LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] char: make functions static in synclinkmp.c
@ 2008-02-20 21:56 Harvey Harrison
  0 siblings, 0 replies; only message in thread
From: Harvey Harrison @ 2008-02-20 21:56 UTC (permalink / raw)
  To: Andrew Morton; +Cc: LKML

All were forward declared with static.

Fixes sparse warnings:
drivers/char/synclinkmp.c:1476:5: warning: symbol 'read_proc' was not declared. Should it be static?
drivers/char/synclinkmp.c:2027:5: warning: symbol 'bh_action' was not declared. Should it be static?
drivers/char/synclinkmp.c:2058:6: warning: symbol 'bh_handler' was not declared. Should it be static?
drivers/char/synclinkmp.c:2103:6: warning: symbol 'bh_receive' was not declared. Should it be static?
drivers/char/synclinkmp.c:2112:6: warning: symbol 'bh_transmit' was not declared. Should it be static?
drivers/char/synclinkmp.c:2124:6: warning: symbol 'bh_status' was not declared. Should it be static?
drivers/char/synclinkmp.c:2136:6: warning: symbol 'isr_timer' was not declared. Should it be static?
drivers/char/synclinkmp.c:2162:6: warning: symbol 'isr_rxint' was not declared. Should it be static?
drivers/char/synclinkmp.c:2221:6: warning: symbol 'isr_rxrdy' was not declared. Should it be static?
drivers/char/synclinkmp.c:2351:6: warning: symbol 'isr_txint' was not declared. Should it be static?
drivers/char/synclinkmp.c:2379:6: warning: symbol 'isr_txrdy' was not declared. Should it be static?
drivers/char/synclinkmp.c:2410:6: warning: symbol 'isr_rxdmaok' was not declared. Should it be static?
drivers/char/synclinkmp.c:2427:6: warning: symbol 'isr_rxdmaerror' was not declared. Should it be static?
drivers/char/synclinkmp.c:2445:6: warning: symbol 'isr_txdmaok' was not declared. Should it be static?
drivers/char/synclinkmp.c:2463:6: warning: symbol 'isr_txdmaerror' was not declared. Should it be static?
drivers/char/synclinkmp.c:2480:6: warning: symbol 'isr_io_pin' was not declared. Should it be static?
drivers/char/synclinkmp.c:3420:5: warning: symbol 'alloc_dma_bufs' was not declared. Should it be static?
drivers/char/synclinkmp.c:3494:5: warning: symbol 'alloc_buf_list' was not declared. Should it be static?
drivers/char/synclinkmp.c:3553:5: warning: symbol 'alloc_frame_bufs' was not declared. Should it be static?
drivers/char/synclinkmp.c:3570:6: warning: symbol 'free_dma_bufs' was not declared. Should it be static?
drivers/char/synclinkmp.c:3580:5: warning: symbol 'alloc_tmp_rx_buf' was not declared. Should it be static?
drivers/char/synclinkmp.c:3588:6: warning: symbol 'free_tmp_rx_buf' was not declared. Should it be static?
drivers/char/synclinkmp.c:3594:5: warning: symbol 'claim_resources' was not declared. Should it be static?
drivers/char/synclinkmp.c:3681:6: warning: symbol 'release_resources' was not declared. Should it be static?
drivers/char/synclinkmp.c:3737:6: warning: symbol 'add_device' was not declared. Should it be static?
drivers/char/synclinkmp.c:3860:6: warning: symbol 'device_init' was not declared. Should it be static?
drivers/char/synclinkmp.c:4054:6: warning: symbol 'enable_loopback' was not declared. Should it be static?
drivers/char/synclinkmp.c:4101:6: warning: symbol 'set_rate' was not declared. Should it be static?
drivers/char/synclinkmp.c:4147:6: warning: symbol 'rx_stop' was not declared. Should it be static?
drivers/char/synclinkmp.c:4168:6: warning: symbol 'rx_start' was not declared. Should it be static?
drivers/char/synclinkmp.c:4225:6: warning: symbol 'tx_start' was not declared. Should it be static?
drivers/char/synclinkmp.c:4295:6: warning: symbol 'tx_stop' was not declared. Should it be static?
drivers/char/synclinkmp.c:4322:6: warning: symbol 'tx_load_fifo' was not declared. Should it be static?
drivers/char/synclinkmp.c:4371:6: warning: symbol 'reset_port' was not declared. Should it be static?
drivers/char/synclinkmp.c:4395:6: warning: symbol 'reset_adapter' was not declared. Should it be static?
drivers/char/synclinkmp.c:4407:6: warning: symbol 'async_mode' was not declared. Should it be static?
drivers/char/synclinkmp.c:4546:6: warning: symbol 'hdlc_mode' was not declared. Should it be static?
drivers/char/synclinkmp.c:4748:6: warning: symbol 'tx_set_idle' was not declared. Should it be static?
drivers/char/synclinkmp.c:4768:6: warning: symbol 'get_signals' was not declared. Should it be static?
drivers/char/synclinkmp.c:4797:6: warning: symbol 'set_signals' was not declared. Should it be static?
drivers/char/synclinkmp.c:4826:6: warning: symbol 'rx_reset_buffers' was not declared. Should it be static?
drivers/char/synclinkmp.c:4837:6: warning: symbol 'rx_free_frame_buffers' was not declared. Should it be static?
drivers/char/synclinkmp.c:4865:5: warning: symbol 'rx_get_frame' was not declared. Should it be static?
drivers/char/synclinkmp.c:5040:6: warning: symbol 'tx_load_dma_buffer' was not declared. Should it be static?
drivers/char/synclinkmp.c:5080:5: warning: symbol 'register_test' was not declared. Should it be static?
drivers/char/synclinkmp.c:5119:5: warning: symbol 'irq_test' was not declared. Should it be static?
drivers/char/synclinkmp.c:5211:5: warning: symbol 'init_adapter' was not declared. Should it be static?
drivers/char/synclinkmp.c:5270:5: warning: symbol 'loopback_test' was not declared. Should it be static?
drivers/char/synclinkmp.c:5335:5: warning: symbol 'adapter_test' was not declared. Should it be static?
drivers/char/synclinkmp.c:5397:5: warning: symbol 'memory_test' was not declared. Should it be static?
drivers/char/synclinkmp.c:5449:6: warning: symbol 'load_pci_memory' was not declared. Should it be static?
drivers/char/synclinkmp.c:5468:6: warning: symbol 'trace_block' was not declared. Should it be static?
drivers/char/synclinkmp.c:5503:6: warning: symbol 'tx_timeout' was not declared. Should it be static?
drivers/char/synclinkmp.c:5530:6: warning: symbol 'status_timeout' was not declared. Should it be static?
drivers/char/synclinkmp.c:5581:15: warning: symbol 'read_reg' was not declared. Should it be static?
drivers/char/synclinkmp.c:5586:6: warning: symbol 'write_reg' was not declared. Should it be static?
drivers/char/synclinkmp.c:5592:5: warning: symbol 'read_reg16' was not declared. Should it be static?
drivers/char/synclinkmp.c:5598:6: warning: symbol 'write_reg16' was not declared. Should it be static?
drivers/char/synclinkmp.c:5604:15: warning: symbol 'read_status_reg' was not declared. Should it be static?
drivers/char/synclinkmp.c:5610:6: warning: symbol 'write_control_reg' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
 drivers/char/synclinkmp.c |  120 ++++++++++++++++++++++----------------------
 1 files changed, 60 insertions(+), 60 deletions(-)

diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index f3e7807..c662810 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -1473,7 +1473,7 @@ static inline int line_info(char *buf, SLMP_INFO *info)
 
 /* Called to print information about devices
  */
-int read_proc(char *page, char **start, off_t off, int count,
+static int read_proc(char *page, char **start, off_t off, int count,
 	      int *eof, void *data)
 {
 	int len = 0, l;
@@ -2024,7 +2024,7 @@ static void hdlcdev_exit(SLMP_INFO *info)
 /* Return next bottom half action to perform.
  * Return Value:	BH action code or 0 if nothing to do.
  */
-int bh_action(SLMP_INFO *info)
+static int bh_action(SLMP_INFO *info)
 {
 	unsigned long flags;
 	int rc = 0;
@@ -2055,7 +2055,7 @@ int bh_action(SLMP_INFO *info)
 
 /* Perform bottom half processing of work items queued by ISR.
  */
-void bh_handler(struct work_struct *work)
+static void bh_handler(struct work_struct *work)
 {
 	SLMP_INFO *info = container_of(work, SLMP_INFO, task);
 	int action;
@@ -2100,7 +2100,7 @@ void bh_handler(struct work_struct *work)
 			__FILE__,__LINE__,info->device_name);
 }
 
-void bh_receive(SLMP_INFO *info)
+static void bh_receive(SLMP_INFO *info)
 {
 	if ( debug_level >= DEBUG_LEVEL_BH )
 		printk( "%s(%d):%s bh_receive()\n",
@@ -2109,7 +2109,7 @@ void bh_receive(SLMP_INFO *info)
 	while( rx_get_frame(info) );
 }
 
-void bh_transmit(SLMP_INFO *info)
+static void bh_transmit(SLMP_INFO *info)
 {
 	struct tty_struct *tty = info->tty;
 
@@ -2121,7 +2121,7 @@ void bh_transmit(SLMP_INFO *info)
 		tty_wakeup(tty);
 }
 
-void bh_status(SLMP_INFO *info)
+static void bh_status(SLMP_INFO *info)
 {
 	if ( debug_level >= DEBUG_LEVEL_BH )
 		printk( "%s(%d):%s bh_status() entry\n",
@@ -2133,7 +2133,7 @@ void bh_status(SLMP_INFO *info)
 	info->cts_chkcount = 0;
 }
 
-void isr_timer(SLMP_INFO * info)
+static void isr_timer(SLMP_INFO * info)
 {
 	unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
 
@@ -2159,7 +2159,7 @@ void isr_timer(SLMP_INFO * info)
 			__FILE__,__LINE__,info->device_name);
 }
 
-void isr_rxint(SLMP_INFO * info)
+static void isr_rxint(SLMP_INFO * info)
 {
  	struct tty_struct *tty = info->tty;
  	struct	mgsl_icount *icount = &info->icount;
@@ -2218,7 +2218,7 @@ void isr_rxint(SLMP_INFO * info)
 /*
  * handle async rx data interrupts
  */
-void isr_rxrdy(SLMP_INFO * info)
+static void isr_rxrdy(SLMP_INFO * info)
 {
 	u16 status;
 	unsigned char DataByte;
@@ -2348,7 +2348,7 @@ static void isr_txeom(SLMP_INFO * info, unsigned char status)
 /*
  * handle tx status interrupts
  */
-void isr_txint(SLMP_INFO * info)
+static void isr_txint(SLMP_INFO * info)
 {
 	unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
 
@@ -2376,7 +2376,7 @@ void isr_txint(SLMP_INFO * info)
 /*
  * handle async tx data interrupts
  */
-void isr_txrdy(SLMP_INFO * info)
+static void isr_txrdy(SLMP_INFO * info)
 {
 	if ( debug_level >= DEBUG_LEVEL_ISR )
 		printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
@@ -2407,7 +2407,7 @@ void isr_txrdy(SLMP_INFO * info)
 		info->pending_bh |= BH_TRANSMIT;
 }
 
-void isr_rxdmaok(SLMP_INFO * info)
+static void isr_rxdmaok(SLMP_INFO * info)
 {
 	/* BIT7 = EOT (end of transfer)
 	 * BIT6 = EOM (end of message/frame)
@@ -2424,7 +2424,7 @@ void isr_rxdmaok(SLMP_INFO * info)
 	info->pending_bh |= BH_RECEIVE;
 }
 
-void isr_rxdmaerror(SLMP_INFO * info)
+static void isr_rxdmaerror(SLMP_INFO * info)
 {
 	/* BIT5 = BOF (buffer overflow)
 	 * BIT4 = COF (counter overflow)
@@ -2442,7 +2442,7 @@ void isr_rxdmaerror(SLMP_INFO * info)
 	info->pending_bh |= BH_RECEIVE;
 }
 
-void isr_txdmaok(SLMP_INFO * info)
+static void isr_txdmaok(SLMP_INFO * info)
 {
 	unsigned char status_reg1 = read_reg(info, SR1);
 
@@ -2460,7 +2460,7 @@ void isr_txdmaok(SLMP_INFO * info)
 	write_reg(info, IE0, info->ie0_value);
 }
 
-void isr_txdmaerror(SLMP_INFO * info)
+static void isr_txdmaerror(SLMP_INFO * info)
 {
 	/* BIT5 = BOF (buffer overflow)
 	 * BIT4 = COF (counter overflow)
@@ -2477,7 +2477,7 @@ void isr_txdmaerror(SLMP_INFO * info)
 
 /* handle input serial signal changes
  */
-void isr_io_pin( SLMP_INFO *info, u16 status )
+static void isr_io_pin( SLMP_INFO *info, u16 status )
 {
  	struct	mgsl_icount *icount;
 
@@ -3417,7 +3417,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	return retval;
 }
 
-int alloc_dma_bufs(SLMP_INFO *info)
+static int alloc_dma_bufs(SLMP_INFO *info)
 {
 	unsigned short BuffersPerFrame;
 	unsigned short BufferCount;
@@ -3491,7 +3491,7 @@ int alloc_dma_bufs(SLMP_INFO *info)
 
 /* Allocate DMA buffers for the transmit and receive descriptor lists.
  */
-int alloc_buf_list(SLMP_INFO *info)
+static int alloc_buf_list(SLMP_INFO *info)
 {
 	unsigned int i;
 
@@ -3550,7 +3550,7 @@ int alloc_buf_list(SLMP_INFO *info)
 
 /* Allocate the frame DMA buffers used by the specified buffer list.
  */
-int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
+static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
 {
 	int i;
 	unsigned long phys_addr;
@@ -3567,7 +3567,7 @@ int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,
 	return 0;
 }
 
-void free_dma_bufs(SLMP_INFO *info)
+static void free_dma_bufs(SLMP_INFO *info)
 {
 	info->buffer_list = NULL;
 	info->rx_buf_list = NULL;
@@ -3577,7 +3577,7 @@ void free_dma_bufs(SLMP_INFO *info)
 /* allocate buffer large enough to hold max_frame_size.
  * This buffer is used to pass an assembled frame to the line discipline.
  */
-int alloc_tmp_rx_buf(SLMP_INFO *info)
+static int alloc_tmp_rx_buf(SLMP_INFO *info)
 {
 	info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
 	if (info->tmp_rx_buf == NULL)
@@ -3585,13 +3585,13 @@ int alloc_tmp_rx_buf(SLMP_INFO *info)
 	return 0;
 }
 
-void free_tmp_rx_buf(SLMP_INFO *info)
+static void free_tmp_rx_buf(SLMP_INFO *info)
 {
 	kfree(info->tmp_rx_buf);
 	info->tmp_rx_buf = NULL;
 }
 
-int claim_resources(SLMP_INFO *info)
+static int claim_resources(SLMP_INFO *info)
 {
 	if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
 		printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
@@ -3678,7 +3678,7 @@ errout:
 	return -ENODEV;
 }
 
-void release_resources(SLMP_INFO *info)
+static void release_resources(SLMP_INFO *info)
 {
 	if ( debug_level >= DEBUG_LEVEL_INFO )
 		printk( "%s(%d):%s release_resources() entry\n",
@@ -3734,7 +3734,7 @@ void release_resources(SLMP_INFO *info)
 /* Add the specified device instance data structure to the
  * global linked list of devices and increment the device count.
  */
-void add_device(SLMP_INFO *info)
+static void add_device(SLMP_INFO *info)
 {
 	info->next_device = NULL;
 	info->line = synclinkmp_device_count;
@@ -3857,7 +3857,7 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
 	return info;
 }
 
-void device_init(int adapter_num, struct pci_dev *pdev)
+static void device_init(int adapter_num, struct pci_dev *pdev)
 {
 	SLMP_INFO *port_array[SCA_MAX_PORTS];
 	int port;
@@ -4051,7 +4051,7 @@ module_exit(synclinkmp_exit);
  * The TxCLK and RxCLK signals are generated from the BRG and
  * the TxD is looped back to the RxD internally.
  */
-void enable_loopback(SLMP_INFO *info, int enable)
+static void enable_loopback(SLMP_INFO *info, int enable)
 {
 	if (enable) {
 		/* MD2 (Mode Register 2)
@@ -4098,7 +4098,7 @@ void enable_loopback(SLMP_INFO *info, int enable)
  *	data_rate	data rate of clock in bits per second
  *			A data rate of 0 disables the AUX clock.
  */
-void set_rate( SLMP_INFO *info, u32 data_rate )
+static void set_rate( SLMP_INFO *info, u32 data_rate )
 {
        	u32 TMCValue;
        	unsigned char BRValue;
@@ -4144,7 +4144,7 @@ void set_rate( SLMP_INFO *info, u32 data_rate )
 
 /* Disable receiver
  */
-void rx_stop(SLMP_INFO *info)
+static void rx_stop(SLMP_INFO *info)
 {
 	if (debug_level >= DEBUG_LEVEL_ISR)
 		printk("%s(%d):%s rx_stop()\n",
@@ -4165,7 +4165,7 @@ void rx_stop(SLMP_INFO *info)
 
 /* enable the receiver
  */
-void rx_start(SLMP_INFO *info)
+static void rx_start(SLMP_INFO *info)
 {
 	int i;
 
@@ -4222,7 +4222,7 @@ void rx_start(SLMP_INFO *info)
 /* Enable the transmitter and send a transmit frame if
  * one is loaded in the DMA buffers.
  */
-void tx_start(SLMP_INFO *info)
+static void tx_start(SLMP_INFO *info)
 {
 	if (debug_level >= DEBUG_LEVEL_ISR)
 		printk("%s(%d):%s tx_start() tx_count=%d\n",
@@ -4292,7 +4292,7 @@ void tx_start(SLMP_INFO *info)
 
 /* stop the transmitter and DMA
  */
-void tx_stop( SLMP_INFO *info )
+static void tx_stop( SLMP_INFO *info )
 {
 	if (debug_level >= DEBUG_LEVEL_ISR)
 		printk("%s(%d):%s tx_stop()\n",
@@ -4319,7 +4319,7 @@ void tx_stop( SLMP_INFO *info )
 /* Fill the transmit FIFO until the FIFO is full or
  * there is no more data to load.
  */
-void tx_load_fifo(SLMP_INFO *info)
+static void tx_load_fifo(SLMP_INFO *info)
 {
 	u8 TwoBytes[2];
 
@@ -4368,7 +4368,7 @@ void tx_load_fifo(SLMP_INFO *info)
 
 /* Reset a port to a known state
  */
-void reset_port(SLMP_INFO *info)
+static void reset_port(SLMP_INFO *info)
 {
 	if (info->sca_base) {
 
@@ -4392,7 +4392,7 @@ void reset_port(SLMP_INFO *info)
 
 /* Reset all the ports to a known state.
  */
-void reset_adapter(SLMP_INFO *info)
+static void reset_adapter(SLMP_INFO *info)
 {
 	int i;
 
@@ -4404,7 +4404,7 @@ void reset_adapter(SLMP_INFO *info)
 
 /* Program port for asynchronous communications.
  */
-void async_mode(SLMP_INFO *info)
+static void async_mode(SLMP_INFO *info)
 {
 
   	unsigned char RegValue;
@@ -4543,7 +4543,7 @@ void async_mode(SLMP_INFO *info)
 
 /* Program the SCA for HDLC communications.
  */
-void hdlc_mode(SLMP_INFO *info)
+static void hdlc_mode(SLMP_INFO *info)
 {
 	unsigned char RegValue;
 	u32 DpllDivisor;
@@ -4745,7 +4745,7 @@ void hdlc_mode(SLMP_INFO *info)
 
 /* Set the transmit HDLC idle mode
  */
-void tx_set_idle(SLMP_INFO *info)
+static void tx_set_idle(SLMP_INFO *info)
 {
 	unsigned char RegValue = 0xff;
 
@@ -4765,7 +4765,7 @@ void tx_set_idle(SLMP_INFO *info)
 
 /* Query the adapter for the state of the V24 status (input) signals.
  */
-void get_signals(SLMP_INFO *info)
+static void get_signals(SLMP_INFO *info)
 {
 	u16 status = read_reg(info, SR3);
 	u16 gpstatus = read_status_reg(info);
@@ -4794,7 +4794,7 @@ void get_signals(SLMP_INFO *info)
 /* Set the state of DTR and RTS based on contents of
  * serial_signals member of device context.
  */
-void set_signals(SLMP_INFO *info)
+static void set_signals(SLMP_INFO *info)
 {
 	unsigned char RegValue;
 	u16 EnableBit;
@@ -4823,7 +4823,7 @@ void set_signals(SLMP_INFO *info)
  * and set the current buffer to the first buffer. This effectively
  * makes all buffers free and discards any data in buffers.
  */
-void rx_reset_buffers(SLMP_INFO *info)
+static void rx_reset_buffers(SLMP_INFO *info)
 {
 	rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
 }
@@ -4834,7 +4834,7 @@ void rx_reset_buffers(SLMP_INFO *info)
  * first  index of 1st receive buffer of frame
  * last   index of last receive buffer of frame
  */
-void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
+static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
 {
 	int done = 0;
 
@@ -4862,7 +4862,7 @@ void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int las
  *
  * Return Value:	1 if frame returned, otherwise 0
  */
-int rx_get_frame(SLMP_INFO *info)
+static int rx_get_frame(SLMP_INFO *info)
 {
 	unsigned int StartIndex, EndIndex;	/* index of 1st and last buffers of Rx frame */
 	unsigned short status;
@@ -5037,7 +5037,7 @@ Cleanup:
 
 /* load the transmit DMA buffer with data
  */
-void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
+static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
 {
 	unsigned short copy_count;
 	unsigned int i = 0;
@@ -5077,7 +5077,7 @@ void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
 	info->last_tx_buf = ++i;
 }
 
-int register_test(SLMP_INFO *info)
+static int register_test(SLMP_INFO *info)
 {
 	static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
 	static unsigned int count = ARRAY_SIZE(testval);
@@ -5116,7 +5116,7 @@ int register_test(SLMP_INFO *info)
 	return rc;
 }
 
-int irq_test(SLMP_INFO *info)
+static int irq_test(SLMP_INFO *info)
 {
 	unsigned long timeout;
 	unsigned long flags;
@@ -5208,7 +5208,7 @@ static int sca_init(SLMP_INFO *info)
 
 /* initialize adapter hardware
  */
-int init_adapter(SLMP_INFO *info)
+static int init_adapter(SLMP_INFO *info)
 {
 	int i;
 
@@ -5267,7 +5267,7 @@ int init_adapter(SLMP_INFO *info)
 /* Loopback an HDLC frame to test the hardware
  * interrupt and DMA functions.
  */
-int loopback_test(SLMP_INFO *info)
+static int loopback_test(SLMP_INFO *info)
 {
 #define TESTFRAMESIZE 20
 
@@ -5332,7 +5332,7 @@ int loopback_test(SLMP_INFO *info)
 
 /* Perform diagnostics on hardware
  */
-int adapter_test( SLMP_INFO *info )
+static int adapter_test( SLMP_INFO *info )
 {
 	unsigned long flags;
 	if ( debug_level >= DEBUG_LEVEL_INFO )
@@ -5394,7 +5394,7 @@ int adapter_test( SLMP_INFO *info )
 
 /* Test the shared memory on a PCI adapter.
  */
-int memory_test(SLMP_INFO *info)
+static int memory_test(SLMP_INFO *info)
 {
 	static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
 		0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
@@ -5446,7 +5446,7 @@ int memory_test(SLMP_INFO *info)
  * the write transation. This allows any pending DMA request to gain control
  * of the local bus in a timely fasion.
  */
-void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
+static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
 {
 	/* A load interval of 16 allows for 4 32-bit writes at */
 	/* 136ns each for a maximum latency of 542ns on the local bus.*/
@@ -5465,7 +5465,7 @@ void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned shor
 	memcpy(dest, src, count % sca_pci_load_interval);
 }
 
-void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
+static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
 {
 	int i;
 	int linecount;
@@ -5500,7 +5500,7 @@ void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
 /* called when HDLC frame times out
  * update stats and do tx completion processing
  */
-void tx_timeout(unsigned long context)
+static void tx_timeout(unsigned long context)
 {
 	SLMP_INFO *info = (SLMP_INFO*)context;
 	unsigned long flags;
@@ -5527,7 +5527,7 @@ void tx_timeout(unsigned long context)
 
 /* called to periodically check the DSR/RI modem signal input status
  */
-void status_timeout(unsigned long context)
+static void status_timeout(unsigned long context)
 {
 	u16 status = 0;
 	SLMP_INFO *info = (SLMP_INFO*)context;
@@ -5578,36 +5578,36 @@ void status_timeout(unsigned long context)
 	}
 
 
-unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
+static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
 {
 	CALC_REGADDR();
 	return *RegAddr;
 }
-void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
+static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
 {
 	CALC_REGADDR();
 	*RegAddr = Value;
 }
 
-u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
+static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
 {
 	CALC_REGADDR();
 	return *((u16 *)RegAddr);
 }
 
-void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
+static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
 {
 	CALC_REGADDR();
 	*((u16 *)RegAddr) = Value;
 }
 
-unsigned char read_status_reg(SLMP_INFO * info)
+static unsigned char read_status_reg(SLMP_INFO * info)
 {
 	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
 	return *RegAddr;
 }
 
-void write_control_reg(SLMP_INFO * info)
+static void write_control_reg(SLMP_INFO * info)
 {
 	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
 	*RegAddr = info->port_array[0]->ctrlreg_value;
-- 
1.5.4.2.200.g99e75




^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2008-02-20 21:56 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-02-20 21:56 [PATCH] char: make functions static in synclinkmp.c Harvey Harrison

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).