LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Peter Hung <hpeter@gmail.com>
To: johan@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw,
	peter_hong@fintek.com.tw, hpeter@gmail.com,
	Peter Hung <hpeter+linux_kernel@gmail.com>
Subject: [PATCH V8 05/10] USB: f81232: implement MCR/MSR function
Date: Thu, 26 Feb 2015 18:02:11 +0800	[thread overview]
Message-ID: <1424944936-7117-6-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
In-Reply-To: <1424944936-7117-1-git-send-email-hpeter+linux_kernel@gmail.com>

This patch implement relative MCR/MSR function, such like
tiocmget()/tiocmset()/dtr_rts()/carrier_raised()

original f81232_carrier_raised() compared with wrong value UART_DCD.
It's should compared with UART_MSR_DCD.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
---
 drivers/usb/serial/f81232.c | 139 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 117 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 46a81ef..b70f9b9 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -34,8 +34,10 @@ MODULE_DEVICE_TABLE(usb, id_table);
 /* USB Control EP parameter */
 #define F81232_REGISTER_REQUEST	0xa0
 #define F81232_GET_REGISTER	0xc0
+#define F81232_SET_REGISTER	0x40
 
 #define SERIAL_BASE_ADDRESS	0x0120
+#define MODEM_CONTROL_REGISTER	(0x04 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER	(0x06 + SERIAL_BASE_ADDRESS)
 
 #define CONTROL_DTR			0x01
@@ -54,7 +56,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct f81232_private {
 	struct mutex lock;
-	u8 line_control;
+	u8 modem_control;
 	u8 modem_status;
 	struct work_struct interrupt_work;
 	struct usb_serial_port *port;
@@ -95,6 +97,42 @@ static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
 	return status;
 }
 
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
+{
+	int status;
+	u8 *tmp;
+	struct usb_device *dev = port->serial->dev;
+
+	tmp = kmalloc(sizeof(val), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	*tmp = val;
+
+	status = usb_control_msg(dev,
+				usb_sndctrlpipe(dev, 0),
+				F81232_REGISTER_REQUEST,
+				F81232_SET_REGISTER,
+				reg,
+				0,
+				tmp,
+				sizeof(u8),
+				USB_CTRL_SET_TIMEOUT);
+	if (status != sizeof(val)) {
+		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+		if (status == 0)
+			status = -EIO;
+		else
+			status = usb_translate_errors(status);
+	} else {
+		status = 0;
+	}
+
+	kfree(tmp);
+	return status;
+}
+
 static void f81232_read_msr(struct usb_serial_port *port)
 {
 	int status;
@@ -139,6 +177,51 @@ static void f81232_read_msr(struct usb_serial_port *port)
 	mutex_unlock(&priv->lock);
 }
 
+static int f81232_set_mctrl(struct usb_serial_port *port,
+					   unsigned int set, unsigned int clear)
+{
+	u8 urb_value;
+	int status;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+		return 0;	/* no change */
+
+	/* 'set' takes precedence over 'clear' */
+	clear &= ~set;
+
+	/* force enable interrupt with OUT2 */
+	mutex_lock(&priv->lock);
+	urb_value = UART_MCR_OUT2 | priv->modem_control;
+
+	if (clear & TIOCM_DTR)
+		urb_value &= ~UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		urb_value &= ~UART_MCR_RTS;
+
+	if (set & TIOCM_DTR)
+		urb_value |= UART_MCR_DTR;
+
+	if (set & TIOCM_RTS)
+		urb_value |= UART_MCR_RTS;
+
+	dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+			urb_value, priv->modem_control);
+
+	status = f81232_set_register(port, MODEM_CONTROL_REGISTER, urb_value);
+	if (status) {
+		dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+		mutex_unlock(&priv->lock);
+		return status;
+	}
+
+	priv->modem_control = urb_value;
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
 static void f81232_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
 				      size_t actual_length)
@@ -250,12 +333,6 @@ static void f81232_process_read_urb(struct urb *urb)
 	tty_flip_buffer_push(&port->port);
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
-{
-	/* FIXME - Stubbed out for now */
-	return 0;
-}
-
 static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 {
 	/* FIXME - Stubbed out for now */
@@ -283,15 +360,35 @@ static void f81232_set_termios(struct tty_struct *tty,
 
 static int f81232_tiocmget(struct tty_struct *tty)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	int r;
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+	u8 mcr, msr;
+
+	/* force get current MSR changed state */
+	f81232_read_msr(port);
+
+	mutex_lock(&port_priv->lock);
+	mcr = port_priv->modem_control;
+	msr = port_priv->modem_status;
+	mutex_unlock(&port_priv->lock);
+
+	r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+		(mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+		(msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+		(msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+		(msr & UART_MSR_RI ? TIOCM_RI : 0) |
+		(msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+	return r;
 }
 
 static int f81232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	struct usb_serial_port *port = tty->driver_data;
+
+	return f81232_set_mctrl(port, set, clear);
 }
 
 static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -326,24 +423,22 @@ static void f81232_close(struct usb_serial_port *port)
 
 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 {
-	struct f81232_private *priv = usb_get_serial_port_data(port);
-	u8 control;
-
-	mutex_lock(&priv->lock);
-	/* Change DTR and RTS */
 	if (on)
-		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
 	else
-		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	control = priv->line_control;
-	mutex_unlock(&priv->lock);
-	set_control_lines(port->serial->dev, control);
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
 }
 
 static int f81232_carrier_raised(struct usb_serial_port *port)
 {
+	u8 msr;
 	struct f81232_private *priv = usb_get_serial_port_data(port);
-	if (priv->modem_status & UART_DCD)
+
+	mutex_lock(&priv->lock);
+	msr = priv->modem_status;
+	mutex_unlock(&priv->lock);
+
+	if (msr & UART_MSR_DCD)
 		return 1;
 	return 0;
 }
-- 
1.9.1


  parent reply	other threads:[~2015-02-26 10:05 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-26 10:02 [PATCH V8 00/10] USB: f81232: V8 patches Peter Hung
2015-02-26 10:02 ` [PATCH V8 01/10] USB: f81232: rename private struct member name Peter Hung
2015-02-26 10:02 ` [PATCH V8 02/10] USB: f81232: implement RX bulk-in EP Peter Hung
2015-03-14 11:48   ` Johan Hovold
2015-03-16  2:53     ` Peter Hung
2015-03-16  8:52       ` Johan Hovold
2015-03-16  9:15         ` Peter Hung
2015-02-26 10:02 ` [PATCH V8 03/10] USB: f81232: change lock mechanism Peter Hung
2015-02-26 10:02 ` [PATCH V8 04/10] USB: f81232: implement read IIR/MSR with endpoint Peter Hung
2015-03-14 12:02   ` Johan Hovold
2015-03-16  3:08     ` Peter Hung
2015-03-16  8:55       ` Johan Hovold
2015-03-16  9:18         ` Peter Hung
2015-02-26 10:02 ` Peter Hung [this message]
2015-03-14 12:09   ` [PATCH V8 05/10] USB: f81232: implement MCR/MSR function Johan Hovold
2015-02-26 10:02 ` [PATCH V8 06/10] USB: f81232: implement port enable/disable method Peter Hung
2015-02-26 10:02 ` [PATCH V8 07/10] USB: f81232: implement set_termios() Peter Hung
2015-03-14 12:24   ` Johan Hovold
2015-02-26 10:02 ` [PATCH V8 08/10] USB: f81232: clarify f81232_ioctl() and fix Peter Hung
2015-03-14 12:27   ` Johan Hovold
2015-02-26 10:02 ` [PATCH V8 09/10] USB: f81232: cleanup non-used define Peter Hung
2015-02-26 10:02 ` [PATCH V8 10/10] USB: f81232: modify/add author Peter Hung
2015-03-05  5:59 ` [PATCH V8 00/10] USB: f81232: V8 patches Peter Hung
2015-03-05  7:03   ` Johan Hovold
2015-03-14 12:30     ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424944936-7117-6-git-send-email-hpeter+linux_kernel@gmail.com \
    --to=hpeter@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hpeter+linux_kernel@gmail.com \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter_hong@fintek.com.tw \
    --cc=tom_tsai@fintek.com.tw \
    --subject='Re: [PATCH V8 05/10] USB: f81232: implement MCR/MSR function' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).