LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Borislav Petkov <petkovbb@googlemail.com>
To: <bzolnier@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 11/22] ide-tape: remove atomic test/set macros
Date: Mon,  4 Feb 2008 14:40:29 +0100	[thread overview]
Message-ID: <1202132440-26648-12-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1202132440-26648-1-git-send-email-petkovbb@gmail.com>

Also remove flag IDETAPE_READ_ERROR since it is unused.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  226 +++++++++++++++++++++++++----------------------
 1 files changed, 120 insertions(+), 106 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4fee160..1c4f94c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -207,24 +207,24 @@ typedef struct idetape_packet_command_s {
 	u8 *current_position;			/* Pointer into the above buffer */
 	ide_startstop_t (*callback) (ide_drive_t *);	/* Called when this packet command is completed */
 	u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];	/* Temporary buffer */
-	unsigned long flags;			/* Status/Action bit flags: long for set_bit */
+	unsigned int flags;
 } idetape_pc_t;
 
-/*
- *	Packet command flag bits.
- */
-/* Set when an error is considered normal - We won't retry */
-#define	PC_ABORT			0
-/* 1 When polling for DSC on a media access command */
-#define PC_WAIT_FOR_DSC			1
-/* 1 when we prefer to use DMA if possible */
-#define PC_DMA_RECOMMENDED		2
-/* 1 while DMA in progress */
-#define	PC_DMA_IN_PROGRESS		3
-/* 1 when encountered problem during DMA */
-#define	PC_DMA_ERROR			4
-/* Data direction */
-#define	PC_WRITING			5
+/* Packet command flag bits. */
+enum {
+	/* Set when an error is considered normal - We won't retry */
+	PC_FL_ABORT		= (1 << 0),
+	/* 1 When polling for DSC on a media access command */
+	PC_FL_WAIT_FOR_DSC	= (1 << 1),
+	/* 1 when we prefer to use DMA if possible */
+	PC_FL_DMA_RECOMMENDED	= (1 << 2),
+	/* 1 while DMA in progress */
+	PC_FL_DMA_IN_PROGRESS	= (1 << 3),
+	/* 1 when encountered problem during DMA */
+	PC_FL_DMA_ERROR		= (1 << 4),
+	/* Data direction */
+	PC_FL_WRITING		= (1 <<	5),
+};
 
 /*
  *	A pipeline stage.
@@ -354,8 +354,7 @@ typedef struct ide_tape_obj {
 	/* Wasted space in each stage */
 	int excess_bh_size;
 
-	/* Status/Action flags: long for set_bit */
-	unsigned long flags;
+	unsigned int flags;
 	/* protects the ide-tape queue */
 	spinlock_t lock;
 
@@ -458,20 +457,26 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 #define DOOR_LOCKED			1
 #define DOOR_EXPLICITLY_LOCKED		2
 
-/*
- *	Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC		0
-#define IDETAPE_ADDRESS_VALID		1	/* 0 When the tape position is unknown */
-#define IDETAPE_BUSY			2	/* Device already opened */
-#define IDETAPE_PIPELINE_ERROR		3	/* Error detected in a pipeline stage */
-#define IDETAPE_DETECT_BS		4	/* Attempt to auto-detect the current user block size */
-#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
-#define IDETAPE_READ_ERROR		7
-#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT		9
+/* Tape flag bits values. */
+enum {
+	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
+	/* 0 When the tape position is unknown */
+	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
+	/* Device already opened */
+	IDETAPE_FL_BUSY			= (1 << 2),
+	/* Error detected in a pipeline stage */
+	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
+	/* Attempt to auto-detect the current user block size */
+	IDETAPE_FL_DETECT_BS		= (1 << 4),
+	/* Currently on a filemark */
+	IDETAPE_FL_FILEMARK		= (1 << 5),
+	/* DRQ interrupt device */
+	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
+	/* pipeline active */
+	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
+};
 
 /*
  *	Some defines for the READ BUFFER command
@@ -627,7 +632,7 @@ static void idetape_update_buffers (idetape_pc_t *pc)
 	int count;
 	unsigned int bcount = pc->actually_transferred;
 
-	if (test_bit(PC_WRITING, &pc->flags))
+	if (pc->flags & PC_FL_WRITING)
 		return;
 	while (bcount) {
 		if (bh == NULL) {
@@ -703,8 +708,8 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
-	/* Correct pc->actually_transferred by asking the tape.	 */
-	if (test_bit(PC_DMA_ERROR, &pc->flags)) {
+	/* Correct pc->actually_transferred by asking the tape. */
+	if (pc->flags & PC_FL_DMA_ERROR) {
 		pc->actually_transferred = pc->request_transfer -
 			tape->blk_size *
 			be32_to_cpu(get_unaligned((u32 *)&sense[3]));
@@ -723,27 +728,26 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 			/* don't report an error, everything's ok */
 			pc->error = 0;
 			/* don't retry read/write */
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
 		pc->error = IDETAPE_ERROR_FILEMARK;
-		set_bit(PC_ABORT, &pc->flags);
+		pc->flags |= PC_FL_ABORT;
 	}
 	if (pc->c[0] == WRITE_6) {
 		if ((sense[2] & 0x40) || (tape->sense_key == 0xd
 		     && tape->asc == 0x0 && tape->ascq == 0x2)) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
 		if (tape->sense_key == 8) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
-		if (!test_bit(PC_ABORT, &pc->flags) &&
-		    pc->actually_transferred)
+		if (!(pc->flags & PC_FL_ABORT) && pc->actually_transferred)
 			pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
 	}
 }
@@ -899,13 +903,13 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 		if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
 			remove_stage = 1;
 			if (error) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				tape->flags |= IDETAPE_FL_PIPELINE_ERR;
 				if (error == IDETAPE_ERROR_EOD)
 					idetape_abort_pipeline(drive, active_stage);
 			}
 		} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
 			if (error == IDETAPE_ERROR_EOD) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				tape->flags |= IDETAPE_FL_PIPELINE_ERR;
 				idetape_abort_pipeline(drive, active_stage);
 			}
 		}
@@ -943,7 +947,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 	if (remove_stage)
 		idetape_remove_stage_head(drive);
 	if (tape->active_data_rq == NULL)
-		clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ACTIVE;
 	spin_unlock_irqrestore(&tape->lock, flags);
 	return 0;
 }
@@ -1028,7 +1032,7 @@ static ide_startstop_t idetape_retry_pc(ide_drive_t *drive)
 	}
 
 	idetape_create_request_sense_cmd(pc);
-	set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+	tape->flags |= IDETAPE_FL_IGNORE_DSC;
 	idetape_queue_pc_head(drive, pc, rq);
 	return ide_stopped;
 }
@@ -1077,7 +1081,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 	/* Clear the interrupt */
 	stat = hwif->INB(IDE_STATUS_REG);
 
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
 		if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
 			/*
 			 * A DMA error is sometimes expected. For example,
@@ -1100,7 +1104,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			 * data transfer will occur, but no DMA error.
 			 * (AS, 19 Apr 2001)
 			 */
-			set_bit(PC_DMA_ERROR, &pc->flags);
+			pc->flags |= PC_FL_DMA_ERROR;
 		} else {
 			pc->actually_transferred = pc->request_transfer;
 			idetape_update_buffers(pc);
@@ -1114,7 +1118,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		debug_log(DBG_SENSE, "Packet command completed, %d bytes"
 				" transferred\n", pc->actually_transferred);
 
-		clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+		pc->flags &= ~PC_FL_DMA_IN_PROGRESS;
 		local_irq_enable();
 
 #if SIMULATE_ERRORS
@@ -1127,7 +1131,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 #endif
 		if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
 			stat &= ~ERR_STAT;
-		if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+		if ((stat & ERR_STAT) || (pc->flags & PC_FL_DMA_ERROR)) {
 			/* Error detected */
 			debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
 
@@ -1143,8 +1147,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			return idetape_retry_pc(drive);
 		}
 		pc->error = 0;
-		if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) &&
-		    (stat & SEEK_STAT) == 0) {
+		if ((pc->flags & PC_FL_WAIT_FOR_DSC) &&
+				(stat & SEEK_STAT) == 0) {
 			/* Media access command */
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
@@ -1158,7 +1162,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		/* Command finished - Call the callback function */
 		return pc->callback(drive);
 	}
-	if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
+		pc->flags &= ~PC_FL_DMA_IN_PROGRESS;
 		printk(KERN_ERR "ide-tape: The tape wants to issue more "
 				"interrupts in DMA mode\n");
 		printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
@@ -1175,7 +1180,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
 		return ide_do_reset(drive);
 	}
-	if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
+	if (((ireason & IO) == IO) == !!(pc->flags & PC_FL_WRITING)) {
 		/* Hopefully, we will never get here */
 		printk(KERN_ERR "ide-tape: We wanted to %s, ",
 				(ireason & IO) ? "Write" : "Read");
@@ -1183,7 +1188,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 				(ireason & IO) ? "Read" : "Write");
 		return ide_do_reset(drive);
 	}
-	if (!test_bit(PC_WRITING, &pc->flags)) {
+	if (!(pc->flags & PC_FL_WRITING)) {
 		/* Reading - Check that we have enough space */
 		temp = pc->actually_transferred + bcount;
 		if (temp > pc->request_transfer) {
@@ -1300,7 +1305,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 	ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	/* Begin DMA, if necessary */
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags))
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS)
 		hwif->dma_start(drive);
 #endif
 	/* Send the actual packet */
@@ -1326,14 +1331,13 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	/* Set the current packet command */
 	tape->pc = pc;
 
-	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
-	    test_bit(PC_ABORT, &pc->flags)) {
+	if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FL_ABORT)) {
 		/*
 		 *	We will "abort" retrying a packet command in case
 		 *	a legitimate error code was received (crossing a
 		 *	filemark, or end of the media, for example).
 		 */
-		if (!test_bit(PC_ABORT, &pc->flags)) {
+		if (!(pc->flags & PC_FL_ABORT)) {
 			if (!(pc->c[0] == TEST_UNIT_READY &&
 			      tape->sense_key == 2 && tape->asc == 4 &&
 			     (tape->ascq == 1 || tape->ascq == 8))) {
@@ -1359,20 +1363,21 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	/* Request to transfer the entire buffer at once */
 	bcount = pc->request_transfer;
 
-	if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_ERROR) {
+		pc->flags &= ~PC_FL_DMA_ERROR;
 		printk(KERN_WARNING "ide-tape: DMA disabled, "
 				"reverting to PIO\n");
 		ide_dma_off(drive);
 	}
-	if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+	if ((pc->flags & PC_FL_DMA_RECOMMENDED) && drive->using_dma)
 		dma_ok = !hwif->dma_setup(drive);
 
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
 			   IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
 
 	if (dma_ok)			/* Will begin DMA later */
-		set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
-	if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) {
+		pc->flags |= PC_FL_DMA_IN_PROGRESS;
+	if (tape->flags & IDETAPE_FL_DRQ_INTERRUPT) {
 		ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc,
 				    IDETAPE_WAIT_CMD, NULL);
 		return ide_started;
@@ -1542,7 +1547,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi
 	pc->buffer_size		= length * tape->blk_size;
 	pc->request_transfer	= length * tape->blk_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
 static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
@@ -1573,7 +1578,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
 	pc->callback = &idetape_rw_callback;
-	set_bit(PC_WRITING, &pc->flags);
+	pc->flags |= PC_FL_WRITING;
 	pc->bh = bh;
 	pc->b_data = bh->b_data;
 	pc->b_count = atomic_read(&bh->b_count);
@@ -1581,7 +1586,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
 	pc->request_transfer	= length * tape->blk_size;
 	pc->buffer_size		= length * tape->blk_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
 /*
@@ -1633,18 +1638,18 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	stat = drive->hwif->INB(IDE_STATUS_REG);
 
 	if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		tape->flags |= IDETAPE_FL_IGNORE_DSC;
 
 	if (drive->post_reset == 1) {
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		tape->flags |= IDETAPE_FL_IGNORE_DSC;
 		drive->post_reset = 0;
 	}
 
 	if (time_after(jiffies, tape->insert_time))
 		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
 	idetape_calculate_speeds(drive);
-	if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
-	    (stat & SEEK_STAT) == 0) {
+	if ((tape->flags & IDETAPE_FL_IGNORE_DSC) && (stat & SEEK_STAT) == 0) {
+		tape->flags &= ~IDETAPE_FL_IGNORE_DSC;
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = tape->best_dsc_rw_freq;
@@ -1722,7 +1727,7 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape)
 {
 	int rc1, rc2;
 
-	rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+	rc1 = !!(tape->flags & IDETAPE_FL_PIPELINE_ACTIVE);
 	rc2 = (tape->active_data_rq != NULL);
 	return rc1;
 }
@@ -1960,7 +1965,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					"to the tape\n");
 
-			clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_ADDRESS_VALID;
 			idetape_end_request(drive, 0, 0);
 		} else {
 			debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -1969,7 +1974,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 			tape->partition = readpos[1];
 			tape->first_frame =
 				be32_to_cpu(*(u32 *)&readpos[4]);
-			set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			tape->flags |= IDETAPE_FL_ADDRESS_VALID;
 			idetape_end_request(drive, 1, 0);
 		}
 	} else {
@@ -1991,7 +1996,7 @@ static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_FILEMARKS;
 	pc->c[4] = write_filemark;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2038,7 +2043,7 @@ static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc
 	idetape_init_pc(pc);
 	pc->c[0] = START_STOP;
 	pc->c[4] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2051,7 +2056,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	/*
 	 * Wait for the tape to become ready
 	 */
-	set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+	tape->flags |= IDETAPE_FL_MEDIUM_PRESENT;
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		idetape_create_test_unit_ready_cmd(&pc);
@@ -2120,7 +2125,7 @@ static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, uns
 	pc->c[1] = 2;
 	put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
 	pc->c[8] = partition;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2150,8 +2155,11 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 
 	/* Remove merge stage. */
 	cnt = tape->merge_stage_size / tape->blk_size;
-	if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
-		++cnt;		/* Filemarks count as 1 sector */
+	if (tape->flags & IDETAPE_FL_FILEMARK) {
+		tape->flags &= ~IDETAPE_FL_FILEMARK;
+		/* Filemarks count as 1 sector */
+		++cnt;
+	}
 	tape->merge_stage_size = 0;
 	if (tape->merge_stage != NULL) {
 		__idetape_kfree_stage(tape->merge_stage);
@@ -2159,7 +2167,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 	}
 
 	/* Clear pipeline flags. */
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/* Remove pipeline stages. */
@@ -2271,7 +2279,7 @@ static void idetape_plug_pipeline(ide_drive_t *drive)
 	if (tape->next_stage == NULL)
 		return;
 	if (!idetape_pipeline_active(tape)) {
-		set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		tape->flags |= IDETAPE_FL_PIPELINE_ACTIVE;
 		idetape_activate_next_stage(drive);
 		(void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
 	}
@@ -2289,7 +2297,7 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = REZERO_UNIT;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2298,7 +2306,7 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc)
 	idetape_init_pc(pc);
 	pc->c[0] = ERASE;
 	pc->c[1] = 1;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2308,7 +2316,7 @@ static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
 	pc->c[0] = SPACE;
 	put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
 	pc->c[1] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2396,9 +2404,11 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 			idetape_plug_pipeline(drive);
 		}
 	}
-	if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+	if (tape->flags & IDETAPE_FL_PIPELINE_ERR) {
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 		/* Return a deferred error */
 		return -EIO;
+	}
 	return blocks;
 }
 
@@ -2469,7 +2479,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 		__idetape_kfree_stage(tape->merge_stage);
 		tape->merge_stage = NULL;
 	}
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/*
@@ -2549,8 +2559,8 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 	idetape_init_rq(&rq, REQ_IDETAPE_READ);
 	rq.sector = tape->first_frame;
 	rq.nr_sectors = rq.current_nr_sectors = blocks;
-	if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
-	    tape->nr_stages < max_stages) {
+	if (!(tape->flags & IDETAPE_FL_PIPELINE_ERR) &&
+			tape->nr_stages < max_stages) {
 		new_stage = idetape_kmalloc_stage(tape);
 		while (new_stage != NULL) {
 			new_stage->rq = rq;
@@ -2589,7 +2599,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	/*
 	 * If we are at a filemark, return a read length of 0
 	 */
-	if (test_bit(IDETAPE_FILEMARK, &tape->flags))
+	if (tape->flags & IDETAPE_FL_FILEMARK)
 		return 0;
 
 	/*
@@ -2598,7 +2608,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	 */
 	idetape_init_read(drive, tape->max_stages);
 	if (tape->first_stage == NULL) {
-		if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+		if (tape->flags & IDETAPE_FL_PIPELINE_ERR)
 			return 0;
 		return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
 					tape->merge_stage->bh);
@@ -2615,7 +2625,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	else {
 		idetape_switch_buffers(tape, tape->first_stage);
 		if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
-			set_bit(IDETAPE_FILEMARK, &tape->flags);
+			tape->flags |= IDETAPE_FL_FILEMARK;
 		spin_lock_irqsave(&tape->lock, flags);
 		idetape_remove_stage_head(drive);
 		spin_unlock_irqrestore(&tape->lock, flags);
@@ -2769,12 +2779,14 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 		 *	filemarks.
 		 */
 		tape->merge_stage_size = 0;
-		if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
+		if (tape->flags & IDETAPE_FL_FILEMARK) {
+			tape->flags &= ~IDETAPE_FL_FILEMARK;
 			++count;
+		}
 		while (tape->first_stage != NULL) {
 			if (count == mt_count) {
 				if (mt_op == MTFSFM)
-					set_bit(IDETAPE_FILEMARK, &tape->flags);
+					tape->flags |= IDETAPE_FL_FILEMARK;
 				return 0;
 			}
 			spin_lock_irqsave(&tape->lock, flags);
@@ -2854,7 +2866,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
+		if (tape->flags & IDETAPE_FL_DETECT_BS)
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
@@ -2893,7 +2905,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 		tape->merge_stage_size = bytes_read-temp;
 	}
 finish:
-	if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) {
+	if (!actually_read && (tape->flags & IDETAPE_FL_FILEMARK)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -3077,7 +3089,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK);
 			retval = idetape_queue_pc_tail(drive, &pc);
 			if (!retval)
-				clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+				tape->flags &= ~IDETAPE_FL_MEDIUM_PRESENT;
 			return retval;
 		case MTNOP:
 			idetape_discard_read_pipeline(drive, 0);
@@ -3100,9 +3112,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 					return -EIO;
 				tape->user_bs_factor = mt_count /
 							tape->blk_size;
-				clear_bit(IDETAPE_DETECT_BS, &tape->flags);
+				tape->flags &= ~IDETAPE_FL_DETECT_BS;
 			} else
-				set_bit(IDETAPE_DETECT_BS, &tape->flags);
+				tape->flags |= IDETAPE_FL_DETECT_BS;
 			return 0;
 		case MTSEEK:
 			idetape_discard_read_pipeline(drive, 0);
@@ -3227,7 +3239,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	ide_drive_t *drive;
 	idetape_tape_t *tape;
 	idetape_pc_t pc;
-	int retval;
+	int retval, testval;
 
 	if (i >= MAX_HWIFS * MAX_DRIVES)
 		return -ENXIO;
@@ -3249,24 +3261,26 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDETAPE_BUSY, &tape->flags)) {
+	testval = tape->flags & IDETAPE_FL_BUSY;
+	tape->flags |= IDETAPE_FL_BUSY;
+	if (testval) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDETAPE_BUSY, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_BUSY;
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags))
+	if (!(tape->flags & IDETAPE_FL_ADDRESS_VALID))
 		(void)idetape_rewind_tape(drive);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
-		clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 
 	/* Read block size and write protect status from drive. */
 	ide_tape_get_bsize_from_bdesc(drive);
@@ -3281,7 +3295,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDETAPE_BUSY, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_BUSY;
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -3351,7 +3365,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 		__idetape_kfree_stage(tape->cache_stage);
 		tape->cache_stage = NULL;
 	}
-	if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags))
+	if (minor < 128 && (tape->flags & IDETAPE_FL_MEDIUM_PRESENT))
 		(void) idetape_rewind_tape(drive);
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
@@ -3361,7 +3375,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 			}
 		}
 	}
-	clear_bit(IDETAPE_BUSY, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_BUSY;
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -3550,7 +3564,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	tape->speed_control = 1;
 	*((unsigned short *) &gcw) = drive->id->config;
 	if (gcw.drq_type == 1)
-		set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
+		tape->flags |= IDETAPE_FL_DRQ_INTERRUPT;
 
 	tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
 	
-- 
1.5.3.7


  parent reply	other threads:[~2008-02-04 13:46 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-04 13:40 Borislav Petkov
2008-02-04 13:40 ` [PATCH 01/22] ide-tape: refactor the debug logging facility Borislav Petkov
2008-02-04 13:40 ` [PATCH 02/22] ide-tape: remove struct idetape_read_position_result_t Borislav Petkov
2008-02-05  1:23   ` Bartlomiej Zolnierkiewicz
2008-02-04 13:40 ` [PATCH 03/22] ide-tape: remove unreachable code chunk Borislav Petkov
2008-02-04 13:40 ` [PATCH 04/22] ide-tape: simplify code branching in the interrupt handler Borislav Petkov
2008-02-04 13:40 ` [PATCH 05/22] ide-tape: remove typedef idetape_chrdev_direction_t Borislav Petkov
2008-02-04 13:40 ` [PATCH 06/22] ide-tape: struct idetape_tape_t: remove unused members Borislav Petkov
2008-09-22 13:25   ` Sergei Shtylyov
2008-09-22 13:58     ` Boris Petkov
2008-09-22 15:50       ` Sergei Shtylyov
2008-02-04 13:40 ` [PATCH 07/22] ide-tape: struct idetape_tape_t: shorten member names v2 Borislav Petkov
2008-02-05  1:23   ` Bartlomiej Zolnierkiewicz
2008-02-05  4:47     ` Borislav Petkov
2008-02-04 13:40 ` [PATCH 08/22] ide-tape: remove packet command and struct request memory buffers Borislav Petkov
2008-02-04 13:40 ` [PATCH 09/22] ide-tape: remove idetape_increase_max_pipeline_stages() Borislav Petkov
2008-02-04 13:40 ` [PATCH 10/22] ide-tape: shorten some function names Borislav Petkov
2008-02-04 13:40 ` Borislav Petkov [this message]
2008-02-04 13:40 ` [PATCH 12/22] ide-tape: dump gcw fields on error in idetape_identify_device() Borislav Petkov
2008-02-04 13:40 ` [PATCH 13/22] ide-tape: remove struct idetape_id_gcw Borislav Petkov
2008-02-04 13:40 ` [PATCH 14/22] ide-tape: cleanup and fix comments Borislav Petkov
2008-02-05  1:27   ` Bartlomiej Zolnierkiewicz
2008-02-04 13:40 ` [PATCH 15/22] ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd() Borislav Petkov
2008-02-04 13:40 ` [PATCH 16/22] ide-tape: include proper headers Borislav Petkov
2008-02-04 13:40 ` [PATCH 17/22] ide-tape: collect module-related macro calls at the end Borislav Petkov
2008-02-04 13:40 ` [PATCH 18/22] ide-tape: remove leftover OnStream support warning Borislav Petkov
2008-02-04 13:40 ` [PATCH 19/22] ide-tape: fix syntax error in idetape_identify_device() Borislav Petkov
2008-02-04 13:40 ` [PATCH 20/22] ide-tape: cleanup the remaining codestyle issues Borislav Petkov
2008-02-05  1:27   ` Bartlomiej Zolnierkiewicz
2008-02-04 13:40 ` [PATCH 21/22] ide-tape: bump minor driver version Borislav Petkov
2008-02-04 13:40 ` [PATCH 22/22] ide-tape: schedule driver for removal after 6 months in case it turns out Borislav Petkov
2008-02-05  1:20 ` ide-tape redux (was: Bartlomiej Zolnierkiewicz
2008-02-06  5:23   ` Borislav Petkov
2008-02-06  5:27     ` Borislav Petkov
2008-02-09 16:25       ` Bartlomiej Zolnierkiewicz
2008-02-09 19:42         ` [PATCH 1/2] ide-tape: move all struct and other defs at the top Borislav Petkov
2008-02-11 22:12           ` Bartlomiej Zolnierkiewicz
2008-02-09 16:25     ` ide-tape redux (was: Bartlomiej Zolnierkiewicz
2008-02-09 19:43       ` [PATCH 2/2] ide-tape: remove atomic test/set macros for packet commands Borislav Petkov
2008-02-11 22:12         ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1202132440-26648-12-git-send-email-petkovbb@gmail.com \
    --to=petkovbb@googlemail.com \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkovbb@gmail.com \
    --subject='Re: [PATCH 11/22] ide-tape: remove atomic test/set macros' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).