LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH v2 5/5] clocksource: sun5i: Add clock notifiers
Date: Mon, 26 Jan 2015 10:50:56 +0100	[thread overview]
Message-ID: <1422265856-27631-6-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1422265856-27631-1-git-send-email-maxime.ripard@free-electrons.com>

The parent clock of the sun5i timer is the AHB clock, which rate might change
because of other devices requirements.

This is for example the case on the Allwinner A31, where the DMA controller
needs a minimum rate higher than the default, that is enforced after the timer
driver has probed.

Add clock notifiers to make sure we reflect the clock rate changes in the timer
rates.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/clocksource/timer-sun5i.c | 72 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 377e50450781..5841a956f5f0 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -41,9 +41,13 @@
 struct sun5i_timer {
 	void __iomem		*base;
 	struct clk		*clk;
+	struct notifier_block	clk_rate_cb;
 	u32			ticks_per_jiffy;
 };
 
+#define to_sun5i_timer(x) \
+	container_of(x, struct sun5i_timer, clk_rate_cb)
+
 struct sun5i_timer_clksrc {
 	struct sun5i_timer	timer;
 	struct clocksource	clksrc;
@@ -152,6 +156,30 @@ static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
 	return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
 }
 
+static int sun5i_rate_cb_clksrc(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct sun5i_timer *timer = to_sun5i_timer(nb);
+	struct sun5i_timer_clksrc *cs = container_of(timer,
+						     struct sun5i_timer_clksrc, timer);
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		clocksource_unregister(&cs->clksrc);
+		break;
+
+	case POST_RATE_CHANGE:
+		clocksource_register_hz(&cs->clksrc, ndata->new_rate);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int __init sun5i_setup_clocksource(struct device_node *node,
 					  void __iomem *base,
 					  struct clk *clk, int irq)
@@ -174,6 +202,14 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 
 	cs->timer.base = base;
 	cs->timer.clk = clk;
+	cs->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clksrc;
+	cs->timer.clk_rate_cb.next = NULL;
+
+	ret = clk_notifier_register(clk, &cs->timer.clk_rate_cb);
+	if (ret) {
+		pr_err("Unable to register clock notifier.\n");
+		goto err_disable_clk;
+	}
 
 	writel(~0, base + TIMER_INTVAL_LO_REG(1));
 	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
@@ -188,11 +224,13 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 	ret = clocksource_register_hz(&cs->clksrc, rate);
 	if (ret) {
 		pr_err("Couldn't register clock source.\n");
-		goto err_disable_clk;
+		goto err_remove_notifier;
 	}
 
 	return 0;
 
+err_remove_notifier:
+	clk_notifier_unregister(clk, &cs->timer.clk_rate_cb);
 err_disable_clk:
 	clk_disable_unprepare(clk);
 err_free:
@@ -200,6 +238,26 @@ err_free:
 	return ret;
 }
 
+static int sun5i_rate_cb_clkevt(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct sun5i_timer *timer = to_sun5i_timer(nb);
+	struct sun5i_timer_clkevt *ce = container_of(timer,
+						     struct sun5i_timer_clkevt, timer);
+	unsigned long flags;
+
+	if (event == POST_RATE_CHANGE) {
+		local_irq_save(flags);
+		clockevents_update_freq(&ce->clkevt, ndata->new_rate);
+		local_irq_restore(flags);
+
+		ce->timer.ticks_per_jiffy = DIV_ROUND_UP(ndata->new_rate, HZ);
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem *base,
 					 struct clk *clk, int irq)
 {
@@ -223,6 +281,14 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	ce->timer.base = base;
 	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 	ce->timer.clk = clk;
+	ce->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clkevt;
+	ce->timer.clk_rate_cb.next = NULL;
+
+	ret = clk_notifier_register(clk, &ce->timer.clk_rate_cb);
+	if (ret) {
+		pr_err("Unable to register clock notifier.\n");
+		goto err_disable_clk;
+	}
 
 	ce->clkevt.name = node->name;
 	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
@@ -240,7 +306,7 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 			  "sun5i_timer0", ce);
 	if (ret) {
 		pr_err("Unable to register interrupt\n");
-		goto err_disable_clk;
+		goto err_remove_notifier;
 	}
 
 	clockevents_config_and_register(&ce->clkevt, rate,
@@ -248,6 +314,8 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 
 	return 0;
 
+err_remove_notifier:
+	clk_notifier_unregister(clk, &ce->timer.clk_rate_cb);
 err_disable_clk:
 	clk_disable_unprepare(clk);
 err_free:
-- 
2.2.2


  parent reply	other threads:[~2015-01-26  9:56 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-26  9:50 [PATCH v2 0/5] clocksource: sun5i: Support parent clock rate changes Maxime Ripard
2015-01-26  9:50 ` [PATCH v2 1/5] clocksource: sun5i: Switch to request_irq Maxime Ripard
2015-01-26  9:50 ` [PATCH v2 2/5] clocksource: sun5i: Use of_io_request_and_map Maxime Ripard
2015-01-26  9:50 ` [PATCH v2 3/5] clocksource: sun5i: Remove sched_clock Maxime Ripard
2015-01-26  9:50 ` [PATCH v2 4/5] clocksource: sun5i: Refactor the current code Maxime Ripard
2015-01-26  9:50 ` Maxime Ripard [this message]
2015-01-26 11:22   ` [PATCH v2 5/5] clocksource: sun5i: Add clock notifiers Daniel Lezcano
2015-01-26 14:35     ` Maxime Ripard
2015-03-03  8:52       ` Maxime Ripard
2015-03-03 11:16         ` Daniel Lezcano
2015-03-04  9:32           ` Maxime Ripard
2015-03-04 11:43             ` Daniel Lezcano
2015-03-04 20:36       ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422265856-27631-6-git-send-email-maxime.ripard@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH v2 5/5] clocksource: sun5i: Add clock notifiers' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).