LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: dwalker@mvista.com
Cc: Ingo Molnar <mingo@elte.hu>, Andrew Morton <akpm@osdl.org>,
	linux-kernel@vger.kernel.org
Subject: Re: 2.6.20-rc6-mm3
Date: Wed, 07 Feb 2007 15:53:50 +0100	[thread overview]
Message-ID: <1170860030.3657.9.camel@chaos> (raw)
In-Reply-To: <1170810761.3455.147.camel@dwalker1>

On Tue, 2007-02-06 at 17:12 -0800, Daniel Walker wrote:
> On Wed, 2007-02-07 at 00:36 +0100, Thomas Gleixner wrote:
> 
> > There are no other clock event devices in a PC system at the moment
> > and /proc/interrupt does not care, whether the interrupt was setup for a
> > clock event device or something else. It displays the name which is
> > given in the irqaction struct and does not care what it means. I did not
> > change the name in the IRQ#0 setup, so it still displays "timer" (which
> > can either be PIT or HPET), but this is something the interrupt layer
> > does not know and does not care about.
> 
> So your saying the "timer" entry in /proc/interrupts can be either the
> HPET timer, the PIT timer? Mine says "IO-APIC-edge" which does that map
> to? It's going though the io-apic but it's still the pit ?

IO-APIC: Input/Output Advanced Programmable Interrupt Controller. This
device does not generate interrupts by itself. Devices, which generate
interrupts are connected to it.

23:         82          0   IO-APIC-fasteoi   ohci1394, HDA Intel

This is IRQ#23 coming in via IO-APIC (fasteoi type). The interrupt is
shared by two devices, which identified themself as "ohci1394" and "HDA
Intel" via request_irq(). The interrupt originates from one of those
devices. So it _IS_ going through the IO-APIC, but generated either by
the Firewire device or the Audio device.

  0:     186222          0   IO-APIC-edge      timer

This is IRQ#0 coming in via IO-APIC (edge type). The interrupt is not
shared. The device identified itself as "timer" via setup_irq(). The
interrupt originates from this device. The interrupt is either caused by
PIT or HPET via a hardware switch mechanism, which is activated when you
use HPET. There is no way to share IRQ#0 here. It's either or as defined
by hardware magic.

	tglx




  reply	other threads:[~2007-02-07 14:53 UTC|newest]

Thread overview: 124+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-01-30  4:45 2.6.20-rc6-mm3 Andrew Morton
2007-01-30  4:50 ` 2.6.20-rc6-mm3 Jeff Garzik
2007-01-30  5:11   ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-30  9:56     ` 2.6.20-rc6-mm3 Evgeniy Polyakov
2007-01-30  8:16 ` 2.6.20-rc6-mm3 Sunil Naidu
2007-01-30  8:32   ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-30  9:06 ` 2.6.20-rc6-mm3 Olivier Galibert
2007-01-30  9:26   ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-30 18:47     ` 2.6.20-rc6-mm3 Olivier Galibert
2007-01-31  7:57     ` 2.6.20-rc6-mm3 Len Brown
2007-02-01  4:25     ` 2.6.20-rc6-mm3 Len Brown
2007-01-30 22:18 ` 2.6.20-rc6-mm3 Maciej Rutecki
2007-01-30 22:27   ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-31  0:55     ` 2.6.20-rc6-mm3 Karsten Wiese
2007-01-31 13:22       ` 2.6.20-rc6-mm3 Ingo Molnar
2007-01-31 14:25         ` 2.6.20-rc6-mm3 Karsten Wiese
2007-02-01  8:01           ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-01 10:44             ` 2.6.20-rc6-mm3 Karsten Wiese
2007-03-01 11:11               ` 2.6.20-rc6-mm3 Karsten Wiese
2007-02-03  0:37             ` 2.6.20-rc6-mm3 Pavel Machek
2007-02-01 13:03       ` [PATCH -mm] gtod persistent clock resume fix Thomas Gleixner
2007-01-31 11:54     ` 2.6.20-rc6-mm3 Maciej Rutecki
2007-02-01  4:10       ` 2.6.20-rc6-mm3 Len Brown
2007-02-01  4:17         ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-31  1:16   ` 2.6.20-rc6-mm3 Tilman Schmidt
2007-01-31  1:25     ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-31 11:38       ` 2.6.20-rc6-mm3 Tilman Schmidt
2007-01-31 12:29         ` 2.6.20-rc6-mm3 Alexey Starikovskiy
2007-01-31 16:02           ` 2.6.20-rc6-mm3 Maciej Rutecki
2007-01-31 18:28           ` 2.6.20-rc6-mm3 Tilman Schmidt
2007-01-31 21:52 ` 2.6.20-rc6-mm3 Mattia Dongili
2007-01-31 23:21   ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01 19:04     ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-01 19:36     ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-01 20:01       ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-01 21:11         ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01 22:33           ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-02 19:18             ` dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3] Mattia Dongili
2007-02-02 20:27               ` Thomas Gleixner
2007-02-02 20:43                 ` Mattia Dongili
2007-02-06 16:48                   ` Ingo Molnar
2007-02-06 19:28                     ` Mattia Dongili
2007-02-06 23:12                       ` Tilman Schmidt
2007-02-06 23:17                         ` Thomas Gleixner
2007-02-07  1:01                           ` Andrew Morton
2007-02-07 19:33                             ` Ingo Molnar
2007-02-01 21:37         ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01 20:24       ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01  0:14 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01  0:24   ` 2.6.20-rc6-mm3 Andrew Morton
2007-02-01  0:27     ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01  0:36       ` 2.6.20-rc6-mm3 Andrew Morton
2007-02-01  0:38         ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01  6:20         ` 2.6.20-rc6-mm3 David Chinner
2007-02-01  7:12           ` 2.6.20-rc6-mm3 Andrew Morton
2007-02-01 19:01             ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01 19:18               ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-01 20:18                 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01 20:26                   ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-01 23:02                     ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-05 12:02                       ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-05 12:17                         ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-05 12:56                           ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-05 18:20                             ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-05 18:34                               ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-02  4:08                 ` 2.6.20-rc6-mm3 David Chinner
2007-02-02  7:31                   ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-01 18:24 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-01 19:37   ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-01 20:29     ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-01 20:38       ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-02 14:22         ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-02 14:47           ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-02 14:50             ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-02 16:04               ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-03  7:30                 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-03  7:57                   ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-02 17:39 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 16:03 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 18:36   ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 18:45     ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 19:07       ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 19:55         ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 20:20           ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 20:40             ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 20:52               ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 20:56                 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 21:09                   ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 21:20                     ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 21:23                     ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 21:41                       ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 21:54                         ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 22:08                           ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 22:42                             ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 22:56                               ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 23:04                                 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:14                                   ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 23:22                                     ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:28                                       ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 23:35                                         ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:44                                           ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 23:51                                           ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-07  2:46                                             ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:36                                       ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-07  1:12                                         ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-07 14:53                                           ` Thomas Gleixner [this message]
2007-02-06 23:37                                       ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 22:13                           ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 21:43                       ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 21:59                         ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 21:17               ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 21:25                 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:15               ` 2.6.20-rc6-mm3 Rob Landley
2007-02-06 23:28                 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:55                   ` 2.6.20-rc6-mm3 Rob Landley
2007-02-06 22:11 ` [-mm patch] #ifdef ACPI_FUTURE_USAGE acpi_os_readable() Adrian Bunk
2007-02-06 22:12 ` [RFC: -mm patch] drivers/net/atl1/: possible cleanups Adrian Bunk
2007-02-07  0:19   ` Jay Cliburn
2007-02-07  0:22     ` Jeff Garzik
2007-02-07  0:24       ` J. K. Cliburn
2007-02-07  0:24     ` Adrian Bunk
2007-02-06 22:12 ` [-mm patch] drivers/scsi/aacraid/: cleanups Adrian Bunk
2007-02-06 22:12 ` [-mm patch] make gfs2_writepages() static Adrian Bunk
2007-02-07 10:50   ` Steven Whitehouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1170860030.3657.9.camel@chaos \
    --to=tglx@linutronix.de \
    --cc=akpm@osdl.org \
    --cc=dwalker@mvista.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --subject='Re: 2.6.20-rc6-mm3' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).