LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Zhang, Rui" <rui.zhang@intel.com>
To: Jonathan McDowell <noodles@earth.li>
Cc: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: Re: 2.6.25 regression/oops on boot (ACPI related?)
Date: Fri, 29 Feb 2008 01:20:27 +0800 [thread overview]
Message-ID: <1204219227.10256.146.camel@acpi-hp-zz.sh.intel.com> (raw)
In-Reply-To: <20080228200855.GJ9009@earth.li>
Hi, Jonathan,
Please attach the acpidump output using the latest pmtools at :
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/
Please attach the result of "cat /proc/acpi/thermal_zone/*/*" as well.
thanks,
rui
On Fri, 2008-02-29 at 04:08 +0800, Jonathan McDowell wrote:
> I'm getting a "general protection fault" when trying to boot
> 2.6.25-rc3
> on my AMD64 box; 2.6.24 boots fine. The machine just seems to end up
> sitting there at the end, but still responds to a ctrl-alt-del to
> cleanly shutdown. The GPF is as follows:
>
> -----
> general protection fault: 0000 [1] PREEMPT SMP
> CPU 1
> Modules linked in: thermal(+) processor fan
> Pid: 598, comm: modprobe Not tainted 2.6.25-rc3 #1
> RIP: 0010:[<ffffffff803590a8>] [<ffffffff803590a8>]
> acpi_ns_map_handle_to_node+0x19/0x23
> RSP: 0018:ffff81011de5fc68 EFLAGS: 00010246
> RAX: 0000000000000000 RBX: 0000000000001001 RCX: 0000000000000000
> RDX: 0000000000005067 RSI: 0000000000000001 RDI: 4d52454854584e4c
> RBP: ffff81011de5fc68 R08: 0000000000000000 R09: ffff81011de5fc78
> R10: ffff81011dcc0648 R11: ffffffff802d566a R12: 4d52454854584e4c
> R13: ffff81011de5fcf8 R14: ffffffff80362bd3 R15: 0000000000000003
> FS: 00007f04840336e0(0000) GS:ffff81011fab1bc0(0000)
> knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00007f0484032000 CR3: 000000011defc000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process modprobe (pid: 598, threadinfo ffff81011de5e000, task
> ffff81011de38640)
> Stack: ffff81011de5fc98 ffffffff803584ab ffff81011de5fcf8
> ffff81011df1a800
> 0000000000000000 ffff81011de5fcf8 ffff81011de5fcb8 ffffffff80362382
> ffff81011de52230 0000000000000001 ffff81011de5fd28 ffffffff880113a9
> Call Trace:
> [<ffffffff803584ab>] acpi_get_data+0x3f/0x70
> [<ffffffff80362382>] acpi_bus_get_device+0x25/0x39
> [<ffffffff880113a9>] :thermal:acpi_thermal_cooling_device_cb
> +0x6b/0x166
> [<ffffffff80405ee8>] ? thermal_zone_bind_cooling_device+0x0/0x26e
> [<ffffffff880114c6>] :thermal:acpi_thermal_bind_cooling_device
> +0x10/0x12
> [<ffffffff80405e68>] thermal_zone_device_register+0x252/0x2d2
> [<ffffffff88011626>] :thermal:acpi_thermal_add+0x15e/0x42b
> [<ffffffff80364138>] acpi_device_probe+0x45/0x92
> [<ffffffff803aac23>] driver_probe_device+0xc0/0x147
> [<ffffffff803aad55>] ? __driver_attach+0x0/0x94
> [<ffffffff803aadb0>] __driver_attach+0x5b/0x94
> [<ffffffff803a9f55>] bus_for_each_dev+0x4f/0x7f
> [<ffffffff803aaa6e>] driver_attach+0x1c/0x1e
> [<ffffffff803aa81e>] bus_add_driver+0xb7/0x201
> [<ffffffff803aafdb>] driver_register+0x5e/0xd6
> [<ffffffff803644ce>] acpi_bus_register_driver+0x3e/0x40
> [<ffffffff88017061>] :thermal:acpi_thermal_init+0x61/0x83
> [<ffffffff80257120>] sys_init_module+0x98/0x16b
> [<ffffffff8020c0eb>] system_call_after_swapgs+0x7b/0x80
>
>
> Code: 83 c6 04 41 ff c8 45 85 c0 75 a7 c6 06 00 31 c0 c9 c3 48 8d 47
> ff 55 48 83 f8 fd 48 89 e5 76 09 48 8b 05 cc 49 3f 00 eb 0a 31 c0 <80>
> 7f 08 0f 48 0f 44 c7 c9 c3 55 48 89 f8 48 89 e5 c9 c3 55 31
> RIP [<ffffffff803590a8>] acpi_ns_map_handle_to_node+0x19/0x23
> RSP <ffff81011de5fc68>
> ---[ end trace c027ad8802a9e766 ]---
> Segmentation fault
> -----
>
> Full boot log is at:
>
> http://the.earth.li/~noodles/2.6.25-breakage/meepok.console-2.6.25-rc3.log
>
> Config at:
>
> http://the.earth.li/~noodles/2.6.25-breakage/config-2.6.25-rc3
>
> 2.6.25-rc1 and 2.6.25-rc2-git6 both show the same issue.
>
> J.
>
> --
> jid:
> noodles@jabber.earth.li
> In God we trust; all else we walk through.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
next prev parent reply other threads:[~2008-02-29 2:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-28 20:08 Jonathan McDowell
2008-02-28 17:20 ` Zhang, Rui [this message]
2008-02-29 7:54 ` Jonathan McDowell
2008-02-28 23:38 ` Zhang, Rui
2008-03-01 15:27 ` Jonathan McDowell
2008-03-10 14:37 ` Jonathan McDowell
2008-03-10 15:01 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1204219227.10256.146.camel@acpi-hp-zz.sh.intel.com \
--to=rui.zhang@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=noodles@earth.li \
--subject='Re: 2.6.25 regression/oops on boot (ACPI related?)' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).