LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Graham Moore <grmoore@opensource.altera.com>
To: <linux-mtd@lists.infradead.org>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	<linux-kernel@vger.kernel.org>,
	Alan Tull <atull@opensource.altera.com>,
	Dinh Nguyen <dinguyen@opensource.altera.com>,
	Yves Vandervennet <yvanderv@opensource.altera.com>,
	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
	Graham Moore <grmoore@opensource.altera.com>
Subject: [PATCH 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Fri, 5 Dec 2014 13:35:32 -0600	[thread overview]
Message-ID: <1417808133-20719-2-git-send-email-grmoore@opensource.altera.com> (raw)
In-Reply-To: <1417808133-20719-1-git-send-email-grmoore@opensource.altera.com>

Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
---
 .../devicetree/bindings/mtd/cadence_quadspi.txt    |   50 ++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt

diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
new file mode 100644
index 0000000..3a8ea1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
@@ -0,0 +1,50 @@
+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+	physical address and length.  The first entry is the address and
+	length of the controller register set.  The second entry is the
+	address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- ext-decoder : Value of 0 means no external chipselect decoder is
+	connected, 1 means there is an external chipselect decoder connected.
+- fifo-depth : Size of the data FIFO in words.
+- bus-num : Number of the SPI bus to which the controller is connected.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,page-size : Size, in bytes, of the device's write page
+- cdns,block-size : Size of the device's erase block
+- cdns,read-delay : Selay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in master reference clocks for the length that the master mode chip select outputs are de-asserted between transactions.
+- cdns,tsd2d-ns : Delay in master reference clocks between one chip select being de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in master reference clocks between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in master reference clocks between setting qspi_n_ss_out low and first bit transfer.
+
+Example:
+
+	qspi: spi@ff705000 {
+		compatible = "cdns,qspi-nor";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xff705000 0x1000>,
+			<0xffa00000 0x1000>;
+		interrupts = <0 151 4>;
+		clocks = <&qspi_clk>;
+		ext-decoder = <0>;
+		fifo-depth = <128>;
+
+		flash0: n25q00@0 {
+			...
+			cdns,page-size = <256>;
+			cdns,block-size = <16>;
+			cdns,read-delay = <4>;
+			cdns,tshsl-ns = <50>;
+			cdns,tsd2d-ns = <50>;
+			cdns,tchsh-ns = <4>;
+			cdns,tslch-ns = <4>;
+		}
+	}
-- 
1.7.9.5


  reply	other threads:[~2014-12-05 19:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-05 19:35 [PATCH 0/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Graham Moore
2014-12-05 19:35 ` Graham Moore [this message]
2014-12-05 19:35 ` [PATCH 2/2] " Graham Moore
2014-12-05 22:30   ` Rafał Miłecki
2014-12-08 16:54     ` Graham Moore

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417808133-20719-2-git-send-email-grmoore@opensource.altera.com \
    --to=grmoore@opensource.altera.com \
    --cc=atull@opensource.altera.com \
    --cc=computersforpeace@gmail.com \
    --cc=dinguyen@opensource.altera.com \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=yvanderv@opensource.altera.com \
    --subject='Re: [PATCH 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).