From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754238AbbA2PAc (ORCPT ); Thu, 29 Jan 2015 10:00:32 -0500 Received: from bhuna.collabora.co.uk ([93.93.135.160]:47382 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754030AbbA2PA3 (ORCPT ); Thu, 29 Jan 2015 10:00:29 -0500 From: Javier Martinez Canillas To: Ulf Hansson Cc: Kukjin Kim , Doug Anderson , Olof Johansson , Arend van Spriel , Srinivas Kandagatla , linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH v3 3/6] mmc: pwrseq: Document optional clock for the simple power sequence Date: Thu, 29 Jan 2015 16:00:05 +0100 Message-Id: <1422543608-24704-4-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.1.3 In-Reply-To: <1422543608-24704-1-git-send-email-javier.martinez@collabora.co.uk> References: <1422543608-24704-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Some WLAN chips attached to a SDIO interface, need an external clock to be operational. Since this is very common, extend the simple MMC power sequence DT binding to support an optional clock. Signed-off-by: Javier Martinez Canillas --- Changes since v2: None. Changes since v1: None. --- Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt index eaae652213ae..a462c50f19a8 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -12,6 +12,10 @@ Optional properties: at initialization and prior we start the power up procedure of the card. They will be de-asserted right after the power has been provided to the card. +- clocks : Must contain an entry for the entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entry: + "ext_clock" (External clock provided to the card). Example: -- 2.1.3