LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Alessandro Zummo <alessandro.zummo@towertech.it>,
	David Brownell <david-b@pacbell.net>
Cc: rtc-linux@googlegroups.com,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/2] rtc: rtc-wm8350: Add support for WM8350 RTC
Date: Mon, 27 Oct 2008 17:40:01 +0000	[thread overview]
Message-ID: <1225129201-4634-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20081027182654.7495be2b@i1501.lan.towertech.it>

This adds support for the RTC provided by the Wolfson Microelectronics
WM8350.

This driver was originally written by Graeme Gregory and Liam Girdwood,
though it has been modified since then to update it to current mainline
coding standards and for API completeness.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
This revision:
 - Marks remove() with __devexit_p()
 - Fixes grammar in MODULE_DESCRIPTION()

which should address all the feedback from Alessandro.

 drivers/rtc/Kconfig            |   10 +
 drivers/rtc/Makefile           |    1 +
 drivers/rtc/rtc-wm8350.c       |  514 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/wm8350/rtc.h |    2 +
 4 files changed, 527 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/rtc-wm8350.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8abbb20..7951ad2 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -468,6 +468,16 @@ config RTC_DRV_V3020
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-v3020.
 
+config RTC_DRV_WM8350
+	tristate "Wolfson Microelectronics WM8350 RTC"
+	depends on MFD_WM8350
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  of the Wolfson Microelectronics WM8350.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-wm8350".
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_OMAP
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index e9e8474..7a41201 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -66,4 +66,5 @@ obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
 obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl4030.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c
new file mode 100644
index 0000000..5c5e3aa
--- /dev/null
+++ b/drivers/rtc/rtc-wm8350.c
@@ -0,0 +1,514 @@
+/*
+ *	Real Time Clock driver for Wolfson Microelectronics WM8350
+ *
+ *	Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ *  Author: Liam Girdwood
+ *          linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm8350/rtc.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#define WM8350_SET_ALM_RETRIES	5
+#define WM8350_SET_TIME_RETRIES	5
+#define WM8350_GET_TIME_RETRIES	5
+
+#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev)
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	u16 time1[4], time2[4];
+	int retries = WM8350_GET_TIME_RETRIES, ret;
+
+	/*
+	 * Read the time twice and compare.
+	 * If time1 == time2, then time is valid else retry.
+	 */
+	do {
+		ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+					4, time1);
+		if (ret < 0)
+			return ret;
+		ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+					4, time2);
+		if (ret < 0)
+			return ret;
+
+		if (memcmp(time1, time2, sizeof(time1)) == 0) {
+			tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK;
+
+			tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK)
+			    >> WM8350_RTC_MINS_SHIFT;
+
+			tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK;
+
+			tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT)
+				       & 0x7) - 1;
+
+			tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK)
+				      >> WM8350_RTC_MTH_SHIFT) - 1;
+
+			tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK);
+
+			tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK)
+				       >> WM8350_RTC_YHUNDREDS_SHIFT) * 100;
+			tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK;
+
+			tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon,
+						    tm->tm_year);
+			tm->tm_year -= 1900;
+
+			dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n",
+				retries,
+				time1[0], time1[1], time1[2], time1[3]);
+
+			return 0;
+		}
+	} while (retries--);
+
+	dev_err(dev, "timed out reading RTC time\n");
+	return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	u16 time[4];
+	u16 rtc_ctrl;
+	int ret, retries = WM8350_SET_TIME_RETRIES;
+
+	time[0] = tm->tm_sec;
+	time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT;
+	time[1] = tm->tm_hour;
+	time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT;
+	time[2] = tm->tm_mday;
+	time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT;
+	time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT;
+	time[3] |= (tm->tm_year + 1900) % 100;
+
+	dev_dbg(dev, "Setting: %04x %04x %04x %04x\n",
+		time[0], time[1], time[2], time[3]);
+
+	/* Set RTC_SET to stop the clock */
+	ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET);
+	if (ret < 0)
+		return ret;
+
+	/* Wait until confirmation of stopping */
+	do {
+		rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+	} while (retries-- && !(rtc_ctrl & WM8350_RTC_STS));
+
+	if (!retries) {
+		dev_err(dev, "timed out on set confirmation\n");
+		return -EIO;
+	}
+
+	/* Write time to RTC */
+	ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time);
+	if (ret < 0)
+		return ret;
+
+	/* Clear RTC_SET to start the clock */
+	ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+				WM8350_RTC_SET);
+	return ret;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	u16 time[4];
+	int ret;
+
+	ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time);
+	if (ret < 0)
+		return ret;
+
+	tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK;
+	if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK)
+		tm->tm_sec = -1;
+
+	tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK;
+	if (tm->tm_min == WM8350_RTC_ALMMINS_MASK)
+		tm->tm_min = -1;
+	else
+		tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT;
+
+	tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK;
+	if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK)
+		tm->tm_hour = -1;
+
+	tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1;
+	if (tm->tm_wday > 7)
+		tm->tm_wday = -1;
+
+	tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK;
+	if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK)
+		tm->tm_mon = -1;
+	else
+		tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1;
+
+	tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK);
+	if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK)
+		tm->tm_mday = -1;
+
+	tm->tm_year = -1;
+
+	alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS);
+
+	return 0;
+}
+
+static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350)
+{
+	int retries = WM8350_SET_ALM_RETRIES;
+	u16 rtc_ctrl;
+	int ret;
+
+	/* Set RTC_SET to stop the clock */
+	ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+			      WM8350_RTC_ALMSET);
+	if (ret < 0)
+		return ret;
+
+	/* Wait until confirmation of stopping */
+	do {
+		rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+	} while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS));
+
+	if (!(rtc_ctrl & WM8350_RTC_ALMSTS))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int wm8350_rtc_start_alarm(struct wm8350 *wm8350)
+{
+	int ret;
+	int retries = WM8350_SET_ALM_RETRIES;
+	u16 rtc_ctrl;
+
+	ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+				WM8350_RTC_ALMSET);
+	if (ret < 0)
+		return ret;
+
+	/* Wait until confirmation */
+	do {
+		rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+	} while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS);
+
+	if (rtc_ctrl & WM8350_RTC_ALMSTS)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	u16 time[3];
+	int ret;
+
+	memset(time, 0, sizeof(time));
+
+	if (tm->tm_sec != -1)
+		time[0] |= tm->tm_sec;
+	else
+		time[0] |= WM8350_RTC_ALMSECS_MASK;
+
+	if (tm->tm_min != -1)
+		time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT;
+	else
+		time[0] |= WM8350_RTC_ALMMINS_MASK;
+
+	if (tm->tm_hour != -1)
+		time[1] |= tm->tm_hour;
+	else
+		time[1] |= WM8350_RTC_ALMHRS_MASK;
+
+	if (tm->tm_wday != -1)
+		time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT;
+	else
+		time[1] |= WM8350_RTC_ALMDAY_MASK;
+
+	if (tm->tm_mday != -1)
+		time[2] |= tm->tm_mday;
+	else
+		time[2] |= WM8350_RTC_ALMDATE_MASK;
+
+	if (tm->tm_mon != -1)
+		time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT;
+	else
+		time[2] |= WM8350_RTC_ALMMTH_MASK;
+
+	ret = wm8350_rtc_stop_alarm(wm8350);
+	if (ret < 0)
+		return ret;
+
+	/* Write time to RTC */
+	ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES,
+				 3, time);
+	if (ret < 0)
+		return ret;
+
+	if (alrm->enabled)
+		ret = wm8350_rtc_start_alarm(wm8350);
+
+	return ret;
+}
+
+/*
+ * Handle commands from user-space
+ */
+static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd,
+			    unsigned long arg)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+
+	switch (cmd) {
+	case RTC_AIE_OFF:
+		return wm8350_rtc_stop_alarm(wm8350);
+	case RTC_AIE_ON:
+		return wm8350_rtc_start_alarm(wm8350);
+
+	case RTC_UIE_OFF:
+		wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+		break;
+	case RTC_UIE_ON:
+		wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+		break;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return 0;
+}
+
+static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq,
+				     void *data)
+{
+	struct rtc_device *rtc = wm8350->rtc.rtc;
+	int ret;
+
+	rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+	/* Make it one shot */
+	ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+			      WM8350_RTC_ALMSET);
+	if (ret != 0) {
+		dev_err(&(wm8350->rtc.pdev->dev),
+			"Failed to disable alarm: %d\n", ret);
+	}
+}
+
+static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq,
+				      void *data)
+{
+	struct rtc_device *rtc = wm8350->rtc.rtc;
+
+	rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF);
+}
+
+static const struct rtc_class_ops wm8350_rtc_ops = {
+	.ioctl = wm8350_rtc_ioctl,
+	.read_time = wm8350_rtc_readtime,
+	.set_time = wm8350_rtc_settime,
+	.read_alarm = wm8350_rtc_readalarm,
+	.set_alarm = wm8350_rtc_setalarm,
+};
+
+#ifdef CONFIG_PM
+static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+	int ret = 0;
+	u16 reg;
+
+	reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+
+	if (device_may_wakeup(&wm8350->rtc.pdev->dev) &&
+	    reg & WM8350_RTC_ALMSTS) {
+		ret = wm8350_rtc_stop_alarm(wm8350);
+		if (ret != 0)
+			dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n",
+				ret);
+	}
+
+	return ret;
+}
+
+static int wm8350_rtc_resume(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (wm8350->rtc.alarm_enabled) {
+		ret = wm8350_rtc_start_alarm(wm8350);
+		if (ret != 0)
+			dev_err(&pdev->dev,
+				"Failed to restart RTC alarm: %d\n", ret);
+	}
+
+	return 0;
+}
+
+#else
+#define wm8350_rtc_suspend NULL
+#define wm8350_rtc_resume NULL
+#endif
+
+static int wm8350_rtc_probe(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+	struct wm8350_rtc *wm_rtc = &wm8350->rtc;
+	int ret = 0;
+	u16 timectl, power5;
+
+	timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+	if (timectl & WM8350_RTC_BCD) {
+		dev_err(&pdev->dev, "RTC BCD mode not supported\n");
+		return -EINVAL;
+	}
+	if (timectl & WM8350_RTC_12HR) {
+		dev_err(&pdev->dev, "RTC 12 hour mode not supported\n");
+		return -EINVAL;
+	}
+
+	/* enable the RTC if it's not already enabled */
+	power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+	if (!(power5 &  WM8350_RTC_TICK_ENA)) {
+		dev_info(wm8350->dev, "Starting RTC\n");
+
+		wm8350_reg_unlock(wm8350);
+
+		ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5,
+				      WM8350_RTC_TICK_ENA);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret);
+			return ret;
+		}
+
+		wm8350_reg_lock(wm8350);
+	}
+
+	if (timectl & WM8350_RTC_STS) {
+		int retries;
+
+		ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+					WM8350_RTC_SET);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to start: %d\n", ret);
+			return ret;
+		}
+
+		retries = WM8350_SET_TIME_RETRIES;
+		do {
+			timectl = wm8350_reg_read(wm8350,
+						  WM8350_RTC_TIME_CONTROL);
+		} while (timectl & WM8350_RTC_STS && retries--);
+
+		if (retries == 0) {
+			dev_err(&pdev->dev, "failed to start: timeout\n");
+			return -ENODEV;
+		}
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev,
+					  &wm8350_rtc_ops, THIS_MODULE);
+	if (IS_ERR(wm_rtc->rtc)) {
+		ret = PTR_ERR(wm_rtc->rtc);
+		dev_err(&pdev->dev, "failed to register RTC: %d\n", ret);
+		return ret;
+	}
+
+	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER);
+
+	wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC,
+			    wm8350_rtc_update_handler, NULL);
+
+	wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM,
+			    wm8350_rtc_alarm_handler, NULL);
+	wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM);
+
+	return 0;
+}
+
+static int __devexit wm8350_rtc_remove(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+	struct wm8350_rtc *wm_rtc = &wm8350->rtc;
+
+	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+
+	wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC);
+	wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM);
+
+	rtc_device_unregister(wm_rtc->rtc);
+
+	return 0;
+}
+
+static struct platform_driver wm8350_rtc_driver = {
+	.probe = wm8350_rtc_probe,
+	.remove = __devexit_p(wm8350_rtc_remove),
+	.suspend = wm8350_rtc_suspend,
+	.resume = wm8350_rtc_resume,
+	.driver = {
+		.name = "wm8350-rtc",
+	},
+};
+
+static int __init wm8350_rtc_init(void)
+{
+	return platform_driver_register(&wm8350_rtc_driver);
+}
+module_init(wm8350_rtc_init);
+
+static void __exit wm8350_rtc_exit(void)
+{
+	platform_driver_unregister(&wm8350_rtc_driver);
+}
+module_exit(wm8350_rtc_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM8350");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-rtc");
diff --git a/include/linux/mfd/wm8350/rtc.h b/include/linux/mfd/wm8350/rtc.h
index dfda69e..24add2b 100644
--- a/include/linux/mfd/wm8350/rtc.h
+++ b/include/linux/mfd/wm8350/rtc.h
@@ -261,6 +261,8 @@
 
 struct wm8350_rtc {
 	struct platform_device *pdev;
+	struct rtc_device *rtc;
+	int alarm_enabled;      /* used over suspend/resume */
 };
 
 #endif
-- 
1.5.6.5


  reply	other threads:[~2008-10-27 17:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-27 15:38 [PATCH 1/2] rtc: Fix handling of missing tm_year data when reading alarms Mark Brown
2008-10-27 15:38 ` [PATCH 2/2] rtc: rtc-wm8350: Add support for WM8350 RTC Mark Brown
2008-10-27 17:04   ` [rtc-linux] " Alessandro Zummo
2008-10-27 17:24     ` [rtc-linux] " Mark Brown
2008-10-27 17:26       ` Alessandro Zummo
2008-10-27 17:40         ` Mark Brown [this message]
2008-10-28  6:24           ` Andrew Morton
2008-10-27 20:03     ` [rtc-linux] " David Brownell
2008-10-27 20:09       ` Mark Brown
2008-10-27 20:19         ` David Brownell
2008-10-28  6:22   ` Andrew Morton
2008-10-28 10:02     ` Mark Brown
2008-10-27 16:51 ` [PATCH 1/2] rtc: Fix handling of missing tm_year data when reading alarms Alessandro Zummo
  -- strict thread matches above, loose matches on Subject: below --
2008-10-20 19:33 [PATCH 0/2] RTC updates Mark Brown
2008-10-20 19:35 ` [PATCH 1/2] rtc: Fix handling of missing tm_year data when reading alarms Mark Brown
2008-10-20 19:35   ` [PATCH 2/2] rtc: rtc-wm8350: Add support for WM8350 RTC Mark Brown
2008-10-27  5:14     ` Andrew Morton
2008-10-27 10:08       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1225129201-4634-1-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=akpm@linux-foundation.org \
    --cc=alessandro.zummo@towertech.it \
    --cc=david-b@pacbell.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --subject='Re: [PATCH 2/2] rtc: rtc-wm8350: Add support for WM8350 RTC' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).