Re: IO-APIC + timer doesn't work - 2.6.20-rc5 on abit KN9-Ultra bios 1.6

[Eamonn Hamilton <EAMONN.HAMILTON@saic.com>]

I've also just found bug #7820 on bugzilla which has a patch which may
address this issue from Ingo.

I'll give that a shot as well.

Cheers,
Eamonn

On Wed, 2007-01-24 at 23:21 +0800, Luming Yu wrote:
> what about acpi=off?
> 
> On 1/24/07, Eamonn Hamilton <EAMONN.HAMILTON@saic.com> wrote:
> > Hi,
> >
> > I can't get any kernel up to 2.6.20-rc5 to boot without using noapic on
> > an ABIT KN9-Ultra with a dual-core Athlon.
> >
> > I booted with apic=debug as suggested and got the following :
> >
> > ENABLING IO-APIC IRQs
> > .. TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
> > .. MP-BIOS bug: 8254 timer not connected to IO-APIC
> > ... trying to set up timer (IRQ0) through the 8252A ... failed
> > ... trying to set up timer as Virtual Wire IRQ ... failed
> > ... trying to set up timer as ExtINT IRQ ... failed :(
> >
> > The bios is the latest, although in various posts on the web it would
> > appear this occurs in older versions also.
> >
> > What can I do to help resolve this?
> >
> > Cheers,
> > Eamonn
> > --
> > Eamonn Hamilton <eamonn.hamilton@saic.com>
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.