RM to enable the DSC blocks
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h |  1 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c  | 66 +++++++++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h  |  1 +
>   3 files changed, 68 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> index 775bcbda860f..fd6672efb096 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> @@ -146,6 +146,7 @@ struct dpu_global_state {
>   	uint32_t ctl_to_enc_id[CTL_MAX - CTL_0];
>   	uint32_t intf_to_enc_id[INTF_MAX - INTF_0];
>   	uint32_t dspp_to_enc_id[DSPP_MAX - DSPP_0];
> +	uint32_t dsc_to_enc_id[DSC_MAX - DSC_0];
>   };
>   
>   struct dpu_global_state
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> index f9c83d6e427a..c9d0fc765aaf 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> @@ -11,6 +11,7 @@
>   #include "dpu_hw_intf.h"
>   #include "dpu_hw_dspp.h"
>   #include "dpu_hw_merge3d.h"
> +#include "dpu_hw_dsc.h"
>   #include "dpu_encoder.h"
>   #include "dpu_trace.h"
>   
> @@ -75,6 +76,14 @@ int dpu_rm_destroy(struct dpu_rm *rm)
>   			dpu_hw_intf_destroy(hw);
>   		}
>   	}
> +	for (i = 0; i < ARRAY_SIZE(rm->dsc_blks); i++) {
> +		struct dpu_hw_dsc *hw;
> +
> +		if (rm->dsc_blks[i]) {
> +			hw = to_dpu_hw_dsc(rm->dsc_blks[i]);
> +			dpu_hw_dsc_destroy(hw);
> +		}
> +	}
>   
>   	return 0;
>   }
> @@ -221,6 +230,19 @@ int dpu_rm_init(struct dpu_rm *rm,
>   		rm->dspp_blks[dspp->id - DSPP_0] = &hw->base;
>   	}
>   
> +	for (i = 0; i < cat->dsc_count; i++) {
> +		struct dpu_hw_dsc *hw;
> +		const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
> +
> +		hw = dpu_hw_dsc_init(dsc->id, mmio, cat);
> +		if (IS_ERR_OR_NULL(hw)) {
> +			rc = PTR_ERR(hw);
> +			DPU_ERROR("failed dsc object creation: err %d\n", rc);
> +			goto fail;
> +		}
> +		rm->dsc_blks[dsc->id - DSC_0] = &hw->base;
> +	}
> +
>   	return 0;
>   
>   fail:
> @@ -476,6 +498,7 @@ static int _dpu_rm_reserve_intf(
>   	}
>   
>   	global_state->intf_to_enc_id[idx] = enc_id;
> +
>   	return 0;
>   }
>   
> @@ -500,6 +523,38 @@ static int _dpu_rm_reserve_intf_related_hw(
>   	return ret;
>   }
>   
> +static int _dpu_rm_reserve_dsc(struct dpu_rm *rm,
> +			       struct dpu_global_state *global_state,
> +			       struct drm_encoder *enc,
> +			       const struct msm_display_topology *top)
> +{
> +	struct msm_drm_private *priv;
> +	int num_dsc = top->num_dsc;
> +	int i;
> +
> +	priv = enc->dev->dev_private;
> +
> +	if (!priv)
> +		return -EIO;
> +
> +	/* check if DSC is supported */
> +	if (!priv->dsc)
> +		return 0;

I don't think this check is necessary. If topology requests the DSC, 
just give away required amount of hw blocks.

> +
> +	/* check if DSC required are allocated or not */
> +	for (i = 0; i < num_dsc; i++) {
> +		if (global_state->dsc_to_enc_id[i]) {
> +			DPU_ERROR("DSC %d is already allocated\n", i);
> +			return -EIO;
> +		}
> +	}
> +
> +	for (i = 0; i < num_dsc; i++)
> +		global_state->dsc_to_enc_id[i] = enc->base.id;
> +
> +	return 0;
> +}
> +
>   static int _dpu_rm_make_reservation(
>   		struct dpu_rm *rm,
>   		struct dpu_global_state *global_state,
> @@ -526,6 +581,10 @@ static int _dpu_rm_make_reservation(
>   	if (ret)
>   		return ret;
>   
> +	ret  = _dpu_rm_reserve_dsc(rm, global_state, enc, &reqs->topology);
> +	if (ret)
> +		return ret;
> +
>   	return ret;
>   }
>   
> @@ -567,6 +626,8 @@ void dpu_rm_release(struct dpu_global_state *global_state,
>   		ARRAY_SIZE(global_state->ctl_to_enc_id), enc->base.id);
>   	_dpu_rm_clear_mapping(global_state->intf_to_enc_id,
>   		ARRAY_SIZE(global_state->intf_to_enc_id), enc->base.id);
> +	_dpu_rm_clear_mapping(global_state->dsc_to_enc_id,
> +		ARRAY_SIZE(global_state->dsc_to_enc_id), enc->base.id);
>   }
>   
>   int dpu_rm_reserve(
> @@ -640,6 +701,11 @@ int dpu_rm_get_assigned_resources(struct dpu_rm *rm,
>   		hw_to_enc_id = global_state->dspp_to_enc_id;
>   		max_blks = ARRAY_SIZE(rm->dspp_blks);
>   		break;
> +	case DPU_HW_BLK_DSC:
> +		hw_blks = rm->dsc_blks;
> +		hw_to_enc_id = global_state->dsc_to_enc_id;
> +		max_blks = ARRAY_SIZE(rm->dsc_blks);
> +		break;
>   	default:
>   		DPU_ERROR("blk type %d not managed by rm\n", type);
>   		return 0;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> index 1f12c8d5b8aa..278d2a510b80 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> @@ -30,6 +30,7 @@ struct dpu_rm {
>   	struct dpu_hw_blk *intf_blks[INTF_MAX - INTF_0];
>   	struct dpu_hw_blk *dspp_blks[DSPP_MAX - DSPP_0];
>   	struct dpu_hw_blk *merge_3d_blks[MERGE_3D_MAX - MERGE_3D_0];
> +	struct dpu_hw_blk *dsc_blks[DSC_MAX - DSC_0];
>   
>   	uint32_t lm_max_width;
>   };
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2021-11-16  6:22 ` [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
  2021-11-18 21:47   ` kernel test robot
@ 2021-11-24 16:21   ` Dmitry Baryshkov
  2021-11-24 16:27     ` Dmitry Baryshkov
  2021-12-11  0:03   ` Marijn Suijten
  2 siblings, 1 reply; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 16:21 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> When DSC is enabled, we need to configure DSI registers accordingly and
> configure the respective stream compression registers.
> 
> Add support to calculate the register setting based on DSC params and
> timing information and configure these registers.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 +++
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 113 ++++++++++++++++++++++++++++-
>   2 files changed, 122 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
> index 49b551ad1bff..c1c85df58c4b 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
> +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
> @@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val)
>   #define REG_DSI_CPHY_MODE_CTRL					0x000002d4
>   
>   
> +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL			0x0000029c
> +
> +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2			0x000002a0
> +
> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL			0x000002a4
> +
> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2			0x000002a8
> +
> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3			0x000002ac
> +
>   #endif /* DSI_XML */
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 31d385d8d834..2c14c36f0b3d 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -908,6 +908,20 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
>   		dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0));
>   }
>   
> +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> +				  int pic_width, int pic_height)
> +{
> +	if (!dsc || !pic_width || !pic_height) {
> +		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
> +		return -EINVAL;
> +	}
> +
> +	dsc->drm->pic_width = pic_width;
> +	dsc->drm->pic_height = pic_height;
> +
> +	return 0;
> +}
> +
>   static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   {
>   	struct drm_display_mode *mode = msm_host->mode;
> @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   		hdisplay /= 2;
>   	}
>   
> +	if (msm_host->dsc) {
> +		struct msm_display_dsc_config *dsc = msm_host->dsc;
> +
> +		/* update dsc params with timing params */
> +		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
> +		DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
> +
> +		/* we do the calculations for dsc parameters here so that
> +		 * panel can use these parameters
> +		 */
> +		dsi_populate_dsc_params(dsc);
> +
> +		/* Divide the display by 3 but keep back/font porch and
> +		 * pulse width same
> +		 */
> +		h_total -= hdisplay;
> +		hdisplay /= 3;
> +		h_total += hdisplay;
> +		ha_end = ha_start + hdisplay;
> +	}
> +
>   	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> +		if (msm_host->dsc) {
> +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> +			u32 reg, intf_width, slice_per_intf;
> +			u32 total_bytes_per_intf;
> +
> +			/* first calculate dsc parameters and then program
> +			 * compress mode registers
> +			 */
> +			intf_width = hdisplay;
> +			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
> +
> +			dsc->drm->slice_count = 1;
> +			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
> +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> +
> +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> +			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
> +			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
> +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> +
> +			reg = dsc->bytes_per_pkt << 16;
> +			reg |= (0x0b << 8);    /* dtype of compressed image */
> +
> +			/* pkt_per_line:
> +			 * 0 == 1 pkt
> +			 * 1 == 2 pkt
> +			 * 2 == 4 pkt
> +			 * 3 pkt is not supported
> +			 * above translates to ffs() - 1
> +			 */
> +			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
> +
> +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> +			reg |= dsc->eol_byte_num << 4;
> +			reg |= 1;
> +
> +			dsi_write(msm_host,
> +				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
> +		}
> +
>   		dsi_write(msm_host, REG_DSI_ACTIVE_H,
>   			DSI_ACTIVE_H_START(ha_start) |
>   			DSI_ACTIVE_H_END(ha_end));
> @@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
>   			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
>   	} else {		/* command mode */
> +		if (msm_host->dsc) {
> +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> +			u32 reg, reg_ctrl, reg_ctrl2;
> +			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
> +
> +			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
> +			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
> +
> +			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
> +			bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
> +						      dsc->drm->bits_per_pixel, 8);
> +			dsc->drm->slice_chunk_size = bytes_in_slice;
> +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> +
> +			reg = 0x39 << 8;
> +			reg |= ffs(dsc->pkt_per_line) << 6;
> +
> +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> +			reg |= dsc->eol_byte_num << 4;
> +			reg |= 1;
> +
> +			reg_ctrl |= reg;
> +			reg_ctrl2 |= bytes_in_slice;
> +
> +			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
> +			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
> +		}
> +
>   		/* image data and 1 byte write_memory_start cmd */
> -		wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
> +		if (!msm_host->dsc)
> +			wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
> +		else
> +			wc = mode->hdisplay / 2 + 1;
>   
>   		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
>   			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
> @@ -2051,9 +2158,13 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
>   {
>   	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>   	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
> +	struct msm_drm_private *priv;
>   	int ret;
>   
>   	msm_host->dev = dev;
> +	priv = dev->dev_private;
> +	priv->dsc = msm_host->dsc;

I have been thinking about this piece. I highly dislike the priv->dsc 
field for multiple reasons.

Please correct me if I'm wrong, we use it for several reasons:
- to check if DSC is requested at all
- to store the dsc_mask

The DSC mask should be calculated basing on dpu_encoder_virt->hw_dsc[] 
values, so it can be removed from msm_display_dsc_config.

To check whether DSC is enabled, I'd suggest the following:

- Add use_dsc flag to struct msm_display_info.
   This way it would be generic to all possible encoders which can use DSC.

- Add struct msm_dsi_has_dsc_panel() function.
   It checks whether msm_host has ->dsc data. Feel free to change the 
name of the function to better suit your style.

- Call msm_dsi_has_dsc_panel() from _dpu_kms_initialize_dsi().
   If DSC is requested, set info->use_dsc.

- In dpu_encoder_setup store use_dsc in struct dpu_encoder_virt() and 
use it later instead of checking priv->dsc.

WDYT?


> +
>   	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
>   	if (ret) {
>   		pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2021-11-24 16:21   ` Dmitry Baryshkov
@ 2021-11-24 16:27     ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 16:27 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 24/11/2021 19:21, Dmitry Baryshkov wrote:
> On 16/11/2021 09:22, Vinod Koul wrote:
>> When DSC is enabled, we need to configure DSI registers accordingly and
>> configure the respective stream compression registers.
>>
>> Add support to calculate the register setting based on DSC params and
>> timing information and configure these registers.
>>
>> Signed-off-by: Vinod Koul <vkoul@kernel.org>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 +++
>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 113 ++++++++++++++++++++++++++++-
>>   2 files changed, 122 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h 
>> b/drivers/gpu/drm/msm/dsi/dsi.xml.h
>> index 49b551ad1bff..c1c85df58c4b 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
>> +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
>> @@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t 
>> val)
>>   #define REG_DSI_CPHY_MODE_CTRL                    0x000002d4
>> +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL            0x0000029c
>> +
>> +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2            0x000002a0
>> +
>> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL            0x000002a4
>> +
>> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2            0x000002a8
>> +
>> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3            0x000002ac
>> +
>>   #endif /* DSI_XML */
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c 
>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 31d385d8d834..2c14c36f0b3d 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -908,6 +908,20 @@ static void dsi_ctrl_config(struct msm_dsi_host 
>> *msm_host, bool enable,
>>           dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0));
>>   }
>> +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
>> +                  int pic_width, int pic_height)
>> +{
>> +    if (!dsc || !pic_width || !pic_height) {
>> +        pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", 
>> pic_width, pic_height);
>> +        return -EINVAL;
>> +    }
>> +
>> +    dsc->drm->pic_width = pic_width;
>> +    dsc->drm->pic_height = pic_height;
>> +
>> +    return 0;
>> +}
>> +
>>   static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool 
>> is_bonded_dsi)
>>   {
>>       struct drm_display_mode *mode = msm_host->mode;
>> @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host 
>> *msm_host, bool is_bonded_dsi)
>>           hdisplay /= 2;
>>       }
>> +    if (msm_host->dsc) {
>> +        struct msm_display_dsc_config *dsc = msm_host->dsc;
>> +
>> +        /* update dsc params with timing params */
>> +        dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
>> +        DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, 
>> dsc->drm->pic_height);
>> +
>> +        /* we do the calculations for dsc parameters here so that
>> +         * panel can use these parameters
>> +         */
>> +        dsi_populate_dsc_params(dsc);
>> +
>> +        /* Divide the display by 3 but keep back/font porch and
>> +         * pulse width same
>> +         */
>> +        h_total -= hdisplay;
>> +        hdisplay /= 3;
>> +        h_total += hdisplay;
>> +        ha_end = ha_start + hdisplay;
>> +    }
>> +
>>       if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
>> +        if (msm_host->dsc) {
>> +            struct msm_display_dsc_config *dsc = msm_host->dsc;
>> +            u32 reg, intf_width, slice_per_intf;
>> +            u32 total_bytes_per_intf;
>> +
>> +            /* first calculate dsc parameters and then program
>> +             * compress mode registers
>> +             */
>> +            intf_width = hdisplay;
>> +            slice_per_intf = DIV_ROUND_UP(intf_width, 
>> dsc->drm->slice_width);
>> +
>> +            dsc->drm->slice_count = 1;
>> +            dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width 
>> * 8, 8);
>> +            total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
>> +
>> +            dsc->eol_byte_num = total_bytes_per_intf % 3;
>> +            dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
>> +            dsc->bytes_per_pkt = dsc->bytes_in_slice * 
>> dsc->drm->slice_count;
>> +            dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
>> +
>> +            reg = dsc->bytes_per_pkt << 16;
>> +            reg |= (0x0b << 8);    /* dtype of compressed image */
>> +
>> +            /* pkt_per_line:
>> +             * 0 == 1 pkt
>> +             * 1 == 2 pkt
>> +             * 2 == 4 pkt
>> +             * 3 pkt is not supported
>> +             * above translates to ffs() - 1
>> +             */
>> +            reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
>> +
>> +            dsc->eol_byte_num = total_bytes_per_intf % 3;
>> +            reg |= dsc->eol_byte_num << 4;
>> +            reg |= 1;
>> +
>> +            dsi_write(msm_host,
>> +                  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
>> +        }
>> +
>>           dsi_write(msm_host, REG_DSI_ACTIVE_H,
>>               DSI_ACTIVE_H_START(ha_start) |
>>               DSI_ACTIVE_H_END(ha_end));
>> @@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host 
>> *msm_host, bool is_bonded_dsi)
>>               DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
>>               DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
>>       } else {        /* command mode */
>> +        if (msm_host->dsc) {
>> +            struct msm_display_dsc_config *dsc = msm_host->dsc;
>> +            u32 reg, reg_ctrl, reg_ctrl2;
>> +            u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
>> +
>> +            reg_ctrl = dsi_read(msm_host, 
>> REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
>> +            reg_ctrl2 = dsi_read(msm_host, 
>> REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
>> +
>> +            slice_per_intf = DIV_ROUND_UP(hdisplay, 
>> dsc->drm->slice_width);
>> +            bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
>> +                              dsc->drm->bits_per_pixel, 8);
>> +            dsc->drm->slice_chunk_size = bytes_in_slice;
>> +            total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
>> +            dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
>> +
>> +            reg = 0x39 << 8;
>> +            reg |= ffs(dsc->pkt_per_line) << 6;
>> +
>> +            dsc->eol_byte_num = total_bytes_per_intf % 3;
>> +            reg |= dsc->eol_byte_num << 4;
>> +            reg |= 1;
>> +
>> +            reg_ctrl |= reg;
>> +            reg_ctrl2 |= bytes_in_slice;
>> +
>> +            dsi_write(msm_host, 
>> REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
>> +            dsi_write(msm_host, 
>> REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
>> +        }
>> +
>>           /* image data and 1 byte write_memory_start cmd */
>> -        wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
>> +        if (!msm_host->dsc)
>> +            wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
>> +        else
>> +            wc = mode->hdisplay / 2 + 1;
>>           dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
>>               DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
>> @@ -2051,9 +2158,13 @@ int msm_dsi_host_modeset_init(struct 
>> mipi_dsi_host *host,
>>   {
>>       struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>>       const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
>> +    struct msm_drm_private *priv;
>>       int ret;
>>       msm_host->dev = dev;
>> +    priv = dev->dev_private;
>> +    priv->dsc = msm_host->dsc;
> 
> I have been thinking about this piece. I highly dislike the priv->dsc 
> field for multiple reasons.
> 
> Please correct me if I'm wrong, we use it for several reasons:
> - to check if DSC is requested at all
> - to store the dsc_mask
> 
> The DSC mask should be calculated basing on dpu_encoder_virt->hw_dsc[] 
> values, so it can be removed from msm_display_dsc_config.
> 
> To check whether DSC is enabled, I'd suggest the following:
> 
> - Add use_dsc flag to struct msm_display_info.
>    This way it would be generic to all possible encoders which can use DSC.
> 
> - Add struct msm_dsi_has_dsc_panel() function.
>    It checks whether msm_host has ->dsc data. Feel free to change the 
> name of the function to better suit your style.
> 
> - Call msm_dsi_has_dsc_panel() from _dpu_kms_initialize_dsi().
>    If DSC is requested, set info->use_dsc.
> 
> - In dpu_encoder_setup store use_dsc in struct dpu_encoder_virt() and 
> use it later instead of checking priv->dsc.

I forgot about the patch 2, which actually uses priv->dsc data. The 
overall idea would be the same, get data pointer from msm_dsi and pass 
it through the msm_display_info.

> 
> WDYT?
> 
> 
>> +
>>       ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
>>       if (ret) {
>>           pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);
>>
> 
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel
  2021-11-16  6:22 ` [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
@ 2021-11-24 16:28   ` Dmitry Baryshkov
  2021-11-24 16:51   ` Dmitry Baryshkov
  1 sibling, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 16:28 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> When DSC is enabled, we need to pass the DSC parameters to panel driver
> as well, so add a dsc parameter in panel and set it when DSC is enabled
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 16 +++++++++++++++-
>   include/drm/drm_panel.h            |  7 +++++++
>   2 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 2c14c36f0b3d..3d5773fcf496 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -2159,11 +2159,25 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
>   	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>   	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
>   	struct msm_drm_private *priv;
> +	struct drm_panel *panel;
>   	int ret;
>   
>   	msm_host->dev = dev;
> +	panel = msm_dsi_host_get_panel(&msm_host->base);
>   	priv = dev->dev_private;
> -	priv->dsc = msm_host->dsc;
> +
> +	if (panel && panel->dsc) {
> +		struct msm_display_dsc_config *dsc = priv->dsc;
> +
> +		if (!dsc) {
> +			dsc = kzalloc(sizeof(*dsc), GFP_KERNEL);

devm_kzalloc()?

Or even simpler: embed msm_display_dsc_config into struct msm_dsi_host 
and use it only if dsc->drm is set (IOW the panel provided DSC data)?

> +			if (!dsc)
> +				return -ENOMEM;
> +			dsc->drm = panel->dsc;
> +			priv->dsc = dsc;
> +			msm_host->dsc = dsc;
> +		}
> +	}
>   
>   	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
>   	if (ret) {
> diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> index 4602f833eb51..eb8ae9bf32ed 100644
> --- a/include/drm/drm_panel.h
> +++ b/include/drm/drm_panel.h
> @@ -171,6 +171,13 @@ struct drm_panel {
>   	 * Panel entry in registry.
>   	 */
>   	struct list_head list;
> +
> +	/**
> +	 * @dsc:
> +	 *
> +	 * Panel DSC pps payload to be sent
> +	 */
> +	struct drm_dsc_config *dsc;
>   };
>   
>   void drm_panel_init(struct drm_panel *panel, struct device *dev,
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel
  2021-11-16  6:22 ` [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
  2021-11-24 16:28   ` Dmitry Baryshkov
@ 2021-11-24 16:51   ` Dmitry Baryshkov
  1 sibling, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 16:51 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> When DSC is enabled, we need to pass the DSC parameters to panel driver
> as well, so add a dsc parameter in panel and set it when DSC is enabled

Nit: I think patch description is a bit inaccurate, since we pass DSC 
parameters from panel to DSI host rather than other way around.

> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 16 +++++++++++++++-
>   include/drm/drm_panel.h            |  7 +++++++
>   2 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 2c14c36f0b3d..3d5773fcf496 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -2159,11 +2159,25 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
>   	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>   	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
>   	struct msm_drm_private *priv;
> +	struct drm_panel *panel;
>   	int ret;
>   
>   	msm_host->dev = dev;
> +	panel = msm_dsi_host_get_panel(&msm_host->base);
>   	priv = dev->dev_private;
> -	priv->dsc = msm_host->dsc;
> +
> +	if (panel && panel->dsc) {
> +		struct msm_display_dsc_config *dsc = priv->dsc;
> +
> +		if (!dsc) {
> +			dsc = kzalloc(sizeof(*dsc), GFP_KERNEL);
> +			if (!dsc)
> +				return -ENOMEM;
> +			dsc->drm = panel->dsc;
> +			priv->dsc = dsc;
> +			msm_host->dsc = dsc;
> +		}
> +	}
>   
>   	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
>   	if (ret) {
> diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> index 4602f833eb51..eb8ae9bf32ed 100644
> --- a/include/drm/drm_panel.h
> +++ b/include/drm/drm_panel.h
> @@ -171,6 +171,13 @@ struct drm_panel {
>   	 * Panel entry in registry.
>   	 */
>   	struct list_head list;
> +
> +	/**
> +	 * @dsc:
> +	 *
> +	 * Panel DSC pps payload to be sent
> +	 */
> +	struct drm_dsc_config *dsc;
>   };
>   
>   void drm_panel_init(struct drm_panel *panel, struct device *dev,
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 11/13] drm/msm/dsi: add mode valid callback for dsi_mgr
  2021-11-16  6:22 ` [PATCH v3 11/13] drm/msm/dsi: add mode valid callback for dsi_mgr Vinod Koul
@ 2021-11-24 20:33   ` Dmitry Baryshkov
  0 siblings, 0 replies; 41+ messages in thread
From: Dmitry Baryshkov @ 2021-11-24 20:33 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: linux-arm-msm, Bjorn Andersson, David Airlie, Daniel Vetter,
	Jonathan Marek, Abhinav Kumar, Jeffrey Hugo, Sumit Semwal,
	linux-kernel, dri-devel, freedreno

On 16/11/2021 09:22, Vinod Koul wrote:
> Add a mode valid callback for dsi_mgr for checking mode being valid in
> case of DSC. For DSC the height and width needs to be multiple of slice,
> so we check that here
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   drivers/gpu/drm/msm/dsi/dsi.h         |  2 ++
>   drivers/gpu/drm/msm/dsi/dsi_host.c    | 26 ++++++++++++++++++++++++++
>   drivers/gpu/drm/msm/dsi/dsi_manager.c | 12 ++++++++++++
>   3 files changed, 40 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
> index 569c8ff062ba..e7affab2fc1e 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.h
> +++ b/drivers/gpu/drm/msm/dsi/dsi.h
> @@ -115,6 +115,8 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host,
>   int msm_dsi_host_power_off(struct mipi_dsi_host *host);
>   int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
>   				  const struct drm_display_mode *mode);
> +enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
> +					    const struct drm_display_mode *mode);
>   struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host);
>   unsigned long msm_dsi_host_get_mode_flags(struct mipi_dsi_host *host);
>   struct drm_bridge *msm_dsi_host_get_bridge(struct mipi_dsi_host *host);
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 30c1e299aa52..31d385d8d834 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -2588,6 +2588,32 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
>   	return 0;
>   }
>   
> +enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
> +					    const struct drm_display_mode *mode)
> +{
> +	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
> +	struct msm_display_dsc_config *dsc = msm_host->dsc;
> +	int pic_width = mode->hdisplay;
> +	int pic_height = mode->vdisplay;
> +
> +	if (!msm_host->dsc)
> +		return MODE_OK;
> +
> +	if (pic_width % dsc->drm->slice_width) {
> +		pr_err("DSI: pic_width %d has to be multiple of slice %d\n",
> +		       pic_width, dsc->drm->slice_width);
> +		return MODE_H_ILLEGAL;
> +	}
> +
> +	if (pic_height % dsc->drm->slice_height) {
> +		pr_err("DSI: pic_height %d has to be multiple of slice %d\n",
> +		       pic_height, dsc->drm->slice_height);
> +		return MODE_V_ILLEGAL;
> +	}
> +
> +	return MODE_OK;
> +}
> +
>   struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host)
>   {
>   	return of_drm_find_panel(to_msm_dsi_host(host)->device_node);
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> index 20c4d650fd80..0ad8a53aaa0e 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> @@ -579,6 +579,17 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge,
>   		msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode);
>   }
>   
> +static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
> +						      const struct drm_display_info *info,
> +						      const struct drm_display_mode *mode)
> +{
> +	int id = dsi_mgr_bridge_get_id(bridge);
> +	struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
> +	struct mipi_dsi_host *host = msm_dsi->host;
> +
> +	return msm_dsi_host_check_dsc(host, mode);
> +}
> +
>   static const struct drm_connector_funcs dsi_mgr_connector_funcs = {
>   	.detect = dsi_mgr_connector_detect,
>   	.fill_modes = drm_helper_probe_single_connector_modes,
> @@ -600,6 +611,7 @@ static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = {
>   	.disable = dsi_mgr_bridge_disable,
>   	.post_disable = dsi_mgr_bridge_post_disable,
>   	.mode_set = dsi_mgr_bridge_mode_set,
> +	.mode_valid = dsi_mgr_bridge_mode_valid,
>   };
>   
>   /* initialize connector when we're connected to a drm_panel */
> 


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [Freedreno] [PATCH v3 01/13] drm/msm/dsi: add support for dsc data
  2021-11-16  6:22 ` [PATCH v3 01/13] drm/msm/dsi: add support for dsc data Vinod Koul
  2021-11-24 15:53   ` Dmitry Baryshkov
@ 2021-11-30  1:14   ` Abhinav Kumar
  1 sibling, 0 replies; 41+ messages in thread
From: Abhinav Kumar @ 2021-11-30  1:14 UTC (permalink / raw)
  To: Vinod Koul, Rob Clark
  Cc: Jonathan Marek, Jeffrey Hugo, David Airlie, linux-arm-msm,
	linux-kernel, Abhinav Kumar, Bjorn Andersson, dri-devel,
	Daniel Vetter, Dmitry Baryshkov, freedreno, Sumit Semwal

Hi Vinod

On 11/15/2021 10:22 PM, Vinod Koul wrote:
> Display Stream Compression (DSC) parameters need to be calculated. Add
> helpers and struct msm_display_dsc_config in msm_drv for this
> msm_display_dsc_config uses drm_dsc_config for DSC parameters.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 132 +++++++++++++++++++++++++++++
>   drivers/gpu/drm/msm/msm_drv.h      |  20 +++++
>   2 files changed, 152 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index f69a125f9559..30c1e299aa52 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -31,6 +31,8 @@
>   
>   #define DSI_RESET_TOGGLE_DELAY_MS 20
>   
> +static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc);
> +
>   static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
>   {
>   	u32 ver;
> @@ -157,6 +159,7 @@ struct msm_dsi_host {
>   	struct regmap *sfpb;
>   
>   	struct drm_display_mode *mode;
> +	struct msm_display_dsc_config *dsc;
>   
>   	/* connected device info */
>   	struct device_node *device_node;
> @@ -1710,6 +1713,135 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host,
>   	return -EINVAL;
>   }
>   
> +static u32 dsi_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
> +	0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62,
> +	0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
> +};
> +
> +/* only 8bpc, 8bpp added */
> +static char min_qp[DSC_NUM_BUF_RANGES] = {
> +	0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13
> +};
> +
> +static char max_qp[DSC_NUM_BUF_RANGES] = {
> +	4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15
> +};
> +
> +static char bpg_offset[DSC_NUM_BUF_RANGES] = {
> +	2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12
> +};
> +
> +static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc)
> +{
> +	int mux_words_size;
> +	int groups_per_line, groups_total;
> +	int min_rate_buffer_size;
> +	int hrd_delay;
> +	int pre_num_extra_mux_bits, num_extra_mux_bits;
> +	int slice_bits;
> +	int target_bpp_x16;
> +	int data;
> +	int final_value, final_scale;
> +	int i;
> +
> +	dsc->drm->rc_model_size = 8192;
> +	dsc->drm->first_line_bpg_offset = 12;
> +	dsc->drm->rc_edge_factor = 6;
> +	dsc->drm->rc_tgt_offset_high = 3;
> +	dsc->drm->rc_tgt_offset_low = 3;
> +	dsc->drm->simple_422 = 0;
> +	dsc->drm->convert_rgb = 1;
> +	dsc->drm->vbr_enable = 0;
> +
> +	/* handle only bpp = bpc = 8 */
> +	for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++)
> +		dsc->drm->rc_buf_thresh[i] = dsi_dsc_rc_buf_thresh[i];
> +
> +	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
> +		dsc->drm->rc_range_params[i].range_min_qp = min_qp[i];
> +		dsc->drm->rc_range_params[i].range_max_qp = max_qp[i];
> +		dsc->drm->rc_range_params[i].range_bpg_offset = bpg_offset[i];
> +	}
> +
> +	dsc->drm->initial_offset = 6144; /* Not bpp 12 */
> +	if (dsc->drm->bits_per_pixel != 8)
> +		dsc->drm->initial_offset = 2048;	/* bpp = 12 */
> +
> +	mux_words_size = 48;		/* bpc == 8/10 */
> +	if (dsc->drm->bits_per_component == 12)
> +		mux_words_size = 64;
> +
> +	dsc->drm->initial_xmit_delay = 512;
> +	dsc->drm->initial_scale_value = 32;
> +	dsc->drm->first_line_bpg_offset = 12;
> +	dsc->drm->line_buf_depth = dsc->drm->bits_per_component + 1;
> +
> +	/* bpc 8 */
> +	dsc->drm->flatness_min_qp = 3;
> +	dsc->drm->flatness_max_qp = 12;
> +	dsc->det_thresh_flatness = 7 + 2 * (dsc->drm->bits_per_component - 8);
> +	dsc->drm->rc_quant_incr_limit0 = 11;
> +	dsc->drm->rc_quant_incr_limit1 = 11;
> +	dsc->drm->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
> +
> +	/* FIXME: need to call drm_dsc_compute_rc_parameters() so that rest of
> +	 * params are calculated
> +	 */
since its been a while on this, before moving ahead with a FIXME 
comment, I wanted to know if you had a chance to check what is the 
discrepancy between this and drm_dsc_compute_rc_parameters().

The LOC saved can be quite a bit if we move to
drm_dsc_compute_rc_parameters(). Last time we synced, I think only one 
parameter was mismatching. The code-churn to avoid one mismatch seems a 
lot. If there are more conflicting parameters than one or two, we can go 
ahead with this custom calculation with your FIXME.


> +	dsc->slice_last_group_size = 3 - (dsc->drm->slice_width % 3);
> +	groups_per_line = DIV_ROUND_UP(dsc->drm->slice_width, 3);
> +	dsc->drm->slice_chunk_size = dsc->drm->slice_width * dsc->drm->bits_per_pixel / 8;
> +	if ((dsc->drm->slice_width * dsc->drm->bits_per_pixel) % 8)
> +		dsc->drm->slice_chunk_size++;
> +
> +	/* rbs-min */
> +	min_rate_buffer_size =  dsc->drm->rc_model_size - dsc->drm->initial_offset +
> +				dsc->drm->initial_xmit_delay * dsc->drm->bits_per_pixel +
> +				groups_per_line * dsc->drm->first_line_bpg_offset;
> +
> +	hrd_delay = DIV_ROUND_UP(min_rate_buffer_size, dsc->drm->bits_per_pixel);
> +
> +	dsc->drm->initial_dec_delay = hrd_delay - dsc->drm->initial_xmit_delay;
> +
> +	dsc->drm->initial_scale_value = 8 * dsc->drm->rc_model_size /
> +				       (dsc->drm->rc_model_size - dsc->drm->initial_offset);
> +
> +	slice_bits = 8 * dsc->drm->slice_chunk_size * dsc->drm->slice_height;
> +
> +	groups_total = groups_per_line * dsc->drm->slice_height;
> +
> +	data = dsc->drm->first_line_bpg_offset * 2048;
> +
> +	dsc->drm->nfl_bpg_offset = DIV_ROUND_UP(data, (dsc->drm->slice_height - 1));
> +
> +	pre_num_extra_mux_bits = 3 * (mux_words_size + (4 * dsc->drm->bits_per_component + 4) - 2);
> +
> +	num_extra_mux_bits = pre_num_extra_mux_bits - (mux_words_size -
> +			     ((slice_bits - pre_num_extra_mux_bits) % mux_words_size));
> +
> +	data = 2048 * (dsc->drm->rc_model_size - dsc->drm->initial_offset + num_extra_mux_bits);
> +	dsc->drm->slice_bpg_offset = DIV_ROUND_UP(data, groups_total);
> +
> +	/* bpp * 16 + 0.5 */
> +	data = dsc->drm->bits_per_pixel * 16;
> +	data *= 2;
> +	data++;
> +	data /= 2;
> +	target_bpp_x16 = data;
> +
> +	data = (dsc->drm->initial_xmit_delay * target_bpp_x16) / 16;
> +	final_value =  dsc->drm->rc_model_size - data + num_extra_mux_bits;
> +	dsc->drm->final_offset = final_value;
> +
> +	final_scale = 8 * dsc->drm->rc_model_size / (dsc->drm->rc_model_size - final_value);
> +
> +	data = (final_scale - 9) * (dsc->drm->nfl_bpg_offset + dsc->drm->slice_bpg_offset);
> +	dsc->drm->scale_increment_interval = (2048 * dsc->drm->final_offset) / data;
> +
> +	dsc->drm->scale_decrement_interval = groups_per_line / (dsc->drm->initial_scale_value - 8);
> +
> +	return 0;
> +}
> +
>   static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
>   {
>   	struct device *dev = &msm_host->pdev->dev;
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index 69952b239384..de7cb65bfc52 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -30,6 +30,7 @@
>   #include <drm/drm_plane_helper.h>
>   #include <drm/drm_probe_helper.h>
>   #include <drm/drm_fb_helper.h>
> +#include <drm/drm_dsc.h>
>   #include <drm/msm_drm.h>
>   #include <drm/drm_gem.h>
>   
> @@ -134,6 +135,22 @@ struct msm_drm_thread {
>   	struct kthread_worker *worker;
>   };
>   
> +/* DSC config */
> +struct msm_display_dsc_config {
> +	struct drm_dsc_config *drm;
> +
> +	u32 initial_lines;
> +	u32 pkt_per_line;
> +	u32 bytes_in_slice;
> +	u32 bytes_per_pkt;
> +	u32 eol_byte_num;
> +	u32 pclk_per_line;
> +	u32 slice_last_group_size;
> +	u32 det_thresh_flatness;
> +
> +	unsigned int dsc_mask;
> +};
> +
>   struct msm_drm_private {
>   
>   	struct drm_device *dev;
> @@ -228,6 +245,9 @@ struct msm_drm_private {
>   	/* Properties */
>   	struct drm_property *plane_property[PLANE_PROP_MAX_NUM];
>   
> +	/* DSC configuration */
> +	struct msm_display_dsc_config *dsc;
I agree with Dmitry, that we need a closer binding of dsc_config with 
which display its getting associated with. Having it in the private 
object is too generic.

https://patchwork.freedesktop.org/patch/463255/?series=90413&rev=4

How about moving this to struct dpu_encoder_virt.
That way, it will be associated with the correct encoder.

Yes, I dont see the usage for dsc_mask too.

> +
>   	/* VRAM carveout, used when no IOMMU: */
>   	struct {
>   		unsigned long size;
> 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2021-11-16  6:22 ` [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
  2021-11-18 21:47   ` kernel test robot
  2021-11-24 16:21   ` Dmitry Baryshkov
@ 2021-12-11  0:03   ` Marijn Suijten
  2022-02-17 11:14     ` [Freedreno] " Vinod Koul
  2 siblings, 1 reply; 41+ messages in thread
From: Marijn Suijten @ 2021-12-11  0:03 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Rob Clark, linux-arm-msm, Bjorn Andersson, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno,
	Konrad Dybcio

Hi Vinod,

On 2021-11-16 11:52:55, Vinod Koul wrote:
> When DSC is enabled, we need to configure DSI registers accordingly and
> configure the respective stream compression registers.
> 
> Add support to calculate the register setting based on DSC params and
> timing information and configure these registers.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 +++
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 113 ++++++++++++++++++++++++++++-
>  2 files changed, 122 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
> index 49b551ad1bff..c1c85df58c4b 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
> +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
> @@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val)
>  #define REG_DSI_CPHY_MODE_CTRL					0x000002d4
>  
>  
> +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL			0x0000029c
> +
> +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2			0x000002a0
> +
> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL			0x000002a4
> +
> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2			0x000002a8
> +
> +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3			0x000002ac

I presume you are aware that these files are autogenerated, but there
does not seem to be any link to patches adding these registers to the
XML files in either envytools to mesa, nor could I find any merge/pull
requests on the matter.  Would you mind posting those?  Before doing so
though, consider the comment below about register mapping.

> +
>  #endif /* DSI_XML */
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 31d385d8d834..2c14c36f0b3d 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -908,6 +908,20 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
>  		dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0));
>  }
>  
> +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> +				  int pic_width, int pic_height)

This function - adopted from downstream - does not seem to perform a
whole lot, especially without the modulo checks against the slice size.
Perhaps it can be inlined?

> +{
> +	if (!dsc || !pic_width || !pic_height) {
> +		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
> +		return -EINVAL;
> +	}
> +
> +	dsc->drm->pic_width = pic_width;
> +	dsc->drm->pic_height = pic_height;
> +
> +	return 0;
> +}
> +
>  static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>  {
>  	struct drm_display_mode *mode = msm_host->mode;
> @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>  		hdisplay /= 2;
>  	}
>  
> +	if (msm_host->dsc) {
> +		struct msm_display_dsc_config *dsc = msm_host->dsc;
> +
> +		/* update dsc params with timing params */
> +		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
> +		DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);

This seems to be pretty non-standard and perhaps unnecessary debug code,
with a stray dash in there.  Is is needed here, and if so how about
using %dx%d\n to format width and height?

> +
> +		/* we do the calculations for dsc parameters here so that
> +		 * panel can use these parameters
> +		 */
> +		dsi_populate_dsc_params(dsc);
> +
> +		/* Divide the display by 3 but keep back/font porch and
> +		 * pulse width same
> +		 */

A more general nit on the comments in this patch series: it is
appreciated if comments explain the rationale rather than - or in
addition to - merely paraphrasing the code that follows.

> +		h_total -= hdisplay;
> +		hdisplay /= 3;
> +		h_total += hdisplay;
> +		ha_end = ha_start + hdisplay;
> +	}
> +
>  	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> +		if (msm_host->dsc) {
> +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> +			u32 reg, intf_width, slice_per_intf;
> +			u32 total_bytes_per_intf;
> +
> +			/* first calculate dsc parameters and then program
> +			 * compress mode registers
> +			 */
> +			intf_width = hdisplay;
> +			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
> +
> +			dsc->drm->slice_count = 1;
> +			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);

If I am not mistaken this is the same value as dsc->drm->slice_width,
since a multiple of 8 is inherently "a multiple of 8" and hence needs no
rounding when divided by 8 again.

Also note that the cmdmode variant below uses bits_per_pixel here; is
that discrepancy intended?

> +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> +
> +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> +			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
> +			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
> +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> +
> +			reg = dsc->bytes_per_pkt << 16;
> +			reg |= (0x0b << 8);    /* dtype of compressed image */
> +
> +			/* pkt_per_line:
> +			 * 0 == 1 pkt
> +			 * 1 == 2 pkt
> +			 * 2 == 4 pkt
> +			 * 3 pkt is not supported
> +			 * above translates to ffs() - 1
> +			 */
> +			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
> +
> +			dsc->eol_byte_num = total_bytes_per_intf % 3;

This was already calculated and assigned just a couple lines above.

> +			reg |= dsc->eol_byte_num << 4;
> +			reg |= 1;

Note that the XML register file exists to map out the layout of these
registers, including bit offset, size, and (enum) constant values.  It
is appreciated if you can replace all these magical shifts and magic
flags/bits with the appropriate enum constants and constructor
functions, after mapping them out in the XML file.

> +
> +			dsi_write(msm_host,
> +				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
> +		}
> +
>  		dsi_write(msm_host, REG_DSI_ACTIVE_H,
>  			DSI_ACTIVE_H_START(ha_start) |
>  			DSI_ACTIVE_H_END(ha_end));
> @@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>  			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
>  			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
>  	} else {		/* command mode */
> +		if (msm_host->dsc) {
> +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> +			u32 reg, reg_ctrl, reg_ctrl2;
> +			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
> +
> +			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
> +			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);

Shouldn't old values be masked out first, before writing new bits or
values below?  The video-mode variant doesn't read back old register
values.

> +
> +			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
> +			bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
> +						      dsc->drm->bits_per_pixel, 8);
> +			dsc->drm->slice_chunk_size = bytes_in_slice;
> +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> +
> +			reg = 0x39 << 8;

Same comment about moving magic constants and shifts into the XML file.

> +			reg |= ffs(dsc->pkt_per_line) << 6;

Doesn't the calculation need -1 here just like video mode?

Thanks!

- Marijn

> +
> +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> +			reg |= dsc->eol_byte_num << 4;
> +			reg |= 1;
> +
> +			reg_ctrl |= reg;
> +			reg_ctrl2 |= bytes_in_slice;
> +
> +			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
> +			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
> +		}
> +
>  		/* image data and 1 byte write_memory_start cmd */
> -		wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
> +		if (!msm_host->dsc)
> +			wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
> +		else
> +			wc = mode->hdisplay / 2 + 1;
>  
>  		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
>  			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
> @@ -2051,9 +2158,13 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
>  {
>  	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>  	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
> +	struct msm_drm_private *priv;
>  	int ret;
>  
>  	msm_host->dev = dev;
> +	priv = dev->dev_private;
> +	priv->dsc = msm_host->dsc;
> +
>  	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
>  	if (ret) {
>  		pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [Freedreno] [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2021-12-11  0:03   ` Marijn Suijten
@ 2022-02-17 11:14     ` Vinod Koul
  2022-02-17 15:11       ` Marijn Suijten
  0 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2022-02-17 11:14 UTC (permalink / raw)
  To: Marijn Suijten
  Cc: Jonathan Marek, Jeffrey Hugo, David Airlie, linux-arm-msm,
	Konrad Dybcio, linux-kernel, Abhinav Kumar, Bjorn Andersson,
	Rob Clark, dri-devel, Daniel Vetter, Dmitry Baryshkov, freedreno,
	Sumit Semwal

Hi Marijn,

On 11-12-21, 01:03, Marijn Suijten wrote:

> > +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> > +				  int pic_width, int pic_height)
> 
> This function - adopted from downstream - does not seem to perform a
> whole lot, especially without the modulo checks against the slice size.
> Perhaps it can be inlined?

Most of the code here is :)

This was split from downstream code to check and update dimension. We
can inline this, or should we leave that to compiler. I am not a very
big fan of inlining...

> 
> > +{
> > +	if (!dsc || !pic_width || !pic_height) {
> > +		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
> > +		return -EINVAL;
> > +	}
> > +
> > +	dsc->drm->pic_width = pic_width;
> > +	dsc->drm->pic_height = pic_height;
> > +
> > +	return 0;
> > +}
> > +
> >  static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> >  {
> >  	struct drm_display_mode *mode = msm_host->mode;
> > @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> >  		hdisplay /= 2;
> >  	}
> >  
> > +	if (msm_host->dsc) {
> > +		struct msm_display_dsc_config *dsc = msm_host->dsc;
> > +
> > +		/* update dsc params with timing params */
> > +		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
> > +		DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
> 
> This seems to be pretty non-standard and perhaps unnecessary debug code,
> with a stray dash in there.  Is is needed here, and if so how about
> using %dx%d\n to format width and height?

I can update that, sure...

> 
> > +
> > +		/* we do the calculations for dsc parameters here so that
> > +		 * panel can use these parameters
> > +		 */
> > +		dsi_populate_dsc_params(dsc);
> > +
> > +		/* Divide the display by 3 but keep back/font porch and
> > +		 * pulse width same
> > +		 */
> 
> A more general nit on the comments in this patch series: it is
> appreciated if comments explain the rationale rather than - or in
> addition to - merely paraphrasing the code that follows.

Yes it might be the case here, but in this case I wanted to explicitly
point out hat we need to divide display by 3...

> 
> > +		h_total -= hdisplay;
> > +		hdisplay /= 3;
> > +		h_total += hdisplay;
> > +		ha_end = ha_start + hdisplay;
> > +	}
> > +
> >  	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> > +		if (msm_host->dsc) {
> > +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> > +			u32 reg, intf_width, slice_per_intf;
> > +			u32 total_bytes_per_intf;
> > +
> > +			/* first calculate dsc parameters and then program
> > +			 * compress mode registers
> > +			 */
> > +			intf_width = hdisplay;
> > +			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
> > +
> > +			dsc->drm->slice_count = 1;
> > +			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
> 
> If I am not mistaken this is the same value as dsc->drm->slice_width,
> since a multiple of 8 is inherently "a multiple of 8" and hence needs no
> rounding when divided by 8 again.

Yes this doesnt look right, I will update

> Also note that the cmdmode variant below uses bits_per_pixel here; is
> that discrepancy intended?

Nope both should use bits_per_pixel..

> > +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> > +
> > +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> > +			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
> > +			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
> > +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> > +
> > +			reg = dsc->bytes_per_pkt << 16;
> > +			reg |= (0x0b << 8);    /* dtype of compressed image */
> > +
> > +			/* pkt_per_line:
> > +			 * 0 == 1 pkt
> > +			 * 1 == 2 pkt
> > +			 * 2 == 4 pkt
> > +			 * 3 pkt is not supported
> > +			 * above translates to ffs() - 1
> > +			 */
> > +			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
> > +
> > +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> 
> This was already calculated and assigned just a couple lines above.

Yup, dropped now.

> 
> > +			reg |= dsc->eol_byte_num << 4;
> > +			reg |= 1;
> 
> Note that the XML register file exists to map out the layout of these
> registers, including bit offset, size, and (enum) constant values.  It
> is appreciated if you can replace all these magical shifts and magic
> flags/bits with the appropriate enum constants and constructor
> functions, after mapping them out in the XML file.

Yeah I am trying to get those details, if I manage to get it, will
update for sure as Dmitry already pointed in MESA PR.

> > +
> > +			dsi_write(msm_host,
> > +				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
> > +		}
> > +
> >  		dsi_write(msm_host, REG_DSI_ACTIVE_H,
> >  			DSI_ACTIVE_H_START(ha_start) |
> >  			DSI_ACTIVE_H_END(ha_end));
> > @@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> >  			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
> >  			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
> >  	} else {		/* command mode */
> > +		if (msm_host->dsc) {
> > +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> > +			u32 reg, reg_ctrl, reg_ctrl2;
> > +			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
> > +
> > +			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
> > +			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
> 
> Shouldn't old values be masked out first, before writing new bits or
> values below?  The video-mode variant doesn't read back old register
> values.

This follows downstream where the registers are read, modified and
written back

> > +
> > +			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
> > +			bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
> > +						      dsc->drm->bits_per_pixel, 8);
> > +			dsc->drm->slice_chunk_size = bytes_in_slice;
> > +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> > +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> > +
> > +			reg = 0x39 << 8;
> 
> Same comment about moving magic constants and shifts into the XML file.

yes if we get details of bits

> 
> > +			reg |= ffs(dsc->pkt_per_line) << 6;
> 
> Doesn't the calculation need -1 here just like video mode?

yes will update now

-- 
~Vinod

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [Freedreno] [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2022-02-17 11:14     ` [Freedreno] " Vinod Koul
@ 2022-02-17 15:11       ` Marijn Suijten
  2022-03-22 17:16         ` Vinod Koul
  0 siblings, 1 reply; 41+ messages in thread
From: Marijn Suijten @ 2022-02-17 15:11 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Jonathan Marek, Jeffrey Hugo, David Airlie, linux-arm-msm,
	Konrad Dybcio, linux-kernel, Abhinav Kumar, Bjorn Andersson,
	Rob Clark, dri-devel, Daniel Vetter, Dmitry Baryshkov, freedreno,
	Sumit Semwal

Hi Vinod,

Thanks for taking time to go through this review, please find some
clarifications below.

On 2022-02-17 16:44:04, Vinod Koul wrote:
> Hi Marijn,
> 
> On 11-12-21, 01:03, Marijn Suijten wrote:
> 
> > > +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> > > +				  int pic_width, int pic_height)
> > 
> > This function - adopted from downstream - does not seem to perform a
> > whole lot, especially without the modulo checks against the slice size.
> > Perhaps it can be inlined?
> 
> Most of the code here is :)
> 
> This was split from downstream code to check and update dimension. We
> can inline this, or should we leave that to compiler. I am not a very
> big fan of inlining...

It doesn't seem beneficial to code readability to have this function,
which is only called just once and also has the same struct members read
in a `DBG()` directly, abstracted away to a function.  Not really
concerned about generated code/performance FWIW.

Also note that the caller isn't checking the `-EINVAL` result...

> > 
> > > +{
> > > +	if (!dsc || !pic_width || !pic_height) {
> > > +		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > +	dsc->drm->pic_width = pic_width;
> > > +	dsc->drm->pic_height = pic_height;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >  static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > >  {
> > >  	struct drm_display_mode *mode = msm_host->mode;
> > > @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > >  		hdisplay /= 2;
> > >  	}
> > >  
> > > +	if (msm_host->dsc) {
> > > +		struct msm_display_dsc_config *dsc = msm_host->dsc;
> > > +
> > > +		/* update dsc params with timing params */
> > > +		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);

That is, the result code here should be checked (or function inlined).

> > > +		DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
> > 
> > This seems to be pretty non-standard and perhaps unnecessary debug code,
> > with a stray dash in there.  Is is needed here, and if so how about
> > using %dx%d\n to format width and height?
> 
> I can update that, sure...
> 
> > 
> > > +
> > > +		/* we do the calculations for dsc parameters here so that
> > > +		 * panel can use these parameters
> > > +		 */
> > > +		dsi_populate_dsc_params(dsc);
> > > +
> > > +		/* Divide the display by 3 but keep back/font porch and
> > > +		 * pulse width same
> > > +		 */
> > 
> > A more general nit on the comments in this patch series: it is
> > appreciated if comments explain the rationale rather than - or in
> > addition to - merely paraphrasing the code that follows.
> 
> Yes it might be the case here, but in this case I wanted to explicitly
> point out hat we need to divide display by 3...

The main point here is justifying _why_ there's a division by 3 for the
active portion of the signal, I presume that's the compression ratio
(having not read into the DSC compression standard yet at all)?

> > 
> > > +		h_total -= hdisplay;
> > > +		hdisplay /= 3;
> > > +		h_total += hdisplay;
> > > +		ha_end = ha_start + hdisplay;
> > > +	}
> > > +
> > >  	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> > > +		if (msm_host->dsc) {
> > > +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> > > +			u32 reg, intf_width, slice_per_intf;
> > > +			u32 total_bytes_per_intf;
> > > +
> > > +			/* first calculate dsc parameters and then program
> > > +			 * compress mode registers
> > > +			 */
> > > +			intf_width = hdisplay;
> > > +			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
> > > +
> > > +			dsc->drm->slice_count = 1;
> > > +			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
> > 
> > If I am not mistaken this is the same value as dsc->drm->slice_width,
> > since a multiple of 8 is inherently "a multiple of 8" and hence needs no
> > rounding when divided by 8 again.
> 
> Yes this doesnt look right, I will update
> 
> > Also note that the cmdmode variant below uses bits_per_pixel here; is
> > that discrepancy intended?
> 
> Nope both should use bits_per_pixel..
> 
> > > +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> > > +
> > > +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> > > +			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
> > > +			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
> > > +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> > > +
> > > +			reg = dsc->bytes_per_pkt << 16;
> > > +			reg |= (0x0b << 8);    /* dtype of compressed image */
> > > +
> > > +			/* pkt_per_line:
> > > +			 * 0 == 1 pkt
> > > +			 * 1 == 2 pkt
> > > +			 * 2 == 4 pkt
> > > +			 * 3 pkt is not supported
> > > +			 * above translates to ffs() - 1
> > > +			 */
> > > +			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
> > > +
> > > +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> > 
> > This was already calculated and assigned just a couple lines above.
> 
> Yup, dropped now.
> 
> > 
> > > +			reg |= dsc->eol_byte_num << 4;
> > > +			reg |= 1;
> > 
> > Note that the XML register file exists to map out the layout of these
> > registers, including bit offset, size, and (enum) constant values.  It
> > is appreciated if you can replace all these magical shifts and magic
> > flags/bits with the appropriate enum constants and constructor
> > functions, after mapping them out in the XML file.
> 
> Yeah I am trying to get those details, if I manage to get it, will
> update for sure as Dmitry already pointed in MESA PR.

That'd be lovely.  In any case, even if you can't get the meaning for
all these bits, offsets and constants, it's still desired to at least
add them to the XML as "unknown" or something (including offset in the
name).  Then perhaps the details can be filled in over time while
keeping the driver free of magic constants.  See for example how some of
the Adreno register XML descriptions set this up.

For example, without those details we can already state that
`eol_byte_num` has an offset of 4 in the MODE_CTL register, and probably
a size of 2 bits since its value is always modulo 3.  Likewise
pkt_per_line can be turned into an `<enum>` and so on for the other
segments that build up this register.  Let me know in the mesa MR if you
need assistance/suggestions for mapping out the registers in XML.

> > > +
> > > +			dsi_write(msm_host,
> > > +				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
> > > +		}
> > > +
> > >  		dsi_write(msm_host, REG_DSI_ACTIVE_H,
> > >  			DSI_ACTIVE_H_START(ha_start) |
> > >  			DSI_ACTIVE_H_END(ha_end));
> > > @@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > >  			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
> > >  			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
> > >  	} else {		/* command mode */
> > > +		if (msm_host->dsc) {
> > > +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> > > +			u32 reg, reg_ctrl, reg_ctrl2;
> > > +			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
> > > +
> > > +			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
> > > +			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
> > 
> > Shouldn't old values be masked out first, before writing new bits or
> > values below?  The video-mode variant doesn't read back old register
> > values.
> 
> This follows downstream where the registers are read, modified and
> written back

Are you sure about this?  The register values are never cleared, meaning
that only bits get added through the `|=` below but never unset - unless
downstream clears these registers elsewhere before ending up in (their
equivalent of) dsi_timing_setup.

> > > +
> > > +			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
> > > +			bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
> > > +						      dsc->drm->bits_per_pixel, 8);
> > > +			dsc->drm->slice_chunk_size = bytes_in_slice;
> > > +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> > > +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> > > +
> > > +			reg = 0x39 << 8;
> > 
> > Same comment about moving magic constants and shifts into the XML file.
> 
> yes if we get details of bits

As mentioned above, even without those details this constant can be
represented in the XML, as belonging to offset `8` of the register.

> > 
> > > +			reg |= ffs(dsc->pkt_per_line) << 6;
> > 
> > Doesn't the calculation need -1 here just like video mode?
> 
> yes will update now

Thanks.  I forgot to mention: there seem to be a lot of similarities
between the video and commandmode computations, can those possibly be
factored out of the if-else to save on duplication and accidental
mismatches like these?

- Marijn

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block
  2021-11-16  6:22 ` [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
@ 2022-02-17 21:54   ` Marijn Suijten
  2022-02-17 22:06     ` Marijn Suijten
  2022-02-17 22:12     ` Dmitry Baryshkov
  0 siblings, 2 replies; 41+ messages in thread
From: Marijn Suijten @ 2022-02-17 21:54 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Rob Clark, linux-arm-msm, Bjorn Andersson, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

On 2021-11-16 11:52:46, Vinod Koul wrote:
> In SDM845, DSC can be enabled by writing to pingpong block registers, so
> add support for DSC in hw_pp

Nit: I don't think the ", so add support for DSC in XXX" part in this
and other commit messages add anything.  You've already stated that in
the title, the commit body is just extra justification (and can perhaps
be filled with extra details about the patch contents instead).

> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 32 +++++++++++++++++++
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++++++
>  2 files changed, 46 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> index 55766c97c4c8..47c6ab6caf95 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> @@ -28,6 +28,9 @@
>  #define PP_FBC_MODE                     0x034
>  #define PP_FBC_BUDGET_CTL               0x038
>  #define PP_FBC_LOSSY_MODE               0x03C
> +#define PP_DSC_MODE                     0x0a0
> +#define PP_DCE_DATA_IN_SWAP             0x0ac

This enum does not seem used here, is it used in another patch?

> +#define PP_DCE_DATA_OUT_SWAP            0x0c8
>  
>  #define PP_DITHER_EN			0x000
>  #define PP_DITHER_BITDEPTH		0x004
> @@ -245,6 +248,32 @@ static u32 dpu_hw_pp_get_line_count(struct dpu_hw_pingpong *pp)
>  	return line;
>  }
>  
> +static int dpu_hw_pp_dsc_enable(struct dpu_hw_pingpong *pp)
> +{
> +	struct dpu_hw_blk_reg_map *c = &pp->hw;
> +
> +	DPU_REG_WRITE(c, PP_DSC_MODE, 1);
> +	return 0;
> +}
> +
> +static void dpu_hw_pp_dsc_disable(struct dpu_hw_pingpong *pp)
> +{
> +	struct dpu_hw_blk_reg_map *c = &pp->hw;
> +
> +	DPU_REG_WRITE(c, PP_DSC_MODE, 0);
> +}
> +
> +static int dpu_hw_pp_setup_dsc(struct dpu_hw_pingpong *pp)
> +{
> +	struct dpu_hw_blk_reg_map *pp_c = &pp->hw;
> +	int data;
> +
> +	data = DPU_REG_READ(pp_c, PP_DCE_DATA_OUT_SWAP);
> +	data |= BIT(18); /* endian flip */
> +	DPU_REG_WRITE(pp_c, PP_DCE_DATA_OUT_SWAP, data);
> +	return 0;
> +}
> +
>  static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
>  				unsigned long features)
>  {
> @@ -256,6 +285,9 @@ static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
>  	c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
>  	c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
>  	c->ops.get_line_count = dpu_hw_pp_get_line_count;
> +	c->ops.setup_dsc = dpu_hw_pp_setup_dsc;
> +	c->ops.enable_dsc = dpu_hw_pp_dsc_enable;
> +	c->ops.disable_dsc = dpu_hw_pp_dsc_disable;
>  
>  	if (test_bit(DPU_PINGPONG_DITHER, &features))
>  		c->ops.setup_dither = dpu_hw_pp_setup_dither;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> index 89d08a715c16..12758468d9ca 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> @@ -124,6 +124,20 @@ struct dpu_hw_pingpong_ops {
>  	 */
>  	void (*setup_dither)(struct dpu_hw_pingpong *pp,
>  			struct dpu_hw_dither_cfg *cfg);
> +	/**
> +	 * Enable DSC
> +	 */
> +	int (*enable_dsc)(struct dpu_hw_pingpong *pp);
> +
> +	/**
> +	 * Disable DSC
> +	 */
> +	void (*disable_dsc)(struct dpu_hw_pingpong *pp);

It looks like most other callbacks in dpu1 use an `enable` function with
a boolean, instead of having a separate disable function.  That should
simplify the implementation down to a single ternary-if, too.  Would
that be desired to use here?

- Marijn

> +
> +	/**
> +	 * Setup DSC
> +	 */
> +	int (*setup_dsc)(struct dpu_hw_pingpong *pp);
>  };
>  
>  struct dpu_hw_merge_3d;
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block
  2022-02-17 21:54   ` Marijn Suijten
@ 2022-02-17 22:06     ` Marijn Suijten
  2022-02-17 22:12     ` Dmitry Baryshkov
  1 sibling, 0 replies; 41+ messages in thread
From: Marijn Suijten @ 2022-02-17 22:06 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Rob Clark, linux-arm-msm, Bjorn Andersson, David Airlie,
	Daniel Vetter, Jonathan Marek, Dmitry Baryshkov, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

Hi Vinod,

I seem to have sent this review to v3 instead of the repost of v4.  It
should still apply the same, hope that's no issue.

- Marijn

On 2022-02-17 22:54:38, Marijn Suijten wrote:
> On 2021-11-16 11:52:46, Vinod Koul wrote:
> > In SDM845, DSC can be enabled by writing to pingpong block registers, so
> > add support for DSC in hw_pp
> 
> Nit: I don't think the ", so add support for DSC in XXX" part in this
> and other commit messages add anything.  You've already stated that in
> the title, the commit body is just extra justification (and can perhaps
> be filled with extra details about the patch contents instead).
> 
> > Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 32 +++++++++++++++++++
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++++++
> >  2 files changed, 46 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> > index 55766c97c4c8..47c6ab6caf95 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> > @@ -28,6 +28,9 @@
> >  #define PP_FBC_MODE                     0x034
> >  #define PP_FBC_BUDGET_CTL               0x038
> >  #define PP_FBC_LOSSY_MODE               0x03C
> > +#define PP_DSC_MODE                     0x0a0
> > +#define PP_DCE_DATA_IN_SWAP             0x0ac
> 
> This enum does not seem used here, is it used in another patch?
> 
> > +#define PP_DCE_DATA_OUT_SWAP            0x0c8
> >  
> >  #define PP_DITHER_EN			0x000
> >  #define PP_DITHER_BITDEPTH		0x004
> > @@ -245,6 +248,32 @@ static u32 dpu_hw_pp_get_line_count(struct dpu_hw_pingpong *pp)
> >  	return line;
> >  }
> >  
> > +static int dpu_hw_pp_dsc_enable(struct dpu_hw_pingpong *pp)
> > +{
> > +	struct dpu_hw_blk_reg_map *c = &pp->hw;
> > +
> > +	DPU_REG_WRITE(c, PP_DSC_MODE, 1);
> > +	return 0;
> > +}
> > +
> > +static void dpu_hw_pp_dsc_disable(struct dpu_hw_pingpong *pp)
> > +{
> > +	struct dpu_hw_blk_reg_map *c = &pp->hw;
> > +
> > +	DPU_REG_WRITE(c, PP_DSC_MODE, 0);
> > +}
> > +
> > +static int dpu_hw_pp_setup_dsc(struct dpu_hw_pingpong *pp)
> > +{
> > +	struct dpu_hw_blk_reg_map *pp_c = &pp->hw;
> > +	int data;
> > +
> > +	data = DPU_REG_READ(pp_c, PP_DCE_DATA_OUT_SWAP);
> > +	data |= BIT(18); /* endian flip */
> > +	DPU_REG_WRITE(pp_c, PP_DCE_DATA_OUT_SWAP, data);
> > +	return 0;
> > +}
> > +
> >  static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
> >  				unsigned long features)
> >  {
> > @@ -256,6 +285,9 @@ static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
> >  	c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
> >  	c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
> >  	c->ops.get_line_count = dpu_hw_pp_get_line_count;
> > +	c->ops.setup_dsc = dpu_hw_pp_setup_dsc;
> > +	c->ops.enable_dsc = dpu_hw_pp_dsc_enable;
> > +	c->ops.disable_dsc = dpu_hw_pp_dsc_disable;
> >  
> >  	if (test_bit(DPU_PINGPONG_DITHER, &features))
> >  		c->ops.setup_dither = dpu_hw_pp_setup_dither;
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> > index 89d08a715c16..12758468d9ca 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> > @@ -124,6 +124,20 @@ struct dpu_hw_pingpong_ops {
> >  	 */
> >  	void (*setup_dither)(struct dpu_hw_pingpong *pp,
> >  			struct dpu_hw_dither_cfg *cfg);
> > +	/**
> > +	 * Enable DSC
> > +	 */
> > +	int (*enable_dsc)(struct dpu_hw_pingpong *pp);
> > +
> > +	/**
> > +	 * Disable DSC
> > +	 */
> > +	void (*disable_dsc)(struct dpu_hw_pingpong *pp);
> 
> It looks like most other callbacks in dpu1 use an `enable` function with
> a boolean, instead of having a separate disable function.  That should
> simplify the implementation down to a single ternary-if, too.  Would
> that be desired to use here?
> 
> - Marijn
> 
> > +
> > +	/**
> > +	 * Setup DSC
> > +	 */
> > +	int (*setup_dsc)(struct dpu_hw_pingpong *pp);
> >  };
> >  
> >  struct dpu_hw_merge_3d;
> > -- 
> > 2.31.1
> > 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block
  2022-02-17 21:54   ` Marijn Suijten
  2022-02-17 22:06     ` Marijn Suijten
@ 2022-02-17 22:12     ` Dmitry Baryshkov
  2022-02-17 22:39       ` Marijn Suijten
  1 sibling, 1 reply; 41+ messages in thread
From: Dmitry Baryshkov @ 2022-02-17 22:12 UTC (permalink / raw)
  To: Marijn Suijten, Vinod Koul
  Cc: Rob Clark, linux-arm-msm, Bjorn Andersson, David Airlie,
	Daniel Vetter, Jonathan Marek, Abhinav Kumar, Jeffrey Hugo,
	Sumit Semwal, linux-kernel, dri-devel, freedreno

On 18/02/2022 00:54, Marijn Suijten wrote:
> On 2021-11-16 11:52:46, Vinod Koul wrote:
>> In SDM845, DSC can be enabled by writing to pingpong block registers, so
>> add support for DSC in hw_pp
> 
> Nit: I don't think the ", so add support for DSC in XXX" part in this
> and other commit messages add anything.  You've already stated that in
> the title, the commit body is just extra justification (and can perhaps
> be filled with extra details about the patch contents instead).
> 
>> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> Signed-off-by: Vinod Koul <vkoul@kernel.org>
>> ---
>>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 32 +++++++++++++++++++
>>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++++++
>>   2 files changed, 46 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
>> index 55766c97c4c8..47c6ab6caf95 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
>> @@ -28,6 +28,9 @@
>>   #define PP_FBC_MODE                     0x034
>>   #define PP_FBC_BUDGET_CTL               0x038
>>   #define PP_FBC_LOSSY_MODE               0x03C
>> +#define PP_DSC_MODE                     0x0a0
>> +#define PP_DCE_DATA_IN_SWAP             0x0ac
> 
> This enum does not seem used here, is it used in another patch?
> 
>> +#define PP_DCE_DATA_OUT_SWAP            0x0c8
>>   
>>   #define PP_DITHER_EN			0x000
>>   #define PP_DITHER_BITDEPTH		0x004
>> @@ -245,6 +248,32 @@ static u32 dpu_hw_pp_get_line_count(struct dpu_hw_pingpong *pp)
>>   	return line;
>>   }
>>   
>> +static int dpu_hw_pp_dsc_enable(struct dpu_hw_pingpong *pp)
>> +{
>> +	struct dpu_hw_blk_reg_map *c = &pp->hw;
>> +
>> +	DPU_REG_WRITE(c, PP_DSC_MODE, 1);
>> +	return 0;
>> +}
>> +
>> +static void dpu_hw_pp_dsc_disable(struct dpu_hw_pingpong *pp)
>> +{
>> +	struct dpu_hw_blk_reg_map *c = &pp->hw;
>> +
>> +	DPU_REG_WRITE(c, PP_DSC_MODE, 0);
>> +}
>> +
>> +static int dpu_hw_pp_setup_dsc(struct dpu_hw_pingpong *pp)
>> +{
>> +	struct dpu_hw_blk_reg_map *pp_c = &pp->hw;
>> +	int data;
>> +
>> +	data = DPU_REG_READ(pp_c, PP_DCE_DATA_OUT_SWAP);
>> +	data |= BIT(18); /* endian flip */
>> +	DPU_REG_WRITE(pp_c, PP_DCE_DATA_OUT_SWAP, data);
>> +	return 0;
>> +}
>> +
>>   static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
>>   				unsigned long features)
>>   {
>> @@ -256,6 +285,9 @@ static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
>>   	c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
>>   	c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
>>   	c->ops.get_line_count = dpu_hw_pp_get_line_count;
>> +	c->ops.setup_dsc = dpu_hw_pp_setup_dsc;
>> +	c->ops.enable_dsc = dpu_hw_pp_dsc_enable;
>> +	c->ops.disable_dsc = dpu_hw_pp_dsc_disable;
>>   
>>   	if (test_bit(DPU_PINGPONG_DITHER, &features))
>>   		c->ops.setup_dither = dpu_hw_pp_setup_dither;
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
>> index 89d08a715c16..12758468d9ca 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
>> @@ -124,6 +124,20 @@ struct dpu_hw_pingpong_ops {
>>   	 */
>>   	void (*setup_dither)(struct dpu_hw_pingpong *pp,
>>   			struct dpu_hw_dither_cfg *cfg);
>> +	/**
>> +	 * Enable DSC
>> +	 */
>> +	int (*enable_dsc)(struct dpu_hw_pingpong *pp);
>> +
>> +	/**
>> +	 * Disable DSC
>> +	 */
>> +	void (*disable_dsc)(struct dpu_hw_pingpong *pp);
> 
> It looks like most other callbacks in dpu1 use an `enable` function with
> a boolean, instead of having a separate disable function.  That should
> simplify the implementation down to a single ternary-if, too.  Would
> that be desired to use here?

Just my 2c. I personally hate the unified functions with the boolean 
argument. One of the reasons being the return value. Typically you do 
not expect that the disable function can fail (or return an error). But 
the unified function provides an error (to be handled) even in the 
disable case.

Last, but not least, overall the kernel API is biased towards separate 
enable and disable calls.

> 
> - Marijn
> 
>> +
>> +	/**
>> +	 * Setup DSC
>> +	 */
>> +	int (*setup_dsc)(struct dpu_hw_pingpong *pp);
>>   };
>>   
>>   struct dpu_hw_merge_3d;
>> -- 
>> 2.31.1
>>


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block
  2022-02-17 22:12     ` Dmitry Baryshkov
@ 2022-02-17 22:39       ` Marijn Suijten
  0 siblings, 0 replies; 41+ messages in thread
From: Marijn Suijten @ 2022-02-17 22:39 UTC (permalink / raw)
  To: Dmitry Baryshkov
  Cc: Vinod Koul, Rob Clark, linux-arm-msm, Bjorn Andersson,
	David Airlie, Daniel Vetter, Jonathan Marek, Abhinav Kumar,
	Jeffrey Hugo, Sumit Semwal, linux-kernel, dri-devel, freedreno

On 2022-02-18 01:12:02, Dmitry Baryshkov wrote:
> On 18/02/2022 00:54, Marijn Suijten wrote:
> > On 2021-11-16 11:52:46, Vinod Koul wrote:
> >> In SDM845, DSC can be enabled by writing to pingpong block registers, so
> >> add support for DSC in hw_pp
> > 
> > Nit: I don't think the ", so add support for DSC in XXX" part in this
> > and other commit messages add anything.  You've already stated that in
> > the title, the commit body is just extra justification (and can perhaps
> > be filled with extra details about the patch contents instead).
> > 
> >> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
> >> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> >> ---
> >>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 32 +++++++++++++++++++
> >>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++++++
> >>   2 files changed, 46 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> >> index 55766c97c4c8..47c6ab6caf95 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> >> @@ -28,6 +28,9 @@
> >>   #define PP_FBC_MODE                     0x034
> >>   #define PP_FBC_BUDGET_CTL               0x038
> >>   #define PP_FBC_LOSSY_MODE               0x03C
> >> +#define PP_DSC_MODE                     0x0a0
> >> +#define PP_DCE_DATA_IN_SWAP             0x0ac
> > 
> > This enum does not seem used here, is it used in another patch?
> > 
> >> +#define PP_DCE_DATA_OUT_SWAP            0x0c8
> >>   
> >>   #define PP_DITHER_EN			0x000
> >>   #define PP_DITHER_BITDEPTH		0x004
> >> @@ -245,6 +248,32 @@ static u32 dpu_hw_pp_get_line_count(struct dpu_hw_pingpong *pp)
> >>   	return line;
> >>   }
> >>   
> >> +static int dpu_hw_pp_dsc_enable(struct dpu_hw_pingpong *pp)
> >> +{
> >> +	struct dpu_hw_blk_reg_map *c = &pp->hw;
> >> +
> >> +	DPU_REG_WRITE(c, PP_DSC_MODE, 1);
> >> +	return 0;
> >> +}
> >> +
> >> +static void dpu_hw_pp_dsc_disable(struct dpu_hw_pingpong *pp)
> >> +{
> >> +	struct dpu_hw_blk_reg_map *c = &pp->hw;
> >> +
> >> +	DPU_REG_WRITE(c, PP_DSC_MODE, 0);
> >> +}
> >> +
> >> +static int dpu_hw_pp_setup_dsc(struct dpu_hw_pingpong *pp)
> >> +{
> >> +	struct dpu_hw_blk_reg_map *pp_c = &pp->hw;
> >> +	int data;
> >> +
> >> +	data = DPU_REG_READ(pp_c, PP_DCE_DATA_OUT_SWAP);
> >> +	data |= BIT(18); /* endian flip */
> >> +	DPU_REG_WRITE(pp_c, PP_DCE_DATA_OUT_SWAP, data);
> >> +	return 0;
> >> +}
> >> +
> >>   static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
> >>   				unsigned long features)
> >>   {
> >> @@ -256,6 +285,9 @@ static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
> >>   	c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
> >>   	c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
> >>   	c->ops.get_line_count = dpu_hw_pp_get_line_count;
> >> +	c->ops.setup_dsc = dpu_hw_pp_setup_dsc;
> >> +	c->ops.enable_dsc = dpu_hw_pp_dsc_enable;
> >> +	c->ops.disable_dsc = dpu_hw_pp_dsc_disable;
> >>   
> >>   	if (test_bit(DPU_PINGPONG_DITHER, &features))
> >>   		c->ops.setup_dither = dpu_hw_pp_setup_dither;
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> >> index 89d08a715c16..12758468d9ca 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
> >> @@ -124,6 +124,20 @@ struct dpu_hw_pingpong_ops {
> >>   	 */
> >>   	void (*setup_dither)(struct dpu_hw_pingpong *pp,
> >>   			struct dpu_hw_dither_cfg *cfg);
> >> +	/**
> >> +	 * Enable DSC
> >> +	 */
> >> +	int (*enable_dsc)(struct dpu_hw_pingpong *pp);
> >> +
> >> +	/**
> >> +	 * Disable DSC
> >> +	 */
> >> +	void (*disable_dsc)(struct dpu_hw_pingpong *pp);
> > 
> > It looks like most other callbacks in dpu1 use an `enable` function with
> > a boolean, instead of having a separate disable function.  That should
> > simplify the implementation down to a single ternary-if, too.  Would
> > that be desired to use here?
> 
> Just my 2c. I personally hate the unified functions with the boolean 
> argument. One of the reasons being the return value. Typically you do 
> not expect that the disable function can fail (or return an error). But 
> the unified function provides an error (to be handled) even in the 
> disable case.
> 
> Last, but not least, overall the kernel API is biased towards separate 
> enable and disable calls.

Fair enough, we should replace the other functions then.  Or perhaps
drop the return argument entirely, it's always zero for enable_dsc
anyway.  I doubt we'll ever add additional checks here?  If we do,
things can be split again.

- Marijn

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [Freedreno] [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2022-02-17 15:11       ` Marijn Suijten
@ 2022-03-22 17:16         ` Vinod Koul
  2022-03-22 18:59           ` Marijn Suijten
  0 siblings, 1 reply; 41+ messages in thread
From: Vinod Koul @ 2022-03-22 17:16 UTC (permalink / raw)
  To: Marijn Suijten
  Cc: Jonathan Marek, Jeffrey Hugo, David Airlie, linux-arm-msm,
	Konrad Dybcio, linux-kernel, Abhinav Kumar, Bjorn Andersson,
	Rob Clark, dri-devel, Daniel Vetter, Dmitry Baryshkov, freedreno,
	Sumit Semwal

On 17-02-22, 16:11, Marijn Suijten wrote:
> Hi Vinod,
> 
> Thanks for taking time to go through this review, please find some
> clarifications below.
> 
> On 2022-02-17 16:44:04, Vinod Koul wrote:
> > Hi Marijn,
> > 
> > On 11-12-21, 01:03, Marijn Suijten wrote:
> > 
> > > > +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> > > > +				  int pic_width, int pic_height)
> > > 
> > > This function - adopted from downstream - does not seem to perform a
> > > whole lot, especially without the modulo checks against the slice size.
> > > Perhaps it can be inlined?
> > 
> > Most of the code here is :)
> > 
> > This was split from downstream code to check and update dimension. We
> > can inline this, or should we leave that to compiler. I am not a very
> > big fan of inlining...
> 
> It doesn't seem beneficial to code readability to have this function,
> which is only called just once and also has the same struct members read
> in a `DBG()` directly, abstracted away to a function.  Not really
> concerned about generated code/performance FWIW.
> 
> Also note that the caller isn't checking the `-EINVAL` result...

I have made this void inline.

> > > 
> > > > +{
> > > > +	if (!dsc || !pic_width || !pic_height) {
> > > > +		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
> > > > +		return -EINVAL;
> > > > +	}
> > > > +
> > > > +	dsc->drm->pic_width = pic_width;
> > > > +	dsc->drm->pic_height = pic_height;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > >  static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > > >  {
> > > >  	struct drm_display_mode *mode = msm_host->mode;
> > > > @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > > >  		hdisplay /= 2;
> > > >  	}
> > > >  
> > > > +	if (msm_host->dsc) {
> > > > +		struct msm_display_dsc_config *dsc = msm_host->dsc;
> > > > +
> > > > +		/* update dsc params with timing params */
> > > > +		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
> 
> That is, the result code here should be checked (or function inlined).

This function return void, so no point in checking

> > > > +
> > > > +		/* we do the calculations for dsc parameters here so that
> > > > +		 * panel can use these parameters
> > > > +		 */
> > > > +		dsi_populate_dsc_params(dsc);
> > > > +
> > > > +		/* Divide the display by 3 but keep back/font porch and
> > > > +		 * pulse width same
> > > > +		 */
> > > 
> > > A more general nit on the comments in this patch series: it is
> > > appreciated if comments explain the rationale rather than - or in
> > > addition to - merely paraphrasing the code that follows.
> > 
> > Yes it might be the case here, but in this case I wanted to explicitly
> > point out hat we need to divide display by 3...
> 
> The main point here is justifying _why_ there's a division by 3 for the
> active portion of the signal, I presume that's the compression ratio
> (having not read into the DSC compression standard yet at all)?

I have updated this comment

> > > > +		if (msm_host->dsc) {
> > > > +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> > > > +			u32 reg, reg_ctrl, reg_ctrl2;
> > > > +			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
> > > > +
> > > > +			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
> > > > +			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
> > > 
> > > Shouldn't old values be masked out first, before writing new bits or
> > > values below?  The video-mode variant doesn't read back old register
> > > values.
> > 
> > This follows downstream where the registers are read, modified and
> > written back
> 
> Are you sure about this?  The register values are never cleared, meaning
> that only bits get added through the `|=` below but never unset - unless
> downstream clears these registers elsewhere before ending up in (their
> equivalent of) dsi_timing_setup.

I have modified video mode to write and not read now. For command mode
all bits are set to some value so no need to mask old values for that

> Thanks.  I forgot to mention: there seem to be a lot of similarities
> between the video and commandmode computations, can those possibly be
> factored out of the if-else to save on duplication and accidental
> mismatches like these?

Thanks, this was a good suggestion and am happy to report that I have
incorporated this and indeed code looks better

-- 
~Vinod

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [Freedreno] [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2022-03-22 17:16         ` Vinod Koul
@ 2022-03-22 18:59           ` Marijn Suijten
  2022-03-23 10:57             ` Vinod Koul
  0 siblings, 1 reply; 41+ messages in thread
From: Marijn Suijten @ 2022-03-22 18:59 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Jonathan Marek, Jeffrey Hugo, David Airlie, linux-arm-msm,
	Konrad Dybcio, linux-kernel, Abhinav Kumar, Bjorn Andersson,
	Rob Clark, dri-devel, Daniel Vetter, Dmitry Baryshkov, freedreno,
	Sumit Semwal

On 2022-03-22 22:46:50, Vinod Koul wrote:
> On 17-02-22, 16:11, Marijn Suijten wrote:
> > Hi Vinod,
> > 
> > Thanks for taking time to go through this review, please find some
> > clarifications below.
> > 
> > On 2022-02-17 16:44:04, Vinod Koul wrote:
> > > Hi Marijn,
> > > 
> > > On 11-12-21, 01:03, Marijn Suijten wrote:
> > > 
> > > > > +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> > > > > +				  int pic_width, int pic_height)
> > > > 
> > > > This function - adopted from downstream - does not seem to perform a
> > > > whole lot, especially without the modulo checks against the slice size.
> > > > Perhaps it can be inlined?
> > > 
> > > Most of the code here is :)
> > > 
> > > This was split from downstream code to check and update dimension. We
> > > can inline this, or should we leave that to compiler. I am not a very
> > > big fan of inlining...
> > 
> > It doesn't seem beneficial to code readability to have this function,
> > which is only called just once and also has the same struct members read
> > in a `DBG()` directly, abstracted away to a function.  Not really
> > concerned about generated code/performance FWIW.
> > 
> > Also note that the caller isn't checking the `-EINVAL` result...
> 
> I have made this void inline.

Perhaps there is a misunderstanding here: with inlining I am referring
to the process of transplanting the _function body_ to the only
call-site, not adding the `inline` keyword nor changing this to `void`.

The checks that make this function return `-EINVAL` seem valid, so the
caller should check it instead of removing the return?

> > > > 
> > > > > +{
> > > > > +	if (!dsc || !pic_width || !pic_height) {
> > > > > +		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
> > > > > +		return -EINVAL;
> > > > > +	}
> > > > > +
> > > > > +	dsc->drm->pic_width = pic_width;
> > > > > +	dsc->drm->pic_height = pic_height;
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > >  static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > > > >  {
> > > > >  	struct drm_display_mode *mode = msm_host->mode;
> > > > > @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > > > >  		hdisplay /= 2;
> > > > >  	}
> > > > >  
> > > > > +	if (msm_host->dsc) {
> > > > > +		struct msm_display_dsc_config *dsc = msm_host->dsc;
> > > > > +
> > > > > +		/* update dsc params with timing params */
> > > > > +		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
> > 
> > That is, the result code here should be checked (or function inlined).
> 
> This function return void, so no point in checking

It isn't returning `void` in the current patch series that my email is
reviewing, hence explicitly mentioning here that it may have been
overlooked.

Please only convert this to `void` if you are sure that the clause that
originally made `dsi_dsc_update_pic_dim()` return `-EINVAL` on invalid
input is unreachable (if, for example, you moved this check to another
location, say here in `dsi_timing_setup`).

Alas, it's pretty tricky to reason and pose assumptions about code that
I cannot see; we should probably continue this discussion in the next
patch revision depending on how it looks :)

> > [..]
> > Thanks.  I forgot to mention: there seem to be a lot of similarities
> > between the video and commandmode computations, can those possibly be
> > factored out of the if-else to save on duplication and accidental
> > mismatches like these?
> 
> Thanks, this was a good suggestion and am happy to report that I have
> incorporated this and indeed code looks better

Thank you for applying this and the other comments, glad to hear the
code is shaping up and looking forward to the next revision!

- Marijn

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [Freedreno] [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration
  2022-03-22 18:59           ` Marijn Suijten
@ 2022-03-23 10:57             ` Vinod Koul
  0 siblings, 0 replies; 41+ messages in thread
From: Vinod Koul @ 2022-03-23 10:57 UTC (permalink / raw)
  To: Marijn Suijten
  Cc: Jonathan Marek, Jeffrey Hugo, David Airlie, linux-arm-msm,
	Konrad Dybcio, linux-kernel, Abhinav Kumar, Bjorn Andersson,
	Rob Clark, dri-devel, Daniel Vetter, Dmitry Baryshkov, freedreno,
	Sumit Semwal

On 22-03-22, 19:59, Marijn Suijten wrote:
> On 2022-03-22 22:46:50, Vinod Koul wrote:
> > On 17-02-22, 16:11, Marijn Suijten wrote:
> > > Hi Vinod,
> > > 
> > > Thanks for taking time to go through this review, please find some
> > > clarifications below.
> > > 
> > > On 2022-02-17 16:44:04, Vinod Koul wrote:
> > > > Hi Marijn,
> > > > 
> > > > On 11-12-21, 01:03, Marijn Suijten wrote:
> > > > 
> > > > > > +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> > > > > > +				  int pic_width, int pic_height)
> > > > > 
> > > > > This function - adopted from downstream - does not seem to perform a
> > > > > whole lot, especially without the modulo checks against the slice size.
> > > > > Perhaps it can be inlined?
> > > > 
> > > > Most of the code here is :)
> > > > 
> > > > This was split from downstream code to check and update dimension. We
> > > > can inline this, or should we leave that to compiler. I am not a very
> > > > big fan of inlining...
> > > 
> > > It doesn't seem beneficial to code readability to have this function,
> > > which is only called just once and also has the same struct members read
> > > in a `DBG()` directly, abstracted away to a function.  Not really
> > > concerned about generated code/performance FWIW.
> > > 
> > > Also note that the caller isn't checking the `-EINVAL` result...
> > 
> > I have made this void inline.
> 
> Perhaps there is a misunderstanding here: with inlining I am referring
> to the process of transplanting the _function body_ to the only
> call-site, not adding the `inline` keyword nor changing this to `void`.
> 
> The checks that make this function return `-EINVAL` seem valid, so the
> caller should check it instead of removing the return?

Okay somehow I misunderstood then, let me see how the code looks in this
case then
-- 
~Vinod

^ permalink raw reply	[flat|nested] 41+ messages in thread

end of thread, other threads:[~2022-03-23 10:58 UTC | newest]

Thread overview: 41+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-16  6:22 [PATCH v3 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
2021-11-16  6:22 ` [PATCH v3 01/13] drm/msm/dsi: add support for dsc data Vinod Koul
2021-11-24 15:53   ` Dmitry Baryshkov
2021-11-30  1:14   ` [Freedreno] " Abhinav Kumar
2021-11-16  6:22 ` [PATCH v3 02/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2021-11-24 15:35   ` Dmitry Baryshkov
2021-11-16  6:22 ` [PATCH v3 03/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2022-02-17 21:54   ` Marijn Suijten
2022-02-17 22:06     ` Marijn Suijten
2022-02-17 22:12     ` Dmitry Baryshkov
2022-02-17 22:39       ` Marijn Suijten
2021-11-16  6:22 ` [PATCH v3 04/13] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
2021-11-16  6:22 ` [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
2021-11-24 15:39   ` Dmitry Baryshkov
2021-11-24 15:40   ` Dmitry Baryshkov
2021-11-24 15:57     ` Dmitry Baryshkov
2021-11-24 15:43   ` Dmitry Baryshkov
2021-11-16  6:22 ` [PATCH v3 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
2021-11-24 15:40   ` Dmitry Baryshkov
2021-11-16  6:22 ` [PATCH v3 07/13] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
2021-11-24 15:58   ` Dmitry Baryshkov
2021-11-16  6:22 ` [PATCH v3 08/13] drm/msm: Add missing structure documentation Vinod Koul
2021-11-16  6:22 ` [PATCH v3 09/13] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
2021-11-24 15:59   ` Dmitry Baryshkov
2021-11-16  6:22 ` [PATCH v3 10/13] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
2021-11-24 16:01   ` Dmitry Baryshkov
2021-11-16  6:22 ` [PATCH v3 11/13] drm/msm/dsi: add mode valid callback for dsi_mgr Vinod Koul
2021-11-24 20:33   ` Dmitry Baryshkov
2021-11-16  6:22 ` [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
2021-11-18 21:47   ` kernel test robot
2021-11-24 16:21   ` Dmitry Baryshkov
2021-11-24 16:27     ` Dmitry Baryshkov
2021-12-11  0:03   ` Marijn Suijten
2022-02-17 11:14     ` [Freedreno] " Vinod Koul
2022-02-17 15:11       ` Marijn Suijten
2022-03-22 17:16         ` Vinod Koul
2022-03-22 18:59           ` Marijn Suijten
2022-03-23 10:57             ` Vinod Koul
2021-11-16  6:22 ` [PATCH v3 13/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
2021-11-24 16:28   ` Dmitry Baryshkov
2021-11-24 16:51   ` Dmitry Baryshkov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).