LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Eddie Huang <eddie.huang@mediatek.com>,
	Yingjoe Chen <Yingjoe.Chen@mediatek.com>,
	Henry Chen <henryc.chen@mediatek.com>,
	YH Chen <yh.chen@mediatek.com>,
	kernel@pengutronix.de, linux-mediatek@lists.infradead.org,
	Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH 2/2] dt-bindings: ARM: Mediatek: document binding for the PMIC wrapper
Date: Sun, 22 Feb 2015 13:02:47 +0100	[thread overview]
Message-ID: <1424606567-29708-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1424606567-29708-1-git-send-email-s.hauer@pengutronix.de>

This adds documentation for the PMIC wrapper unit found on Mediatek
MT8135 and MT8173 SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/soc/mediatek/pwrap.txt     | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/pwrap.txt

diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
new file mode 100644
index 0000000..66cc528
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -0,0 +1,56 @@
+MediaTek PMIC Wrapper Driver
+
+This document describes the binding for the MediaTek PMIC wrapper.
+
+On MediaTek MT8135, MT8173 and other SoCs the PMIC is connected via
+SPI. The SPI master interface is not directly visible to the CPU, but
+only through the PMIC wrapper inside the SoC. The communication between
+the SoC and the PMIC can optionally be encrypted. Also a non standard
+Dual IO SPI mode can be used to increase speed.
+
+IP Pairing
+
+on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+The signals of these pins are routed over the SPI bus using the pwrap
+bridge. In the binding description below the properties needed for bridging
+are marked with "IP Pairing". These are optional on SoCs which do not support
+IP Pairing
+
+Required properties in pwrap device node.
+- compatible: "mediatek,mt8135-pwrap" or "mediatek,mt8173-pwrap"
+- interrupts: IRQ for pwrap in SOC
+- reg-names: Must include the following entries:
+  "pwrap": Main registers base
+  "pwrap-bridge": bridge base (IP Pairing)
+- reg: Must contain an entry for each entry in reg-names.
+- reset-names: Must include the following entries:
+  "pwrap"
+  "pwrap-bridge" (IP Pairing)
+- resets: Must contain an entry for each entry in reset-names.
+- clock-names: Must include the following entries:
+  "spi": SPI bus clock
+  "wrap": Main module clock
+- clocks: Must contain an entry for each entry in clock-names.
+
+Optional properities:
+- pmic: Mediatek PMIC MFD is the child device of pwrap
+  See the following for child node definitions:
+  Documentation/devicetree/bindings/mfd/mt6397.txt
+
+Example:
+	pwrap: pwrap@1000f000 {
+		compatible = "mediatek,mt8135-pwrap";
+		reg = <0 0x1000f000 0 0x1000>,
+			<0 0x11017000 0 0x1000>;
+		reg-names = "pwrap", "pwrap-bridge";
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+				<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+		reset-names = "pwrap", "pwrap-bridge";
+		clocks = <&clk26m>, <&clk26m>;
+		clock-names = "spi", "wrap";
+
+		pmic {
+			compatible = "mediatek,mt6397";
+		};
+	};
-- 
2.1.4


  parent reply	other threads:[~2015-02-22 12:03 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-22 12:02 [PATCH] Mediatek PMIC wrapper support Sascha Hauer
2015-02-22 12:02 ` [PATCH 1/2] soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs Sascha Hauer
2015-03-09  8:53   ` Matthias Brugger
2015-03-09 10:38     ` Sascha Hauer
     [not found]       ` <1425986519.28516.59.camel@mtksdaap41>
2015-03-10 12:07         ` Sascha Hauer
2015-02-22 12:02 ` Sascha Hauer [this message]
2015-03-09  5:37 ` [PATCH] Mediatek PMIC wrapper support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424606567-29708-3-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=Yingjoe.Chen@mediatek.com \
    --cc=eddie.huang@mediatek.com \
    --cc=henryc.chen@mediatek.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=yh.chen@mediatek.com \
    --subject='Re: [PATCH 2/2] dt-bindings: ARM: Mediatek: document binding for the PMIC wrapper' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).