LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Peter Huewe <peterhuewe@gmx.de>,
Ashley Lai <ashley@ashleylai.com>,
Marcel Selhorst <tpmdd@selhorst.net>
Cc: tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
josh.triplett@intel.com, christophe.ricard@gmail.com,
jason.gunthorpe@obsidianresearch.com, linux-api@vger.kernel.org,
trousers-tech@lists.sourceforge.net,
Will Arthur <will.c.arthur@intel.com>,
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Subject: [PATCH v8 8/8] tpm: TPM 2.0 FIFO Interface
Date: Wed, 3 Dec 2014 00:31:20 +0200 [thread overview]
Message-ID: <1417559480-13757-9-git-send-email-jarkko.sakkinen@linux.intel.com> (raw)
In-Reply-To: <1417559480-13757-1-git-send-email-jarkko.sakkinen@linux.intel.com>
From: Will Arthur <will.c.arthur@intel.com>
Detect TPM 2.0 by using the extended STS (STS3) register. For TPM 2.0,
instead of calling tpm_get_timeouts(), assign duration and timeout
values defined in the TPM 2.0 PTP specification.
Signed-off-by: Will Arthur <will.c.arthur@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
drivers/char/tpm/tpm_tis.c | 71 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 56 insertions(+), 15 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 7a2c59b..ecf8e68 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2005, 2006 IBM Corporation
+ * Copyright (C) 2014 Intel Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
@@ -44,6 +45,10 @@ enum tis_status {
TPM_STS_DATA_EXPECT = 0x08,
};
+enum tis_status3 {
+ TPM_STS3_TPM2_FAM = 0x04,
+};
+
enum tis_int_flags {
TPM_GLOBAL_INT_ENABLE = 0x80000000,
TPM_INTF_BURST_COUNT_STATIC = 0x100,
@@ -70,6 +75,7 @@ enum tis_defaults {
#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
#define TPM_STS(l) (0x0018 | ((l) << 12))
+#define TPM_STS3(l) (0x001b | ((l) << 12))
#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
@@ -344,6 +350,7 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
{
int rc;
u32 ordinal;
+ unsigned long dur;
rc = tpm_tis_send_data(chip, buf, len);
if (rc < 0)
@@ -355,9 +362,14 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
if (chip->vendor.irq) {
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ dur = tpm2_calc_ordinal_duration(chip, ordinal);
+ else
+ dur = tpm_calc_ordinal_duration(chip, ordinal);
+
if (wait_for_tpm_stat
- (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- tpm_calc_ordinal_duration(chip, ordinal),
+ (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
&chip->vendor.read_queue, false) < 0) {
rc = -ETIME;
goto out_err;
@@ -543,6 +555,7 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
u32 vendor, intfcaps, intmask;
int rc, i, irq_s, irq_e, probe;
struct tpm_chip *chip;
+ u8 sts3;
chip = tpmm_chip_alloc(dev, &tpm_tis);
if (IS_ERR(chip))
@@ -554,11 +567,28 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
if (!chip->vendor.iobase)
return -EIO;
+ sts3 = ioread8(chip->vendor.iobase + TPM_STS3(1));
+ if ((sts3 & TPM_STS3_TPM2_FAM) == TPM_STS3_TPM2_FAM)
+ chip->flags = TPM_CHIP_FLAG_TPM2;
+
/* Default timeouts */
- chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
- chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+ chip->vendor.timeout_a = usecs_to_jiffies(TPM2_TIMEOUT_A);
+ chip->vendor.timeout_b = usecs_to_jiffies(TPM2_TIMEOUT_B);
+ chip->vendor.timeout_c = usecs_to_jiffies(TPM2_TIMEOUT_C);
+ chip->vendor.timeout_d = usecs_to_jiffies(TPM2_TIMEOUT_D);
+ chip->vendor.duration[TPM_SHORT] =
+ usecs_to_jiffies(TPM2_DURATION_SHORT);
+ chip->vendor.duration[TPM_MEDIUM] =
+ usecs_to_jiffies(TPM2_DURATION_MEDIUM);
+ chip->vendor.duration[TPM_LONG] =
+ usecs_to_jiffies(TPM2_DURATION_LONG);
+ } else {
+ chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+ chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ }
if (wait_startup(chip, 0) != 0) {
rc = -ENODEV;
@@ -573,8 +603,8 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
chip->vendor.manufacturer_id = vendor;
- dev_info(dev,
- "1.2 TPM (device-id 0x%X, rev-id %d)\n",
+ dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
+ (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
if (!itpm) {
@@ -616,13 +646,17 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
dev_dbg(dev, "\tData Avail Int Support\n");
/* get the timeouts before testing for irqs */
- if (tpm_get_timeouts(chip)) {
+ if (!(chip->flags & TPM_CHIP_FLAG_TPM2) && tpm_get_timeouts(chip)) {
dev_err(dev, "Could not get TPM timeouts and durations\n");
rc = -ENODEV;
goto out_err;
}
- if (tpm_do_selftest(chip)) {
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ rc = tpm2_do_selftest(chip);
+ else
+ rc = tpm_do_selftest(chip);
+ if (rc) {
dev_err(dev, "TPM self test failed\n");
rc = -ENODEV;
goto out_err;
@@ -683,7 +717,10 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
chip->vendor.probed_irq = 0;
/* Generate Interrupts */
- tpm_gen_interrupt(chip);
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ tpm2_gen_interrupt(chip);
+ else
+ tpm_gen_interrupt(chip);
chip->vendor.irq = chip->vendor.probed_irq;
@@ -759,14 +796,18 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
static int tpm_tis_resume(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
- int ret;
+ int ret = 0;
if (chip->vendor.irq)
tpm_tis_reenable_interrupts(chip);
- ret = tpm_pm_resume(dev);
- if (!ret)
- tpm_do_selftest(chip);
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ tpm2_do_selftest(chip);
+ else {
+ ret = tpm_pm_resume(dev);
+ if (!ret)
+ tpm_do_selftest(chip);
+ }
return ret;
}
--
2.1.0
next prev parent reply other threads:[~2014-12-02 22:32 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-02 22:31 [PATCH v8 0/8] TPM 2.0 support Jarkko Sakkinen
2014-12-02 22:31 ` [PATCH v8 1/8] tpm: merge duplicate transmit_cmd() functions Jarkko Sakkinen
2014-12-02 22:31 ` [PATCH v8 2/8] tpm: two-phase chip management functions Jarkko Sakkinen
2014-12-02 22:31 ` [PATCH v8 3/8] tpm: fix raciness of PPI interface lookup Jarkko Sakkinen
2014-12-02 22:31 ` [PATCH v8 4/8] tpm: rename chip->dev to chip->pdev Jarkko Sakkinen
2014-12-02 22:31 ` [PATCH v8 5/8] tpm: device class for tpm Jarkko Sakkinen
2014-12-02 22:31 ` [PATCH v8 6/8] tpm: TPM 2.0 baseline support Jarkko Sakkinen
2014-12-03 2:21 ` [tpmdd-devel] " Stefan Berger
2014-12-03 2:28 ` Stefan Berger
2014-12-04 23:13 ` Peter Hüwe
2014-12-08 13:56 ` Jarkko Sakkinen
2014-12-08 16:18 ` peterhuewe
2014-12-02 22:31 ` [PATCH v8 7/8] tpm: TPM 2.0 CRB Interface Jarkko Sakkinen
2014-12-02 23:07 ` [tpmdd-devel] " Stefan Berger
2014-12-02 23:10 ` Peter Hüwe
2014-12-02 22:31 ` Jarkko Sakkinen [this message]
2014-12-02 22:55 ` [PATCH v8 0/8] TPM 2.0 support Peter Hüwe
2014-12-03 10:10 ` Jarkko Sakkinen
2014-12-02 23:16 ` Peter Hüwe
2014-12-02 23:21 ` [tpmdd-devel] " Peter Hüwe
2014-12-02 23:24 ` Aaro Koskinen
2014-12-02 23:33 ` Peter Hüwe
2014-12-02 23:48 ` Joe Perches
2014-12-03 0:03 ` Thomas Gleixner
2014-12-04 5:52 ` Jarkko Sakkinen
2014-12-04 5:49 [PATCH v9 " Jarkko Sakkinen
2014-12-04 5:49 ` [PATCH v8 8/8] tpm: TPM 2.0 FIFO Interface Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417559480-13757-9-git-send-email-jarkko.sakkinen@linux.intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=ashley@ashleylai.com \
--cc=christophe.ricard@gmail.com \
--cc=jason.gunthorpe@obsidianresearch.com \
--cc=josh.triplett@intel.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=tpmdd@selhorst.net \
--cc=trousers-tech@lists.sourceforge.net \
--cc=will.c.arthur@intel.com \
--subject='Re: [PATCH v8 8/8] tpm: TPM 2.0 FIFO Interface' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).