regulator: struct device - replace bus_id with dev_name(), dev_set_name()

regulator: struct device - replace bus_id with dev_name(), dev_set_name()

[Kay Sievers]

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Thanks,
Kay


From: Kay Sievers <kay.sievers@vrfy.org>
Subject: regulator: struct device - replace bus_id with dev_name(), dev_set_name()

Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
---
 drivers/regulator/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1779,8 +1779,8 @@ struct regulator_dev *regulator_register
 	/* register with sysfs */
 	rdev->dev.class = &regulator_class;
 	rdev->dev.parent = dev;
-	snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
-		 "regulator.%d", atomic_inc_return(&regulator_no) - 1);
+	dev_set_name(&rdev->dev, "regulator.%d",
+		     atomic_inc_return(&regulator_no) - 1);
 	ret = device_register(&rdev->dev);
 	if (ret != 0) {
 		kfree(rdev);

Re: regulator: struct device - replace bus_id with dev_name(), dev_set_name()

[Liam Girdwood]

On Sun, 2008-11-02 at 03:55 +0100, Kay Sievers wrote:
> This patch is part of a larger patch series which will remove
> the "char bus_id[20]" name string from struct device. The device
> name is managed in the kobject anyway, and without any size
> limitation, and just needlessly copied into "struct device".
> 
> To set and read the device name dev_name(dev) and dev_set_name(dev)
> must be used. If your code uses static kobjects, which it shouldn't
> do, "const char *init_name" can be used to statically provide the
> name the registered device should have. At registration time, the
> init_name field is cleared, to enforce the use of dev_name(dev) to
> access the device name at a later time.
> 
> We need to get rid of all occurrences of bus_id in the entire tree
> to be able to enable the new interface. Please apply this patch,
> and possibly convert any remaining remaining occurrences of bus_id.
> 
> We want to submit a patch to -next, which will remove bus_id from
> "struct device", to find the remaining pieces to convert, and finally
> switch over to the new api, which will remove the 20 bytes array
> and does no longer have a size limitation.
> 

Applied.

Thanks

Liam