LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Markus Mayer <code@mmayer.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Gregory Fong <gregory.0xf0@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Markus Mayer <mmayer@broadcom.com>,
	Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com>,
	Power Management List <linux-pm@vger.kernel.org>,
	ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] cpufreq: brcmstb-avs-cpufreq: remove development debug support
Date: Mon, 30 Apr 2018 10:26:30 +0200	[thread overview]
Message-ID: <10520961.CpbDj92bOl@aspire.rjw.lan> (raw)
In-Reply-To: <20180418155643.36464-2-code@mmayer.net>

On Wednesday, April 18, 2018 5:56:42 PM CEST Markus Mayer wrote:
> From: Markus Mayer <mmayer@broadcom.com>
> 
> This debug code was helpful while developing the driver, but it isn't
> being used for anything anymore.
> 
> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
> ---
>  drivers/cpufreq/Kconfig.arm           |  10 --
>  drivers/cpufreq/brcmstb-avs-cpufreq.c | 323 +---------------------------------
>  2 files changed, 1 insertion(+), 332 deletions(-)
> 
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 7f56fe5183f2..de55c7d57438 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -71,16 +71,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ
>  
>  	  Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
>  
> -config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
> -	bool "Broadcom STB AVS CPUfreq driver sysfs debug capability"
> -	depends on ARM_BRCMSTB_AVS_CPUFREQ
> -	help
> -	  Enabling this option turns on debug support via sysfs under
> -	  /sys/kernel/debug/brcmstb-avs-cpufreq. It is possible to read all and
> -	  write some AVS mailbox registers through sysfs entries.
> -
> -	  If in doubt, say N.
> -
>  config ARM_EXYNOS5440_CPUFREQ
>  	tristate "SAMSUNG EXYNOS5440"
>  	depends on SOC_EXYNOS5440
> diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
> index 6cdac1aaf23c..b07559b9ed99 100644
> --- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
> +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
> @@ -49,13 +49,6 @@
>  #include <linux/platform_device.h>
>  #include <linux/semaphore.h>
>  
> -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
> -#include <linux/ctype.h>
> -#include <linux/debugfs.h>
> -#include <linux/slab.h>
> -#include <linux/uaccess.h>
> -#endif
> -
>  /* Max number of arguments AVS calls take */
>  #define AVS_MAX_CMD_ARGS	4
>  /*
> @@ -182,88 +175,11 @@ struct private_data {
>  	void __iomem *base;
>  	void __iomem *avs_intr_base;
>  	struct device *dev;
> -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
> -	struct dentry *debugfs;
> -#endif
>  	struct completion done;
>  	struct semaphore sem;
>  	struct pmap pmap;
>  };
>  
> -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
> -
> -enum debugfs_format {
> -	DEBUGFS_NORMAL,
> -	DEBUGFS_FLOAT,
> -	DEBUGFS_REV,
> -};
> -
> -struct debugfs_data {
> -	struct debugfs_entry *entry;
> -	struct private_data *priv;
> -};
> -
> -struct debugfs_entry {
> -	char *name;
> -	u32 offset;
> -	fmode_t mode;
> -	enum debugfs_format format;
> -};
> -
> -#define DEBUGFS_ENTRY(name, mode, format)	{ \
> -	#name, AVS_MBOX_##name, mode, format \
> -}
> -
> -/*
> - * These are used for debugfs only. Otherwise we use AVS_MBOX_PARAM() directly.
> - */
> -#define AVS_MBOX_PARAM1		AVS_MBOX_PARAM(0)
> -#define AVS_MBOX_PARAM2		AVS_MBOX_PARAM(1)
> -#define AVS_MBOX_PARAM3		AVS_MBOX_PARAM(2)
> -#define AVS_MBOX_PARAM4		AVS_MBOX_PARAM(3)
> -
> -/*
> - * This table stores the name, access permissions and offset for each hardware
> - * register and is used to generate debugfs entries.
> - */
> -static struct debugfs_entry debugfs_entries[] = {
> -	DEBUGFS_ENTRY(COMMAND, S_IWUSR, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(STATUS, S_IWUSR, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(VOLTAGE0, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(TEMP0, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(PV0, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(MV0, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(PARAM1, S_IWUSR, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(PARAM2, S_IWUSR, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(PARAM3, S_IWUSR, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(PARAM4, S_IWUSR, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(REVISION, 0, DEBUGFS_REV),
> -	DEBUGFS_ENTRY(PSTATE, 0, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(HEARTBEAT, 0, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(MAGIC, S_IWUSR, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(SIGMA_HVT, 0, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(SIGMA_SVT, 0, DEBUGFS_NORMAL),
> -	DEBUGFS_ENTRY(VOLTAGE1, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(TEMP1, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(PV1, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(MV1, 0, DEBUGFS_FLOAT),
> -	DEBUGFS_ENTRY(FREQUENCY, 0, DEBUGFS_NORMAL),
> -};
> -
> -static int brcm_avs_target_index(struct cpufreq_policy *, unsigned int);
> -
> -static char *__strtolower(char *s)
> -{
> -	char *p;
> -
> -	for (p = s; *p; p++)
> -		*p = tolower(*p);
> -
> -	return s;
> -}
> -
> -#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */
> -
>  static void __iomem *__map_region(const char *name)
>  {
>  	struct device_node *np;
> @@ -516,238 +432,6 @@ brcm_avs_get_freq_table(struct device *dev, struct private_data *priv)
>  	return table;
>  }
>  
> -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
> -
> -#define MANT(x)	(unsigned int)(abs((x)) / 1000)
> -#define FRAC(x)	(unsigned int)(abs((x)) - abs((x)) / 1000 * 1000)
> -
> -static int brcm_avs_debug_show(struct seq_file *s, void *data)
> -{
> -	struct debugfs_data *dbgfs = s->private;
> -	void __iomem *base;
> -	u32 val, offset;
> -
> -	if (!dbgfs) {
> -		seq_puts(s, "No device pointer\n");
> -		return 0;
> -	}
> -
> -	base = dbgfs->priv->base;
> -	offset = dbgfs->entry->offset;
> -	val = readl(base + offset);
> -	switch (dbgfs->entry->format) {
> -	case DEBUGFS_NORMAL:
> -		seq_printf(s, "%u\n", val);
> -		break;
> -	case DEBUGFS_FLOAT:
> -		seq_printf(s, "%d.%03d\n", MANT(val), FRAC(val));
> -		break;
> -	case DEBUGFS_REV:
> -		seq_printf(s, "%c.%c.%c.%c\n", (val >> 24 & 0xff),
> -			   (val >> 16 & 0xff), (val >> 8 & 0xff),
> -			   val & 0xff);
> -		break;
> -	}
> -	seq_printf(s, "0x%08x\n", val);
> -
> -	return 0;
> -}
> -
> -#undef MANT
> -#undef FRAC
> -
> -static ssize_t brcm_avs_seq_write(struct file *file, const char __user *buf,
> -				  size_t size, loff_t *ppos)
> -{
> -	struct seq_file *s = file->private_data;
> -	struct debugfs_data *dbgfs = s->private;
> -	struct private_data *priv = dbgfs->priv;
> -	void __iomem *base, *avs_intr_base;
> -	bool use_issue_command = false;
> -	unsigned long val, offset;
> -	char str[128];
> -	int ret;
> -	char *str_ptr = str;
> -
> -	if (size >= sizeof(str))
> -		return -E2BIG;
> -
> -	memset(str, 0, sizeof(str));
> -	ret = copy_from_user(str, buf, size);
> -	if (ret)
> -		return ret;
> -
> -	base = priv->base;
> -	avs_intr_base = priv->avs_intr_base;
> -	offset = dbgfs->entry->offset;
> -	/*
> -	 * Special case writing to "command" entry only: if the string starts
> -	 * with a 'c', we use the driver's __issue_avs_command() function.
> -	 * Otherwise, we perform a raw write. This should allow testing of raw
> -	 * access as well as using the higher level function. (Raw access
> -	 * doesn't clear the firmware return status after issuing the command.)
> -	 */
> -	if (str_ptr[0] == 'c' && offset == AVS_MBOX_COMMAND) {
> -		use_issue_command = true;
> -		str_ptr++;
> -	}
> -	if (kstrtoul(str_ptr, 0, &val) != 0)
> -		return -EINVAL;
> -
> -	/*
> -	 * Setting the P-state is a special case. We need to update the CPU
> -	 * frequency we report.
> -	 */
> -	if (val == AVS_CMD_SET_PSTATE) {
> -		struct cpufreq_policy *policy;
> -		unsigned int pstate;
> -
> -		policy = cpufreq_cpu_get(smp_processor_id());
> -		/* Read back the P-state we are about to set */
> -		pstate = readl(base + AVS_MBOX_PARAM(0));
> -		if (use_issue_command) {
> -			ret = brcm_avs_target_index(policy, pstate);
> -			return ret ? ret : size;
> -		}
> -		policy->cur = policy->freq_table[pstate].frequency;
> -	}
> -
> -	if (use_issue_command) {
> -		ret = __issue_avs_command(priv, val, false, NULL);
> -	} else {
> -		/* Locking here is not perfect, but is only for debug. */
> -		ret = down_interruptible(&priv->sem);
> -		if (ret)
> -			return ret;
> -
> -		writel(val, base + offset);
> -		/* We have to wake up the firmware to process a command. */
> -		if (offset == AVS_MBOX_COMMAND)
> -			writel(AVS_CPU_L2_INT_MASK,
> -			       avs_intr_base + AVS_CPU_L2_SET0);
> -		up(&priv->sem);
> -	}
> -
> -	return ret ? ret : size;
> -}
> -
> -static struct debugfs_entry *__find_debugfs_entry(const char *name)
> -{
> -	int i;
> -
> -	for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++)
> -		if (strcasecmp(debugfs_entries[i].name, name) == 0)
> -			return &debugfs_entries[i];
> -
> -	return NULL;
> -}
> -
> -static int brcm_avs_debug_open(struct inode *inode, struct file *file)
> -{
> -	struct debugfs_data *data;
> -	fmode_t fmode;
> -	int ret;
> -
> -	/*
> -	 * seq_open(), which is called by single_open(), clears "write" access.
> -	 * We need write access to some files, so we preserve our access mode
> -	 * and restore it.
> -	 */
> -	fmode = file->f_mode;
> -	/*
> -	 * Check access permissions even for root. We don't want to be writing
> -	 * to read-only registers. Access for regular users has already been
> -	 * checked by the VFS layer.
> -	 */
> -	if ((fmode & FMODE_WRITER) && !(inode->i_mode & S_IWUSR))
> -		return -EACCES;
> -
> -	data = kmalloc(sizeof(*data), GFP_KERNEL);
> -	if (!data)
> -		return -ENOMEM;
> -	/*
> -	 * We use the same file system operations for all our debug files. To
> -	 * produce specific output, we look up the file name upon opening a
> -	 * debugfs entry and map it to a memory offset. This offset is then used
> -	 * in the generic "show" function to read a specific register.
> -	 */
> -	data->entry = __find_debugfs_entry(file->f_path.dentry->d_iname);
> -	data->priv = inode->i_private;
> -
> -	ret = single_open(file, brcm_avs_debug_show, data);
> -	if (ret)
> -		kfree(data);
> -	file->f_mode = fmode;
> -
> -	return ret;
> -}
> -
> -static int brcm_avs_debug_release(struct inode *inode, struct file *file)
> -{
> -	struct seq_file *seq_priv = file->private_data;
> -	struct debugfs_data *data = seq_priv->private;
> -
> -	kfree(data);
> -	return single_release(inode, file);
> -}
> -
> -static const struct file_operations brcm_avs_debug_ops = {
> -	.open		= brcm_avs_debug_open,
> -	.read		= seq_read,
> -	.write		= brcm_avs_seq_write,
> -	.llseek		= seq_lseek,
> -	.release	= brcm_avs_debug_release,
> -};
> -
> -static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev)
> -{
> -	struct private_data *priv = platform_get_drvdata(pdev);
> -	struct dentry *dir;
> -	int i;
> -
> -	if (!priv)
> -		return;
> -
> -	dir = debugfs_create_dir(BRCM_AVS_CPUFREQ_NAME, NULL);
> -	if (IS_ERR_OR_NULL(dir))
> -		return;
> -	priv->debugfs = dir;
> -
> -	for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++) {
> -		/*
> -		 * The DEBUGFS_ENTRY macro generates uppercase strings. We
> -		 * convert them to lowercase before creating the debugfs
> -		 * entries.
> -		 */
> -		char *entry = __strtolower(debugfs_entries[i].name);
> -		fmode_t mode = debugfs_entries[i].mode;
> -
> -		if (!debugfs_create_file(entry, S_IFREG | S_IRUGO | mode,
> -					 dir, priv, &brcm_avs_debug_ops)) {
> -			priv->debugfs = NULL;
> -			debugfs_remove_recursive(dir);
> -			break;
> -		}
> -	}
> -}
> -
> -static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev)
> -{
> -	struct private_data *priv = platform_get_drvdata(pdev);
> -
> -	if (priv && priv->debugfs) {
> -		debugfs_remove_recursive(priv->debugfs);
> -		priv->debugfs = NULL;
> -	}
> -}
> -
> -#else
> -
> -static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev) {}
> -static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev) {}
> -
> -#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */
> -
>  /*
>   * To ensure the right firmware is running we need to
>   *    - check the MAGIC matches what we expect
> @@ -1016,11 +700,8 @@ static int brcm_avs_cpufreq_probe(struct platform_device *pdev)
>  		return ret;
>  
>  	brcm_avs_driver.driver_data = pdev;
> -	ret = cpufreq_register_driver(&brcm_avs_driver);
> -	if (!ret)
> -		brcm_avs_cpufreq_debug_init(pdev);
>  
> -	return ret;
> +	return cpufreq_register_driver(&brcm_avs_driver);
>  }
>  
>  static int brcm_avs_cpufreq_remove(struct platform_device *pdev)
> @@ -1032,8 +713,6 @@ static int brcm_avs_cpufreq_remove(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	brcm_avs_cpufreq_debug_exit(pdev);
> -
>  	priv = platform_get_drvdata(pdev);
>  	iounmap(priv->base);
>  	iounmap(priv->avs_intr_base);
> 

Applied and merged into 4.17-rc3, thanks!

  parent reply	other threads:[~2018-04-30  8:26 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-18 15:56 [PATCH 0/2] brcmstb-avs-cpufreq changes Markus Mayer
2018-04-18 15:56 ` [PATCH 1/2] cpufreq: brcmstb-avs-cpufreq: remove development debug support Markus Mayer
2018-04-19  4:13   ` Viresh Kumar
2018-04-30  8:26   ` Rafael J. Wysocki [this message]
2018-04-18 15:56 ` [PATCH 2/2] cpufreq: brcmstb-avs-cpufreq: prefer SCMI cpufreq if supported Markus Mayer
2018-04-18 16:37   ` Florian Fainelli
2018-04-19 22:10     ` Markus Mayer
2018-04-19  4:16   ` Viresh Kumar
2018-04-19 10:37     ` Sudeep Holla
2018-04-20  4:42       ` Viresh Kumar
2018-04-20  9:15         ` Sudeep Holla
2018-04-20  9:35           ` Viresh Kumar
2018-04-20 16:50             ` Florian Fainelli
2018-04-23  4:23               ` Viresh Kumar
2018-04-19 10:35   ` Sudeep Holla
2018-04-19 16:21     ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=10520961.CpbDj92bOl@aspire.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=code@mmayer.net \
    --cc=computersforpeace@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregory.0xf0@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mmayer@broadcom.com \
    --cc=viresh.kumar@linaro.org \
    --subject='Re: [PATCH 1/2] cpufreq: brcmstb-avs-cpufreq: remove development debug support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).