LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Michael Loeffler <zvpunry@zvpunry.de>
To: linux-kernel@vger.kernel.org
Cc: Richard Purdie <rpurdie@rpsys.net>, Kristian Kielhofner <kris@krisk.org>
Subject: [PATCH] leds: Add support for the 3rd LED on the PCEngines WRAP
Date: Thu, 27 Dec 2007 14:31:42 +0100	[thread overview]
Message-ID: <1198762302.15874.6.camel@macbook> (raw)

The 3rd LED on this board is something like a power-led, it is on all the
time. With this change to the leds-wrap driver it is possible to use this
LED too.

Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
---
Hi

I wonder why there was no support for this LED. This LED and the GPIO
line is documented in the first commit message (0d75565f) for this file.

I use this changed version for five weeks and it just works. I think this
patch can be included in 2.6.25.

bye

PS: I'm not subscribed to the lkml, so please Cc me.

 drivers/leds/leds-wrap.c |   43 +++++++++++++++++++++++++++++++++++++------
 1 files changed, 37 insertions(+), 6 deletions(-)

diff --git a/drivers/leds/leds-wrap.c b/drivers/leds/leds-wrap.c
index 27fb2d8..254e426 100644
--- a/drivers/leds/leds-wrap.c
+++ b/drivers/leds/leds-wrap.c
@@ -19,11 +19,21 @@
 #include <linux/scx200_gpio.h>
 
 #define DRVNAME "wrap-led"
+#define WRAP_POWER_LED_GPIO	2
 #define WRAP_ERROR_LED_GPIO	3
-#define	WRAP_EXTRA_LED_GPIO	18
+#define WRAP_EXTRA_LED_GPIO	18
 
 static struct platform_device *pdev;
 
+static void wrap_power_led_set(struct led_classdev *led_cdev,
+		enum led_brightness value)
+{
+	if (value)
+		scx200_gpio_set_low(WRAP_POWER_LED_GPIO);
+	else
+		scx200_gpio_set_high(WRAP_POWER_LED_GPIO);
+}
+
 static void wrap_error_led_set(struct led_classdev *led_cdev,
 		enum led_brightness value)
 {
@@ -42,6 +52,11 @@ static void wrap_extra_led_set(struct led_classdev *led_cdev,
 		scx200_gpio_set_high(WRAP_EXTRA_LED_GPIO);
 }
 
+static struct led_classdev wrap_power_led = {
+	.name		= "wrap:power",
+	.brightness_set	= wrap_power_led_set,
+};
+
 static struct led_classdev wrap_error_led = {
 	.name		= "wrap:error",
 	.brightness_set	= wrap_error_led_set,
@@ -56,6 +71,7 @@ static struct led_classdev wrap_extra_led = {
 static int wrap_led_suspend(struct platform_device *dev,
 		pm_message_t state)
 {
+	led_classdev_suspend(&wrap_power_led);
 	led_classdev_suspend(&wrap_error_led);
 	led_classdev_suspend(&wrap_extra_led);
 	return 0;
@@ -63,6 +79,7 @@ static int wrap_led_suspend(struct platform_device *dev,
 
 static int wrap_led_resume(struct platform_device *dev)
 {
+	led_classdev_resume(&wrap_power_led);
 	led_classdev_resume(&wrap_error_led);
 	led_classdev_resume(&wrap_extra_led);
 	return 0;
@@ -76,17 +93,31 @@ static int wrap_led_probe(struct platform_device *pdev)
 {
 	int ret;
 
+	ret = led_classdev_register(&pdev->dev, &wrap_power_led);
+	if (ret < 0)
+		return ret;
+
 	ret = led_classdev_register(&pdev->dev, &wrap_error_led);
-	if (ret == 0) {
-		ret = led_classdev_register(&pdev->dev, &wrap_extra_led);
-		if (ret < 0)
-			led_classdev_unregister(&wrap_error_led);
-	}
+	if (ret < 0)
+		goto err1;
+
+	ret = led_classdev_register(&pdev->dev, &wrap_extra_led);
+	if (ret < 0)
+		goto err2;
+
+	return ret;
+
+err2:
+	led_classdev_unregister(&wrap_error_led);
+err1:
+	led_classdev_unregister(&wrap_power_led);
+
 	return ret;
 }
 
 static int wrap_led_remove(struct platform_device *pdev)
 {
+	led_classdev_unregister(&wrap_power_led);
 	led_classdev_unregister(&wrap_error_led);
 	led_classdev_unregister(&wrap_extra_led);
 	return 0;
-- 
1.5.3.7.1112.g9758e



             reply	other threads:[~2007-12-27 14:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-27 13:31 Michael Loeffler [this message]
2008-01-13 23:21 ` [PATCH] leds: Add support for the 3rd LED on the PCEngines WRAP Richard Purdie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1198762302.15874.6.camel@macbook \
    --to=zvpunry@zvpunry.de \
    --cc=kris@krisk.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rpurdie@rpsys.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).