LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sneeker Yeh <sneeker.yeh@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, Felipe Balbi <balbi@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mathias Nyman <mathias.nyman@intel.com>,
Grant Likely <grant.likely@linaro.org>,
Huang Rui <ray.huang@amd.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, linux-omap@vger.kernel.org
Cc: Andy Green <andy.green@linaro.org>,
Jassi Brar <jaswinder.singh@linaro.org>,
Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>
Subject: [PATCH v2 3/5] usb: dwc3: Add quirk for Synopsis device disconnection errata
Date: Mon, 19 Jan 2015 15:56:47 +0800 [thread overview]
Message-ID: <1421654209-6486-4-git-send-email-Sneeker.Yeh@tw.fujitsu.com> (raw)
In-Reply-To: <1421654209-6486-1-git-send-email-Sneeker.Yeh@tw.fujitsu.com>
Synopsis Designware USB3 IP earlier than v3.00a which is configured in silicon
with DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, would need a specific quirk to prevent
xhci host controller from dying when device is disconnected.
Since DWC_USB3_SUSPEND_ON_DISCONNECT_EN is an IP configuration whose state
cannot be checked from software in runtime, it has to be enabled via platform
data or device tree.
Signed-off-by: Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 17 +++++++++++++++++
drivers/usb/dwc3/core.c | 6 ++++++
drivers/usb/dwc3/core.h | 1 +
drivers/usb/dwc3/host.c | 4 ++++
drivers/usb/dwc3/platform_data.h | 1 +
5 files changed, 29 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index cd7f045..1b78b29 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -37,6 +37,23 @@ Optional properties:
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
+ - snps,has_suspend_on_disconnect: true when IP is configured in silicon with
+ DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, it can inject a
+ specific quirk to prevent xhci host controller from
+ dying when usb device is disconnected from root hub.
+ Since DWC_USB3_SUSPEND_ON_DISCONNECT_EN is an IP
+ configuration whose state cannot be checked from
+ software in runtime, it has to be enabled via platform
+ data or device tree.
+
+ xhci host dying symptom here is caused by that
+ DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1
+ configuration makes IP auto-suspended after PORTCSC is
+ cleared when usb device detached, then an asynchronous
+ disconnection procedure might fail using endpoint
+ command that suspened IP won't have any response to.
+
+ this issue is fixed when IP version >= 3.00a.
This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 25ddc39..fbceab1 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -838,6 +838,9 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,tx_de_emphasis_quirk");
of_property_read_u8(node, "snps,tx_de_emphasis",
&tx_de_emphasis);
+
+ dwc->suspend_on_disconnect_quirk = of_property_read_bool(node,
+ "snps,has_suspend_on_disconnect");
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -864,6 +867,9 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
if (pdata->tx_de_emphasis)
tx_de_emphasis = pdata->tx_de_emphasis;
+
+ dwc->suspend_on_disconnect_quirk =
+ pdata->has_suspend_on_disconnect;
}
/* default to superspeed if no maximum_speed passed */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 8090249..d7458ff 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -832,6 +832,7 @@ struct dwc3 {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+ unsigned suspend_on_disconnect_quirk:1;
};
/* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 12bfd3c..9c42074 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -53,6 +53,10 @@ int dwc3_host_init(struct dwc3 *dwc)
pdata.usb3_lpm_capable = 1;
#endif
+ if ((dwc->revision < DWC3_REVISION_300A) &&
+ dwc->suspend_on_disconnect_quirk)
+ pdata.delay_portcsc_clear = 1;
+
ret = platform_device_add_data(xhci, &pdata, sizeof(pdata));
if (ret) {
dev_err(dwc->dev, "couldn't add platform data to xHCI device\n");
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index a3a3b6d..69562f1 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -44,4 +44,5 @@ struct dwc3_platform_data {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+ unsigned has_suspend_on_disconnect:1;
};
--
1.7.9.5
next prev parent reply other threads:[~2015-01-19 7:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-19 7:56 [PATCH v2 0/5] Add support for Fujitsu USB host controller Sneeker Yeh
2015-01-19 7:56 ` [PATCH v2 1/5] usb: dwc3: add Fujitsu Specific Glue layer Sneeker Yeh
2015-01-19 14:48 ` Felipe Balbi
2015-01-19 7:56 ` [PATCH v2 2/5] usb: dwc3: add revision number DWC3_REVISION_300A Sneeker Yeh
2015-01-19 14:46 ` Felipe Balbi
2015-01-19 19:45 ` John Youn
2015-01-19 20:00 ` Felipe Balbi
2015-01-21 8:57 ` Sneeker Yeh
2015-01-19 7:56 ` Sneeker Yeh [this message]
2015-01-19 14:50 ` [PATCH v2 3/5] usb: dwc3: Add quirk for Synopsis device disconnection errata Felipe Balbi
2015-01-21 9:02 ` Sneeker Yeh
2015-01-23 16:20 ` Felipe Balbi
2015-01-19 7:56 ` [PATCH v2 4/5] xhci: Platform: Set Synopsis device disconnection quirk based on platform data Sneeker Yeh
2015-01-19 14:51 ` Felipe Balbi
2015-01-21 8:55 ` Sneeker Yeh
2015-01-19 7:56 ` [PATCH v2 5/5] xhci: add a quirk for device disconnection errata for Synopsis Designware USB3 core Sneeker Yeh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421654209-6486-4-git-send-email-Sneeker.Yeh@tw.fujitsu.com \
--to=sneeker.yeh@gmail.com \
--cc=Sneeker.Yeh@tw.fujitsu.com \
--cc=andy.green@linaro.org \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jaswinder.singh@linaro.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathias.nyman@intel.com \
--cc=pawel.moll@arm.com \
--cc=ray.huang@amd.com \
--cc=robh+dt@kernel.org \
--subject='Re: [PATCH v2 3/5] usb: dwc3: Add quirk for Synopsis device disconnection errata' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).