LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
To: "Mark Brown" <broonie@kernel.org>,
"Michal Simek" <michal.simek@xilinx.com>,
"Sören Brinkmann" <soren.brinkmann@xilinx.com>,
linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Subject: [PATCH 01/18] spi/xilinx: Support for spi mode LSB_FIRST
Date: Fri, 23 Jan 2015 17:08:33 +0100 [thread overview]
Message-ID: <1422029330-10971-2-git-send-email-ricardo.ribalda@gmail.com> (raw)
In-Reply-To: <1422029330-10971-1-git-send-email-ricardo.ribalda@gmail.com>
Hardware supports LSB_FIRST mode. Support it also in the driver.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
drivers/spi/spi-xilinx.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 79bd84f..d4edeee 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -34,7 +34,8 @@
#define XSPI_CR_MASTER_MODE 0x04
#define XSPI_CR_CPOL 0x08
#define XSPI_CR_CPHA 0x10
-#define XSPI_CR_MODE_MASK (XSPI_CR_CPHA | XSPI_CR_CPOL)
+#define XSPI_CR_MODE_MASK (XSPI_CR_CPHA | XSPI_CR_CPOL | \
+ XSPI_CR_LSB_FIRST)
#define XSPI_CR_TXFIFO_RESET 0x20
#define XSPI_CR_RXFIFO_RESET 0x40
#define XSPI_CR_MANUAL_SSELECT 0x80
@@ -194,6 +195,8 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
cr |= XSPI_CR_CPHA;
if (spi->mode & SPI_CPOL)
cr |= XSPI_CR_CPOL;
+ if (spi->mode & SPI_LSB_FIRST)
+ cr |= XSPI_CR_LSB_FIRST;
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
/* We do not check spi->max_speed_hz here as the SPI clock
@@ -353,7 +356,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
return -ENODEV;
/* the spi->mode bits understood by this driver: */
- master->mode_bits = SPI_CPOL | SPI_CPHA;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
xspi = spi_master_get_devdata(master);
xspi->bitbang.master = master;
--
2.1.4
next prev parent reply other threads:[~2015-01-23 16:16 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 16:08 [PATCH 00/18] spi/xilinx: Speed-up Ricardo Ribalda Delgado
2015-01-23 16:08 ` Ricardo Ribalda Delgado [this message]
2015-01-26 19:23 ` [PATCH 01/18] spi/xilinx: Support for spi mode LSB_FIRST Mark Brown
2015-01-23 16:08 ` [PATCH 02/18] spi/xilinx: Support for spi mode LOOP Ricardo Ribalda Delgado
2015-01-26 19:23 ` Mark Brown
2015-01-23 16:08 ` [PATCH 03/18] spi/xilinx: Simplify data read from the Rx FIFO Ricardo Ribalda Delgado
2015-01-27 17:25 ` Mark Brown
2015-01-23 16:08 ` [PATCH 04/18] spi-xilinx: Simplify spi_fill_tx_fifo Ricardo Ribalda Delgado
2015-01-26 23:54 ` Mark Brown
2015-01-23 16:08 ` [PATCH 05/18] spi/xilinx: Leave the IRQ always enabled Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 06/18] spi/xilinx: Code cleanup Ricardo Ribalda Delgado
2015-01-27 0:05 ` Mark Brown
2015-01-23 16:08 ` [PATCH 07/18] spi/xilinx: Use cached value of register Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 08/18] spi/xilinx: Support cores with no interrupt Ricardo Ribalda Delgado
2015-01-27 0:04 ` Mark Brown
2015-01-27 19:05 ` Ricardo Ribalda Delgado
2015-01-27 19:49 ` Mark Brown
2015-01-27 19:56 ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 09/18] spi/xilinx: Do not inhibit transmission in polling mode Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 10/18] spi/xilinx: Support for spi mode CS_HIGH Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 11/18] spi/xilinx: Remove rx_fn and tx_fn pointer Ricardo Ribalda Delgado
2015-01-27 0:09 ` Mark Brown
2015-01-27 10:00 ` Ricardo Ribalda Delgado
2015-01-27 15:42 ` Joe Perches
2015-01-27 19:07 ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 12/18] spi/xilinx: Make spi_tx and spi_rx simmetric Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 13/18] spi/xilinx: Convert remainding_bytes in remaining words Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 14/18] spi/xilinx: Convert bits_per_word in bytes_per_word Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 15/18] spi/xilinx: Remove iowrite/ioread wrappers Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 16/18] spi/xilinx: Reset core before buffer_size detection Ricardo Ribalda Delgado
2015-01-27 0:11 ` Mark Brown
2015-01-23 16:08 ` [PATCH 17/18] spi/xilinx: Remove remaining_words driver data variable Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 18/18] spi/xilinx: Check number of slaves range Ricardo Ribalda Delgado
2015-01-27 0:14 ` [PATCH 00/18] spi/xilinx: Speed-up Mark Brown
2015-01-27 10:17 ` Ricardo Ribalda Delgado
2015-01-27 11:59 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422029330-10971-2-git-send-email-ricardo.ribalda@gmail.com \
--to=ricardo.ribalda@gmail.com \
--cc=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=soren.brinkmann@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).