LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Bryan Wu <cooloney@kernel.org>
To: bigeasy@linutronix.de, linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Michael Hennerich <michael.hennerich@analog.com>,
	Bryan Wu <cooloney@kernel.org>
Subject: [PATCH] USB/ISP1760: Add support for the generic platfrom device centralized driver model
Date: Thu,  6 Nov 2008 17:25:49 +0800	[thread overview]
Message-ID: <1225963549-9892-1-git-send-email-cooloney@kernel.org> (raw)

From: Michael Hennerich <michael.hennerich@analog.com>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 drivers/usb/host/isp1760-if.c |   98 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 98 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index af849f5..dc16698 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -3,6 +3,7 @@
  * Currently there is support for
  * - OpenFirmware
  * - PCI
+ * - PDEV (generic platform device centralized driver model)
  *
  * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
  *
@@ -23,6 +24,12 @@
 #include <linux/pci.h>
 #endif
 
+#if !defined(CONFIG_USB_ISP1760_OF) && !defined(CONFIG_USB_ISP1760_PCI)
+#define USB_ISP1760_PDEV
+#include <linux/platform_device.h>
+#include <linux/usb/isp1760.h>
+#endif
+
 #ifdef CONFIG_USB_ISP1760_OF
 static int of_isp1760_probe(struct of_device *dev,
 		const struct of_device_id *match)
@@ -286,12 +293,100 @@ static struct pci_driver isp1761_pci_driver = {
 };
 #endif
 
+#ifdef USB_ISP1760_PDEV
+static int __devinit
+isp1760_pdev_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource	*addr;
+	int irq;
+	unsigned int devflags = 0;
+	struct isp1760_platform_data *priv = pdev->dev.platform_data;
+
+	/* basic sanity checks first.  board-specific init logic should
+	 * have initialized these two resources and probably board
+	 * specific platform_data.  we don't probe for IRQs, and do only
+	 * minimal sanity checking.
+	 */
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (pdev->num_resources < 2)
+		return -ENODEV;
+
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+
+	if (!addr || irq < 0)
+		return -ENODEV;
+
+	if (priv) {
+		if (priv->is_isp1761)
+			devflags |= ISP1760_FLAG_ISP1761;
+		if (priv->port1_disable)
+			devflags |= ISP1760_FLAG_PORT1_DIS;
+		if (priv->bus_width_16)
+			devflags |= ISP1760_FLAG_BUS_WIDTH_16;
+		if (priv->port1_otg)
+			devflags |= ISP1760_FLAG_OTG_EN;
+		if (priv->analog_oc)
+			devflags |= ISP1760_FLAG_ANALOG_OC;
+		if (priv->dack_polarity_high)
+			devflags |= ISP1760_FLAG_DACK_POL_HIGH;
+		if (priv->dreq_polarity_high)
+			devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
+	}
+
+	hcd = isp1760_register(addr->start, resource_size(addr), irq,
+		IRQF_DISABLED | IRQF_SHARED | IRQF_TRIGGER_FALLING,
+		&pdev->dev, dev_name(&pdev->dev),
+		devflags);
+
+	if (IS_ERR(hcd))
+		return PTR_ERR(hcd);
+
+	return 0;
+}
+
+static int __devexit
+isp1760_pdev_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+/* this driver is exported so sl811_cs can depend on it */
+struct platform_driver isp1760_pdev_driver = {
+	.probe =	isp1760_pdev_probe,
+	.remove =	__devexit_p(isp1760_pdev_remove),
+	.driver = {
+		.name =	"isp1760-hcd",
+		.owner = THIS_MODULE,
+	},
+};
+#endif /* USB_ISP1760_PDEV */
+
 static int __init isp1760_init(void)
 {
 	int ret = -ENODEV;
 
 	init_kmem_once();
 
+#ifdef USB_ISP1760_PDEV
+	ret = platform_driver_register(&isp1760_pdev_driver);
+	if (ret) {
+		deinit_kmem_cache();
+		return ret;
+	}
+#endif
+
 #ifdef CONFIG_USB_ISP1760_OF
 	ret = of_register_platform_driver(&isp1760_of_driver);
 	if (ret) {
@@ -325,6 +420,9 @@ static void __exit isp1760_exit(void)
 #ifdef CONFIG_USB_ISP1760_PCI
 	pci_unregister_driver(&isp1761_pci_driver);
 #endif
+#ifdef USB_ISP1760_PDEV
+	platform_driver_unregister(&isp1760_pdev_driver);
+#endif
 	deinit_kmem_cache();
 }
 module_exit(isp1760_exit);
-- 
1.5.6.3

             reply	other threads:[~2008-11-06  9:24 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-06  9:25 Bryan Wu [this message]
2008-11-06 17:57 ` [PATCH] USB/ISP1760: Add support for the generic platfrom device centralized driver model Sebastian Andrzej Siewior
2008-11-06 19:29   ` Hennerich, Michael
2008-11-07  4:00     ` Bryan Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1225963549-9892-1-git-send-email-cooloney@kernel.org \
    --to=cooloney@kernel.org \
    --cc=bigeasy@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).