LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sneeker Yeh <sneeker.yeh@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>, Felipe Balbi <balbi@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Grant Likely <grant.likely@linaro.org>,
	Huang Rui <ray.huang@amd.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-omap@vger.kernel.org
Cc: Andy Green <andy.green@linaro.org>,
	Jassi Brar <jaswinder.singh@linaro.org>,
	Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>
Subject: [PATCH v3 0/5] Add support for Fujitsu USB host controller
Date: Sun, 25 Jan 2015 16:13:23 +0800	[thread overview]
Message-ID: <1422173608-24355-1-git-send-email-Sneeker.Yeh@tw.fujitsu.com> (raw)

These patches add support for XHCI compliant Host controller found
on Fujitsu Socs, and are based on http://lwn.net/Articles/629162/
The first patch is to add Fujitsu glue layer of Synopsis DesignWare USB3 driver
and last four patch is about quirk implementation of errata in Synopsis
DesignWare USB3 IP.

Patch 1 introduces a quirk with device disconnection management necessary
Synopsys Designware USB3 IP with versions < 3.00a and hardware configuration
DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. It solves a problem where without the
quirk, that host controller will die after a usb device is disconnected from
port of root hub.

Patch 2 is to set Synopsis quirk in xhci platform driver based on xhci platform
data.

Patch 3 is to add a revison number 2.90a and 3.00a of Synopsis DesignWare USB3
IP core driver.

Patch 4 introduces using a quirk based on a errata of Synopsis
DesignWare USB3 IP which is versions < 3.00a and has hardware configuration
DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, which cannot be read from software. As a
result this quirk has to be enabled via platform data or device tree.

Patch 5 introduces Fujitsu Specific Glue layer in Synopsis DesignWare USB3 IP
driver. 

Successfully tested on Fujitsu mb86s7x board.

Changes since v2 (RFC):
[https://lkml.org/lkml/2014/12/15/929]
 - based on Felipe's comment, re-order patches to avoid breaking bisectability,
 - based on Felipe's comment, add comment to structure's member, and sort it
   alphabetically,
 - based on Felipe's comment, add another v2.90 revision number in dwc3 IP.

Changes since v1 (RFC):
[https://lkml.org/lkml/2014/12/15/929]
 - based on Arnd's comment, remove entire unnecessary Fujitsu EHCI/OHCI glue,
 - based on Felipe's comment, fix mis-using of runtime-pm API and setting dma
   mask, remove unnecessary comment, and refactor suspend/resume handler in
   Fujitsu Specific Glue layer in dwc3,
 - based on Felipe's comment, add more commit log and comments in Synopsis
   quirk implementation, and separate it into four patches.

Sneeker Yeh (5):
  xhci: add a quirk for device disconnection errata for Synopsis
    Designware USB3     core
  xhci: Platform: Set Synopsis device disconnection quirk based on
    platform data
  usb: dwc3: add revision number DWC3_REVISION_290A and
    DWC3_REVISION_300A
  usb: dwc3: Add quirk for Synopsis device disconnection errata
  usb: dwc3: add Fujitsu Specific Glue layer

 Documentation/devicetree/bindings/usb/dwc3.txt     |   17 ++
 .../devicetree/bindings/usb/fujitsu-dwc3.txt       |   33 ++++
 drivers/usb/dwc3/Kconfig                           |   11 ++
 drivers/usb/dwc3/Makefile                          |    1 +
 drivers/usb/dwc3/core.c                            |    6 +
 drivers/usb/dwc3/core.h                            |    6 +
 drivers/usb/dwc3/dwc3-mb86s70.c                    |  206 ++++++++++++++++++++
 drivers/usb/dwc3/host.c                            |    4 +
 drivers/usb/dwc3/platform_data.h                   |    8 +
 drivers/usb/host/xhci-hub.c                        |    4 +
 drivers/usb/host/xhci-plat.c                       |    3 +
 drivers/usb/host/xhci.c                            |   29 +++
 drivers/usb/host/xhci.h                            |   24 +++
 include/linux/usb/xhci_pdriver.h                   |    4 +
 14 files changed, 356 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt
 create mode 100644 drivers/usb/dwc3/dwc3-mb86s70.c

-- 
1.7.9.5


             reply	other threads:[~2015-01-25  8:15 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-25  8:13 Sneeker Yeh [this message]
2015-01-25  8:13 ` [PATCH v3 1/5] xhci: add a quirk for device disconnection errata for Synopsis Designware USB3 core Sneeker Yeh
2015-02-12 13:50   ` Mathias Nyman
2015-02-12 15:18     ` Alan Stern
2015-02-13  8:54       ` Mathias Nyman
2015-02-15 15:09       ` Sneeker Yeh
2015-02-15 14:29     ` Sneeker Yeh
2015-02-16  9:26       ` Mathias Nyman
2015-02-13  9:08   ` Mathias Nyman
2015-01-25  8:13 ` [PATCH v3 2/5] xhci: Platform: Set Synopsis device disconnection quirk based on platform data Sneeker Yeh
2015-01-25  8:13 ` [PATCH v3 3/5] usb: dwc3: add revision number DWC3_REVISION_290A and DWC3_REVISION_300A Sneeker Yeh
2015-01-25  8:13 ` [PATCH v3 4/5] usb: dwc3: Add quirk for Synopsis device disconnection errata Sneeker Yeh
2015-01-25  8:13 ` [PATCH v3 5/5] usb: dwc3: add Fujitsu Specific Glue layer Sneeker Yeh
2015-01-27 15:22 ` [PATCH v3 0/5] Add support for Fujitsu USB host controller Felipe Balbi
2015-01-29 16:23   ` Felipe Balbi
2015-01-30 16:38     ` Felipe Balbi
2015-02-10 15:43       ` Sneeker Yeh
2015-02-11 11:57         ` Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422173608-24355-1-git-send-email-Sneeker.Yeh@tw.fujitsu.com \
    --to=sneeker.yeh@gmail.com \
    --cc=Sneeker.Yeh@tw.fujitsu.com \
    --cc=andy.green@linaro.org \
    --cc=balbi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jaswinder.singh@linaro.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mathias.nyman@intel.com \
    --cc=pawel.moll@arm.com \
    --cc=ray.huang@amd.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v3 0/5] Add support for Fujitsu USB host controller' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).