LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de> To: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Rodolfo Giometti <giometti@linux.it>, Grazvydas Ignotas <notasas@gmail.com>, linux-kernel@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de> Subject: [PATCH 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support Date: Sun, 6 Feb 2011 01:47:57 +0100 [thread overview] Message-ID: <1296953291-10373-1-git-send-email-lars@metafoo.de> (raw) This patch series contains a few updates for the bq27x00 driver: * Support for additional power supply properties * Support for the bq27000 battery which is identical to the bq27200 but is connected through the HDQ bus. * Adds a register cache to the driver and introduces polling the batteries state * Minor improvements and cleanups The last patch in this series is not specific to the bq27x00 driver but is required for uevents to be generated properly for this driver. The patch makes properties which return -ENODATA to be ignored when generating uevents. Previously in such a case uevent generation would have been aborted with an error. But since the bq27x00 return -ENODATA for the TIME_TO_FULL property when the battery is not charging and for the TIME_TO_EMPTY property when the battery is not discharging and at least one of them is always true uevent generation would always fail. This series has so far been tested with the bq27000 and the bq27200 battery, but not with the bq27500 battery, so it would be nice if somebody with a board containing such a battery could test the patches to make sure that there are no regressions. Lars-Peter Clausen (10): POWER: bq27x00: Add type property POWER: bq27x00: Improve temperature precession POWER: bq27x00: Return -ENODEV for properties if the battery is not present POWER: bq27x00: Prepare code for addition of bq27000 platform driver POWER: bq27x00: Add bq27000 support POWER: bq27X00: Cache battery registers POWER: bq27x00: Poll battery state POWER: bq27x00: Give more specific reports on battery status POWER: bq27x00: Cleanup bq27x00_i2c_read POWER: Ignore -ENODATA errors when generating a uevent Pali Rohár (4): POWER: bq27x00: Fix current now property POWER: bq27x00: Add new properties POWER: bq27x00: Add MODULE_DEVICE_TABLE POWER: bq27x00: Minor cleanups drivers/power/Kconfig | 14 + drivers/power/bq27x00_battery.c | 725 +++++++++++++++++++++++++-------- drivers/power/power_supply_sysfs.c | 2 +- include/linux/power/bq27x00_battery.h | 19 + 4 files changed, 590 insertions(+), 170 deletions(-) create mode 100644 include/linux/power/bq27x00_battery.h -- 1.7.2.3
next reply other threads:[~2011-02-06 19:36 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-02-06 0:47 Lars-Peter Clausen [this message] 2011-02-06 0:47 ` [PATCH 01/14] POWER: bq27x00: Add type property Lars-Peter Clausen 2011-02-06 16:43 ` Rodolfo Giometti 2011-02-06 0:47 ` [PATCH 02/14] POWER: bq27x00: Improve temperature precession Lars-Peter Clausen 2011-02-07 8:06 ` Rodolfo Giometti 2011-02-06 0:48 ` [PATCH 03/14] POWER: bq27x00: Fix current now property Lars-Peter Clausen 2011-02-07 8:07 ` Rodolfo Giometti 2011-02-06 0:48 ` [PATCH 04/14] POWER: bq27x00: Return -ENODEV for properties if the battery is not present Lars-Peter Clausen 2011-02-06 16:40 ` Rodolfo Giometti 2011-02-06 0:48 ` [PATCH 05/14] POWER: bq27x00: Prepare code for addition of bq27000 platform driver Lars-Peter Clausen 2011-02-07 8:09 ` Rodolfo Giometti 2011-02-06 0:48 ` [PATCH 06/14] POWER: bq27x00: Add bq27000 support Lars-Peter Clausen 2011-02-06 0:48 ` [PATCH 07/14] POWER: bq27X00: Cache battery registers Lars-Peter Clausen 2011-02-06 0:48 ` [PATCH 08/14] POWER: bq27x00: Poll battery state Lars-Peter Clausen 2011-02-06 0:48 ` [PATCH 09/14] POWER: bq27x00: Add new properties Lars-Peter Clausen 2011-02-06 0:48 ` [PATCH 10/14] POWER: bq27x00: Add MODULE_DEVICE_TABLE Lars-Peter Clausen 2011-02-06 16:49 ` Rodolfo Giometti 2011-02-06 0:48 ` [PATCH 11/14] POWER: bq27x00: Give more specific reports on battery status Lars-Peter Clausen 2011-02-06 16:38 ` Rodolfo Giometti 2011-02-06 0:48 ` [PATCH 12/14] POWER: bq27x00: Minor cleanups Lars-Peter Clausen 2011-02-06 0:48 ` [PATCH 13/14] POWER: bq27x00: Cleanup bq27x00_i2c_read Lars-Peter Clausen 2011-02-06 0:48 ` [PATCH 14/14] POWER: Ignore -ENODATA errors when generating a uevent Lars-Peter Clausen 2011-02-06 22:47 ` [PATCH 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support Felipe Contreras 2011-02-06 23:09 ` Lars-Peter Clausen 2011-02-07 0:00 ` Felipe Contreras 2011-02-07 0:12 ` Lars-Peter Clausen 2011-02-07 10:52 ` Pali Rohár 2011-02-07 0:58 ` Grazvydas Ignotas 2011-02-07 1:30 ` Lars-Peter Clausen 2011-02-08 11:40 ` Grazvydas Ignotas 2011-02-08 16:13 ` Lars-Peter Clausen 2011-02-08 16:28 ` Anton Vorontsov 2011-02-08 17:09 ` Lars-Peter Clausen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1296953291-10373-1-git-send-email-lars@metafoo.de \ --to=lars@metafoo.de \ --cc=cbouatmailru@gmail.com \ --cc=giometti@linux.it \ --cc=linux-kernel@vger.kernel.org \ --cc=notasas@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).