LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Kevin Lloyd <klloyd@sierrawireless.com>
To: gregkh@suse.de
Cc: linux-kernel@vger.kernel.org, linux@sierrawireless.com,
linux-usb@vger.kernel.org, linux-usb-devel@lists.sourceforge.net
Subject: [PATCH] usb-serial: Sierra driver - add devices and update dtr
Date: Thu, 10 Jan 2008 11:11:04 -0800 [thread overview]
Message-ID: <1199992265.9266.19.camel@linux-z60t> (raw)
From: Kevin Lloyd <linux@sierrawireless.com>
This patch is targeted for the 2.6.24-rc7 kernel.
The following improvements were made:
- Added new product support: MC5725, AC 880 U, MP 3G (UMTS & CDMA)
- Fixed control line issue where asserting DTR on ep5 would close ep2
- Added support for calc_num_ports (will help support future composite devices)
This also covers the devices added by j@twu.net and agilmore@wirelessbeehive.com since their patches were not committed to the 2.6.23-rc7 kernel.
Signed-off-by: Kevin Lloyd <linux@sierrawireless.com>
---
--- /home/shared/kernels/linux-2.6.24-rc7-final/drivers/usb/serial/sierra.c.orig 2008-01-09 17:37:40.000000000 -0800
+++ /home/shared/kernels/linux-2.6.24-rc7-final/drivers/usb/serial/sierra.c 2008-01-10 11:08:57.000000000 -0800
@@ -1,7 +1,7 @@
/*
USB Driver for Sierra Wireless
- Copyright (C) 2006, 2007 Kevin Lloyd <linux@sierrawireless.com>
+ Copyright (C) 2008 Kevin Lloyd <linux@sierrawireless.com>
IMPORTANT DISCLAIMER: This driver is not commercially supported by
Sierra Wireless. Use at your own risk.
@@ -14,7 +14,7 @@
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.2.5b"
+#define DRIVER_VERSION "v.1.2.7"
#define DRIVER_AUTHOR "Kevin Lloyd <linux@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
@@ -26,10 +26,12 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/usb/ch9.h>
+#define SWIMS_USB_REQUEST_SetPower 0x00
+#define SWIMS_USB_REQUEST_SetNmea 0x07
#define SWIMS_USB_REQUEST_SetMode 0x0B
-#define SWIMS_USB_REQUEST_TYPE_SetMode 0x40
-#define SWIMS_USB_INDEX_SetMode 0x0000
+#define SWIMS_USB_REQUEST_TYPE_VSC_SET 0x40
#define SWIMS_SET_MODE_Modem 0x0001
/* per port private data */
@@ -38,6 +40,8 @@
#define IN_BUFLEN 4096
static int debug;
+static int nmea = 0;
+static int truinstall = 1;
enum devicetype {
DEVICE_3_PORT = 0,
@@ -50,48 +54,90 @@ static int sierra_set_power_state(struct
int result;
dev_dbg(&udev->dev, "%s", "SET POWER STATE");
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x00, /* __u8 request */
- 0x40, /* __u8 request type */
- swiState, /* __u16 value */
- 0, /* __u16 index */
- NULL, /* void *data */
- 0, /* __u16 size */
- USB_CTRL_SET_TIMEOUT); /* int timeout */
+ SWIMS_USB_REQUEST_SetPower, /* __u8 request */
+ SWIMS_USB_REQUEST_TYPE_VSC_SET, /* __u8 request type */
+ swiState, /* __u16 value */
+ 0, /* __u16 index */
+ NULL, /* void *data */
+ 0, /* __u16 size */
+ USB_CTRL_SET_TIMEOUT); /* int timeout */
return result;
}
-static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSocMode)
+static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
{
int result;
dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH");
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetMode, /* __u8 request */
- SWIMS_USB_REQUEST_TYPE_SetMode, /* __u8 request type */
- eSocMode, /* __u16 value */
- SWIMS_USB_INDEX_SetMode, /* __u16 index */
+ SWIMS_USB_REQUEST_TYPE_VSC_SET, /* __u8 request type */
+ eSWocMode, /* __u16 value */
+ 0x0000, /* __u16 index */
NULL, /* void *data */
0, /* __u16 size */
USB_CTRL_SET_TIMEOUT); /* int timeout */
return result;
}
-static int sierra_probe(struct usb_interface *iface,
- const struct usb_device_id *id)
+int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
{
int result;
+ dev_dbg(&udev->dev, "%s", "NMEA Enable sent");
+ result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ SWIMS_USB_REQUEST_SetNmea, /* __u8 request */
+ SWIMS_USB_REQUEST_TYPE_VSC_SET, /* __u8 request type */
+ enable, /* __u16 value */
+ 0x0000, /* __u16 index */
+ NULL, /* void *data */
+ 0, /* __u16 size */
+ USB_CTRL_SET_TIMEOUT); /* int timeout */
+ return result;
+}
+
+static int sierra_calc_num_ports(struct usb_serial *serial)
+{
+ int result;
+ int *num_ports = usb_get_serial_data(serial);
+
+ result = *num_ports;
+
+ if (result) {
+ kfree(num_ports);
+ usb_set_serial_data(serial, NULL);
+ }
+
+ return result;
+}
+
+static int sierra_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ int result = 0;
struct usb_device *udev;
+ int *num_ports;
+ num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
- udev = usb_get_dev(interface_to_usbdev(iface));
+ udev = serial->dev;
/* Check if in installer mode */
- if (id->driver_info == DEVICE_INSTALLER) {
- dev_dbg(&udev->dev, "%s", "FOUND DEVICE(SW)\n");
+ if (truinstall && id->driver_info == DEVICE_INSTALLER) {
+ dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n");
result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
/*We do not want to bind to the device when in installer mode*/
return -EIO;
- }
+ } else if (id->driver_info == DEVICE_1_PORT)
+ *num_ports = 1;
+ else if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0x99)
+ *num_ports = 0;
+ else
+ *num_ports = 3;
+ /*
+ * save off our num_ports info so that we can use it in the
+ * calc_num_ports callback
+ */
+ usb_set_serial_data(serial, (void *)num_ports);
- return usb_serial_probe(iface, id);
+ return result;
}
static struct usb_device_id id_table [] = {
@@ -100,9 +146,11 @@ static struct usb_device_id id_table []
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
+ { USB_DEVICE(0x1199, 0x0023) }, /* Sierra Wireless AirCard */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
@@ -115,6 +163,11 @@ static struct usb_device_id id_table []
{ USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
{ USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */
{ USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */
+ { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */
+ { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
+
+ { USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
+ { USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
{ USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */
@@ -124,45 +177,14 @@ static struct usb_device_id id_table []
};
MODULE_DEVICE_TABLE(usb, id_table);
-static struct usb_device_id id_table_1port [] = {
- { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
- { USB_DEVICE(0x0F3D, 0x0112) }, /* AirPrime/Sierra PC 5220 */
- { }
-};
-
-static struct usb_device_id id_table_3port [] = {
- { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
- { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
- { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
- { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U*/
-
- { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
- { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
- { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
- { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
- { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
- { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/
- { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/
- { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
- { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
- { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880E */
- { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881E */
- { }
-};
-
static struct usb_driver sierra_driver = {
.name = "sierra",
- .probe = sierra_probe,
+ .probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
.no_dynamic_id = 1,
};
-
struct sierra_port_private {
spinlock_t lock; /* lock the structure */
int outstanding_urbs; /* number of out urbs in flight */
@@ -184,6 +206,7 @@ static int sierra_send_setup(struct usb_
{
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
+ __u16 interface = 0;
dbg("%s", __FUNCTION__);
@@ -196,9 +219,18 @@ static int sierra_send_setup(struct usb_
if (portdata->rts_state)
val |= 0x02;
+ /* Determine which port is targeted */
+ if (port->bulk_out_endpointAddress == 2)
+ interface = 0;
+ else if (port->bulk_out_endpointAddress == 4)
+ interface = 1;
+ else if (port->bulk_out_endpointAddress == 5)
+ interface = 2;
+
return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
- 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ 0x22, 0x21, val, interface,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
}
return 0;
@@ -582,6 +614,10 @@ static int sierra_startup(struct usb_ser
/*Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
+ /*Check NMEA and set */
+ if (nmea)
+ sierra_vsc_set_nmea(serial->dev, 1);
+
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
@@ -642,47 +678,19 @@ static void sierra_shutdown(struct usb_s
}
}
-static struct usb_serial_driver sierra_1port_device = {
+static struct usb_serial_driver sierra_device = {
.driver = {
.owner = THIS_MODULE,
.name = "sierra1",
},
- .description = "Sierra USB modem (1 port)",
- .id_table = id_table_1port,
+ .description = "Sierra USB modem",
+ .id_table = id_table,
.usb_driver = &sierra_driver,
.num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = sierra_open,
- .close = sierra_close,
- .write = sierra_write,
- .write_room = sierra_write_room,
- .chars_in_buffer = sierra_chars_in_buffer,
- .throttle = sierra_rx_throttle,
- .unthrottle = sierra_rx_unthrottle,
- .ioctl = sierra_ioctl,
- .set_termios = sierra_set_termios,
- .break_ctl = sierra_break_ctl,
- .tiocmget = sierra_tiocmget,
- .tiocmset = sierra_tiocmset,
- .attach = sierra_startup,
- .shutdown = sierra_shutdown,
- .read_int_callback = sierra_instat_callback,
-};
-
-static struct usb_serial_driver sierra_3port_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "sierra3",
- },
- .description = "Sierra USB modem (3 port)",
- .id_table = id_table_3port,
- .usb_driver = &sierra_driver,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = 3,
- .num_bulk_out = 3,
- .num_ports = 3,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .calc_num_ports = sierra_calc_num_ports,
+ .probe = sierra_probe,
.open = sierra_open,
.close = sierra_close,
.write = sierra_write,
@@ -704,12 +712,9 @@ static struct usb_serial_driver sierra_3
static int __init sierra_init(void)
{
int retval;
- retval = usb_serial_register(&sierra_1port_device);
- if (retval)
- goto failed_1port_device_register;
- retval = usb_serial_register(&sierra_3port_device);
+ retval = usb_serial_register(&sierra_device);
if (retval)
- goto failed_3port_device_register;
+ goto failed_device_register;
retval = usb_register(&sierra_driver);
@@ -721,18 +726,15 @@ static int __init sierra_init(void)
return 0;
failed_driver_register:
- usb_serial_deregister(&sierra_3port_device);
-failed_3port_device_register:
- usb_serial_deregister(&sierra_1port_device);
-failed_1port_device_register:
+ usb_serial_deregister(&sierra_device);
+failed_device_register:
return retval;
}
static void __exit sierra_exit(void)
{
usb_deregister (&sierra_driver);
- usb_serial_deregister(&sierra_1port_device);
- usb_serial_deregister(&sierra_3port_device);
+ usb_serial_deregister(&sierra_device);
}
module_init(sierra_init);
@@ -743,6 +745,12 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
+module_param(truinstall, bool, 0);
+MODULE_PARM_DESC(truinstall, "TRU-Install support");
+
+module_param(nmea, bool, 0);
+MODULE_PARM_DESC(nmea, "NMEA streaming");
+
#ifdef CONFIG_USB_DEBUG
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug messages");
next reply other threads:[~2008-01-10 19:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-10 19:11 Kevin Lloyd [this message]
2008-01-10 19:54 ` [PATCH] usb-serial: Sierra driver - add devices and update dtr Greg KH
2008-01-11 17:24 ` Kevin Lloyd
2008-01-11 21:02 ` Greg KH
2008-01-14 17:21 ` Kevin Lloyd
2008-01-17 18:04 ` Greg KH
2008-01-17 23:15 ` Kevin Lloyd
2008-01-19 0:35 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1199992265.9266.19.camel@linux-z60t \
--to=klloyd@sierrawireless.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
--cc=linux-usb@vger.kernel.org \
--cc=linux@sierrawireless.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).