LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: Larry Finger <Larry.Finger@lwfinger.net>,
	Phillip Potter <phil@philpotter.co.uk>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	Pavel Skripkin <paskripkin@gmail.com>
Subject: Re: [PATCH v2 1/2] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq()
Date: Tue, 24 Aug 2021 17:23:59 +0200	[thread overview]
Message-ID: <10796100.lKEGA7Tnzb@localhost.localdomain> (raw)
In-Reply-To: <ac4b9c30-fceb-6838-a6d5-b9f03d5a0246@gmail.com>

On Tuesday, August 24, 2021 4:35:38 PM CEST Pavel Skripkin wrote:
> On 8/24/21 5:28 PM, Fabio M. De Francesco wrote:
> > Replace usb_control_msg() with the new usb_control_msg_recv() and
> > usb_control_msg_send() API of USB Core in usbctrl_vendorreq().
> > Remove no more needed variables. Move out of an if-else block
> > some code that it is no more dependent on status < 0. Remove
> > redundant code depending on status > 0 or status == len.
> > 
> > Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
> > ---
> > 
> > v1->v2: According to suggestions by Christophe JAILLET
> > <christophe.jaillet@wanadoo.fr>, remove 'pipe' and pass an explicit 0
> > to the new API. According to suggestions by Pavel Skripkin
> > <paskripkin@gmail.com>, remove an extra if-else that is no more needed,
> > since status can be 0 and < 0 and there is no 3rd state, like it was before.
> > Many thanks to both them and to Phillip Potter <phil@philpotter.co.uk>
> > who kindly offered his time for the purpose of testing v1.
> >   
> > 
> >   drivers/staging/r8188eu/hal/usb_ops_linux.c | 45 ++++++++-------------
> >   1 file changed, 17 insertions(+), 28 deletions(-)
> > 
> > diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> > index a93d5cfe4635..13e925d21e00 100644
> > --- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
> > +++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> > @@ -15,9 +15,7 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
> >   	struct adapter	*adapt = pintfhdl->padapter;
> >   	struct dvobj_priv  *dvobjpriv = adapter_to_dvobj(adapt);
> >   	struct usb_device *udev = dvobjpriv->pusbdev;
> > -	unsigned int pipe;
> >   	int status = 0;
> > -	u8 reqtype;
> >   	u8 *pIo_buf;
> >   	int vendorreq_times = 0;
> >   
> > @@ -44,22 +42,22 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
> >   	}
> >   
> >   	while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
> > -		memset(pIo_buf, 0, len);
> > -
> >   		if (requesttype == 0x01) {
> > -			pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
> > -			reqtype =  REALTEK_USB_VENQT_READ;
> > +			status = usb_control_msg_recv(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
> > +						      REALTEK_USB_VENQT_READ, value,
> > +						      REALTEK_USB_VENQT_CMD_IDX, pIo_buf,
> > +						      len, RTW_USB_CONTROL_MSG_TIMEOUT,
> > +						      GFP_KERNEL);
> >   		} else {
> > -			pipe = usb_sndctrlpipe(udev, 0);/* write_out */
> > -			reqtype =  REALTEK_USB_VENQT_WRITE;
> >   			memcpy(pIo_buf, pdata, len);
> > +			status = usb_control_msg_send(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
> > +						      REALTEK_USB_VENQT_WRITE, value,
> > +						      REALTEK_USB_VENQT_CMD_IDX, pIo_buf,
> > +						      len, RTW_USB_CONTROL_MSG_TIMEOUT,
> > +						      GFP_KERNEL);
> >   		}
> >   
> > -		status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
> > -					 reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
> > -					 pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
> > -
> > -		if (status == len) {   /*  Success this control transfer. */
> > +		if (!status) {   /*  Success this control transfer. */
> >   			rtw_reset_continual_urb_error(dvobjpriv);
> >   			if (requesttype == 0x01)
> >   				memcpy(pdata, pIo_buf,  len);
> > @@ -68,20 +66,11 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
> >   				value, (requesttype == 0x01) ? "read" : "write",
> >   				len, status, *(u32 *)pdata, vendorreq_times);
> >   
> > -			if (status < 0) {
> > -				if (status == (-ESHUTDOWN) || status == -ENODEV) {
> > -					adapt->bSurpriseRemoved = true;
> > -				} else {
> > -					struct hal_data_8188e	*haldata = GET_HAL_DATA(adapt);
> > -					haldata->srestpriv.Wifi_Error_Status = USB_VEN_REQ_CMD_FAIL;
> > -				}
> > -			} else { /*  status != len && status >= 0 */
> > -				if (status > 0) {
> > -					if (requesttype == 0x01) {
> > -						/*  For Control read transfer, we have to copy the read data from pIo_buf to pdata. */
> > -						memcpy(pdata, pIo_buf,  len);
> > -					}
> > -				}
> > +			if (status == (-ESHUTDOWN) || status == -ENODEV) {
> > +				adapt->bSurpriseRemoved = true;
> > +			} else {
> > +				struct hal_data_8188e	*haldata = GET_HAL_DATA(adapt);
> > +				haldata->srestpriv.Wifi_Error_Status = USB_VEN_REQ_CMD_FAIL;
> >   			}
> >   
> >   			if (rtw_inc_and_chk_continual_urb_error(dvobjpriv)) {
> > @@ -92,7 +81,7 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
> >   		}
> >   
> >   		/*  firmware download is checksumed, don't retry */
> > -		if ((value >= FW_8188E_START_ADDRESS && value <= FW_8188E_END_ADDRESS) || status == len)
> > +		if (value >= FW_8188E_START_ADDRESS && value <= FW_8188E_END_ADDRESS)
> >   			break;
> 
> 
> Shouldn't we break the loop when we have received all data? I think,
> status == len should be replaced with !status. Correct me if I am wrong.

Yes, correct. I was about to replace status == len with !status when I've 
been interrupted by a phone call and then I forgot to do the work :(

I'll send a v3 this night. Unfortunately now I have to go. While at that
I'll also try to understand why 2/2 cannot apply. Sigh!
 
> Other changes look good to me, thanks

Thanks to you, Christophe and Philip for all the help you gave.

Regards,

Fabio

> With regards,
> Pavel Skripkin
> 





  reply	other threads:[~2021-08-24 15:24 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-24 14:28 [PATCH v2 0/2] staging: r8188eu: Use new usb_control_msg_recv/send() Fabio M. De Francesco
2021-08-24 14:28 ` [PATCH v2 1/2] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq() Fabio M. De Francesco
2021-08-24 14:35   ` Pavel Skripkin
2021-08-24 15:23     ` Fabio M. De Francesco [this message]
2021-08-24 22:16       ` Phillip Potter
2021-08-24 14:28 ` [PATCH 2/2] staging: r8188eu: Make some clean-ups " Fabio M. De Francesco
2021-08-24 14:39   ` Pavel Skripkin
2021-08-24 15:15     ` Fabio M. De Francesco
2021-08-24 15:26       ` Pavel Skripkin
2021-08-24 15:39         ` Fabio M. De Francesco
2021-08-24 15:43           ` Pavel Skripkin
2021-08-24 15:59             ` Fabio M. De Francesco
2021-08-24 16:04               ` Pavel Skripkin
2021-08-24 16:18                 ` Greg Kroah-Hartman
2021-08-24 16:24                   ` Pavel Skripkin
2021-08-24 22:20                   ` Phillip Potter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=10796100.lKEGA7Tnzb@localhost.localdomain \
    --to=fmdefrancesco@gmail.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=paskripkin@gmail.com \
    --cc=phil@philpotter.co.uk \
    --subject='Re: [PATCH v2 1/2] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).