LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Rodolfo Giometti <giometti@linux.it>,
	Grazvydas Ignotas <notasas@gmail.com>,
	linux-kernel@vger.kernel.org,
	Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support
Date: Sat, 12 Feb 2011 20:38:59 +0100	[thread overview]
Message-ID: <1297539554-13957-1-git-send-email-lars@metafoo.de> (raw)

This patch series contains a few updates for the bq27x00 driver:
* Support for additional power supply properties
* Support for the bq27000 battery which is identical to the bq27200 but is
  connected through the HDQ bus.
* Adds a register cache to the driver and introduces polling the batteries state
* Minor improvements and cleanups

The last patch in this series is not specific to the bq27x00 driver but is
required for uevents to be generated properly for this driver.
The patch makes properties which return -ENODATA to be ignored when generating
uevents. Previously in such a case uevent generation would have been aborted
with an error. But since the bq27x00 return -ENODATA for the TIME_TO_FULL
property when the battery is not charging and for the TIME_TO_EMPTY property
when the battery is not discharging and at least one of them is always true
uevent generation would always fail.

This series has so far been tested with the bq27000 and the bq27200 battery,
but not with the bq27500 battery, so it would be nice if somebody with a board
containing such a battery could test the patches to make sure that there are no
regressions.

Changes since v1:
Don't cache registers for fast changing properties like VOLTAGE_NOW,
CURRENT_NOW, ENERGY_NOW and CHARGE_NOW which can be obtained by reading
only a single register.
These were ignored anyway when comparing two battery states and since
their register is not shared between different properties we gain nothing
by caching them. On the other hand it allows the property to be queried at
a higher rate then the caching time.

This series is also available at
git://git.metafoo.de/linux-2.6 bq27x00-for-upstream

Lars-Peter Clausen (10):
  bq27x00: Add type property
  bq27x00: Improve temperature property precession
  bq27x00: Return -ENODEV for properties if the battery is not present
  bq27x00: Prepare code for addition of bq27000 platform driver
  bq27x00: Add bq27000 support
  bq27X00: Cache battery registers
  bq27x00: Poll battery state
  bq27x00: Give more specific reports on battery status
  bq27x00: Cleanup bq27x00_i2c_read
  Ignore -ENODATA errors when generating a uevent

Pali Rohár (4):
  bq27x00: Fix CURRENT_NOW property
  bq27x00: Add new properties
  bq27x00: Add MODULE_DEVICE_TABLE
  bq27x00: Minor cleanups

 drivers/power/Kconfig                 |   14 +
 drivers/power/bq27x00_battery.c       |  726 +++++++++++++++++++++++++--------
 drivers/power/power_supply_sysfs.c    |    2 +-
 include/linux/power/bq27x00_battery.h |   19 +
 4 files changed, 594 insertions(+), 167 deletions(-)
 create mode 100644 include/linux/power/bq27x00_battery.h

-- 
1.7.2.3


             reply	other threads:[~2011-02-12 19:39 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-12 19:38 Lars-Peter Clausen [this message]
2011-02-12 19:39 ` [PATCH 01/14] bq27x00: Add type property Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 02/14] bq27x00: Improve temperature property precession Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 03/14] bq27x00: Fix CURRENT_NOW property Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 04/14] bq27x00: Return -ENODEV for properties if the battery is not present Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 05/14] bq27x00: Prepare code for addition of bq27000 platform driver Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 06/14] bq27x00: Add bq27000 support Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 07/14] bq27x00: Cache battery registers Lars-Peter Clausen
2011-02-13 15:14   ` Grazvydas Ignotas
2011-02-13 18:56     ` Lars-Peter Clausen
2011-02-14  3:01   ` [PATCH 07/14 v3] " Lars-Peter Clausen
2011-02-14 21:58     ` Grazvydas Ignotas
2011-02-14 22:14       ` Lars-Peter Clausen
2011-02-15 11:48         ` Grazvydas Ignotas
2011-02-15 22:39           ` Grazvydas Ignotas
2011-02-21  8:28             ` Lars-Peter Clausen
2011-02-21 14:00               ` Grazvydas Ignotas
2011-02-21 14:49                 ` Lars-Peter Clausen
2011-02-21 21:23                   ` Grazvydas Ignotas
2011-02-12 19:39 ` [PATCH v2 07/14] bq27X00: " Lars-Peter Clausen
2011-02-12 19:52   ` Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 08/14] bq27x00: Poll battery state Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 09/14] bq27x00: Add new properties Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 10/14] bq27x00: Add MODULE_DEVICE_TABLE Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 11/14] bq27x00: Give more specific reports on battery status Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 12/14] bq27x00: Minor cleanups Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 13/14] bq27x00: Cleanup bq27x00_i2c_read Lars-Peter Clausen
2011-02-12 19:39 ` [PATCH 14/14] Ignore -ENODATA errors when generating a uevent Lars-Peter Clausen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1297539554-13957-1-git-send-email-lars@metafoo.de \
    --to=lars@metafoo.de \
    --cc=cbouatmailru@gmail.com \
    --cc=giometti@linux.it \
    --cc=linux-kernel@vger.kernel.org \
    --cc=notasas@gmail.com \
    --subject='Re: [PATCH v2 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).