LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 0/7] TI ST patches for new requirements
@ 2011-02-02 11:00 pavan_savoy
  2011-02-02 11:00 ` [PATCH 1/7] drivers:misc: ti-st: register with channel IDs pavan_savoy
  0 siblings, 1 reply; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

Greg,

The following 7 patches are some major updates that has been going on
in the Texas Instrument's shared transport driver.
These contain few new requirements and some cleanup patches.

The major 2 changes are the first 2 patches.

1. The change from protocol based registration to packet/channel based
registration has been conceptually ACKed by Gustavo (Bluetooth Maintainer).
With this TI-ST now no longer refers to bluetooth headers which was a concern
previously.

2. The 2nd major change is from rfkill based communication to normal sysfs
entry based communication.
This has been conceptually ACKed by Samuel Ortiz (MFD Maintainer).
Previously when the line discipline driver wanted the UART to be opened
and ldisc to be installed, it ab-used the rfkill device node to notify the
user-space daemon, Now it notifies using simpler sysfs entries & making use
of sysfs_notify.
This also allows the UART specifics to be shared with user-space.

Other patches include fixing left over error codes, correcting few dbug logs,
fixes for bugs found during stress testing, firmware change & cleanup.

Pavan Savoy (7):
  drivers:misc: ti-st: register with channel IDs
  drivers:misc: ti-st: move from rfkill to sysfs
  drivers:misc: ti-st: fix error codes
  drivers:misc: ti-st: set right debug levels for logs
  drivers:misc: ti-st: firmware download optimization
  drivers:misc: ti-st: fix hci-ll on wake_ind collision
  drivers:misc: ti-st: remove multiple gpio handling

 drivers/misc/ti-st/st_core.c |  413 +++++++++++++----------------------
 drivers/misc/ti-st/st_kim.c  |  491 +++++++++++++++++++++---------------------
 drivers/misc/ti-st/st_ll.c   |   10 +-
 include/linux/ti_wilink_st.h |   76 +++++---
 4 files changed, 446 insertions(+), 544 deletions(-)


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/7] drivers:misc: ti-st: register with channel IDs
  2011-02-02 11:00 [PATCH 0/7] TI ST patches for new requirements pavan_savoy
@ 2011-02-02 11:00 ` pavan_savoy
  2011-02-02 11:00   ` [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs pavan_savoy
  0 siblings, 1 reply; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

The architecture of shared transport had begun with individual
protocols like bluetooth, fm and gps telling the shared transport
what sort of protocol they are and then expecting the ST driver
to parse the incoming data from chip and forward data only
relevant to the protocol drivers.

This change would mean each protocol drivers would also send
information to ST driver as to how to intrepret their protocol
data coming out of the chip.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_core.c |  355 +++++++++++++-----------------------------
 drivers/misc/ti-st/st_kim.c  |   56 ++++----
 include/linux/ti_wilink_st.h |   40 ++++--
 3 files changed, 167 insertions(+), 284 deletions(-)

diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f9aad06..84d73c5 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -25,10 +25,9 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 
-/* understand BT, FM and GPS for now */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
+#include <linux/seq_file.h>
+#include <linux/skbuff.h>
+
 #include <linux/ti_wilink_st.h>
 
 /* function pointer pointing to either,
@@ -38,21 +37,20 @@
 void (*st_recv) (void*, const unsigned char*, long);
 
 /********************************************************************/
-#if 0
-/* internal misc functions */
-bool is_protocol_list_empty(void)
+static void add_channel_to_table(struct st_data_s *st_gdata,
+		struct st_proto_s *new_proto)
 {
-	unsigned char i = 0;
-	pr_debug(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
-		if (st_gdata->list[i] != NULL)
-			return ST_NOTEMPTY;
-		/* not empty */
-	}
-	/* list empty */
-	return ST_EMPTY;
+	pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
+	/* list now has the channel id as index itself */
+	st_gdata->list[new_proto->chnl_id] = new_proto;
+}
+
+static void remove_channel_from_table(struct st_data_s *st_gdata,
+		struct st_proto_s *proto)
+{
+	pr_info("%s: id %d\n", __func__, proto->chnl_id);
+	st_gdata->list[proto->chnl_id] = NULL;
 }
-#endif
 
 /* can be called in from
  * -- KIM (during fw download)
@@ -82,15 +80,15 @@ int st_int_write(struct st_data_s *st_gdata,
  * push the skb received to relevant
  * protocol stacks
  */
-void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
+void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
 {
-	pr_info(" %s(prot:%d) ", __func__, protoid);
+	pr_info(" %s(prot:%d) ", __func__, chnl_id);
 
 	if (unlikely
 	    (st_gdata == NULL || st_gdata->rx_skb == NULL
-	     || st_gdata->list[protoid] == NULL)) {
-		pr_err("protocol %d not registered, no data to send?",
-			   protoid);
+	     || st_gdata->list[chnl_id] == NULL)) {
+		pr_err("chnl_id %d not registered, no data to send?",
+			   chnl_id);
 		kfree_skb(st_gdata->rx_skb);
 		return;
 	}
@@ -99,17 +97,17 @@ void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
 	 * - should be just skb_queue_tail for the
 	 *   protocol stack driver
 	 */
-	if (likely(st_gdata->list[protoid]->recv != NULL)) {
+	if (likely(st_gdata->list[chnl_id]->recv != NULL)) {
 		if (unlikely
-			(st_gdata->list[protoid]->recv
-			(st_gdata->list[protoid]->priv_data, st_gdata->rx_skb)
+			(st_gdata->list[chnl_id]->recv
+			(st_gdata->list[chnl_id]->priv_data, st_gdata->rx_skb)
 			     != 0)) {
-			pr_err(" proto stack %d's ->recv failed", protoid);
+			pr_err(" proto stack %d's ->recv failed", chnl_id);
 			kfree_skb(st_gdata->rx_skb);
 			return;
 		}
 	} else {
-		pr_err(" proto stack %d's ->recv null", protoid);
+		pr_err(" proto stack %d's ->recv null", chnl_id);
 		kfree_skb(st_gdata->rx_skb);
 	}
 	return;
@@ -124,7 +122,7 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 {
 	unsigned char i = 0;
 	pr_info(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
+	for (i = 0; i < ST_MAX_CHANNELS; i++) {
 		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
 			   st_gdata->list[i]->reg_complete_cb != NULL))
 			st_gdata->list[i]->reg_complete_cb
@@ -133,7 +131,7 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 }
 
 static inline int st_check_data_len(struct st_data_s *st_gdata,
-	int protoid, int len)
+	unsigned char chnl_id, int len)
 {
 	int room = skb_tailroom(st_gdata->rx_skb);
 
@@ -144,7 +142,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 		 * has zero length payload. So, ask ST CORE to
 		 * forward the packet to protocol driver (BT/FM/GPS)
 		 */
-		st_send_frame(protoid, st_gdata);
+		st_send_frame(chnl_id, st_gdata);
 
 	} else if (len > room) {
 		/* Received packet's payload length is larger.
@@ -157,7 +155,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 		/* Packet header has non-zero payload length and
 		 * we have enough space in created skb. Lets read
 		 * payload data */
-		st_gdata->rx_state = ST_BT_W4_DATA;
+		st_gdata->rx_state = ST_W4_DATA;
 		st_gdata->rx_count = len;
 		return len;
 	}
@@ -167,6 +165,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 	st_gdata->rx_state = ST_W4_PACKET_TYPE;
 	st_gdata->rx_skb = NULL;
 	st_gdata->rx_count = 0;
+	st_gdata->rx_chnl = 0;
 
 	return 0;
 }
@@ -208,13 +207,10 @@ void st_int_recv(void *disc_data,
 	const unsigned char *data, long count)
 {
 	char *ptr;
-	struct hci_event_hdr *eh;
-	struct hci_acl_hdr *ah;
-	struct hci_sco_hdr *sh;
-	struct fm_event_hdr *fm;
-	struct gps_event_hdr *gps;
-	int len = 0, type = 0, dlen = 0;
-	static enum proto_type protoid = ST_MAX;
+	struct st_proto_s *proto;
+	unsigned short payload_len = 0;
+	int len = 0, type = 0;
+	unsigned char *plen;
 	struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
 
 	ptr = (char *)data;
@@ -242,64 +238,36 @@ void st_int_recv(void *disc_data,
 
 			/* Check ST RX state machine , where are we? */
 			switch (st_gdata->rx_state) {
-
-				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
+			/* Waiting for complete packet ? */
+			case ST_W4_DATA:
 				pr_debug("Complete pkt received");
-
 				/* Ask ST CORE to forward
 				 * the packet to protocol driver */
-				st_send_frame(protoid, st_gdata);
+				st_send_frame(st_gdata->rx_chnl, st_gdata);
 
 				st_gdata->rx_state = ST_W4_PACKET_TYPE;
 				st_gdata->rx_skb = NULL;
-				protoid = ST_MAX;	/* is this required ? */
-				continue;
-
-				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-
-				st_check_data_len(st_gdata, protoid, eh->plen);
-				continue;
-
-				/* Waiting for Bluetooth acl header ? */
-			case ST_BT_W4_ACL_HDR:
-				ah = (struct hci_acl_hdr *)st_gdata->rx_skb->
-				    data;
-				dlen = __le16_to_cpu(ah->dlen);
-
-				pr_info("ACL header: dlen %d", dlen);
-
-				st_check_data_len(st_gdata, protoid, dlen);
-				continue;
-
-				/* Waiting for Bluetooth sco header ? */
-			case ST_BT_W4_SCO_HDR:
-				sh = (struct hci_sco_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_info("SCO header: dlen %d", sh->dlen);
-
-				st_check_data_len(st_gdata, protoid, sh->dlen);
-				continue;
-			case ST_FM_W4_EVENT_HDR:
-				fm = (struct fm_event_hdr *)st_gdata->rx_skb->
-				    data;
-				pr_info("FM Header: ");
-				st_check_data_len(st_gdata, ST_FM, fm->plen);
 				continue;
-				/* TODO : Add GPS packet machine logic here */
-			case ST_GPS_W4_EVENT_HDR:
-				/* [0x09 pkt hdr][R/W byte][2 byte len] */
-				gps = (struct gps_event_hdr *)st_gdata->rx_skb->
-				     data;
-				pr_info("GPS Header: ");
-				st_check_data_len(st_gdata, ST_GPS, gps->plen);
+			/* parse the header to know details */
+			case ST_W4_HEADER:
+				proto = st_gdata->list[st_gdata->rx_chnl];
+				plen =
+				&st_gdata->rx_skb->data
+				[proto->offset_len_in_hdr];
+				pr_info("plen pointing to %x\n", *plen);
+				if (proto->len_size == 1)/* 1 byte len field */
+					payload_len = *(unsigned char *)plen;
+				else if (proto->len_size == 2)
+					payload_len =
+					__le16_to_cpu(*(unsigned short *)plen);
+				else
+					pr_info("%s: invalid length "
+					"for id %d\n",
+					__func__, proto->chnl_id);
+				st_check_data_len(st_gdata, proto->chnl_id,
+						payload_len);
+				pr_info("off %d, pay len %d\n",
+					proto->offset_len_in_hdr, payload_len);
 				continue;
 			}	/* end of switch rx_state */
 		}
@@ -308,51 +276,6 @@ void st_int_recv(void *disc_data,
 		/* Check first byte of packet and identify module
 		 * owner (BT/FM/GPS) */
 		switch (*ptr) {
-
-			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			st_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			st_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth acl packet? */
-		case HCI_ACLDATA_PKT:
-			pr_info("ACL packet");
-			st_gdata->rx_state = ST_BT_W4_ACL_HDR;
-			st_gdata->rx_count = HCI_ACL_HDR_SIZE;
-			type = HCI_ACLDATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth sco packet? */
-		case HCI_SCODATA_PKT:
-			pr_info("SCO packet");
-			st_gdata->rx_state = ST_BT_W4_SCO_HDR;
-			st_gdata->rx_count = HCI_SCO_HDR_SIZE;
-			type = HCI_SCODATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Channel 8(FM) packet? */
-		case ST_FM_CH8_PKT:
-			pr_info("FM CH8 packet");
-			type = ST_FM_CH8_PKT;
-			st_gdata->rx_state = ST_FM_W4_EVENT_HDR;
-			st_gdata->rx_count = FM_EVENT_HDR_SIZE;
-			protoid = ST_FM;
-			break;
-
-			/* Channel 9(GPS) packet? */
-		case 0x9:	/*ST_LL_GPS_CH9_PKT */
-			pr_info("GPS CH9 packet");
-			type = 0x9;	/* ST_LL_GPS_CH9_PKT; */
-			protoid = ST_GPS;
-			st_gdata->rx_state = ST_GPS_W4_EVENT_HDR;
-			st_gdata->rx_count = 3;	/* GPS_EVENT_HDR_SIZE -1*/
-			break;
 		case LL_SLEEP_IND:
 		case LL_SLEEP_ACK:
 		case LL_WAKE_UP_IND:
@@ -373,57 +296,22 @@ void st_int_recv(void *disc_data,
 			continue;
 			/* Unknow packet? */
 		default:
-			pr_err("Unknown packet type %2.2x", (__u8) *ptr);
-			ptr++;
-			count--;
-			continue;
+			type = *ptr;
+			st_gdata->rx_skb = alloc_skb(
+					st_gdata->list[type]->max_frame_size,
+					GFP_ATOMIC);
+			skb_reserve(st_gdata->rx_skb,
+					st_gdata->list[type]->reserve);
+			/* next 2 required for BT only */
+			st_gdata->rx_skb->cb[0] = type; /*pkt_type*/
+			st_gdata->rx_skb->cb[1] = 0; /*incoming*/
+			st_gdata->rx_chnl = *ptr;
+			st_gdata->rx_state = ST_W4_HEADER;
+			st_gdata->rx_count = st_gdata->list[type]->hdr_len;
+			pr_info("rx_count %ld\n", st_gdata->rx_count);
 		};
 		ptr++;
 		count--;
-
-		switch (protoid) {
-		case ST_BT:
-			/* Allocate new packet to hold received data */
-			st_gdata->rx_skb =
-			    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			bt_cb(st_gdata->rx_skb)->pkt_type = type;
-			break;
-		case ST_FM:	/* for FM */
-			st_gdata->rx_skb =
-			    alloc_skb(FM_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x08 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = ST_FM_CH8_PKT;
-			break;
-		case ST_GPS:
-			/* for GPS */
-			st_gdata->rx_skb =
-			    alloc_skb(100 /*GPS_MAX_FRAME_SIZE */ , GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x09 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = 0x09;	/*ST_GPS_CH9_PKT; */
-			break;
-		case ST_MAX:
-			break;
-		}
 	}
 	pr_debug("done %s", __func__);
 	return;
@@ -565,20 +453,28 @@ long st_register(struct st_proto_s *new_proto)
 	unsigned long flags = 0;
 
 	st_kim_ref(&st_gdata, 0);
-	pr_info("%s(%d) ", __func__, new_proto->type);
+	pr_info("%s(%d) ", __func__, new_proto->chnl_id);
 	if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
 	    || new_proto->reg_complete_cb == NULL) {
 		pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
+		if (st_gdata == NULL)
+			pr_err("error 1\n");
+		if (new_proto == NULL)
+			pr_err("error 2\n");
+		if (new_proto->recv == NULL)
+			pr_err("error 3\n");
+		if (new_proto->reg_complete_cb == NULL)
+			pr_err("erro 4\n");
 		return -1;
 	}
 
-	if (new_proto->type < ST_BT || new_proto->type >= ST_MAX) {
-		pr_err("protocol %d not supported", new_proto->type);
+	if (new_proto->chnl_id >= ST_MAX_CHANNELS) {
+		pr_err("chnl_id %d not supported", new_proto->chnl_id);
 		return -EPROTONOSUPPORT;
 	}
 
-	if (st_gdata->list[new_proto->type] != NULL) {
-		pr_err("protocol %d already registered", new_proto->type);
+	if (st_gdata->list[new_proto->chnl_id] != NULL) {
+		pr_err("chnl_id %d already registered", new_proto->chnl_id);
 		return -EALREADY;
 	}
 
@@ -586,11 +482,11 @@ long st_register(struct st_proto_s *new_proto)
 	spin_lock_irqsave(&st_gdata->lock, flags);
 
 	if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
-		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->type);
+		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->chnl_id);
 		/* fw download in progress */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
+		st_kim_chip_toggle(new_proto->chnl_id, KIM_GPIO_ACTIVE);
 
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
@@ -598,7 +494,7 @@ long st_register(struct st_proto_s *new_proto)
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return -EINPROGRESS;
 	} else if (st_gdata->protos_registered == ST_EMPTY) {
-		pr_info(" protocol list empty :%d ", new_proto->type);
+		pr_info(" chnl_id list empty :%d ", new_proto->chnl_id);
 		set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 		st_recv = st_kim_recv;
 
@@ -622,9 +518,9 @@ long st_register(struct st_proto_s *new_proto)
 			return -1;
 		}
 
-		/* the protocol might require other gpios to be toggled
+		/* the chnl_id might require other gpios to be toggled
 		 */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
+		st_kim_chip_toggle(new_proto->chnl_id, KIM_GPIO_ACTIVE);
 
 		clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 		st_recv = st_int_recv;
@@ -642,14 +538,14 @@ long st_register(struct st_proto_s *new_proto)
 		/* check for already registered once more,
 		 * since the above check is old
 		 */
-		if (st_gdata->list[new_proto->type] != NULL) {
+		if (st_gdata->list[new_proto->chnl_id] != NULL) {
 			pr_err(" proto %d already registered ",
-				   new_proto->type);
+				   new_proto->chnl_id);
 			return -EALREADY;
 		}
 
 		spin_lock_irqsave(&st_gdata->lock, flags);
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
@@ -657,22 +553,7 @@ long st_register(struct st_proto_s *new_proto)
 	}
 	/* if fw is already downloaded & new stack registers protocol */
 	else {
-		switch (new_proto->type) {
-		case ST_BT:
-			/* do nothing */
-			break;
-		case ST_FM:
-		case ST_GPS:
-			st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-			break;
-		case ST_MAX:
-		default:
-			pr_err("%d protocol not supported",
-				   new_proto->type);
-			spin_unlock_irqrestore(&st_gdata->lock, flags);
-			return -EPROTONOSUPPORT;
-		}
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
@@ -680,48 +561,48 @@ long st_register(struct st_proto_s *new_proto)
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return err;
 	}
-	pr_debug("done %s(%d) ", __func__, new_proto->type);
+	pr_debug("done %s(%d) ", __func__, new_proto->chnl_id);
 }
 EXPORT_SYMBOL_GPL(st_register);
 
 /* to unregister a protocol -
  * to be called from protocol stack driver
  */
-long st_unregister(enum proto_type type)
+long st_unregister(struct st_proto_s *proto)
 {
 	long err = 0;
 	unsigned long flags = 0;
 	struct st_data_s	*st_gdata;
 
-	pr_debug("%s: %d ", __func__, type);
+	pr_debug("%s: %d ", __func__, proto->chnl_id);
 
 	st_kim_ref(&st_gdata, 0);
-	if (type < ST_BT || type >= ST_MAX) {
-		pr_err(" protocol %d not supported", type);
+	if (proto->chnl_id >= ST_MAX_CHANNELS) {
+		pr_err(" chnl_id %d not supported", proto->chnl_id);
 		return -EPROTONOSUPPORT;
 	}
 
 	spin_lock_irqsave(&st_gdata->lock, flags);
 
-	if (st_gdata->list[type] == NULL) {
-		pr_err(" protocol %d not registered", type);
+	if (st_gdata->list[proto->chnl_id] == NULL) {
+		pr_err(" chnl_id %d not registered", proto->chnl_id);
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return -EPROTONOSUPPORT;
 	}
 
 	st_gdata->protos_registered--;
-	st_gdata->list[type] = NULL;
+	remove_channel_from_table(st_gdata, proto);
 
 	/* kim ignores BT in the below function
 	 * and handles the rest, BT is toggled
 	 * only in kim_start and kim_stop
 	 */
-	st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
+	st_kim_chip_toggle(proto->chnl_id, KIM_GPIO_INACTIVE);
 	spin_unlock_irqrestore(&st_gdata->lock, flags);
 
 	if ((st_gdata->protos_registered == ST_EMPTY) &&
 	    (!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
-		pr_info(" all protocols unregistered ");
+		pr_info(" all chnl_ids unregistered ");
 
 		/* stop traffic on tty */
 		if (st_gdata->tty) {
@@ -729,7 +610,7 @@ long st_unregister(enum proto_type type)
 			stop_tty(st_gdata->tty);
 		}
 
-		/* all protocols now unregistered */
+		/* all chnl_ids now unregistered */
 		st_kim_stop(st_gdata->kim_data);
 		/* disable ST LL */
 		st_ll_disable(st_gdata);
@@ -745,7 +626,7 @@ long st_write(struct sk_buff *skb)
 {
 	struct st_data_s *st_gdata;
 #ifdef DEBUG
-	enum proto_type protoid = ST_MAX;
+	unsigned char chnl_id = ST_MAX_CHANNELS;
 #endif
 	long len;
 
@@ -756,22 +637,10 @@ long st_write(struct sk_buff *skb)
 		return -1;
 	}
 #ifdef DEBUG			/* open-up skb to read the 1st byte */
-	switch (skb->data[0]) {
-	case HCI_COMMAND_PKT:
-	case HCI_ACLDATA_PKT:
-	case HCI_SCODATA_PKT:
-		protoid = ST_BT;
-		break;
-	case ST_FM_CH8_PKT:
-		protoid = ST_FM;
-		break;
-	case 0x09:
-		protoid = ST_GPS;
-		break;
-	}
-	if (unlikely(st_gdata->list[protoid] == NULL)) {
-		pr_err(" protocol %d not registered, and writing? ",
-			   protoid);
+	chnl_id = skb->data[0];
+	if (unlikely(st_gdata->list[chnl_id] == NULL)) {
+		pr_err(" chnl_id %d not registered, and writing? ",
+			   chnl_id);
 		return -1;
 	}
 #endif
@@ -824,7 +693,7 @@ static int st_tty_open(struct tty_struct *tty)
 
 static void st_tty_close(struct tty_struct *tty)
 {
-	unsigned char i = ST_MAX;
+	unsigned char i = ST_MAX_CHANNELS;
 	unsigned long flags = 0;
 	struct	st_data_s *st_gdata = tty->disc_data;
 
@@ -835,7 +704,7 @@ static void st_tty_close(struct tty_struct *tty)
 	 * un-installed for some reason - what should be done ?
 	 */
 	spin_lock_irqsave(&st_gdata->lock, flags);
-	for (i = ST_BT; i < ST_MAX; i++) {
+	for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
 		if (st_gdata->list[i] != NULL)
 			pr_err("%d not un-registered", i);
 		st_gdata->list[i] = NULL;
@@ -869,7 +738,7 @@ static void st_tty_close(struct tty_struct *tty)
 static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 			   char *tty_flags, int count)
 {
-
+#define VERBOSE
 #ifdef VERBOSE
 	print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
 		16, 1, data, count, 0);
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 73b6c8b..707c858 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -32,11 +32,7 @@
 #include <linux/sched.h>
 #include <linux/rfkill.h>
 
-/* understand BT events for fw response */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-
+#include <linux/skbuff.h>
 #include <linux/ti_wilink_st.h>
 
 
@@ -134,7 +130,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
 		/* Packet header has non-zero payload length and
 		 * we have enough space in created skb. Lets read
 		 * payload data */
-		kim_gdata->rx_state = ST_BT_W4_DATA;
+		kim_gdata->rx_state = ST_W4_DATA;
 		kim_gdata->rx_count = len;
 		return len;
 	}
@@ -158,8 +154,8 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 	const unsigned char *data, long count)
 {
 	const unsigned char *ptr;
-	struct hci_event_hdr *eh;
 	int len = 0, type = 0;
+	unsigned char *plen;
 
 	pr_debug("%s", __func__);
 	/* Decode received bytes here */
@@ -183,29 +179,27 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 			/* Check ST RX state machine , where are we? */
 			switch (kim_gdata->rx_state) {
 				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
+			case ST_W4_DATA:
 				pr_debug("Complete pkt received");
 				validate_firmware_response(kim_gdata);
 				kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 				kim_gdata->rx_skb = NULL;
 				continue;
 				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)kim_gdata->
-				    rx_skb->data;
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-				kim_check_data_len(kim_gdata, eh->plen);
+			case ST_W4_HEADER:
+				plen =
+				(unsigned char *)&kim_gdata->rx_skb->data[1];
+				pr_debug("event hdr: plen 0x%02x\n", *plen);
+				kim_check_data_len(kim_gdata, *plen);
 				continue;
 			}	/* end of switch */
 		}		/* end of if rx_state */
 		switch (*ptr) {
 			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
+		case 0x04:
+			kim_gdata->rx_state = ST_W4_HEADER;
+			kim_gdata->rx_count = 2;
+			type = *ptr;
 			break;
 		default:
 			pr_info("unknown packet");
@@ -216,16 +210,18 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 		ptr++;
 		count--;
 		kim_gdata->rx_skb =
-		    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			alloc_skb(1024+8, GFP_ATOMIC);
 		if (!kim_gdata->rx_skb) {
 			pr_err("can't allocate mem for new packet");
 			kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 			kim_gdata->rx_count = 0;
 			return;
 		}
-		bt_cb(kim_gdata->rx_skb)->pkt_type = type;
+		skb_reserve(kim_gdata->rx_skb, 8);
+		kim_gdata->rx_skb->cb[0] = 4;
+		kim_gdata->rx_skb->cb[1] = 0;
+
 	}
-	pr_info("done %s", __func__);
 	return;
 }
 
@@ -398,7 +394,7 @@ void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
 			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
 		break;
 
-	case ST_MAX:
+	case ST_MAX_CHANNELS:
 	default:
 		break;
 	}
@@ -416,7 +412,6 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
 	struct kim_data_s	*kim_gdata = st_gdata->kim_data;
 
-	pr_info(" %s ", __func__);
 	/* copy to local buffer */
 	if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
 		/* must be the read_ver_cmd */
@@ -578,7 +573,7 @@ static int kim_toggle_radio(void *data, bool blocked)
 		else
 			st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
 	break;
-	case ST_MAX:
+	case ST_MAX_CHANNELS:
 		pr_err(" wrong proto type ");
 	break;
 	}
@@ -664,12 +659,13 @@ static int kim_probe(struct platform_device *pdev)
 	/* refer to itself */
 	kim_gdata->core_data->kim_data = kim_gdata;
 
-	for (proto = 0; proto < ST_MAX; proto++) {
+	for (proto = 0; proto < ST_MAX_CHANNELS; proto++) {
 		kim_gdata->gpios[proto] = gpios[proto];
 		pr_info(" %ld gpio to be requested", gpios[proto]);
 	}
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+	for (proto = 0; (proto < ST_MAX_CHANNELS)
+			&& (gpios[proto] != -1); proto++) {
 		/* Claim the Bluetooth/FM/GPIO
 		 * nShutdown gpio from the system
 		 */
@@ -704,7 +700,8 @@ static int kim_probe(struct platform_device *pdev)
 	init_completion(&kim_gdata->kim_rcvd);
 	init_completion(&kim_gdata->ldisc_installed);
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+	for (proto = 0; (proto < ST_MAX_CHANNELS)
+			&& (gpios[proto] != -1); proto++) {
 		/* TODO: should all types be rfkill_type_bt ? */
 		kim_gdata->rf_protos[proto] = proto;
 		kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
@@ -752,7 +749,8 @@ static int kim_remove(struct platform_device *pdev)
 
 	kim_gdata = dev_get_drvdata(&pdev->dev);
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+	for (proto = 0; (proto < ST_MAX_CHANNELS)
+		&& (gpios[proto] != -1); proto++) {
 		/* Claim the Bluetooth/FM/GPIO
 		 * nShutdown gpio from the system
 		 */
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 4c7be22..1674ca7 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -42,7 +42,7 @@ enum proto_type {
 	ST_BT,
 	ST_FM,
 	ST_GPS,
-	ST_MAX,
+	ST_MAX_CHANNELS = 16,
 };
 
 /**
@@ -62,6 +62,17 @@ enum proto_type {
  * @priv_data: privdate data holder for the protocol drivers, sent
  *	from the protocol drivers during registration, and sent back on
  *	reg_complete_cb and recv.
+ * @chnl_id: channel id the protocol driver is interested in, the channel
+ *	id is nothing but the 1st byte of the packet in UART frame.
+ * @max_frame_size: size of the largest frame the protocol can receive.
+ * @hdr_len: length of the header structure of the protocol.
+ * @offset_len_in_hdr: this provides the offset of the length field in the
+ *	header structure of the protocol header, to assist ST to know
+ *	how much to receive, if the data is split across UART frames.
+ * @len_size: whether the length field inside the header is 2 bytes
+ *	or 1 byte.
+ * @reserve: the number of bytes ST needs to reserve in the skb being
+ *	prepared for the protocol driver.
  */
 struct st_proto_s {
 	enum proto_type type;
@@ -70,10 +81,17 @@ struct st_proto_s {
 	void (*reg_complete_cb) (void *, char data);
 	long (*write) (struct sk_buff *skb);
 	void *priv_data;
+
+	unsigned char chnl_id;
+	unsigned short max_frame_size;
+	unsigned char hdr_len;
+	unsigned char offset_len_in_hdr;
+	unsigned char len_size;
+	unsigned char reserve;
 };
 
 extern long st_register(struct st_proto_s *);
-extern long st_unregister(enum proto_type);
+extern long st_unregister(struct st_proto_s *);
 
 
 /*
@@ -114,6 +132,7 @@ extern long st_unregister(enum proto_type);
  * @rx_skb: the skb where all data for a protocol gets accumulated,
  *	since tty might not call receive when a complete event packet
  *	is received, the states, count and the skb needs to be maintained.
+ * @rx_chnl: the channel ID for which the data is getting accumalated for.
  * @txq: the list of skbs which needs to be sent onto the TTY.
  * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
  *	up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
@@ -135,10 +154,11 @@ struct st_data_s {
 #define ST_TX_SENDING	1
 #define ST_TX_WAKEUP	2
 	unsigned long tx_state;
-	struct st_proto_s *list[ST_MAX];
+	struct st_proto_s *list[ST_MAX_CHANNELS];
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
+	unsigned char rx_chnl;
 	struct sk_buff_head txq, tx_waitq;
 	spinlock_t lock;
 	unsigned char	protos_registered;
@@ -243,12 +263,12 @@ struct kim_data_s {
 	struct completion kim_rcvd, ldisc_installed;
 	char resp_buffer[30];
 	const struct firmware *fw_entry;
-	long gpios[ST_MAX];
+	long gpios[ST_MAX_CHANNELS];
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
-	struct rfkill *rfkill[ST_MAX];
-	enum proto_type rf_protos[ST_MAX];
+	struct rfkill *rfkill[ST_MAX_CHANNELS];
+	enum proto_type rf_protos[ST_MAX_CHANNELS];
 	struct st_data_s *core_data;
 	struct chip_version version;
 };
@@ -338,12 +358,8 @@ struct hci_command {
 
 /* ST LL receiver states */
 #define ST_W4_PACKET_TYPE       0
-#define ST_BT_W4_EVENT_HDR      1
-#define ST_BT_W4_ACL_HDR        2
-#define ST_BT_W4_SCO_HDR        3
-#define ST_BT_W4_DATA           4
-#define ST_FM_W4_EVENT_HDR      5
-#define ST_GPS_W4_EVENT_HDR	6
+#define ST_W4_HEADER		1
+#define ST_W4_DATA		2
 
 /* ST LL state machines */
 #define ST_LL_ASLEEP               0
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs
  2011-02-02 11:00 ` [PATCH 1/7] drivers:misc: ti-st: register with channel IDs pavan_savoy
@ 2011-02-02 11:00   ` pavan_savoy
  2011-02-02 11:00     ` [PATCH 3/7] drivers:misc: ti-st: fix error codes pavan_savoy
  2011-02-04  0:03     ` [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs Greg KH
  0 siblings, 2 replies; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

The communication between ST KIM and UIM was interfaced
over the /dev/rfkill device node.
Move the interface to a simpler less abusive sysfs entry
mechanism.

Shared transport driver would now read the UART details
originally received by bootloader or firmware as platform
data.
The data read will be shared over sysfs entries for the user-space
UIM or other n/w manager/plugins to be read, and assist the driver
by opening up the UART, setting the baud-rate and installing the
line discipline.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_kim.c  |  244 +++++++++++++++++++++---------------------
 include/linux/ti_wilink_st.h |   19 +++-
 2 files changed, 138 insertions(+), 125 deletions(-)

diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 707c858..a7fda81 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -30,46 +30,12 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/sched.h>
-#include <linux/rfkill.h>
+#include <linux/tty.h>
 
 #include <linux/skbuff.h>
 #include <linux/ti_wilink_st.h>
 
 
-static int kim_probe(struct platform_device *pdev);
-static int kim_remove(struct platform_device *pdev);
-
-/* KIM platform device driver structure */
-static struct platform_driver kim_platform_driver = {
-	.probe = kim_probe,
-	.remove = kim_remove,
-	/* TODO: ST driver power management during suspend/resume ?
-	 */
-#if 0
-	.suspend = kim_suspend,
-	.resume = kim_resume,
-#endif
-	.driver = {
-		   .name = "kim",
-		   .owner = THIS_MODULE,
-		   },
-};
-
-static int kim_toggle_radio(void*, bool);
-static const struct rfkill_ops kim_rfkill_ops = {
-	.set_block = kim_toggle_radio,
-};
-
-/* strings to be used for rfkill entries and by
- * ST Core to be used for sysfs debug entry
- */
-#define PROTO_ENTRY(type, name)	name
-const unsigned char *protocol_names[] = {
-	PROTO_ENTRY(ST_BT, "Bluetooth"),
-	PROTO_ENTRY(ST_FM, "FM"),
-	PROTO_ENTRY(ST_GPS, "GPS"),
-};
-
 #define MAX_ST_DEVICES	3	/* Imagine 1 on each UART for now */
 static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
 
@@ -371,8 +337,7 @@ void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
 	kim_gdata = dev_get_drvdata(&kim_pdev->dev);
 
 	if (kim_gdata->gpios[type] == -1) {
-		pr_info(" gpio not requested for protocol %s",
-			   protocol_names[type]);
+		pr_info("gpio not requested for protocol %d", type);
 		return;
 	}
 	switch (type) {
@@ -450,11 +415,6 @@ long st_kim_start(void *kim_data)
 	pr_info(" %s", __func__);
 
 	do {
-		/* TODO: this is only because rfkill sub-system
-		 * doesn't send events to user-space if the state
-		 * isn't changed
-		 */
-		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
 		/* Configure BT nShutdown to HIGH state */
 		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
 		mdelay(5);	/* FIXME: a proper toggle */
@@ -462,22 +422,20 @@ long st_kim_start(void *kim_data)
 		mdelay(100);
 		/* re-initialize the completion */
 		INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
-		/* send signal to UIM */
-		err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
-		if (err != 0) {
-			pr_info(" sending SIGUSR2 to uim failed %ld", err);
-			err = -1;
-			continue;
-		}
-#endif
-		/* unblock and send event to UIM via /dev/rfkill */
-		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
+		/* send notification to UIM */
+		kim_gdata->ldisc_install = 1;
+		pr_info("ldisc_install = 1");
+		sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+				NULL, "install");
 		/* wait for ldisc to be installed */
 		err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
 				msecs_to_jiffies(LDISC_TIME));
 		if (!err) {	/* timeout */
 			pr_err("line disc installation timed out ");
+			kim_gdata->ldisc_install = 0;
+			pr_info("ldisc_install = 0");
+			sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+					NULL, "install");
 			err = -1;
 			continue;
 		} else {
@@ -486,6 +444,10 @@ long st_kim_start(void *kim_data)
 			err = download_firmware(kim_gdata);
 			if (err != 0) {
 				pr_err("download firmware failed");
+				kim_gdata->ldisc_install = 0;
+				pr_info("ldisc_install = 0");
+				sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+						NULL, "install");
 				continue;
 			} else {	/* on success don't retry */
 				break;
@@ -505,16 +467,15 @@ long st_kim_stop(void *kim_data)
 	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
 
 	INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
-	/* send signal to UIM */
-	err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
-	if (err != 0) {
-		pr_err("sending SIGUSR2 to uim failed %ld", err);
-		return -1;
-	}
-#endif
-	/* set BT rfkill to be blocked */
-	err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
+
+	/* Flush any pending characters in the driver and discipline. */
+	tty_ldisc_flush(kim_gdata->core_data->tty);
+	tty_driver_flush_buffer(kim_gdata->core_data->tty);
+
+	/* send uninstall notification to UIM */
+	pr_info("ldisc_install = 0");
+	kim_gdata->ldisc_install = 0;
+	sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
 
 	/* wait for ldisc to be un-installed */
 	err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
@@ -553,33 +514,59 @@ static int show_list(struct seq_file *s, void *unused)
 	return 0;
 }
 
-/* function called from rfkill subsystem, when someone from
- * user space would write 0/1 on the sysfs entry
- * /sys/class/rfkill/rfkill0,1,3/state
- */
-static int kim_toggle_radio(void *data, bool blocked)
+static ssize_t show_install(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
-	enum proto_type type = *((enum proto_type *)data);
-	pr_debug(" %s: %d ", __func__, type);
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", kim_data->ldisc_install);
+}
 
-	switch (type) {
-	case ST_BT:
-		/* do nothing */
-	break;
-	case ST_FM:
-	case ST_GPS:
-		if (blocked)
-			st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
-		else
-			st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
-	break;
-	case ST_MAX_CHANNELS:
-		pr_err(" wrong proto type ");
-	break;
-	}
-	return 0;
+static ssize_t show_dev_name(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%s\n", kim_data->dev_name);
+}
+
+static ssize_t show_baud_rate(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%ld\n", kim_data->baud_rate);
+}
+
+static ssize_t show_flow_cntrl(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", kim_data->flow_cntrl);
 }
 
+/* structures specific for sysfs entries */
+static struct kobj_attribute ldisc_install =
+__ATTR(install, 0444, (void *)show_install, NULL);
+
+static struct kobj_attribute uart_dev_name =
+__ATTR(dev_name, 0444, (void *)show_dev_name, NULL);
+
+static struct kobj_attribute uart_baud_rate =
+__ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL);
+
+static struct kobj_attribute uart_flow_cntrl =
+__ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL);
+
+static struct attribute *uim_attrs[] = {
+	&ldisc_install.attr,
+	&uart_dev_name.attr,
+	&uart_baud_rate.attr,
+	&uart_flow_cntrl.attr,
+	NULL,
+};
+
+static struct attribute_group uim_attr_grp = {
+	.attrs = uim_attrs,
+};
+
 /**
  * st_kim_ref - reference the core's data
  *	This references the per-ST platform device in the arch/xx/
@@ -633,8 +620,9 @@ static int kim_probe(struct platform_device *pdev)
 {
 	long status;
 	long proto;
-	long *gpios = pdev->dev.platform_data;
 	struct kim_data_s	*kim_gdata;
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
+	long *gpios = pdata->gpios;
 
 	if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
 		/* multiple devices could exist */
@@ -700,30 +688,18 @@ static int kim_probe(struct platform_device *pdev)
 	init_completion(&kim_gdata->kim_rcvd);
 	init_completion(&kim_gdata->ldisc_installed);
 
-	for (proto = 0; (proto < ST_MAX_CHANNELS)
-			&& (gpios[proto] != -1); proto++) {
-		/* TODO: should all types be rfkill_type_bt ? */
-		kim_gdata->rf_protos[proto] = proto;
-		kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
-			&pdev->dev, RFKILL_TYPE_BLUETOOTH,
-			&kim_rfkill_ops, &kim_gdata->rf_protos[proto]);
-		if (kim_gdata->rfkill[proto] == NULL) {
-			pr_err("cannot create rfkill entry for gpio %ld",
-				   gpios[proto]);
-			continue;
-		}
-		/* block upon creation */
-		rfkill_init_sw_state(kim_gdata->rfkill[proto], 1);
-		status = rfkill_register(kim_gdata->rfkill[proto]);
-		if (unlikely(status)) {
-			pr_err("rfkill registration failed for gpio %ld",
-				   gpios[proto]);
-			rfkill_unregister(kim_gdata->rfkill[proto]);
-			continue;
-		}
-		pr_info("rfkill entry created for %ld", gpios[proto]);
+	status = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
+	if (status) {
+		pr_err("failed to create sysfs entries");
+		return status;
 	}
 
+	/* copying platform data */
+	strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN);
+	kim_gdata->flow_cntrl = pdata->flow_cntrl;
+	kim_gdata->baud_rate = pdata->baud_rate;
+	pr_info("sysfs entries created\n");
+
 	kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
 	if (IS_ERR(kim_debugfs_dir)) {
 		pr_err(" debugfs entries creation failed ");
@@ -741,9 +717,9 @@ static int kim_probe(struct platform_device *pdev)
 
 static int kim_remove(struct platform_device *pdev)
 {
-	/* free the GPIOs requested
-	 */
-	long *gpios = pdev->dev.platform_data;
+	/* free the GPIOs requested */
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
+	long *gpios = pdata->gpios;
 	long proto;
 	struct kim_data_s	*kim_gdata;
 
@@ -755,12 +731,11 @@ static int kim_remove(struct platform_device *pdev)
 		 * nShutdown gpio from the system
 		 */
 		gpio_free(gpios[proto]);
-		rfkill_unregister(kim_gdata->rfkill[proto]);
-		rfkill_destroy(kim_gdata->rfkill[proto]);
-		kim_gdata->rfkill[proto] = NULL;
 	}
 	pr_info("kim: GPIO Freed");
 	debugfs_remove_recursive(kim_debugfs_dir);
+
+	sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
 	kim_gdata->kim_pdev = NULL;
 	st_core_exit(kim_gdata->core_data);
 
@@ -769,23 +744,46 @@ static int kim_remove(struct platform_device *pdev)
 	return 0;
 }
 
+int kim_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
+
+	if (pdata->suspend)
+		return pdata->suspend(pdev, state);
+
+	return -EOPNOTSUPP;
+}
+
+int kim_resume(struct platform_device *pdev)
+{
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
+
+	if (pdata->resume)
+		return pdata->resume(pdev);
+
+	return -EOPNOTSUPP;
+}
+
 /**********************************************************************/
 /* entry point for ST KIM module, called in from ST Core */
+static struct platform_driver kim_platform_driver = {
+	.probe = kim_probe,
+	.remove = kim_remove,
+	.suspend = kim_suspend,
+	.resume = kim_resume,
+	.driver = {
+		.name = "kim",
+		.owner = THIS_MODULE,
+	},
+};
 
 static int __init st_kim_init(void)
 {
-	long ret = 0;
-	ret = platform_driver_register(&kim_platform_driver);
-	if (ret != 0) {
-		pr_err("platform drv registration failed");
-		return -1;
-	}
-	return 0;
+	return platform_driver_register(&kim_platform_driver);
 }
 
 static void __exit st_kim_deinit(void)
 {
-	/* the following returns void */
 	platform_driver_unregister(&kim_platform_driver);
 }
 
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 1674ca7..010cda7 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -206,8 +206,8 @@ void gps_chrdrv_stub_init(void);
 /* time in msec to wait for
  * line discipline to be installed
  */
-#define LDISC_TIME	500
-#define CMD_RESP_TIME	500
+#define LDISC_TIME	1000
+#define CMD_RESP_TIME	800
 #define MAKEWORD(a, b)  ((unsigned short)(((unsigned char)(a)) \
 	| ((unsigned short)((unsigned char)(b))) << 8))
 
@@ -230,6 +230,7 @@ struct chip_version {
 	unsigned short maj_ver;
 };
 
+#define UART_DEV_NAME_LEN 32
 /**
  * struct kim_data_s - the KIM internal data, embedded as the
  *	platform's drv data. One for each ST device in the system.
@@ -271,6 +272,10 @@ struct kim_data_s {
 	enum proto_type rf_protos[ST_MAX_CHANNELS];
 	struct st_data_s *core_data;
 	struct chip_version version;
+	unsigned char ldisc_install;
+	unsigned char dev_name[UART_DEV_NAME_LEN];
+	unsigned char flow_cntrl;
+	unsigned long baud_rate;
 };
 
 /**
@@ -413,4 +418,14 @@ struct gps_event_hdr {
 	u16 plen;
 } __attribute__ ((packed));
 
+/* platform data */
+struct ti_st_plat_data {
+	long gpios[ST_MAX_CHANNELS]; /* BT, FM and GPS */
+	unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
+	unsigned char flow_cntrl; /* flow control flag */
+	unsigned long baud_rate;
+	int (*suspend)(struct platform_device *, pm_message_t);
+	int (*resume)(struct platform_device *);
+};
+
 #endif /* TI_WILINK_ST_H */
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 3/7] drivers:misc: ti-st: fix error codes
  2011-02-02 11:00   ` [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs pavan_savoy
@ 2011-02-02 11:00     ` pavan_savoy
  2011-02-02 11:00       ` [PATCH 4/7] drivers:misc: ti-st: set right debug levels for logs pavan_savoy
  2011-02-04  0:03     ` [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs Greg KH
  1 sibling, 1 reply; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

set-right the error codes that the shared transport driver
returns.
Instead of magic numbers like -1, return relevant codes such as
ETIMEDOUT or EIO, EAGAIN when wait times out or uart write bytes don't
match expected value or when registration fails and needs to be
attempted again.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_core.c |   31 ++++++++++++++-----------------
 drivers/misc/ti-st/st_kim.c  |   18 +++++++++---------
 drivers/misc/ti-st/st_ll.c   |    2 +-
 3 files changed, 24 insertions(+), 27 deletions(-)

diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 84d73c5..79d2dc3 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -65,7 +65,7 @@ int st_int_write(struct st_data_s *st_gdata,
 	struct tty_struct *tty;
 	if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
 		pr_err("tty unavailable to perform write");
-		return -1;
+		return -EINVAL;
 	}
 	tty = st_gdata->tty;
 #ifdef VERBOSE
@@ -124,9 +124,15 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 	pr_info(" %s ", __func__);
 	for (i = 0; i < ST_MAX_CHANNELS; i++) {
 		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
-			   st_gdata->list[i]->reg_complete_cb != NULL))
+			   st_gdata->list[i]->reg_complete_cb != NULL)) {
 			st_gdata->list[i]->reg_complete_cb
 				(st_gdata->list[i]->priv_data, err);
+			pr_info("protocol %d's cb sent %d\n", i, err);
+			if (err) { /* cleanup registered protocol */
+				st_gdata->protos_registered--;
+				st_gdata->list[i] = NULL;
+			}
+		}
 	}
 }
 
@@ -457,15 +463,7 @@ long st_register(struct st_proto_s *new_proto)
 	if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
 	    || new_proto->reg_complete_cb == NULL) {
 		pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
-		if (st_gdata == NULL)
-			pr_err("error 1\n");
-		if (new_proto == NULL)
-			pr_err("error 2\n");
-		if (new_proto->recv == NULL)
-			pr_err("error 3\n");
-		if (new_proto->reg_complete_cb == NULL)
-			pr_err("erro 4\n");
-		return -1;
+		return -EINVAL;
 	}
 
 	if (new_proto->chnl_id >= ST_MAX_CHANNELS) {
@@ -512,10 +510,9 @@ long st_register(struct st_proto_s *new_proto)
 			if ((st_gdata->protos_registered != ST_EMPTY) &&
 			    (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
 				pr_err(" KIM failure complete callback ");
-				st_reg_complete(st_gdata, -1);
+				st_reg_complete(st_gdata, err);
 			}
-
-			return -1;
+			return -EINVAL;
 		}
 
 		/* the chnl_id might require other gpios to be toggled
@@ -634,14 +631,14 @@ long st_write(struct sk_buff *skb)
 	if (unlikely(skb == NULL || st_gdata == NULL
 		|| st_gdata->tty == NULL)) {
 		pr_err("data/tty unavailable to perform write");
-		return -1;
+		return -EINVAL;
 	}
 #ifdef DEBUG			/* open-up skb to read the 1st byte */
 	chnl_id = skb->data[0];
 	if (unlikely(st_gdata->list[chnl_id] == NULL)) {
 		pr_err(" chnl_id %d not registered, and writing? ",
 			   chnl_id);
-		return -1;
+		return -EINVAL;
 	}
 #endif
 	pr_debug("%d to be written", skb->len);
@@ -829,7 +826,7 @@ int st_core_init(struct st_data_s **core_data)
 		err = tty_unregister_ldisc(N_TI_WL);
 		if (err)
 			pr_err("unable to un-register ldisc");
-		return -1;
+		return err;
 	}
 	*core_data = st_gdata;
 	return 0;
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index a7fda81..ccc46a7 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -201,13 +201,13 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 	INIT_COMPLETION(kim_gdata->kim_rcvd);
 	if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
 		pr_err("kim: couldn't write 4 bytes");
-		return -1;
+		return -EIO;
 	}
 
 	if (!wait_for_completion_timeout
 	    (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
 		pr_err(" waiting for ver info- timed out ");
-		return -1;
+		return -ETIMEDOUT;
 	}
 
 	version =
@@ -257,7 +257,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 		     (kim_gdata->fw_entry->size == 0))) {
 		pr_err(" request_firmware failed(errno %ld) for %s", err,
 			   bts_scr_name);
-		return -1;
+		return -EINVAL;
 	}
 	ptr = (void *)kim_gdata->fw_entry->data;
 	len = kim_gdata->fw_entry->size;
@@ -292,7 +292,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 					   ((struct bts_action *)ptr)->size);
 			if (unlikely(err < 0)) {
 				release_firmware(kim_gdata->fw_entry);
-				return -1;
+				return err;
 			}
 			if (!wait_for_completion_timeout
 			    (&kim_gdata->kim_rcvd,
@@ -301,7 +301,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 				    (" response timeout during fw download ");
 				/* timed out */
 				release_firmware(kim_gdata->fw_entry);
-				return -1;
+				return -ETIMEDOUT;
 			}
 			break;
 		case ACTION_DELAY:	/* sleep */
@@ -436,7 +436,7 @@ long st_kim_start(void *kim_data)
 			pr_info("ldisc_install = 0");
 			sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
 					NULL, "install");
-			err = -1;
+			err = -ETIMEDOUT;
 			continue;
 		} else {
 			/* ldisc installed now */
@@ -482,7 +482,7 @@ long st_kim_stop(void *kim_data)
 			msecs_to_jiffies(LDISC_TIME));
 	if (!err) {		/* timeout */
 		pr_err(" timed out waiting for ldisc to be un-installed");
-		return -1;
+		return -ETIMEDOUT;
 	}
 
 	/* By default configure BT nShutdown to LOW state */
@@ -642,7 +642,7 @@ static int kim_probe(struct platform_device *pdev)
 	status = st_core_init(&kim_gdata->core_data);
 	if (status != 0) {
 		pr_err(" ST core init failed");
-		return -1;
+		return -EIO;
 	}
 	/* refer to itself */
 	kim_gdata->core_data->kim_data = kim_gdata;
@@ -704,7 +704,7 @@ static int kim_probe(struct platform_device *pdev)
 	if (IS_ERR(kim_debugfs_dir)) {
 		pr_err(" debugfs entries creation failed ");
 		kim_debugfs_dir = NULL;
-		return -1;
+		return -EIO;
 	}
 
 	debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c
index 2bda8de..f72de6b 100644
--- a/drivers/misc/ti-st/st_ll.c
+++ b/drivers/misc/ti-st/st_ll.c
@@ -130,7 +130,7 @@ unsigned long st_ll_sleep_state(struct st_data_s *st_data,
 		break;
 	default:
 		pr_err(" unknown input/state ");
-		return -1;
+		return -EINVAL;
 	}
 	return 0;
 }
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 4/7] drivers:misc: ti-st: set right debug levels for logs
  2011-02-02 11:00     ` [PATCH 3/7] drivers:misc: ti-st: fix error codes pavan_savoy
@ 2011-02-02 11:00       ` pavan_savoy
  2011-02-02 11:00         ` [PATCH 5/7] drivers:misc: ti-st: firmware download optimization pavan_savoy
  0 siblings, 1 reply; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

pr_debug-ing few pr_infos from the data paths such as tty receive and
write so as to reduce debugs when we have higher logging levels enabled
undef VERBOSE in receive to avoid huge logs when log level 8 is set.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_core.c |   19 +++++++++----------
 drivers/misc/ti-st/st_ll.c   |    8 ++++----
 2 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 79d2dc3..f7bb96f 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -82,7 +82,7 @@ int st_int_write(struct st_data_s *st_gdata,
  */
 void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
 {
-	pr_info(" %s(prot:%d) ", __func__, chnl_id);
+	pr_debug(" %s(prot:%d) ", __func__, chnl_id);
 
 	if (unlikely
 	    (st_gdata == NULL || st_gdata->rx_skb == NULL
@@ -226,7 +226,7 @@ void st_int_recv(void *disc_data,
 		return;
 	}
 
-	pr_info("count %ld rx_state %ld"
+	pr_debug("count %ld rx_state %ld"
 		   "rx_count %ld", count, st_gdata->rx_state,
 		   st_gdata->rx_count);
 
@@ -260,7 +260,7 @@ void st_int_recv(void *disc_data,
 				plen =
 				&st_gdata->rx_skb->data
 				[proto->offset_len_in_hdr];
-				pr_info("plen pointing to %x\n", *plen);
+				pr_debug("plen pointing to %x\n", *plen);
 				if (proto->len_size == 1)/* 1 byte len field */
 					payload_len = *(unsigned char *)plen;
 				else if (proto->len_size == 2)
@@ -272,7 +272,7 @@ void st_int_recv(void *disc_data,
 					__func__, proto->chnl_id);
 				st_check_data_len(st_gdata, proto->chnl_id,
 						payload_len);
-				pr_info("off %d, pay len %d\n",
+				pr_debug("off %d, pay len %d\n",
 					proto->offset_len_in_hdr, payload_len);
 				continue;
 			}	/* end of switch rx_state */
@@ -285,7 +285,7 @@ void st_int_recv(void *disc_data,
 		case LL_SLEEP_IND:
 		case LL_SLEEP_ACK:
 		case LL_WAKE_UP_IND:
-			pr_info("PM packet");
+			pr_debug("PM packet");
 			/* this takes appropriate action based on
 			 * sleep state received --
 			 */
@@ -294,7 +294,7 @@ void st_int_recv(void *disc_data,
 			count--;
 			continue;
 		case LL_WAKE_UP_ACK:
-			pr_info("PM packet");
+			pr_debug("PM packet");
 			/* wake up ack received */
 			st_wakeup_ack(st_gdata, *ptr);
 			ptr++;
@@ -314,7 +314,7 @@ void st_int_recv(void *disc_data,
 			st_gdata->rx_chnl = *ptr;
 			st_gdata->rx_state = ST_W4_HEADER;
 			st_gdata->rx_count = st_gdata->list[type]->hdr_len;
-			pr_info("rx_count %ld\n", st_gdata->rx_count);
+			pr_debug("rx_count %ld\n", st_gdata->rx_count);
 		};
 		ptr++;
 		count--;
@@ -360,7 +360,7 @@ void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
 
 	switch (st_ll_getstate(st_gdata)) {
 	case ST_LL_AWAKE:
-		pr_info("ST LL is AWAKE, sending normally");
+		pr_debug("ST LL is AWAKE, sending normally");
 		skb_queue_tail(&st_gdata->txq, skb);
 		break;
 	case ST_LL_ASLEEP_TO_AWAKE:
@@ -400,7 +400,7 @@ void st_tx_wakeup(struct st_data_s *st_data)
 	pr_debug("%s", __func__);
 	/* check for sending & set flag sending here */
 	if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
-		pr_info("ST already sending");
+		pr_debug("ST already sending");
 		/* keep sending */
 		set_bit(ST_TX_WAKEUP, &st_data->tx_state);
 		return;
@@ -735,7 +735,6 @@ static void st_tty_close(struct tty_struct *tty)
 static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 			   char *tty_flags, int count)
 {
-#define VERBOSE
 #ifdef VERBOSE
 	print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
 		16, 1, data, count, 0);
diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c
index f72de6b..3f24951 100644
--- a/drivers/misc/ti-st/st_ll.c
+++ b/drivers/misc/ti-st/st_ll.c
@@ -30,7 +30,7 @@ static void send_ll_cmd(struct st_data_s *st_data,
 	unsigned char cmd)
 {
 
-	pr_info("%s: writing %x", __func__, cmd);
+	pr_debug("%s: writing %x", __func__, cmd);
 	st_int_write(st_data, &cmd, 1);
 	return;
 }
@@ -114,18 +114,18 @@ unsigned long st_ll_sleep_state(struct st_data_s *st_data,
 {
 	switch (cmd) {
 	case LL_SLEEP_IND:	/* sleep ind */
-		pr_info("sleep indication recvd");
+		pr_debug("sleep indication recvd");
 		ll_device_want_to_sleep(st_data);
 		break;
 	case LL_SLEEP_ACK:	/* sleep ack */
 		pr_err("sleep ack rcvd: host shouldn't");
 		break;
 	case LL_WAKE_UP_IND:	/* wake ind */
-		pr_info("wake indication recvd");
+		pr_debug("wake indication recvd");
 		ll_device_want_to_wakeup(st_data);
 		break;
 	case LL_WAKE_UP_ACK:	/* wake ack */
-		pr_info("wake ack rcvd");
+		pr_debug("wake ack rcvd");
 		st_data->ll_state = ST_LL_AWAKE;
 		break;
 	default:
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 5/7] drivers:misc: ti-st: firmware download optimization
  2011-02-02 11:00       ` [PATCH 4/7] drivers:misc: ti-st: set right debug levels for logs pavan_savoy
@ 2011-02-02 11:00         ` pavan_savoy
  2011-02-02 11:00           ` [PATCH 6/7] drivers:misc: ti-st: fix hci-ll on wake_ind collision pavan_savoy
  0 siblings, 1 reply; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

To fasten the process of firmware download, the chip allows
disabling of the command complete event generation from host.
In these cases, only few very essential commands would have
the command complete events and hence the wait associated with
them.

So now the driver would wait for a command complete event, only
when it comes across a wait event during firmware parsing.
This would also mean we need to skip not just the change baud
rate command but also the wait for it.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_core.c |   18 +++++++++
 drivers/misc/ti-st/st_kim.c  |   80 ++++++++++++++++++++++++++++++++++++++----
 include/linux/ti_wilink_st.h |    6 +++
 3 files changed, 97 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f7bb96f..dd2c879 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -52,6 +52,24 @@ static void remove_channel_from_table(struct st_data_s *st_gdata,
 	st_gdata->list[proto->chnl_id] = NULL;
 }
 
+/*
+ * called from KIM during firmware download.
+ *
+ * This is a wrapper function to tty->ops->write_room.
+ * It returns number of free space available in
+ * uart tx buffer.
+ */
+int st_get_uart_wr_room(struct st_data_s *st_gdata)
+{
+	struct tty_struct *tty;
+	if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
+		pr_err("tty unavailable to perform write");
+		return -1;
+	}
+	tty = st_gdata->tty;
+	return tty->ops->write_room(tty);
+}
+
 /* can be called in from
  * -- KIM (during fw download)
  * -- ST Core (during st_write)
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index ccc46a7..2c096cc 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -232,6 +232,26 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 	return 0;
 }
 
+void skip_change_remote_baud(unsigned char **ptr, long *len)
+{
+	unsigned char *nxt_action, *cur_action;
+	cur_action = *ptr;
+
+	nxt_action = cur_action + sizeof(struct bts_action) +
+		((struct bts_action *) cur_action)->size;
+
+	if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
+		pr_err("invalid action after change remote baud command");
+	} else {
+		*ptr = *ptr + sizeof(struct bts_action) +
+			((struct bts_action *)nxt_action)->size;
+		*len = *len - (sizeof(struct bts_action) +
+				((struct bts_action *)nxt_action)->size);
+		/* warn user on not commenting these in firmware */
+		pr_warn("skipping the wait event of change remote baud");
+	}
+}
+
 /**
  * download_firmware -
  *	internal function which parses through the .bts firmware
@@ -244,6 +264,9 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 	unsigned char *ptr = NULL;
 	unsigned char *action_ptr = NULL;
 	unsigned char bts_scr_name[30] = { 0 };	/* 30 char long bts scr name? */
+	int wr_room_space;
+	int cmd_size;
+	unsigned long timeout;
 
 	err = read_local_version(kim_gdata, bts_scr_name);
 	if (err != 0) {
@@ -280,13 +303,43 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 			     0xFF36)) {
 				/* ignore remote change
 				 * baud rate HCI VS command */
-				pr_err
-				    (" change remote baud"
+				pr_warn("change remote baud"
 				    " rate command in firmware");
+				skip_change_remote_baud(&ptr, &len);
 				break;
 			}
+			/*
+			 * Make sure we have enough free space in uart
+			 * tx buffer to write current firmware command
+			 */
+			cmd_size = ((struct bts_action *)ptr)->size;
+			timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME);
+			do {
+				wr_room_space =
+					st_get_uart_wr_room(kim_gdata->core_data);
+				if (wr_room_space < 0) {
+					pr_err("Unable to get free "
+							"space info from uart tx buffer");
+					release_firmware(kim_gdata->fw_entry);
+					return wr_room_space;
+				}
+				mdelay(1); /* wait 1ms before checking room */
+			} while ((wr_room_space < cmd_size) &&
+					time_before(jiffies, timeout));
+
+			/* Timeout happened ? */
+			if (time_after_eq(jiffies, timeout)) {
+				pr_err("Timeout while waiting for free "
+						"free space in uart tx buffer");
+				release_firmware(kim_gdata->fw_entry);
+				return -ETIMEDOUT;
+			}
 
-			INIT_COMPLETION(kim_gdata->kim_rcvd);
+			/*
+			 * Free space found in uart buffer, call st_int_write
+			 * to send current firmware command to the uart tx
+			 * buffer.
+			 */
 			err = st_int_write(kim_gdata->core_data,
 			((struct bts_action_send *)action_ptr)->data,
 					   ((struct bts_action *)ptr)->size);
@@ -294,15 +347,28 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 				release_firmware(kim_gdata->fw_entry);
 				return err;
 			}
+			/*
+			 * Check number of bytes written to the uart tx buffer
+			 * and requested command write size
+			 */
+			if (err != cmd_size) {
+				pr_err("Number of bytes written to uart "
+						"tx buffer are not matching with "
+						"requested cmd write size");
+				release_firmware(kim_gdata->fw_entry);
+				return -EIO;
+			}
+			break;
+		case ACTION_WAIT_EVENT:  /* wait */
 			if (!wait_for_completion_timeout
-			    (&kim_gdata->kim_rcvd,
-			     msecs_to_jiffies(CMD_RESP_TIME))) {
-				pr_err
-				    (" response timeout during fw download ");
+					(&kim_gdata->kim_rcvd,
+					 msecs_to_jiffies(CMD_RESP_TIME))) {
+				pr_err("response timeout during fw download ");
 				/* timed out */
 				release_firmware(kim_gdata->fw_entry);
 				return -ETIMEDOUT;
 			}
+			INIT_COMPLETION(kim_gdata->kim_rcvd);
 			break;
 		case ACTION_DELAY:	/* sleep */
 			pr_info("sleep command in scr");
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 010cda7..7885a77 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -166,6 +166,11 @@ struct st_data_s {
 	void *kim_data;
 };
 
+/*
+ * wrapper around tty->ops->write_room to check
+ * availability during firmware download
+ */
+int st_get_uart_wr_room(struct st_data_s *st_gdata);
 /**
  * st_int_write -
  * point this to tty->driver->write or tty->ops->write
@@ -208,6 +213,7 @@ void gps_chrdrv_stub_init(void);
  */
 #define LDISC_TIME	1000
 #define CMD_RESP_TIME	800
+#define CMD_WR_TIME	5000
 #define MAKEWORD(a, b)  ((unsigned short)(((unsigned char)(a)) \
 	| ((unsigned short)((unsigned char)(b))) << 8))
 
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 6/7] drivers:misc: ti-st: fix hci-ll on wake_ind collision
  2011-02-02 11:00         ` [PATCH 5/7] drivers:misc: ti-st: firmware download optimization pavan_savoy
@ 2011-02-02 11:00           ` pavan_savoy
  2011-02-02 11:00             ` [PATCH 7/7] drivers:misc: ti-st: remove multiple gpio handling pavan_savoy
  0 siblings, 1 reply; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

Where file-transfer stops/pauses in between, is
result of a HCI-LL anamoly in ST LL driver.
ST LL did not copy the contents of WaitQ into the TxQ, when a WAKEUP_IND
collision happened.
Make also sure, that the copying mechanism is safe, by wrapping it around
spin locks inside st_int_recv().
This was easily reproduced when the sleep timeout was reduced to 100ms
for HCI-LL.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_core.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index dd2c879..f0d24d8 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -236,6 +236,7 @@ void st_int_recv(void *disc_data,
 	int len = 0, type = 0;
 	unsigned char *plen;
 	struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
+	unsigned long flags;
 
 	ptr = (char *)data;
 	/* tty_receive sent null ? */
@@ -248,6 +249,7 @@ void st_int_recv(void *disc_data,
 		   "rx_count %ld", count, st_gdata->rx_state,
 		   st_gdata->rx_count);
 
+	spin_lock_irqsave(&st_gdata->lock, flags);
 	/* Decode received bytes here */
 	while (count) {
 		if (st_gdata->rx_count) {
@@ -308,13 +310,25 @@ void st_int_recv(void *disc_data,
 			 * sleep state received --
 			 */
 			st_ll_sleep_state(st_gdata, *ptr);
+			/* if WAKEUP_IND collides copy from waitq to txq
+			 * and assume chip awake
+			 */
+			spin_unlock_irqrestore(&st_gdata->lock, flags);
+			if (st_ll_getstate(st_gdata) == ST_LL_AWAKE)
+				st_wakeup_ack(st_gdata, LL_WAKE_UP_ACK);
+			spin_lock_irqsave(&st_gdata->lock, flags);
+
 			ptr++;
 			count--;
 			continue;
 		case LL_WAKE_UP_ACK:
 			pr_debug("PM packet");
+
+			spin_unlock_irqrestore(&st_gdata->lock, flags);
 			/* wake up ack received */
 			st_wakeup_ack(st_gdata, *ptr);
+			spin_lock_irqsave(&st_gdata->lock, flags);
+
 			ptr++;
 			count--;
 			continue;
@@ -337,6 +351,7 @@ void st_int_recv(void *disc_data,
 		ptr++;
 		count--;
 	}
+	spin_unlock_irqrestore(&st_gdata->lock, flags);
 	pr_debug("done %s", __func__);
 	return;
 }
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 7/7] drivers:misc: ti-st: remove multiple gpio handling
  2011-02-02 11:00           ` [PATCH 6/7] drivers:misc: ti-st: fix hci-ll on wake_ind collision pavan_savoy
@ 2011-02-02 11:00             ` pavan_savoy
  0 siblings, 0 replies; 10+ messages in thread
From: pavan_savoy @ 2011-02-02 11:00 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

TI shared transport driver previously intended to expose rfkill
entries for each of the protocol gpio that the chip would have.
However now in case such gpios exist, which requires to be enabled
for a specific protocol, the responsibility lay on protocol driver.
This patch removes the request/free of multiple gpios, rfkill struct
references and also removes the chip_toggle function.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_core.c |   11 ----
 drivers/misc/ti-st/st_kim.c  |  117 +++++++++---------------------------------
 include/linux/ti_wilink_st.h |   19 +------
 3 files changed, 26 insertions(+), 121 deletions(-)

diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f0d24d8..1847c47 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -515,7 +515,6 @@ long st_register(struct st_proto_s *new_proto)
 	if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
 		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->chnl_id);
 		/* fw download in progress */
-		st_kim_chip_toggle(new_proto->chnl_id, KIM_GPIO_ACTIVE);
 
 		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
@@ -548,10 +547,6 @@ long st_register(struct st_proto_s *new_proto)
 			return -EINVAL;
 		}
 
-		/* the chnl_id might require other gpios to be toggled
-		 */
-		st_kim_chip_toggle(new_proto->chnl_id, KIM_GPIO_ACTIVE);
-
 		clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 		st_recv = st_int_recv;
 
@@ -622,12 +617,6 @@ long st_unregister(struct st_proto_s *proto)
 
 	st_gdata->protos_registered--;
 	remove_channel_from_table(st_gdata, proto);
-
-	/* kim ignores BT in the below function
-	 * and handles the rest, BT is toggled
-	 * only in kim_start and kim_stop
-	 */
-	st_kim_chip_toggle(proto->chnl_id, KIM_GPIO_INACTIVE);
 	spin_unlock_irqrestore(&st_gdata->lock, flags);
 
 	if ((st_gdata->protos_registered == ST_EMPTY) &&
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 2c096cc..9ee4c78 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -390,49 +390,6 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 
 /**********************************************************************/
 /* functions called from ST core */
-/* function to toggle the GPIO
- * needs to know whether the GPIO is active high or active low
- */
-void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
-{
-	struct platform_device	*kim_pdev;
-	struct kim_data_s	*kim_gdata;
-	pr_info(" %s ", __func__);
-
-	kim_pdev = st_get_plat_device(0);
-	kim_gdata = dev_get_drvdata(&kim_pdev->dev);
-
-	if (kim_gdata->gpios[type] == -1) {
-		pr_info("gpio not requested for protocol %d", type);
-		return;
-	}
-	switch (type) {
-	case ST_BT:
-		/*Do Nothing */
-		break;
-
-	case ST_FM:
-		if (state == KIM_GPIO_ACTIVE)
-			gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_LOW);
-		else
-			gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_HIGH);
-		break;
-
-	case ST_GPS:
-		if (state == KIM_GPIO_ACTIVE)
-			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_HIGH);
-		else
-			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
-		break;
-
-	case ST_MAX_CHANNELS:
-	default:
-		break;
-	}
-
-	return;
-}
-
 /* called from ST Core, when REG_IN_PROGRESS (registration in progress)
  * can be because of
  * 1. response to read local version
@@ -482,9 +439,9 @@ long st_kim_start(void *kim_data)
 
 	do {
 		/* Configure BT nShutdown to HIGH state */
-		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+		gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 		mdelay(5);	/* FIXME: a proper toggle */
-		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+		gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
 		mdelay(100);
 		/* re-initialize the completion */
 		INIT_COMPLETION(kim_gdata->ldisc_installed);
@@ -552,11 +509,11 @@ long st_kim_stop(void *kim_data)
 	}
 
 	/* By default configure BT nShutdown to LOW state */
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 	mdelay(1);
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+	gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
 	mdelay(1);
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 	return err;
 }
 
@@ -685,10 +642,8 @@ struct dentry *kim_debugfs_dir;
 static int kim_probe(struct platform_device *pdev)
 {
 	long status;
-	long proto;
 	struct kim_data_s	*kim_gdata;
 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
-	long *gpios = pdata->gpios;
 
 	if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
 		/* multiple devices could exist */
@@ -713,40 +668,19 @@ static int kim_probe(struct platform_device *pdev)
 	/* refer to itself */
 	kim_gdata->core_data->kim_data = kim_gdata;
 
-	for (proto = 0; proto < ST_MAX_CHANNELS; proto++) {
-		kim_gdata->gpios[proto] = gpios[proto];
-		pr_info(" %ld gpio to be requested", gpios[proto]);
+	/* Claim the chip enable nShutdown gpio from the system */
+	kim_gdata->nshutdown = pdata->nshutdown_gpio;
+	status = gpio_request(kim_gdata->nshutdown, "kim");
+	if (unlikely(status)) {
+		pr_err(" gpio %ld request failed ", kim_gdata->nshutdown);
+		return status;
 	}
 
-	for (proto = 0; (proto < ST_MAX_CHANNELS)
-			&& (gpios[proto] != -1); proto++) {
-		/* Claim the Bluetooth/FM/GPIO
-		 * nShutdown gpio from the system
-		 */
-		status = gpio_request(gpios[proto], "kim");
-		if (unlikely(status)) {
-			pr_err(" gpio %ld request failed ", gpios[proto]);
-			proto -= 1;
-			while (proto >= 0) {
-				if (gpios[proto] != -1)
-					gpio_free(gpios[proto]);
-			}
-			return status;
-		}
-
-		/* Configure nShutdown GPIO as output=0 */
-		status =
-		    gpio_direction_output(gpios[proto], 0);
-		if (unlikely(status)) {
-			pr_err(" unable to configure gpio %ld",
-				   gpios[proto]);
-			proto -= 1;
-			while (proto >= 0) {
-				if (gpios[proto] != -1)
-					gpio_free(gpios[proto]);
-			}
-			return status;
-		}
+	/* Configure nShutdown GPIO as output=0 */
+	status = gpio_direction_output(kim_gdata->nshutdown, 0);
+	if (unlikely(status)) {
+		pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown);
+		return status;
 	}
 	/* get reference of pdev for request_firmware
 	 */
@@ -785,23 +719,20 @@ static int kim_remove(struct platform_device *pdev)
 {
 	/* free the GPIOs requested */
 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
-	long *gpios = pdata->gpios;
-	long proto;
 	struct kim_data_s	*kim_gdata;
 
 	kim_gdata = dev_get_drvdata(&pdev->dev);
 
-	for (proto = 0; (proto < ST_MAX_CHANNELS)
-		&& (gpios[proto] != -1); proto++) {
-		/* Claim the Bluetooth/FM/GPIO
-		 * nShutdown gpio from the system
-		 */
-		gpio_free(gpios[proto]);
-	}
-	pr_info("kim: GPIO Freed");
-	debugfs_remove_recursive(kim_debugfs_dir);
+	/* Free the Bluetooth/FM/GPIO
+	 * nShutdown gpio from the system
+	 */
+	gpio_free(pdata->nshutdown_gpio);
+	pr_info("nshutdown GPIO Freed");
 
+	debugfs_remove_recursive(kim_debugfs_dir);
 	sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
+	pr_info("sysfs entries removed");
+
 	kim_gdata->kim_pdev = NULL;
 	st_core_exit(kim_gdata->core_data);
 
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 7885a77..7071ec5 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -26,15 +26,6 @@
 #define TI_WILINK_ST_H
 
 /**
- * enum kim_gpio_state - Few protocols such as FM have ACTIVE LOW
- *	gpio states for their chip/core enable gpios
- */
-enum kim_gpio_state {
-	KIM_GPIO_INACTIVE,
-	KIM_GPIO_ACTIVE,
-};
-
-/**
  * enum proto-type - The protocol on WiLink chips which share a
  *	common physical interface like UART.
  */
@@ -252,14 +243,11 @@ struct chip_version {
  *	the ldisc was properly installed.
  * @resp_buffer: data buffer for the .bts fw file name.
  * @fw_entry: firmware class struct to request/release the fw.
- * @gpios: the list of core/chip enable gpios for BT, FM and GPS cores.
  * @rx_state: the rx state for kim's receive func during fw download.
  * @rx_count: the rx count for the kim's receive func during fw download.
  * @rx_skb: all of fw data might not come at once, and hence data storage for
  *	whole of the fw response, only HCI_EVENTs and hence diff from ST's
  *	response.
- * @rfkill: rfkill data for each of the cores to be registered with rfkill.
- * @rf_protos: proto types of the data registered with rfkill sub-system.
  * @core_data: ST core's data, which mainly is the tty's disc_data
  * @version: chip version available via a sysfs entry.
  *
@@ -270,12 +258,10 @@ struct kim_data_s {
 	struct completion kim_rcvd, ldisc_installed;
 	char resp_buffer[30];
 	const struct firmware *fw_entry;
-	long gpios[ST_MAX_CHANNELS];
+	long nshutdown;
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
-	struct rfkill *rfkill[ST_MAX_CHANNELS];
-	enum proto_type rf_protos[ST_MAX_CHANNELS];
 	struct st_data_s *core_data;
 	struct chip_version version;
 	unsigned char ldisc_install;
@@ -293,7 +279,6 @@ long st_kim_start(void *);
 long st_kim_stop(void *);
 
 void st_kim_recv(void *, const unsigned char *, long count);
-void st_kim_chip_toggle(enum proto_type, enum kim_gpio_state);
 void st_kim_complete(void *);
 void kim_st_list_protocols(struct st_data_s *, void *);
 
@@ -426,7 +411,7 @@ struct gps_event_hdr {
 
 /* platform data */
 struct ti_st_plat_data {
-	long gpios[ST_MAX_CHANNELS]; /* BT, FM and GPS */
+	long nshutdown_gpio;
 	unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
 	unsigned char flow_cntrl; /* flow control flag */
 	unsigned long baud_rate;
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs
  2011-02-02 11:00   ` [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs pavan_savoy
  2011-02-02 11:00     ` [PATCH 3/7] drivers:misc: ti-st: fix error codes pavan_savoy
@ 2011-02-04  0:03     ` Greg KH
  1 sibling, 0 replies; 10+ messages in thread
From: Greg KH @ 2011-02-04  0:03 UTC (permalink / raw)
  To: pavan_savoy; +Cc: linux-kernel, gregkh

On Wed, Feb 02, 2011 at 05:00:43AM -0600, pavan_savoy@ti.com wrote:
> From: Pavan Savoy <pavan_savoy@ti.com>
> 
> The communication between ST KIM and UIM was interfaced
> over the /dev/rfkill device node.
> Move the interface to a simpler less abusive sysfs entry
> mechanism.

That's nice, but you need to document all sysfs files in
Documentation/ABI/

Can you please do that in this patch and resend the series?

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/7] drivers:misc: ti-st: register with channel IDs
  2011-02-04  8:23 [PATCH 0/7] TI ST patches for new requirements pavan_savoy
@ 2011-02-04  8:23 ` pavan_savoy
  0 siblings, 0 replies; 10+ messages in thread
From: pavan_savoy @ 2011-02-04  8:23 UTC (permalink / raw)
  To: linux-kernel, gregkh; +Cc: Pavan Savoy

From: Pavan Savoy <pavan_savoy@ti.com>

The architecture of shared transport had begun with individual
protocols like bluetooth, fm and gps telling the shared transport
what sort of protocol they are and then expecting the ST driver
to parse the incoming data from chip and forward data only
relevant to the protocol drivers.

This change would mean each protocol drivers would also send
information to ST driver as to how to intrepret their protocol
data coming out of the chip.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
 drivers/misc/ti-st/st_core.c |  355 +++++++++++++-----------------------------
 drivers/misc/ti-st/st_kim.c  |   56 ++++----
 include/linux/ti_wilink_st.h |   40 ++++--
 3 files changed, 167 insertions(+), 284 deletions(-)

diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f9aad06..84d73c5 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -25,10 +25,9 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 
-/* understand BT, FM and GPS for now */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
+#include <linux/seq_file.h>
+#include <linux/skbuff.h>
+
 #include <linux/ti_wilink_st.h>
 
 /* function pointer pointing to either,
@@ -38,21 +37,20 @@
 void (*st_recv) (void*, const unsigned char*, long);
 
 /********************************************************************/
-#if 0
-/* internal misc functions */
-bool is_protocol_list_empty(void)
+static void add_channel_to_table(struct st_data_s *st_gdata,
+		struct st_proto_s *new_proto)
 {
-	unsigned char i = 0;
-	pr_debug(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
-		if (st_gdata->list[i] != NULL)
-			return ST_NOTEMPTY;
-		/* not empty */
-	}
-	/* list empty */
-	return ST_EMPTY;
+	pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
+	/* list now has the channel id as index itself */
+	st_gdata->list[new_proto->chnl_id] = new_proto;
+}
+
+static void remove_channel_from_table(struct st_data_s *st_gdata,
+		struct st_proto_s *proto)
+{
+	pr_info("%s: id %d\n", __func__, proto->chnl_id);
+	st_gdata->list[proto->chnl_id] = NULL;
 }
-#endif
 
 /* can be called in from
  * -- KIM (during fw download)
@@ -82,15 +80,15 @@ int st_int_write(struct st_data_s *st_gdata,
  * push the skb received to relevant
  * protocol stacks
  */
-void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
+void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
 {
-	pr_info(" %s(prot:%d) ", __func__, protoid);
+	pr_info(" %s(prot:%d) ", __func__, chnl_id);
 
 	if (unlikely
 	    (st_gdata == NULL || st_gdata->rx_skb == NULL
-	     || st_gdata->list[protoid] == NULL)) {
-		pr_err("protocol %d not registered, no data to send?",
-			   protoid);
+	     || st_gdata->list[chnl_id] == NULL)) {
+		pr_err("chnl_id %d not registered, no data to send?",
+			   chnl_id);
 		kfree_skb(st_gdata->rx_skb);
 		return;
 	}
@@ -99,17 +97,17 @@ void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
 	 * - should be just skb_queue_tail for the
 	 *   protocol stack driver
 	 */
-	if (likely(st_gdata->list[protoid]->recv != NULL)) {
+	if (likely(st_gdata->list[chnl_id]->recv != NULL)) {
 		if (unlikely
-			(st_gdata->list[protoid]->recv
-			(st_gdata->list[protoid]->priv_data, st_gdata->rx_skb)
+			(st_gdata->list[chnl_id]->recv
+			(st_gdata->list[chnl_id]->priv_data, st_gdata->rx_skb)
 			     != 0)) {
-			pr_err(" proto stack %d's ->recv failed", protoid);
+			pr_err(" proto stack %d's ->recv failed", chnl_id);
 			kfree_skb(st_gdata->rx_skb);
 			return;
 		}
 	} else {
-		pr_err(" proto stack %d's ->recv null", protoid);
+		pr_err(" proto stack %d's ->recv null", chnl_id);
 		kfree_skb(st_gdata->rx_skb);
 	}
 	return;
@@ -124,7 +122,7 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 {
 	unsigned char i = 0;
 	pr_info(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
+	for (i = 0; i < ST_MAX_CHANNELS; i++) {
 		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
 			   st_gdata->list[i]->reg_complete_cb != NULL))
 			st_gdata->list[i]->reg_complete_cb
@@ -133,7 +131,7 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 }
 
 static inline int st_check_data_len(struct st_data_s *st_gdata,
-	int protoid, int len)
+	unsigned char chnl_id, int len)
 {
 	int room = skb_tailroom(st_gdata->rx_skb);
 
@@ -144,7 +142,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 		 * has zero length payload. So, ask ST CORE to
 		 * forward the packet to protocol driver (BT/FM/GPS)
 		 */
-		st_send_frame(protoid, st_gdata);
+		st_send_frame(chnl_id, st_gdata);
 
 	} else if (len > room) {
 		/* Received packet's payload length is larger.
@@ -157,7 +155,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 		/* Packet header has non-zero payload length and
 		 * we have enough space in created skb. Lets read
 		 * payload data */
-		st_gdata->rx_state = ST_BT_W4_DATA;
+		st_gdata->rx_state = ST_W4_DATA;
 		st_gdata->rx_count = len;
 		return len;
 	}
@@ -167,6 +165,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 	st_gdata->rx_state = ST_W4_PACKET_TYPE;
 	st_gdata->rx_skb = NULL;
 	st_gdata->rx_count = 0;
+	st_gdata->rx_chnl = 0;
 
 	return 0;
 }
@@ -208,13 +207,10 @@ void st_int_recv(void *disc_data,
 	const unsigned char *data, long count)
 {
 	char *ptr;
-	struct hci_event_hdr *eh;
-	struct hci_acl_hdr *ah;
-	struct hci_sco_hdr *sh;
-	struct fm_event_hdr *fm;
-	struct gps_event_hdr *gps;
-	int len = 0, type = 0, dlen = 0;
-	static enum proto_type protoid = ST_MAX;
+	struct st_proto_s *proto;
+	unsigned short payload_len = 0;
+	int len = 0, type = 0;
+	unsigned char *plen;
 	struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
 
 	ptr = (char *)data;
@@ -242,64 +238,36 @@ void st_int_recv(void *disc_data,
 
 			/* Check ST RX state machine , where are we? */
 			switch (st_gdata->rx_state) {
-
-				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
+			/* Waiting for complete packet ? */
+			case ST_W4_DATA:
 				pr_debug("Complete pkt received");
-
 				/* Ask ST CORE to forward
 				 * the packet to protocol driver */
-				st_send_frame(protoid, st_gdata);
+				st_send_frame(st_gdata->rx_chnl, st_gdata);
 
 				st_gdata->rx_state = ST_W4_PACKET_TYPE;
 				st_gdata->rx_skb = NULL;
-				protoid = ST_MAX;	/* is this required ? */
-				continue;
-
-				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-
-				st_check_data_len(st_gdata, protoid, eh->plen);
-				continue;
-
-				/* Waiting for Bluetooth acl header ? */
-			case ST_BT_W4_ACL_HDR:
-				ah = (struct hci_acl_hdr *)st_gdata->rx_skb->
-				    data;
-				dlen = __le16_to_cpu(ah->dlen);
-
-				pr_info("ACL header: dlen %d", dlen);
-
-				st_check_data_len(st_gdata, protoid, dlen);
-				continue;
-
-				/* Waiting for Bluetooth sco header ? */
-			case ST_BT_W4_SCO_HDR:
-				sh = (struct hci_sco_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_info("SCO header: dlen %d", sh->dlen);
-
-				st_check_data_len(st_gdata, protoid, sh->dlen);
-				continue;
-			case ST_FM_W4_EVENT_HDR:
-				fm = (struct fm_event_hdr *)st_gdata->rx_skb->
-				    data;
-				pr_info("FM Header: ");
-				st_check_data_len(st_gdata, ST_FM, fm->plen);
 				continue;
-				/* TODO : Add GPS packet machine logic here */
-			case ST_GPS_W4_EVENT_HDR:
-				/* [0x09 pkt hdr][R/W byte][2 byte len] */
-				gps = (struct gps_event_hdr *)st_gdata->rx_skb->
-				     data;
-				pr_info("GPS Header: ");
-				st_check_data_len(st_gdata, ST_GPS, gps->plen);
+			/* parse the header to know details */
+			case ST_W4_HEADER:
+				proto = st_gdata->list[st_gdata->rx_chnl];
+				plen =
+				&st_gdata->rx_skb->data
+				[proto->offset_len_in_hdr];
+				pr_info("plen pointing to %x\n", *plen);
+				if (proto->len_size == 1)/* 1 byte len field */
+					payload_len = *(unsigned char *)plen;
+				else if (proto->len_size == 2)
+					payload_len =
+					__le16_to_cpu(*(unsigned short *)plen);
+				else
+					pr_info("%s: invalid length "
+					"for id %d\n",
+					__func__, proto->chnl_id);
+				st_check_data_len(st_gdata, proto->chnl_id,
+						payload_len);
+				pr_info("off %d, pay len %d\n",
+					proto->offset_len_in_hdr, payload_len);
 				continue;
 			}	/* end of switch rx_state */
 		}
@@ -308,51 +276,6 @@ void st_int_recv(void *disc_data,
 		/* Check first byte of packet and identify module
 		 * owner (BT/FM/GPS) */
 		switch (*ptr) {
-
-			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			st_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			st_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth acl packet? */
-		case HCI_ACLDATA_PKT:
-			pr_info("ACL packet");
-			st_gdata->rx_state = ST_BT_W4_ACL_HDR;
-			st_gdata->rx_count = HCI_ACL_HDR_SIZE;
-			type = HCI_ACLDATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth sco packet? */
-		case HCI_SCODATA_PKT:
-			pr_info("SCO packet");
-			st_gdata->rx_state = ST_BT_W4_SCO_HDR;
-			st_gdata->rx_count = HCI_SCO_HDR_SIZE;
-			type = HCI_SCODATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Channel 8(FM) packet? */
-		case ST_FM_CH8_PKT:
-			pr_info("FM CH8 packet");
-			type = ST_FM_CH8_PKT;
-			st_gdata->rx_state = ST_FM_W4_EVENT_HDR;
-			st_gdata->rx_count = FM_EVENT_HDR_SIZE;
-			protoid = ST_FM;
-			break;
-
-			/* Channel 9(GPS) packet? */
-		case 0x9:	/*ST_LL_GPS_CH9_PKT */
-			pr_info("GPS CH9 packet");
-			type = 0x9;	/* ST_LL_GPS_CH9_PKT; */
-			protoid = ST_GPS;
-			st_gdata->rx_state = ST_GPS_W4_EVENT_HDR;
-			st_gdata->rx_count = 3;	/* GPS_EVENT_HDR_SIZE -1*/
-			break;
 		case LL_SLEEP_IND:
 		case LL_SLEEP_ACK:
 		case LL_WAKE_UP_IND:
@@ -373,57 +296,22 @@ void st_int_recv(void *disc_data,
 			continue;
 			/* Unknow packet? */
 		default:
-			pr_err("Unknown packet type %2.2x", (__u8) *ptr);
-			ptr++;
-			count--;
-			continue;
+			type = *ptr;
+			st_gdata->rx_skb = alloc_skb(
+					st_gdata->list[type]->max_frame_size,
+					GFP_ATOMIC);
+			skb_reserve(st_gdata->rx_skb,
+					st_gdata->list[type]->reserve);
+			/* next 2 required for BT only */
+			st_gdata->rx_skb->cb[0] = type; /*pkt_type*/
+			st_gdata->rx_skb->cb[1] = 0; /*incoming*/
+			st_gdata->rx_chnl = *ptr;
+			st_gdata->rx_state = ST_W4_HEADER;
+			st_gdata->rx_count = st_gdata->list[type]->hdr_len;
+			pr_info("rx_count %ld\n", st_gdata->rx_count);
 		};
 		ptr++;
 		count--;
-
-		switch (protoid) {
-		case ST_BT:
-			/* Allocate new packet to hold received data */
-			st_gdata->rx_skb =
-			    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			bt_cb(st_gdata->rx_skb)->pkt_type = type;
-			break;
-		case ST_FM:	/* for FM */
-			st_gdata->rx_skb =
-			    alloc_skb(FM_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x08 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = ST_FM_CH8_PKT;
-			break;
-		case ST_GPS:
-			/* for GPS */
-			st_gdata->rx_skb =
-			    alloc_skb(100 /*GPS_MAX_FRAME_SIZE */ , GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x09 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = 0x09;	/*ST_GPS_CH9_PKT; */
-			break;
-		case ST_MAX:
-			break;
-		}
 	}
 	pr_debug("done %s", __func__);
 	return;
@@ -565,20 +453,28 @@ long st_register(struct st_proto_s *new_proto)
 	unsigned long flags = 0;
 
 	st_kim_ref(&st_gdata, 0);
-	pr_info("%s(%d) ", __func__, new_proto->type);
+	pr_info("%s(%d) ", __func__, new_proto->chnl_id);
 	if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
 	    || new_proto->reg_complete_cb == NULL) {
 		pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
+		if (st_gdata == NULL)
+			pr_err("error 1\n");
+		if (new_proto == NULL)
+			pr_err("error 2\n");
+		if (new_proto->recv == NULL)
+			pr_err("error 3\n");
+		if (new_proto->reg_complete_cb == NULL)
+			pr_err("erro 4\n");
 		return -1;
 	}
 
-	if (new_proto->type < ST_BT || new_proto->type >= ST_MAX) {
-		pr_err("protocol %d not supported", new_proto->type);
+	if (new_proto->chnl_id >= ST_MAX_CHANNELS) {
+		pr_err("chnl_id %d not supported", new_proto->chnl_id);
 		return -EPROTONOSUPPORT;
 	}
 
-	if (st_gdata->list[new_proto->type] != NULL) {
-		pr_err("protocol %d already registered", new_proto->type);
+	if (st_gdata->list[new_proto->chnl_id] != NULL) {
+		pr_err("chnl_id %d already registered", new_proto->chnl_id);
 		return -EALREADY;
 	}
 
@@ -586,11 +482,11 @@ long st_register(struct st_proto_s *new_proto)
 	spin_lock_irqsave(&st_gdata->lock, flags);
 
 	if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
-		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->type);
+		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->chnl_id);
 		/* fw download in progress */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
+		st_kim_chip_toggle(new_proto->chnl_id, KIM_GPIO_ACTIVE);
 
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
@@ -598,7 +494,7 @@ long st_register(struct st_proto_s *new_proto)
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return -EINPROGRESS;
 	} else if (st_gdata->protos_registered == ST_EMPTY) {
-		pr_info(" protocol list empty :%d ", new_proto->type);
+		pr_info(" chnl_id list empty :%d ", new_proto->chnl_id);
 		set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 		st_recv = st_kim_recv;
 
@@ -622,9 +518,9 @@ long st_register(struct st_proto_s *new_proto)
 			return -1;
 		}
 
-		/* the protocol might require other gpios to be toggled
+		/* the chnl_id might require other gpios to be toggled
 		 */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
+		st_kim_chip_toggle(new_proto->chnl_id, KIM_GPIO_ACTIVE);
 
 		clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 		st_recv = st_int_recv;
@@ -642,14 +538,14 @@ long st_register(struct st_proto_s *new_proto)
 		/* check for already registered once more,
 		 * since the above check is old
 		 */
-		if (st_gdata->list[new_proto->type] != NULL) {
+		if (st_gdata->list[new_proto->chnl_id] != NULL) {
 			pr_err(" proto %d already registered ",
-				   new_proto->type);
+				   new_proto->chnl_id);
 			return -EALREADY;
 		}
 
 		spin_lock_irqsave(&st_gdata->lock, flags);
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
@@ -657,22 +553,7 @@ long st_register(struct st_proto_s *new_proto)
 	}
 	/* if fw is already downloaded & new stack registers protocol */
 	else {
-		switch (new_proto->type) {
-		case ST_BT:
-			/* do nothing */
-			break;
-		case ST_FM:
-		case ST_GPS:
-			st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-			break;
-		case ST_MAX:
-		default:
-			pr_err("%d protocol not supported",
-				   new_proto->type);
-			spin_unlock_irqrestore(&st_gdata->lock, flags);
-			return -EPROTONOSUPPORT;
-		}
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
@@ -680,48 +561,48 @@ long st_register(struct st_proto_s *new_proto)
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return err;
 	}
-	pr_debug("done %s(%d) ", __func__, new_proto->type);
+	pr_debug("done %s(%d) ", __func__, new_proto->chnl_id);
 }
 EXPORT_SYMBOL_GPL(st_register);
 
 /* to unregister a protocol -
  * to be called from protocol stack driver
  */
-long st_unregister(enum proto_type type)
+long st_unregister(struct st_proto_s *proto)
 {
 	long err = 0;
 	unsigned long flags = 0;
 	struct st_data_s	*st_gdata;
 
-	pr_debug("%s: %d ", __func__, type);
+	pr_debug("%s: %d ", __func__, proto->chnl_id);
 
 	st_kim_ref(&st_gdata, 0);
-	if (type < ST_BT || type >= ST_MAX) {
-		pr_err(" protocol %d not supported", type);
+	if (proto->chnl_id >= ST_MAX_CHANNELS) {
+		pr_err(" chnl_id %d not supported", proto->chnl_id);
 		return -EPROTONOSUPPORT;
 	}
 
 	spin_lock_irqsave(&st_gdata->lock, flags);
 
-	if (st_gdata->list[type] == NULL) {
-		pr_err(" protocol %d not registered", type);
+	if (st_gdata->list[proto->chnl_id] == NULL) {
+		pr_err(" chnl_id %d not registered", proto->chnl_id);
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return -EPROTONOSUPPORT;
 	}
 
 	st_gdata->protos_registered--;
-	st_gdata->list[type] = NULL;
+	remove_channel_from_table(st_gdata, proto);
 
 	/* kim ignores BT in the below function
 	 * and handles the rest, BT is toggled
 	 * only in kim_start and kim_stop
 	 */
-	st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
+	st_kim_chip_toggle(proto->chnl_id, KIM_GPIO_INACTIVE);
 	spin_unlock_irqrestore(&st_gdata->lock, flags);
 
 	if ((st_gdata->protos_registered == ST_EMPTY) &&
 	    (!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
-		pr_info(" all protocols unregistered ");
+		pr_info(" all chnl_ids unregistered ");
 
 		/* stop traffic on tty */
 		if (st_gdata->tty) {
@@ -729,7 +610,7 @@ long st_unregister(enum proto_type type)
 			stop_tty(st_gdata->tty);
 		}
 
-		/* all protocols now unregistered */
+		/* all chnl_ids now unregistered */
 		st_kim_stop(st_gdata->kim_data);
 		/* disable ST LL */
 		st_ll_disable(st_gdata);
@@ -745,7 +626,7 @@ long st_write(struct sk_buff *skb)
 {
 	struct st_data_s *st_gdata;
 #ifdef DEBUG
-	enum proto_type protoid = ST_MAX;
+	unsigned char chnl_id = ST_MAX_CHANNELS;
 #endif
 	long len;
 
@@ -756,22 +637,10 @@ long st_write(struct sk_buff *skb)
 		return -1;
 	}
 #ifdef DEBUG			/* open-up skb to read the 1st byte */
-	switch (skb->data[0]) {
-	case HCI_COMMAND_PKT:
-	case HCI_ACLDATA_PKT:
-	case HCI_SCODATA_PKT:
-		protoid = ST_BT;
-		break;
-	case ST_FM_CH8_PKT:
-		protoid = ST_FM;
-		break;
-	case 0x09:
-		protoid = ST_GPS;
-		break;
-	}
-	if (unlikely(st_gdata->list[protoid] == NULL)) {
-		pr_err(" protocol %d not registered, and writing? ",
-			   protoid);
+	chnl_id = skb->data[0];
+	if (unlikely(st_gdata->list[chnl_id] == NULL)) {
+		pr_err(" chnl_id %d not registered, and writing? ",
+			   chnl_id);
 		return -1;
 	}
 #endif
@@ -824,7 +693,7 @@ static int st_tty_open(struct tty_struct *tty)
 
 static void st_tty_close(struct tty_struct *tty)
 {
-	unsigned char i = ST_MAX;
+	unsigned char i = ST_MAX_CHANNELS;
 	unsigned long flags = 0;
 	struct	st_data_s *st_gdata = tty->disc_data;
 
@@ -835,7 +704,7 @@ static void st_tty_close(struct tty_struct *tty)
 	 * un-installed for some reason - what should be done ?
 	 */
 	spin_lock_irqsave(&st_gdata->lock, flags);
-	for (i = ST_BT; i < ST_MAX; i++) {
+	for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
 		if (st_gdata->list[i] != NULL)
 			pr_err("%d not un-registered", i);
 		st_gdata->list[i] = NULL;
@@ -869,7 +738,7 @@ static void st_tty_close(struct tty_struct *tty)
 static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 			   char *tty_flags, int count)
 {
-
+#define VERBOSE
 #ifdef VERBOSE
 	print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
 		16, 1, data, count, 0);
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 73b6c8b..707c858 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -32,11 +32,7 @@
 #include <linux/sched.h>
 #include <linux/rfkill.h>
 
-/* understand BT events for fw response */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-
+#include <linux/skbuff.h>
 #include <linux/ti_wilink_st.h>
 
 
@@ -134,7 +130,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
 		/* Packet header has non-zero payload length and
 		 * we have enough space in created skb. Lets read
 		 * payload data */
-		kim_gdata->rx_state = ST_BT_W4_DATA;
+		kim_gdata->rx_state = ST_W4_DATA;
 		kim_gdata->rx_count = len;
 		return len;
 	}
@@ -158,8 +154,8 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 	const unsigned char *data, long count)
 {
 	const unsigned char *ptr;
-	struct hci_event_hdr *eh;
 	int len = 0, type = 0;
+	unsigned char *plen;
 
 	pr_debug("%s", __func__);
 	/* Decode received bytes here */
@@ -183,29 +179,27 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 			/* Check ST RX state machine , where are we? */
 			switch (kim_gdata->rx_state) {
 				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
+			case ST_W4_DATA:
 				pr_debug("Complete pkt received");
 				validate_firmware_response(kim_gdata);
 				kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 				kim_gdata->rx_skb = NULL;
 				continue;
 				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)kim_gdata->
-				    rx_skb->data;
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-				kim_check_data_len(kim_gdata, eh->plen);
+			case ST_W4_HEADER:
+				plen =
+				(unsigned char *)&kim_gdata->rx_skb->data[1];
+				pr_debug("event hdr: plen 0x%02x\n", *plen);
+				kim_check_data_len(kim_gdata, *plen);
 				continue;
 			}	/* end of switch */
 		}		/* end of if rx_state */
 		switch (*ptr) {
 			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
+		case 0x04:
+			kim_gdata->rx_state = ST_W4_HEADER;
+			kim_gdata->rx_count = 2;
+			type = *ptr;
 			break;
 		default:
 			pr_info("unknown packet");
@@ -216,16 +210,18 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 		ptr++;
 		count--;
 		kim_gdata->rx_skb =
-		    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			alloc_skb(1024+8, GFP_ATOMIC);
 		if (!kim_gdata->rx_skb) {
 			pr_err("can't allocate mem for new packet");
 			kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 			kim_gdata->rx_count = 0;
 			return;
 		}
-		bt_cb(kim_gdata->rx_skb)->pkt_type = type;
+		skb_reserve(kim_gdata->rx_skb, 8);
+		kim_gdata->rx_skb->cb[0] = 4;
+		kim_gdata->rx_skb->cb[1] = 0;
+
 	}
-	pr_info("done %s", __func__);
 	return;
 }
 
@@ -398,7 +394,7 @@ void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
 			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
 		break;
 
-	case ST_MAX:
+	case ST_MAX_CHANNELS:
 	default:
 		break;
 	}
@@ -416,7 +412,6 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
 	struct kim_data_s	*kim_gdata = st_gdata->kim_data;
 
-	pr_info(" %s ", __func__);
 	/* copy to local buffer */
 	if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
 		/* must be the read_ver_cmd */
@@ -578,7 +573,7 @@ static int kim_toggle_radio(void *data, bool blocked)
 		else
 			st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
 	break;
-	case ST_MAX:
+	case ST_MAX_CHANNELS:
 		pr_err(" wrong proto type ");
 	break;
 	}
@@ -664,12 +659,13 @@ static int kim_probe(struct platform_device *pdev)
 	/* refer to itself */
 	kim_gdata->core_data->kim_data = kim_gdata;
 
-	for (proto = 0; proto < ST_MAX; proto++) {
+	for (proto = 0; proto < ST_MAX_CHANNELS; proto++) {
 		kim_gdata->gpios[proto] = gpios[proto];
 		pr_info(" %ld gpio to be requested", gpios[proto]);
 	}
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+	for (proto = 0; (proto < ST_MAX_CHANNELS)
+			&& (gpios[proto] != -1); proto++) {
 		/* Claim the Bluetooth/FM/GPIO
 		 * nShutdown gpio from the system
 		 */
@@ -704,7 +700,8 @@ static int kim_probe(struct platform_device *pdev)
 	init_completion(&kim_gdata->kim_rcvd);
 	init_completion(&kim_gdata->ldisc_installed);
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+	for (proto = 0; (proto < ST_MAX_CHANNELS)
+			&& (gpios[proto] != -1); proto++) {
 		/* TODO: should all types be rfkill_type_bt ? */
 		kim_gdata->rf_protos[proto] = proto;
 		kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
@@ -752,7 +749,8 @@ static int kim_remove(struct platform_device *pdev)
 
 	kim_gdata = dev_get_drvdata(&pdev->dev);
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+	for (proto = 0; (proto < ST_MAX_CHANNELS)
+		&& (gpios[proto] != -1); proto++) {
 		/* Claim the Bluetooth/FM/GPIO
 		 * nShutdown gpio from the system
 		 */
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 4c7be22..1674ca7 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -42,7 +42,7 @@ enum proto_type {
 	ST_BT,
 	ST_FM,
 	ST_GPS,
-	ST_MAX,
+	ST_MAX_CHANNELS = 16,
 };
 
 /**
@@ -62,6 +62,17 @@ enum proto_type {
  * @priv_data: privdate data holder for the protocol drivers, sent
  *	from the protocol drivers during registration, and sent back on
  *	reg_complete_cb and recv.
+ * @chnl_id: channel id the protocol driver is interested in, the channel
+ *	id is nothing but the 1st byte of the packet in UART frame.
+ * @max_frame_size: size of the largest frame the protocol can receive.
+ * @hdr_len: length of the header structure of the protocol.
+ * @offset_len_in_hdr: this provides the offset of the length field in the
+ *	header structure of the protocol header, to assist ST to know
+ *	how much to receive, if the data is split across UART frames.
+ * @len_size: whether the length field inside the header is 2 bytes
+ *	or 1 byte.
+ * @reserve: the number of bytes ST needs to reserve in the skb being
+ *	prepared for the protocol driver.
  */
 struct st_proto_s {
 	enum proto_type type;
@@ -70,10 +81,17 @@ struct st_proto_s {
 	void (*reg_complete_cb) (void *, char data);
 	long (*write) (struct sk_buff *skb);
 	void *priv_data;
+
+	unsigned char chnl_id;
+	unsigned short max_frame_size;
+	unsigned char hdr_len;
+	unsigned char offset_len_in_hdr;
+	unsigned char len_size;
+	unsigned char reserve;
 };
 
 extern long st_register(struct st_proto_s *);
-extern long st_unregister(enum proto_type);
+extern long st_unregister(struct st_proto_s *);
 
 
 /*
@@ -114,6 +132,7 @@ extern long st_unregister(enum proto_type);
  * @rx_skb: the skb where all data for a protocol gets accumulated,
  *	since tty might not call receive when a complete event packet
  *	is received, the states, count and the skb needs to be maintained.
+ * @rx_chnl: the channel ID for which the data is getting accumalated for.
  * @txq: the list of skbs which needs to be sent onto the TTY.
  * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
  *	up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
@@ -135,10 +154,11 @@ struct st_data_s {
 #define ST_TX_SENDING	1
 #define ST_TX_WAKEUP	2
 	unsigned long tx_state;
-	struct st_proto_s *list[ST_MAX];
+	struct st_proto_s *list[ST_MAX_CHANNELS];
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
+	unsigned char rx_chnl;
 	struct sk_buff_head txq, tx_waitq;
 	spinlock_t lock;
 	unsigned char	protos_registered;
@@ -243,12 +263,12 @@ struct kim_data_s {
 	struct completion kim_rcvd, ldisc_installed;
 	char resp_buffer[30];
 	const struct firmware *fw_entry;
-	long gpios[ST_MAX];
+	long gpios[ST_MAX_CHANNELS];
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
-	struct rfkill *rfkill[ST_MAX];
-	enum proto_type rf_protos[ST_MAX];
+	struct rfkill *rfkill[ST_MAX_CHANNELS];
+	enum proto_type rf_protos[ST_MAX_CHANNELS];
 	struct st_data_s *core_data;
 	struct chip_version version;
 };
@@ -338,12 +358,8 @@ struct hci_command {
 
 /* ST LL receiver states */
 #define ST_W4_PACKET_TYPE       0
-#define ST_BT_W4_EVENT_HDR      1
-#define ST_BT_W4_ACL_HDR        2
-#define ST_BT_W4_SCO_HDR        3
-#define ST_BT_W4_DATA           4
-#define ST_FM_W4_EVENT_HDR      5
-#define ST_GPS_W4_EVENT_HDR	6
+#define ST_W4_HEADER		1
+#define ST_W4_DATA		2
 
 /* ST LL state machines */
 #define ST_LL_ASLEEP               0
-- 
1.6.3.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2011-02-04  8:23 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-02 11:00 [PATCH 0/7] TI ST patches for new requirements pavan_savoy
2011-02-02 11:00 ` [PATCH 1/7] drivers:misc: ti-st: register with channel IDs pavan_savoy
2011-02-02 11:00   ` [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs pavan_savoy
2011-02-02 11:00     ` [PATCH 3/7] drivers:misc: ti-st: fix error codes pavan_savoy
2011-02-02 11:00       ` [PATCH 4/7] drivers:misc: ti-st: set right debug levels for logs pavan_savoy
2011-02-02 11:00         ` [PATCH 5/7] drivers:misc: ti-st: firmware download optimization pavan_savoy
2011-02-02 11:00           ` [PATCH 6/7] drivers:misc: ti-st: fix hci-ll on wake_ind collision pavan_savoy
2011-02-02 11:00             ` [PATCH 7/7] drivers:misc: ti-st: remove multiple gpio handling pavan_savoy
2011-02-04  0:03     ` [PATCH 2/7] drivers:misc: ti-st: move from rfkill to sysfs Greg KH
2011-02-04  8:23 [PATCH 0/7] TI ST patches for new requirements pavan_savoy
2011-02-04  8:23 ` [PATCH 1/7] drivers:misc: ti-st: register with channel IDs pavan_savoy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).