[PATCH 0/9] virtio_pci: split out legacy device support

[PATCH 0/9] virtio_pci: split out legacy device support

[Michael S. Tsirkin]

virtio 1.0 support for virtio-pci isn't ready yet.
Therefore, this patchset doesn't make any functional changes.
Instead, this simply refactors virtio-pci, splitting legacy
device support code out to a separate file: virtio_pci_legacy.c

For virtio 1.0, all that's left is to add virtio_pci_modern.c
supporting
	get_features
	finalize_features
	get (config)
	set (config)
	get_status
	set_status
	reset
	setup_vq
	del_vq
	probe
	remove

Most notably, tricky MSI-X vector probing logic stays
in common file: virtio_pci.c. version-specific only has
to code setup/del functions for individual vqs.

Note: this is on top of "virtio 1.0 enhancements"
that I sent earlier.

Michael S. Tsirkin (9):
  virtio_pci: add isr field
  virtio_pci: fix coding style for structs
  virtio_pci: free up vq->priv
  virtio_pci: use priv for vq notification
  virtio_pci: delete vqs indirectly
  virtio_pci: setup vqs indirectly
  virtio_pci: setup config vector indirectly
  virtio_pci: split out legacy device support
  virtio_pci: update file descriptions and copyright

 drivers/virtio/virtio_pci.h        | 136 ++++++++++++
 drivers/virtio/virtio_pci.c        | 430 ++++---------------------------------
 drivers/virtio/virtio_pci_legacy.c | 326 ++++++++++++++++++++++++++++
 drivers/virtio/Makefile            |   2 +-
 4 files changed, 507 insertions(+), 387 deletions(-)
 create mode 100644 drivers/virtio/virtio_pci.h
 create mode 100644 drivers/virtio/virtio_pci_legacy.c

-- 
MST

[PATCH 1/9] virtio_pci: add isr field

[Michael S. Tsirkin]

Use isr field instead of direct access to ioaddr.
This way generalizes easily to virtio 1.0.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 9be59d9..ee1b54c 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -40,6 +40,9 @@ struct virtio_pci_device
 	/* the IO mapping for the PCI config space */
 	void __iomem *ioaddr;
 
+	/* the IO mapping for ISR operation */
+	void __iomem *isr;
+
 	/* a list of queues so we can dispatch IRQs */
 	spinlock_t lock;
 	struct list_head virtqueues;
@@ -248,7 +251,7 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
 
 	/* reading the ISR has the effect of also clearing it so it's very
 	 * important to save off the value. */
-	isr = ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
+	isr = ioread8(vp_dev->isr);
 
 	/* It's definitely not us if the ISR was not high */
 	if (!isr)
@@ -719,6 +722,8 @@ static int virtio_pci_probe(struct pci_dev *pci_dev,
 		goto out_req_regions;
 	}
 
+	vp_dev->isr = vp_dev->ioaddr + VIRTIO_PCI_ISR;
+
 	pci_set_drvdata(pci_dev, vp_dev);
 	pci_set_master(pci_dev);
 
-- 
MST

[PATCH 2/9] virtio_pci: fix coding style for structs

[Michael S. Tsirkin]

should be

struct foo {
}

not

struct foo
{
}

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index ee1b54c..6f3db1f 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -32,8 +32,7 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION("1");
 
 /* Our device structure */
-struct virtio_pci_device
-{
+struct virtio_pci_device {
 	struct virtio_device vdev;
 	struct pci_dev *pci_dev;
 
@@ -72,8 +71,7 @@ enum {
 	VP_MSIX_VQ_VECTOR = 1,
 };
 
-struct virtio_pci_vq_info
-{
+struct virtio_pci_vq_info {
 	/* the actual virtqueue */
 	struct virtqueue *vq;
 
-- 
MST

[PATCH 3/9] virtio_pci: free up vq->priv

[Michael S. Tsirkin]

We don't need to go from vq to vq info on
data path, so using direct vq->priv pointer for that
seems like a waste.

Let's build an array of vq infos, then we can use vq->index
for that lookup.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.c | 56 +++++++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 25 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 6f3db1f..6a7b8bf 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -31,6 +31,23 @@ MODULE_DESCRIPTION("virtio-pci");
 MODULE_LICENSE("GPL");
 MODULE_VERSION("1");
 
+struct virtio_pci_vq_info {
+	/* the actual virtqueue */
+	struct virtqueue *vq;
+
+	/* the number of entries in the queue */
+	int num;
+
+	/* the virtual address of the ring queue */
+	void *queue;
+
+	/* the list node for the virtqueues list */
+	struct list_head node;
+
+	/* MSI-X vector (or none) */
+	unsigned msix_vector;
+};
+
 /* Our device structure */
 struct virtio_pci_device {
 	struct virtio_device vdev;
@@ -46,6 +63,9 @@ struct virtio_pci_device {
 	spinlock_t lock;
 	struct list_head virtqueues;
 
+	/* array of all queues for house-keeping */
+	struct virtio_pci_vq_info **vqs;
+
 	/* MSI-X support */
 	int msix_enabled;
 	int intx_enabled;
@@ -71,23 +91,6 @@ enum {
 	VP_MSIX_VQ_VECTOR = 1,
 };
 
-struct virtio_pci_vq_info {
-	/* the actual virtqueue */
-	struct virtqueue *vq;
-
-	/* the number of entries in the queue */
-	int num;
-
-	/* the virtual address of the ring queue */
-	void *queue;
-
-	/* the list node for the virtqueues list */
-	struct list_head node;
-
-	/* MSI-X vector (or none) */
-	unsigned msix_vector;
-};
-
 /* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
 static const struct pci_device_id virtio_pci_id_table[] = {
 	{ PCI_DEVICE(0x1af4, PCI_ANY_ID) },
@@ -434,7 +437,6 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
 		goto out_activate_queue;
 	}
 
-	vq->priv = info;
 	info->vq = vq;
 
 	if (msix_vec != VIRTIO_MSI_NO_VECTOR) {
@@ -454,6 +456,7 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
 		INIT_LIST_HEAD(&info->node);
 	}
 
+	vp_dev->vqs[index] = info;
 	return vq;
 
 out_assign:
@@ -469,7 +472,7 @@ out_info:
 static void vp_del_vq(struct virtqueue *vq)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
-	struct virtio_pci_vq_info *info = vq->priv;
+	struct virtio_pci_vq_info *info = vp_dev->vqs[vq->index];
 	unsigned long flags, size;
 
 	spin_lock_irqsave(&vp_dev->lock, flags);
@@ -503,7 +506,7 @@ static void vp_del_vqs(struct virtio_device *vdev)
 	struct virtio_pci_vq_info *info;
 
 	list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
-		info = vq->priv;
+		info = vp_dev->vqs[vq->index];
 		if (vp_dev->per_vq_vectors &&
 			info->msix_vector != VIRTIO_MSI_NO_VECTOR)
 			free_irq(vp_dev->msix_entries[info->msix_vector].vector,
@@ -513,6 +516,7 @@ static void vp_del_vqs(struct virtio_device *vdev)
 	vp_dev->per_vq_vectors = false;
 
 	vp_free_vectors(vdev);
+	kfree(vp_dev->vqs);
 }
 
 static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
@@ -526,11 +530,15 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 	u16 msix_vec;
 	int i, err, nvectors, allocated_vectors;
 
+	vp_dev->vqs = kmalloc(nvqs * sizeof *vp_dev->vqs, GFP_KERNEL);
+	if (!vp_dev->vqs)
+		return -ENOMEM;
+
 	if (!use_msix) {
 		/* Old style: one normal interrupt for change and all vqs. */
 		err = vp_request_intx(vdev);
 		if (err)
-			goto error_request;
+			goto error_find;
 	} else {
 		if (per_vq_vectors) {
 			/* Best option: one for change interrupt, one per vq. */
@@ -545,7 +553,7 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 
 		err = vp_request_msix_vectors(vdev, nvectors, per_vq_vectors);
 		if (err)
-			goto error_request;
+			goto error_find;
 	}
 
 	vp_dev->per_vq_vectors = per_vq_vectors;
@@ -587,8 +595,6 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 
 error_find:
 	vp_del_vqs(vdev);
-
-error_request:
 	return err;
 }
 
@@ -630,7 +636,7 @@ static int vp_set_vq_affinity(struct virtqueue *vq, int cpu)
 {
 	struct virtio_device *vdev = vq->vdev;
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	struct virtio_pci_vq_info *info = vq->priv;
+	struct virtio_pci_vq_info *info = vp_dev->vqs[vq->index];
 	struct cpumask *mask;
 	unsigned int irq;
 
-- 
MST

[PATCH 4/9] virtio_pci: use priv for vq notification

[Michael S. Tsirkin]

slightly reduce the amount of pointer chasing this needs to do.
More importantly, this will easily generalize to virtio 1.0.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 6a7b8bf..7b82eb5 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -204,11 +204,9 @@ static void vp_reset(struct virtio_device *vdev)
 /* the notify function used when creating a virt queue */
 static bool vp_notify(struct virtqueue *vq)
 {
-	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
-
 	/* we write the queue's selector into the notification register to
 	 * signal the other end */
-	iowrite16(vq->index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY);
+	iowrite16(vq->index, (void __iomem *)vq->priv);
 	return true;
 }
 
@@ -437,6 +435,7 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
 		goto out_activate_queue;
 	}
 
+	vq->priv = (void __force *)vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY;
 	info->vq = vq;
 
 	if (msix_vec != VIRTIO_MSI_NO_VECTOR) {
-- 
MST

[PATCH 5/9] virtio_pci: delete vqs indirectly

[Michael S. Tsirkin]

VQ deletion is mostly version-specific, add another level of indirection
to split the version-independent code out.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 7b82eb5..133978c 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -81,6 +81,8 @@ struct virtio_pci_device {
 
 	/* Whether we have vector per vq */
 	bool per_vq_vectors;
+
+	void (*del_vq)(struct virtio_pci_vq_info *info);
 };
 
 /* Constants for MSI-X */
@@ -468,15 +470,11 @@ out_info:
 	return ERR_PTR(err);
 }
 
-static void vp_del_vq(struct virtqueue *vq)
+static void del_vq(struct virtio_pci_vq_info *info)
 {
+	struct virtqueue *vq = info->vq;
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
-	struct virtio_pci_vq_info *info = vp_dev->vqs[vq->index];
-	unsigned long flags, size;
-
-	spin_lock_irqsave(&vp_dev->lock, flags);
-	list_del(&info->node);
-	spin_unlock_irqrestore(&vp_dev->lock, flags);
+	unsigned long size;
 
 	iowrite16(vq->index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
 
@@ -494,6 +492,19 @@ static void vp_del_vq(struct virtqueue *vq)
 
 	size = PAGE_ALIGN(vring_size(info->num, VIRTIO_PCI_VRING_ALIGN));
 	free_pages_exact(info->queue, size);
+}
+
+static void vp_del_vq(struct virtqueue *vq)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
+	struct virtio_pci_vq_info *info = vp_dev->vqs[vq->index];
+	unsigned long flags;
+
+	spin_lock_irqsave(&vp_dev->lock, flags);
+	list_del(&info->node);
+	spin_unlock_irqrestore(&vp_dev->lock, flags);
+
+	vp_dev->del_vq(info);
 	kfree(info);
 }
 
@@ -737,6 +748,8 @@ static int virtio_pci_probe(struct pci_dev *pci_dev,
 	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
 	vp_dev->vdev.id.device = pci_dev->subsystem_device;
 
+	vp_dev->del_vq = del_vq;
+
 	/* finally register the virtio device */
 	err = register_virtio_device(&vp_dev->vdev);
 	if (err)
-- 
MST

[PATCH 6/9] virtio_pci: setup vqs indirectly

[Michael S. Tsirkin]

VQ setup is mostly version-specific, add another level of indirection to
split the version-independent code out.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.c | 69 ++++++++++++++++++++++++++++++---------------
 1 file changed, 46 insertions(+), 23 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 133978c..68023e5 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -82,6 +82,12 @@ struct virtio_pci_device {
 	/* Whether we have vector per vq */
 	bool per_vq_vectors;
 
+	struct virtqueue *(*setup_vq)(struct virtio_pci_device *vp_dev,
+				      struct virtio_pci_vq_info *info,
+				      unsigned idx,
+				      void (*callback)(struct virtqueue *vq),
+				      const char *name,
+				      u16 msix_vec);
 	void (*del_vq)(struct virtio_pci_vq_info *info);
 };
 
@@ -389,15 +395,15 @@ static int vp_request_intx(struct virtio_device *vdev)
 	return err;
 }
 
-static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
+static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
+				  struct virtio_pci_vq_info *info,
+				  unsigned index,
 				  void (*callback)(struct virtqueue *vq),
 				  const char *name,
 				  u16 msix_vec)
 {
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	struct virtio_pci_vq_info *info;
 	struct virtqueue *vq;
-	unsigned long flags, size;
+	unsigned long size;
 	u16 num;
 	int err;
 
@@ -409,28 +415,21 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
 	if (!num || ioread32(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN))
 		return ERR_PTR(-ENOENT);
 
-	/* allocate and fill out our structure the represents an active
-	 * queue */
-	info = kmalloc(sizeof(struct virtio_pci_vq_info), GFP_KERNEL);
-	if (!info)
-		return ERR_PTR(-ENOMEM);
-
 	info->num = num;
 	info->msix_vector = msix_vec;
 
 	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
 	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
-	if (info->queue == NULL) {
-		err = -ENOMEM;
-		goto out_info;
-	}
+	if (info->queue == NULL)
+		return ERR_PTR(-ENOMEM);
 
 	/* activate the queue */
 	iowrite32(virt_to_phys(info->queue) >> VIRTIO_PCI_QUEUE_ADDR_SHIFT,
 		  vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
 
 	/* create the vring */
-	vq = vring_new_virtqueue(index, info->num, VIRTIO_PCI_VRING_ALIGN, vdev,
+	vq = vring_new_virtqueue(index, info->num,
+				 VIRTIO_PCI_VRING_ALIGN, &vp_dev->vdev,
 				 true, info->queue, vp_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
@@ -438,7 +437,6 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
 	}
 
 	vq->priv = (void __force *)vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY;
-	info->vq = vq;
 
 	if (msix_vec != VIRTIO_MSI_NO_VECTOR) {
 		iowrite16(msix_vec, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
@@ -449,6 +447,35 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
 		}
 	}
 
+	return vq;
+
+out_assign:
+	vring_del_virtqueue(vq);
+out_activate_queue:
+	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
+	free_pages_exact(info->queue, size);
+	return ERR_PTR(err);
+}
+
+static struct virtqueue *vp_setup_vq(struct virtio_device *vdev, unsigned index,
+				     void (*callback)(struct virtqueue *vq),
+				     const char *name,
+				     u16 msix_vec)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	struct virtio_pci_vq_info *info = kmalloc(sizeof *info, GFP_KERNEL);
+	struct virtqueue *vq;
+	unsigned long flags;
+
+	/* fill out our structure that represents an active queue */
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+
+	vq = vp_dev->setup_vq(vp_dev, info, index, callback, name, msix_vec);
+	if (IS_ERR(vq))
+		goto out_info;
+
+	info->vq = vq;
 	if (callback) {
 		spin_lock_irqsave(&vp_dev->lock, flags);
 		list_add(&info->node, &vp_dev->virtqueues);
@@ -460,14 +487,9 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
 	vp_dev->vqs[index] = info;
 	return vq;
 
-out_assign:
-	vring_del_virtqueue(vq);
-out_activate_queue:
-	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
-	free_pages_exact(info->queue, size);
 out_info:
 	kfree(info);
-	return ERR_PTR(err);
+	return vq;
 }
 
 static void del_vq(struct virtio_pci_vq_info *info)
@@ -578,7 +600,7 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 			msix_vec = allocated_vectors++;
 		else
 			msix_vec = VP_MSIX_VQ_VECTOR;
-		vqs[i] = setup_vq(vdev, i, callbacks[i], names[i], msix_vec);
+		vqs[i] = vp_setup_vq(vdev, i, callbacks[i], names[i], msix_vec);
 		if (IS_ERR(vqs[i])) {
 			err = PTR_ERR(vqs[i]);
 			goto error_find;
@@ -748,6 +770,7 @@ static int virtio_pci_probe(struct pci_dev *pci_dev,
 	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
 	vp_dev->vdev.id.device = pci_dev->subsystem_device;
 
+	vp_dev->setup_vq = setup_vq;
 	vp_dev->del_vq = del_vq;
 
 	/* finally register the virtio device */
-- 
MST

[PATCH 7/9] virtio_pci: setup config vector indirectly

[Michael S. Tsirkin]

config vector setup is version specific, do it indirectly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 68023e5..c8ca3f7 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -89,6 +89,7 @@ struct virtio_pci_device {
 				      const char *name,
 				      u16 msix_vec);
 	void (*del_vq)(struct virtio_pci_vq_info *info);
+	u16 (*config_vector)(struct virtio_pci_device *vp_dev, u16 vector);
 };
 
 /* Constants for MSI-X */
@@ -271,6 +272,15 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
 	return vp_vring_interrupt(irq, opaque);
 }
 
+u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
+{
+	/* Setup the vector used for configuration events */
+	iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+	/* Verify we had enough resources to assign the vector */
+	/* Will also flush the write out to device */
+	return ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+}
+
 static void vp_free_vectors(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
@@ -290,10 +300,7 @@ static void vp_free_vectors(struct virtio_device *vdev)
 
 	if (vp_dev->msix_enabled) {
 		/* Disable the vector used for configuration */
-		iowrite16(VIRTIO_MSI_NO_VECTOR,
-			  vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-		/* Flush the write out to device */
-		ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		vp_dev->config_vector(vp_dev, VIRTIO_MSI_NO_VECTOR);
 
 		pci_disable_msix(vp_dev->pci_dev);
 		vp_dev->msix_enabled = 0;
@@ -357,9 +364,8 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
 		goto error;
 	++vp_dev->msix_used_vectors;
 
-	iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+	v = vp_dev->config_vector(vp_dev, v);
 	/* Verify we had enough resources to assign the vector */
-	v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
 	if (v == VIRTIO_MSI_NO_VECTOR) {
 		err = -EBUSY;
 		goto error;
@@ -770,6 +776,7 @@ static int virtio_pci_probe(struct pci_dev *pci_dev,
 	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
 	vp_dev->vdev.id.device = pci_dev->subsystem_device;
 
+	vp_dev->config_vector = vp_config_vector;
 	vp_dev->setup_vq = setup_vq;
 	vp_dev->del_vq = del_vq;
 
-- 
MST

[PATCH 8/9] virtio_pci: split out legacy device support

[Michael S. Tsirkin]

Move everything dealing with legacy devices out to virtio_pci_legacy.c.
Expose common code APIs in virtio_pci.h

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.h        | 133 ++++++++++++
 drivers/virtio/virtio_pci.c        | 420 ++-----------------------------------
 drivers/virtio/virtio_pci_legacy.c | 323 ++++++++++++++++++++++++++++
 drivers/virtio/Makefile            |   2 +-
 4 files changed, 469 insertions(+), 409 deletions(-)
 create mode 100644 drivers/virtio/virtio_pci.h
 create mode 100644 drivers/virtio/virtio_pci_legacy.c

diff --git a/drivers/virtio/virtio_pci.h b/drivers/virtio/virtio_pci.h
new file mode 100644
index 0000000..a3b1259
--- /dev/null
+++ b/drivers/virtio/virtio_pci.h
@@ -0,0 +1,133 @@
+#ifndef _DRIVERS_VIRTIO_VIRTIO_PCI_H
+#define _DRIVERS_VIRTIO_VIRTIO_PCI_H
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+#define VIRTIO_PCI_NO_LEGACY
+#include <linux/virtio_pci.h>
+#include <linux/highmem.h>
+#include <linux/spinlock.h>
+
+struct virtio_pci_vq_info {
+	/* the actual virtqueue */
+	struct virtqueue *vq;
+
+	/* the number of entries in the queue */
+	int num;
+
+	/* the virtual address of the ring queue */
+	void *queue;
+
+	/* the list node for the virtqueues list */
+	struct list_head node;
+
+	/* MSI-X vector (or none) */
+	unsigned msix_vector;
+};
+
+/* Our device structure */
+struct virtio_pci_device {
+	struct virtio_device vdev;
+	struct pci_dev *pci_dev;
+
+	/* the IO mapping for the PCI config space */
+	void __iomem *ioaddr;
+
+	/* the IO mapping for ISR operation */
+	void __iomem *isr;
+
+	/* a list of queues so we can dispatch IRQs */
+	spinlock_t lock;
+	struct list_head virtqueues;
+
+	/* array of all queues for house-keeping */
+	struct virtio_pci_vq_info **vqs;
+
+	/* MSI-X support */
+	int msix_enabled;
+	int intx_enabled;
+	struct msix_entry *msix_entries;
+	cpumask_var_t *msix_affinity_masks;
+	/* Name strings for interrupts. This size should be enough,
+	 * and I'm too lazy to allocate each name separately. */
+	char (*msix_names)[256];
+	/* Number of available vectors */
+	unsigned msix_vectors;
+	/* Vectors allocated, excluding per-vq vectors if any */
+	unsigned msix_used_vectors;
+
+	/* Whether we have vector per vq */
+	bool per_vq_vectors;
+
+	struct virtqueue *(*setup_vq)(struct virtio_pci_device *vp_dev,
+				      struct virtio_pci_vq_info *info,
+				      unsigned idx,
+				      void (*callback)(struct virtqueue *vq),
+				      const char *name,
+				      u16 msix_vec);
+	void (*del_vq)(struct virtio_pci_vq_info *info);
+
+	u16 (*config_vector)(struct virtio_pci_device *vp_dev, u16 vector);
+};
+
+/* Constants for MSI-X */
+/* Use first vector for configuration changes, second and the rest for
+ * virtqueues Thus, we need at least 2 vectors for MSI. */
+enum {
+	VP_MSIX_CONFIG_VECTOR = 0,
+	VP_MSIX_VQ_VECTOR = 1,
+};
+
+/* Convert a generic virtio device to our structure */
+static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
+{
+	return container_of(vdev, struct virtio_pci_device, vdev);
+}
+
+/* wait for pending irq handlers */
+void vp_synchronize_vectors(struct virtio_device *vdev);
+/* the notify function used when creating a virt queue */
+bool vp_notify(struct virtqueue *vq);
+/* the config->del_vqs() implementation */
+void vp_del_vqs(struct virtio_device *vdev);
+/* the config->find_vqs() implementation */
+int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[]);
+const char *vp_bus_name(struct virtio_device *vdev);
+
+/* Setup the affinity for a virtqueue:
+ * - force the affinity for per vq vector
+ * - OR over all affinities for shared MSI
+ * - ignore the affinity request if we're using INTX
+ */
+int vp_set_vq_affinity(struct virtqueue *vq, int cpu);
+void virtio_pci_release_dev(struct device *);
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops virtio_pci_pm_ops;
+#endif
+
+#endif
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index c8ca3f7..6c7e186 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -14,179 +14,10 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/virtio.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_ring.h>
-#include <linux/virtio_pci.h>
-#include <linux/highmem.h>
-#include <linux/spinlock.h>
-
-MODULE_AUTHOR("Anthony Liguori <aliguori@us.ibm.com>");
-MODULE_DESCRIPTION("virtio-pci");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("1");
-
-struct virtio_pci_vq_info {
-	/* the actual virtqueue */
-	struct virtqueue *vq;
-
-	/* the number of entries in the queue */
-	int num;
-
-	/* the virtual address of the ring queue */
-	void *queue;
-
-	/* the list node for the virtqueues list */
-	struct list_head node;
-
-	/* MSI-X vector (or none) */
-	unsigned msix_vector;
-};
-
-/* Our device structure */
-struct virtio_pci_device {
-	struct virtio_device vdev;
-	struct pci_dev *pci_dev;
-
-	/* the IO mapping for the PCI config space */
-	void __iomem *ioaddr;
-
-	/* the IO mapping for ISR operation */
-	void __iomem *isr;
-
-	/* a list of queues so we can dispatch IRQs */
-	spinlock_t lock;
-	struct list_head virtqueues;
-
-	/* array of all queues for house-keeping */
-	struct virtio_pci_vq_info **vqs;
-
-	/* MSI-X support */
-	int msix_enabled;
-	int intx_enabled;
-	struct msix_entry *msix_entries;
-	cpumask_var_t *msix_affinity_masks;
-	/* Name strings for interrupts. This size should be enough,
-	 * and I'm too lazy to allocate each name separately. */
-	char (*msix_names)[256];
-	/* Number of available vectors */
-	unsigned msix_vectors;
-	/* Vectors allocated, excluding per-vq vectors if any */
-	unsigned msix_used_vectors;
-
-	/* Whether we have vector per vq */
-	bool per_vq_vectors;
-
-	struct virtqueue *(*setup_vq)(struct virtio_pci_device *vp_dev,
-				      struct virtio_pci_vq_info *info,
-				      unsigned idx,
-				      void (*callback)(struct virtqueue *vq),
-				      const char *name,
-				      u16 msix_vec);
-	void (*del_vq)(struct virtio_pci_vq_info *info);
-	u16 (*config_vector)(struct virtio_pci_device *vp_dev, u16 vector);
-};
-
-/* Constants for MSI-X */
-/* Use first vector for configuration changes, second and the rest for
- * virtqueues Thus, we need at least 2 vectors for MSI. */
-enum {
-	VP_MSIX_CONFIG_VECTOR = 0,
-	VP_MSIX_VQ_VECTOR = 1,
-};
-
-/* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
-static const struct pci_device_id virtio_pci_id_table[] = {
-	{ PCI_DEVICE(0x1af4, PCI_ANY_ID) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, virtio_pci_id_table);
-
-/* Convert a generic virtio device to our structure */
-static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
-{
-	return container_of(vdev, struct virtio_pci_device, vdev);
-}
-
-/* virtio config->get_features() implementation */
-static u64 vp_get_features(struct virtio_device *vdev)
-{
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-
-	/* When someone needs more than 32 feature bits, we'll need to
-	 * steal a bit to indicate that the rest are somewhere else. */
-	return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
-}
-
-/* virtio config->finalize_features() implementation */
-static int vp_finalize_features(struct virtio_device *vdev)
-{
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-
-	/* Give virtio_ring a chance to accept features. */
-	vring_transport_features(vdev);
-
-	/* Make sure we don't have any features > 32 bits! */
-	BUG_ON((u32)vdev->features != vdev->features);
-
-	/* We only support 32 feature bits. */
-	iowrite32(vdev->features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
-
-	return 0;
-}
-
-/* virtio config->get() implementation */
-static void vp_get(struct virtio_device *vdev, unsigned offset,
-		   void *buf, unsigned len)
-{
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr +
-				VIRTIO_PCI_CONFIG(vp_dev) + offset;
-	u8 *ptr = buf;
-	int i;
-
-	for (i = 0; i < len; i++)
-		ptr[i] = ioread8(ioaddr + i);
-}
-
-/* the config->set() implementation.  it's symmetric to the config->get()
- * implementation */
-static void vp_set(struct virtio_device *vdev, unsigned offset,
-		   const void *buf, unsigned len)
-{
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr +
-				VIRTIO_PCI_CONFIG(vp_dev) + offset;
-	const u8 *ptr = buf;
-	int i;
-
-	for (i = 0; i < len; i++)
-		iowrite8(ptr[i], ioaddr + i);
-}
-
-/* config->{get,set}_status() implementations */
-static u8 vp_get_status(struct virtio_device *vdev)
-{
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	return ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
-}
-
-static void vp_set_status(struct virtio_device *vdev, u8 status)
-{
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	/* We should never be setting status to 0. */
-	BUG_ON(status == 0);
-	iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
-}
+#include "virtio_pci.h"
 
 /* wait for pending irq handlers */
-static void vp_synchronize_vectors(struct virtio_device *vdev)
+void vp_synchronize_vectors(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	int i;
@@ -198,20 +29,8 @@ static void vp_synchronize_vectors(struct virtio_device *vdev)
 		synchronize_irq(vp_dev->msix_entries[i].vector);
 }
 
-static void vp_reset(struct virtio_device *vdev)
-{
-	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	/* 0 status means a reset. */
-	iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
-	/* Flush out the status write, and flush in device writes,
-	 * including MSi-X interrupts, if any. */
-	ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
-	/* Flush pending VQ/configuration callbacks. */
-	vp_synchronize_vectors(vdev);
-}
-
 /* the notify function used when creating a virt queue */
-static bool vp_notify(struct virtqueue *vq)
+bool vp_notify(struct virtqueue *vq)
 {
 	/* we write the queue's selector into the notification register to
 	 * signal the other end */
@@ -272,15 +91,6 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
 	return vp_vring_interrupt(irq, opaque);
 }
 
-u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
-{
-	/* Setup the vector used for configuration events */
-	iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-	/* Verify we had enough resources to assign the vector */
-	/* Will also flush the write out to device */
-	return ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-}
-
 static void vp_free_vectors(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
@@ -401,68 +211,6 @@ static int vp_request_intx(struct virtio_device *vdev)
 	return err;
 }
 
-static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
-				  struct virtio_pci_vq_info *info,
-				  unsigned index,
-				  void (*callback)(struct virtqueue *vq),
-				  const char *name,
-				  u16 msix_vec)
-{
-	struct virtqueue *vq;
-	unsigned long size;
-	u16 num;
-	int err;
-
-	/* Select the queue we're interested in */
-	iowrite16(index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
-
-	/* Check if queue is either not available or already active. */
-	num = ioread16(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NUM);
-	if (!num || ioread32(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN))
-		return ERR_PTR(-ENOENT);
-
-	info->num = num;
-	info->msix_vector = msix_vec;
-
-	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
-	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
-	if (info->queue == NULL)
-		return ERR_PTR(-ENOMEM);
-
-	/* activate the queue */
-	iowrite32(virt_to_phys(info->queue) >> VIRTIO_PCI_QUEUE_ADDR_SHIFT,
-		  vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
-
-	/* create the vring */
-	vq = vring_new_virtqueue(index, info->num,
-				 VIRTIO_PCI_VRING_ALIGN, &vp_dev->vdev,
-				 true, info->queue, vp_notify, callback, name);
-	if (!vq) {
-		err = -ENOMEM;
-		goto out_activate_queue;
-	}
-
-	vq->priv = (void __force *)vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY;
-
-	if (msix_vec != VIRTIO_MSI_NO_VECTOR) {
-		iowrite16(msix_vec, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
-		msix_vec = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
-		if (msix_vec == VIRTIO_MSI_NO_VECTOR) {
-			err = -EBUSY;
-			goto out_assign;
-		}
-	}
-
-	return vq;
-
-out_assign:
-	vring_del_virtqueue(vq);
-out_activate_queue:
-	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
-	free_pages_exact(info->queue, size);
-	return ERR_PTR(err);
-}
-
 static struct virtqueue *vp_setup_vq(struct virtio_device *vdev, unsigned index,
 				     void (*callback)(struct virtqueue *vq),
 				     const char *name,
@@ -498,30 +246,6 @@ out_info:
 	return vq;
 }
 
-static void del_vq(struct virtio_pci_vq_info *info)
-{
-	struct virtqueue *vq = info->vq;
-	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
-	unsigned long size;
-
-	iowrite16(vq->index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
-
-	if (vp_dev->msix_enabled) {
-		iowrite16(VIRTIO_MSI_NO_VECTOR,
-			  vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
-		/* Flush the write out to device */
-		ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
-	}
-
-	vring_del_virtqueue(vq);
-
-	/* Select and deactivate the queue */
-	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
-
-	size = PAGE_ALIGN(vring_size(info->num, VIRTIO_PCI_VRING_ALIGN));
-	free_pages_exact(info->queue, size);
-}
-
 static void vp_del_vq(struct virtqueue *vq)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
@@ -537,7 +261,7 @@ static void vp_del_vq(struct virtqueue *vq)
 }
 
 /* the config->del_vqs() implementation */
-static void vp_del_vqs(struct virtio_device *vdev)
+void vp_del_vqs(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtqueue *vq, *n;
@@ -637,10 +361,10 @@ error_find:
 }
 
 /* the config->find_vqs() implementation */
-static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
-		       struct virtqueue *vqs[],
-		       vq_callback_t *callbacks[],
-		       const char *names[])
+int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		struct virtqueue *vqs[],
+		vq_callback_t *callbacks[],
+		const char *names[])
 {
 	int err;
 
@@ -658,7 +382,7 @@ static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 				  false, false);
 }
 
-static const char *vp_bus_name(struct virtio_device *vdev)
+const char *vp_bus_name(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 
@@ -670,7 +394,7 @@ static const char *vp_bus_name(struct virtio_device *vdev)
  * - OR over all affinities for shared MSI
  * - ignore the affinity request if we're using INTX
  */
-static int vp_set_vq_affinity(struct virtqueue *vq, int cpu)
+int vp_set_vq_affinity(struct virtqueue *vq, int cpu)
 {
 	struct virtio_device *vdev = vq->vdev;
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
@@ -694,21 +418,7 @@ static int vp_set_vq_affinity(struct virtqueue *vq, int cpu)
 	return 0;
 }
 
-static const struct virtio_config_ops virtio_pci_config_ops = {
-	.get		= vp_get,
-	.set		= vp_set,
-	.get_status	= vp_get_status,
-	.set_status	= vp_set_status,
-	.reset		= vp_reset,
-	.find_vqs	= vp_find_vqs,
-	.del_vqs	= vp_del_vqs,
-	.get_features	= vp_get_features,
-	.finalize_features = vp_finalize_features,
-	.bus_name	= vp_bus_name,
-	.set_vq_affinity = vp_set_vq_affinity,
-};
-
-static void virtio_pci_release_dev(struct device *_d)
+void virtio_pci_release_dev(struct device *_d)
 {
 	/*
 	 * No need for a release method as we allocate/free
@@ -717,100 +427,6 @@ static void virtio_pci_release_dev(struct device *_d)
 	 */
 }
 
-/* the PCI probing function */
-static int virtio_pci_probe(struct pci_dev *pci_dev,
-			    const struct pci_device_id *id)
-{
-	struct virtio_pci_device *vp_dev;
-	int err;
-
-	/* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */
-	if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f)
-		return -ENODEV;
-
-	if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) {
-		printk(KERN_ERR "virtio_pci: expected ABI version %d, got %d\n",
-		       VIRTIO_PCI_ABI_VERSION, pci_dev->revision);
-		return -ENODEV;
-	}
-
-	/* allocate our structure and fill it out */
-	vp_dev = kzalloc(sizeof(struct virtio_pci_device), GFP_KERNEL);
-	if (vp_dev == NULL)
-		return -ENOMEM;
-
-	vp_dev->vdev.dev.parent = &pci_dev->dev;
-	vp_dev->vdev.dev.release = virtio_pci_release_dev;
-	vp_dev->vdev.config = &virtio_pci_config_ops;
-	vp_dev->pci_dev = pci_dev;
-	INIT_LIST_HEAD(&vp_dev->virtqueues);
-	spin_lock_init(&vp_dev->lock);
-
-	/* Disable MSI/MSIX to bring device to a known good state. */
-	pci_msi_off(pci_dev);
-
-	/* enable the device */
-	err = pci_enable_device(pci_dev);
-	if (err)
-		goto out;
-
-	err = pci_request_regions(pci_dev, "virtio-pci");
-	if (err)
-		goto out_enable_device;
-
-	vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
-	if (vp_dev->ioaddr == NULL) {
-		err = -ENOMEM;
-		goto out_req_regions;
-	}
-
-	vp_dev->isr = vp_dev->ioaddr + VIRTIO_PCI_ISR;
-
-	pci_set_drvdata(pci_dev, vp_dev);
-	pci_set_master(pci_dev);
-
-	/* we use the subsystem vendor/device id as the virtio vendor/device
-	 * id.  this allows us to use the same PCI vendor/device id for all
-	 * virtio devices and to identify the particular virtio driver by
-	 * the subsystem ids */
-	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
-	vp_dev->vdev.id.device = pci_dev->subsystem_device;
-
-	vp_dev->config_vector = vp_config_vector;
-	vp_dev->setup_vq = setup_vq;
-	vp_dev->del_vq = del_vq;
-
-	/* finally register the virtio device */
-	err = register_virtio_device(&vp_dev->vdev);
-	if (err)
-		goto out_set_drvdata;
-
-	return 0;
-
-out_set_drvdata:
-	pci_iounmap(pci_dev, vp_dev->ioaddr);
-out_req_regions:
-	pci_release_regions(pci_dev);
-out_enable_device:
-	pci_disable_device(pci_dev);
-out:
-	kfree(vp_dev);
-	return err;
-}
-
-static void virtio_pci_remove(struct pci_dev *pci_dev)
-{
-	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
-
-	unregister_virtio_device(&vp_dev->vdev);
-
-	vp_del_vqs(&vp_dev->vdev);
-	pci_iounmap(pci_dev, vp_dev->ioaddr);
-	pci_release_regions(pci_dev);
-	pci_disable_device(pci_dev);
-	kfree(vp_dev);
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int virtio_pci_freeze(struct device *dev)
 {
@@ -839,19 +455,7 @@ static int virtio_pci_restore(struct device *dev)
 	return virtio_device_restore(&vp_dev->vdev);
 }
 
-static const struct dev_pm_ops virtio_pci_pm_ops = {
+const struct dev_pm_ops virtio_pci_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(virtio_pci_freeze, virtio_pci_restore)
 };
 #endif
-
-static struct pci_driver virtio_pci_driver = {
-	.name		= "virtio-pci",
-	.id_table	= virtio_pci_id_table,
-	.probe		= virtio_pci_probe,
-	.remove		= virtio_pci_remove,
-#ifdef CONFIG_PM_SLEEP
-	.driver.pm	= &virtio_pci_pm_ops,
-#endif
-};
-
-module_pci_driver(virtio_pci_driver);
diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
new file mode 100644
index 0000000..9fdec9a
--- /dev/null
+++ b/drivers/virtio/virtio_pci_legacy.c
@@ -0,0 +1,323 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "virtio_pci.h"
+
+/* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
+static const struct pci_device_id virtio_pci_id_table[] = {
+	{ PCI_DEVICE(0x1af4, PCI_ANY_ID) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, virtio_pci_id_table);
+
+/* virtio config->get_features() implementation */
+static u64 vp_get_features(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+
+	/* When someone needs more than 32 feature bits, we'll need to
+	 * steal a bit to indicate that the rest are somewhere else. */
+	return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
+}
+
+/* virtio config->finalize_features() implementation */
+static int vp_finalize_features(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
+	/* Make sure we don't have any features > 32 bits! */
+	BUG_ON((u32)vdev->features != vdev->features);
+
+	/* We only support 32 feature bits. */
+	iowrite32(vdev->features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
+
+	return 0;
+}
+
+/* virtio config->get() implementation */
+static void vp_get(struct virtio_device *vdev, unsigned offset,
+		   void *buf, unsigned len)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
+	u8 *ptr = buf;
+	int i;
+
+	for (i = 0; i < len; i++)
+		ptr[i] = ioread8(ioaddr + i);
+}
+
+/* the config->set() implementation.  it's symmetric to the config->get()
+ * implementation */
+static void vp_set(struct virtio_device *vdev, unsigned offset,
+		   const void *buf, unsigned len)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
+	const u8 *ptr = buf;
+	int i;
+
+	for (i = 0; i < len; i++)
+		iowrite8(ptr[i], ioaddr + i);
+}
+
+/* config->{get,set}_status() implementations */
+static u8 vp_get_status(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	return ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+}
+
+static void vp_set_status(struct virtio_device *vdev, u8 status)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	/* We should never be setting status to 0. */
+	BUG_ON(status == 0);
+	iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+}
+
+static void vp_reset(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	/* 0 status means a reset. */
+	iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+	/* Flush out the status write, and flush in device writes,
+	 * including MSi-X interrupts, if any. */
+	ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+	/* Flush pending VQ/configuration callbacks. */
+	vp_synchronize_vectors(vdev);
+}
+
+u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
+{
+	/* Setup the vector used for configuration events */
+	iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+	/* Verify we had enough resources to assign the vector */
+	/* Will also flush the write out to device */
+	return ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+}
+
+static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
+				  struct virtio_pci_vq_info *info,
+				  unsigned index,
+				  void (*callback)(struct virtqueue *vq),
+				  const char *name,
+				  u16 msix_vec)
+{
+	struct virtqueue *vq;
+	unsigned long size;
+	u16 num;
+	int err;
+
+	/* Select the queue we're interested in */
+	iowrite16(index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+
+	/* Check if queue is either not available or already active. */
+	num = ioread16(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NUM);
+	if (!num || ioread32(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN))
+		return ERR_PTR(-ENOENT);
+
+	info->num = num;
+	info->msix_vector = msix_vec;
+
+	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
+	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
+	if (info->queue == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	/* activate the queue */
+	iowrite32(virt_to_phys(info->queue) >> VIRTIO_PCI_QUEUE_ADDR_SHIFT,
+		  vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
+
+	/* create the vring */
+	vq = vring_new_virtqueue(index, info->num,
+				 VIRTIO_PCI_VRING_ALIGN, &vp_dev->vdev,
+				 true, info->queue, vp_notify, callback, name);
+	if (!vq) {
+		err = -ENOMEM;
+		goto out_activate_queue;
+	}
+
+	vq->priv = (void __force *)vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY;
+
+	if (msix_vec != VIRTIO_MSI_NO_VECTOR) {
+		iowrite16(msix_vec, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		msix_vec = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		if (msix_vec == VIRTIO_MSI_NO_VECTOR) {
+			err = -EBUSY;
+			goto out_assign;
+		}
+	}
+
+	return vq;
+
+out_assign:
+	vring_del_virtqueue(vq);
+out_activate_queue:
+	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
+	free_pages_exact(info->queue, size);
+	return ERR_PTR(err);
+}
+
+static void del_vq(struct virtio_pci_vq_info *info)
+{
+	struct virtqueue *vq = info->vq;
+	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
+	unsigned long size;
+
+	iowrite16(vq->index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+
+	if (vp_dev->msix_enabled) {
+		iowrite16(VIRTIO_MSI_NO_VECTOR,
+			  vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		/* Flush the write out to device */
+		ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
+	}
+
+	vring_del_virtqueue(vq);
+
+	/* Select and deactivate the queue */
+	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
+
+	size = PAGE_ALIGN(vring_size(info->num, VIRTIO_PCI_VRING_ALIGN));
+	free_pages_exact(info->queue, size);
+}
+
+static const struct virtio_config_ops virtio_pci_config_ops = {
+	.get		= vp_get,
+	.set		= vp_set,
+	.get_status	= vp_get_status,
+	.set_status	= vp_set_status,
+	.reset		= vp_reset,
+	.find_vqs	= vp_find_vqs,
+	.del_vqs	= vp_del_vqs,
+	.get_features	= vp_get_features,
+	.finalize_features = vp_finalize_features,
+	.bus_name	= vp_bus_name,
+	.set_vq_affinity = vp_set_vq_affinity,
+};
+
+/* the PCI probing function */
+static int virtio_pci_probe(struct pci_dev *pci_dev,
+			    const struct pci_device_id *id)
+{
+	struct virtio_pci_device *vp_dev;
+	int err;
+
+	/* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */
+	if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f)
+		return -ENODEV;
+
+	if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) {
+		printk(KERN_ERR "virtio_pci: expected ABI version %d, got %d\n",
+		       VIRTIO_PCI_ABI_VERSION, pci_dev->revision);
+		return -ENODEV;
+	}
+
+	/* allocate our structure and fill it out */
+	vp_dev = kzalloc(sizeof(struct virtio_pci_device), GFP_KERNEL);
+	if (vp_dev == NULL)
+		return -ENOMEM;
+
+	vp_dev->vdev.dev.parent = &pci_dev->dev;
+	vp_dev->vdev.dev.release = virtio_pci_release_dev;
+	vp_dev->vdev.config = &virtio_pci_config_ops;
+	vp_dev->pci_dev = pci_dev;
+	INIT_LIST_HEAD(&vp_dev->virtqueues);
+	spin_lock_init(&vp_dev->lock);
+
+	/* Disable MSI/MSIX to bring device to a known good state. */
+	pci_msi_off(pci_dev);
+
+	/* enable the device */
+	err = pci_enable_device(pci_dev);
+	if (err)
+		goto out;
+
+	err = pci_request_regions(pci_dev, "virtio-pci");
+	if (err)
+		goto out_enable_device;
+
+	vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
+	if (vp_dev->ioaddr == NULL) {
+		err = -ENOMEM;
+		goto out_req_regions;
+	}
+
+	vp_dev->isr = vp_dev->ioaddr + VIRTIO_PCI_ISR;
+
+	pci_set_drvdata(pci_dev, vp_dev);
+	pci_set_master(pci_dev);
+
+	/* we use the subsystem vendor/device id as the virtio vendor/device
+	 * id.  this allows us to use the same PCI vendor/device id for all
+	 * virtio devices and to identify the particular virtio driver by
+	 * the subsystem ids */
+	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
+	vp_dev->vdev.id.device = pci_dev->subsystem_device;
+
+	vp_dev->config_vector = vp_config_vector;
+	vp_dev->setup_vq = setup_vq;
+	vp_dev->del_vq = del_vq;
+
+	/* finally register the virtio device */
+	err = register_virtio_device(&vp_dev->vdev);
+	if (err)
+		goto out_set_drvdata;
+
+	return 0;
+
+out_set_drvdata:
+	pci_iounmap(pci_dev, vp_dev->ioaddr);
+out_req_regions:
+	pci_release_regions(pci_dev);
+out_enable_device:
+	pci_disable_device(pci_dev);
+out:
+	kfree(vp_dev);
+	return err;
+}
+
+static void virtio_pci_remove(struct pci_dev *pci_dev)
+{
+	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
+
+	unregister_virtio_device(&vp_dev->vdev);
+
+	vp_del_vqs(&vp_dev->vdev);
+	pci_iounmap(pci_dev, vp_dev->ioaddr);
+	pci_release_regions(pci_dev);
+	pci_disable_device(pci_dev);
+	kfree(vp_dev);
+}
+
+static struct pci_driver virtio_pci_driver = {
+	.name		= "virtio-pci",
+	.id_table	= virtio_pci_id_table,
+	.probe		= virtio_pci_probe,
+	.remove		= virtio_pci_remove,
+#ifdef CONFIG_PM_SLEEP
+	.driver.pm	= &virtio_pci_pm_ops,
+#endif
+};
+
+module_pci_driver(virtio_pci_driver);
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index 9076635..92a3839 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -1,4 +1,4 @@
 obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
 obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
-obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
+obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o virtio_pci_legacy.o
 obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
-- 
MST

Re: [PATCH 8/9] virtio_pci: split out legacy device support

[Herbert Xu]

Michael S. Tsirkin <mst@redhat.com> wrote:
> Move everything dealing with legacy devices out to virtio_pci_legacy.c.
> Expose common code APIs in virtio_pci.h
> 
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This breaks virtio_pci because you deleted the licence from it.

-- >8 --
Subject: virtio_pci: Restore module licence and other attributes

When the virtio_pci driver was moved into virtio_pci_legacy.c the
module licence and other attributes went AWOL.  This patch restores
them.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
index 2588252..6b100e3 100644
--- a/drivers/virtio/virtio_pci_legacy.c
+++ b/drivers/virtio/virtio_pci_legacy.c
@@ -324,3 +324,8 @@ static struct pci_driver virtio_pci_driver = {
 };
 
 module_pci_driver(virtio_pci_driver);
+
+MODULE_AUTHOR("Anthony Liguori <aliguori@us.ibm.com>");
+MODULE_DESCRIPTION("virtio-pci");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1");

Cheers,
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

Re: [PATCH 8/9] virtio_pci: split out legacy device support

[Michael S. Tsirkin]

On Wed, Dec 17, 2014 at 08:03:10AM +1100, Herbert Xu wrote:
> Michael S. Tsirkin <mst@redhat.com> wrote:
> > Move everything dealing with legacy devices out to virtio_pci_legacy.c.
> > Expose common code APIs in virtio_pci.h
> > 
> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> 
> This breaks virtio_pci because you deleted the licence from it.
> 
> -- >8 --
> Subject: virtio_pci: Restore module licence and other attributes
> 
> When the virtio_pci driver was moved into virtio_pci_legacy.c the
> module licence and other attributes went AWOL.  This patch restores
> them.
> 
> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Thanks!
I'll apply a similar patch but to virtio_pci_common.
Will send a pull request with this included tomorrow.

> diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
> index 2588252..6b100e3 100644
> --- a/drivers/virtio/virtio_pci_legacy.c
> +++ b/drivers/virtio/virtio_pci_legacy.c
> @@ -324,3 +324,8 @@ static struct pci_driver virtio_pci_driver = {
>  };
>  
>  module_pci_driver(virtio_pci_driver);
> +
> +MODULE_AUTHOR("Anthony Liguori <aliguori@us.ibm.com>");
> +MODULE_DESCRIPTION("virtio-pci");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1");
> 
> Cheers,
> -- 
> Email: Herbert Xu <herbert@gondor.apana.org.au>
> Home Page: http://gondor.apana.org.au/~herbert/
> PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

Re: [PATCH 8/9] virtio_pci: split out legacy device support

[Michael S. Tsirkin]

On Wed, Dec 17, 2014 at 08:03:10AM +1100, Herbert Xu wrote:
> Michael S. Tsirkin <mst@redhat.com> wrote:
> > Move everything dealing with legacy devices out to virtio_pci_legacy.c.
> > Expose common code APIs in virtio_pci.h
> > 
> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> 
> This breaks virtio_pci because you deleted the licence from it.
> 
> -- >8 --
> Subject: virtio_pci: Restore module licence and other attributes
> 
> When the virtio_pci driver was moved into virtio_pci_legacy.c the
> module licence and other attributes went AWOL.  This patch restores
> them.
> 
> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

I applied this with a minor tweak, and pushed to linux-next.
Unfortunately it's very late here, so I can't test properly
and send pull request today, but will try to do tomorrow.

The tree with a fix is here:
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git for_linus

> diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
> index 2588252..6b100e3 100644
> --- a/drivers/virtio/virtio_pci_legacy.c
> +++ b/drivers/virtio/virtio_pci_legacy.c
> @@ -324,3 +324,8 @@ static struct pci_driver virtio_pci_driver = {
>  };
>  
>  module_pci_driver(virtio_pci_driver);
> +
> +MODULE_AUTHOR("Anthony Liguori <aliguori@us.ibm.com>");
> +MODULE_DESCRIPTION("virtio-pci");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1");
> 
> Cheers,
> -- 
> Email: Herbert Xu <herbert@gondor.apana.org.au>
> Home Page: http://gondor.apana.org.au/~herbert/
> PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

[PATCH 9/9] virtio_pci: update file descriptions and copyright

[Michael S. Tsirkin]

There's been a lot of changes since 2007.
List main authors, add Red Hat copyright.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci.h        | 5 ++++-
 drivers/virtio/virtio_pci.c        | 5 ++++-
 drivers/virtio/virtio_pci_legacy.c | 5 ++++-
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/virtio/virtio_pci.h b/drivers/virtio/virtio_pci.h
index a3b1259..fba383c 100644
--- a/drivers/virtio/virtio_pci.h
+++ b/drivers/virtio/virtio_pci.h
@@ -1,15 +1,18 @@
 #ifndef _DRIVERS_VIRTIO_VIRTIO_PCI_H
 #define _DRIVERS_VIRTIO_VIRTIO_PCI_H
 /*
- * Virtio PCI driver
+ * Virtio PCI driver - APIs for common functionality for all device versions
  *
  * This module allows virtio devices to be used over a virtual PCI device.
  * This can be used with QEMU based VMMs like KVM or Xen.
  *
  * Copyright IBM Corp. 2007
+ * Copyright Red Hat, Inc. 2014
  *
  * Authors:
  *  Anthony Liguori  <aliguori@us.ibm.com>
+ *  Rusty Russell <rusty@rustcorp.com.au>
+ *  Michael S. Tsirkin <mst@redhat.com>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 6c7e186..c263f67 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -1,13 +1,16 @@
 /*
- * Virtio PCI driver
+ * Virtio PCI driver - common functionality for all device versions
  *
  * This module allows virtio devices to be used over a virtual PCI device.
  * This can be used with QEMU based VMMs like KVM or Xen.
  *
  * Copyright IBM Corp. 2007
+ * Copyright Red Hat, Inc. 2014
  *
  * Authors:
  *  Anthony Liguori  <aliguori@us.ibm.com>
+ *  Rusty Russell <rusty@rustcorp.com.au>
+ *  Michael S. Tsirkin <mst@redhat.com>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
index 9fdec9a..1ca4422 100644
--- a/drivers/virtio/virtio_pci_legacy.c
+++ b/drivers/virtio/virtio_pci_legacy.c
@@ -1,13 +1,16 @@
 /*
- * Virtio PCI driver
+ * Virtio PCI driver - legacy device support
  *
  * This module allows virtio devices to be used over a virtual PCI device.
  * This can be used with QEMU based VMMs like KVM or Xen.
  *
  * Copyright IBM Corp. 2007
+ * Copyright Red Hat, Inc. 2014
  *
  * Authors:
  *  Anthony Liguori  <aliguori@us.ibm.com>
+ *  Rusty Russell <rusty@rustcorp.com.au>
+ *  Michael S. Tsirkin <mst@redhat.com>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
-- 
MST

Re: [PATCH 9/9] virtio_pci: update file descriptions and copyright

[Rusty Russell]

"Michael S. Tsirkin" <mst@redhat.com> writes:
> There's been a lot of changes since 2007.
> List main authors, add Red Hat copyright.

Acked-by: Rusty Russell <rusty@rustcorp.com.au>

Cheers,
Rusty.

> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>  drivers/virtio/virtio_pci.h        | 5 ++++-
>  drivers/virtio/virtio_pci.c        | 5 ++++-
>  drivers/virtio/virtio_pci_legacy.c | 5 ++++-
>  3 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/virtio/virtio_pci.h b/drivers/virtio/virtio_pci.h
> index a3b1259..fba383c 100644
> --- a/drivers/virtio/virtio_pci.h
> +++ b/drivers/virtio/virtio_pci.h
> @@ -1,15 +1,18 @@
>  #ifndef _DRIVERS_VIRTIO_VIRTIO_PCI_H
>  #define _DRIVERS_VIRTIO_VIRTIO_PCI_H
>  /*
> - * Virtio PCI driver
> + * Virtio PCI driver - APIs for common functionality for all device versions
>   *
>   * This module allows virtio devices to be used over a virtual PCI device.
>   * This can be used with QEMU based VMMs like KVM or Xen.
>   *
>   * Copyright IBM Corp. 2007
> + * Copyright Red Hat, Inc. 2014
>   *
>   * Authors:
>   *  Anthony Liguori  <aliguori@us.ibm.com>
> + *  Rusty Russell <rusty@rustcorp.com.au>
> + *  Michael S. Tsirkin <mst@redhat.com>
>   *
>   * This work is licensed under the terms of the GNU GPL, version 2 or later.
>   * See the COPYING file in the top-level directory.
> diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
> index 6c7e186..c263f67 100644
> --- a/drivers/virtio/virtio_pci.c
> +++ b/drivers/virtio/virtio_pci.c
> @@ -1,13 +1,16 @@
>  /*
> - * Virtio PCI driver
> + * Virtio PCI driver - common functionality for all device versions
>   *
>   * This module allows virtio devices to be used over a virtual PCI device.
>   * This can be used with QEMU based VMMs like KVM or Xen.
>   *
>   * Copyright IBM Corp. 2007
> + * Copyright Red Hat, Inc. 2014
>   *
>   * Authors:
>   *  Anthony Liguori  <aliguori@us.ibm.com>
> + *  Rusty Russell <rusty@rustcorp.com.au>
> + *  Michael S. Tsirkin <mst@redhat.com>
>   *
>   * This work is licensed under the terms of the GNU GPL, version 2 or later.
>   * See the COPYING file in the top-level directory.
> diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
> index 9fdec9a..1ca4422 100644
> --- a/drivers/virtio/virtio_pci_legacy.c
> +++ b/drivers/virtio/virtio_pci_legacy.c
> @@ -1,13 +1,16 @@
>  /*
> - * Virtio PCI driver
> + * Virtio PCI driver - legacy device support
>   *
>   * This module allows virtio devices to be used over a virtual PCI device.
>   * This can be used with QEMU based VMMs like KVM or Xen.
>   *
>   * Copyright IBM Corp. 2007
> + * Copyright Red Hat, Inc. 2014
>   *
>   * Authors:
>   *  Anthony Liguori  <aliguori@us.ibm.com>
> + *  Rusty Russell <rusty@rustcorp.com.au>
> + *  Michael S. Tsirkin <mst@redhat.com>
>   *
>   * This work is licensed under the terms of the GNU GPL, version 2 or later.
>   * See the COPYING file in the top-level directory.
> -- 
> MST