LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: linux-leds@vger.kernel.org, linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	kyungmin.park@samsung.com, pavel@ucw.cz, cooloney@gmail.com,
	rpurdie@rpsys.net, sakari.ailus@iki.fi, s.nawrocki@samsung.com,
	Jacek Anaszewski <j.anaszewski@samsung.com>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Lee Jones <lee.jones@linaro.org>,
	Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH/RFC v12 09/19] leds: Add support for max77693 mfd flash cell
Date: Wed, 04 Mar 2015 17:14:30 +0100	[thread overview]
Message-ID: <1425485680-8417-10-git-send-email-j.anaszewski@samsung.com> (raw)
In-Reply-To: <1425485680-8417-1-git-send-email-j.anaszewski@samsung.com>

This patch adds led-flash support to Maxim max77693 chipset.
A device can be exposed to user space through LED subsystem
sysfs interface. Device supports up to two leds which can
work in flash and torch mode. The leds can be triggered
externally or by software.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/leds/Kconfig         |   10 +
 drivers/leds/Makefile        |    1 +
 drivers/leds/leds-max77693.c |  993 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1004 insertions(+)
 create mode 100644 drivers/leds/leds-max77693.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 25b320d..ccef436 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -467,6 +467,16 @@ config LEDS_TCA6507
 	  LED driver chips accessed via the I2C bus.
 	  Driver support brightness control and hardware-assisted blinking.
 
+config LEDS_MAX77693
+	tristate "LED support for MAX77693 Flash"
+	depends on LEDS_CLASS_FLASH
+	depends on MFD_MAX77693
+	depends on OF
+	help
+	  This option enables support for the flash part of the MAX77693
+	  multifunction device. It has build in control for two leds in flash
+	  and torch mode.
+
 config LEDS_MAX8997
 	tristate "LED support for MAX8997 PMIC"
 	depends on LEDS_CLASS && MFD_MAX8997
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index cbba921..57ca62b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
+obj-$(CONFIG_LEDS_MAX77693)		+= leds-max77693.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
new file mode 100644
index 0000000..a811d04
--- /dev/null
+++ b/drivers/leds/leds-max77693.c
@@ -0,0 +1,993 @@
+/*
+ * LED Flash class driver for the flash cell of max77693 mfd.
+ *
+ *	Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ *
+ *	Authors: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *		 Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <asm/div64.h>
+#include <linux/led-class-flash.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-private.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define MODE_OFF		0
+#define MODE_FLASH(a)		(1 << (a))
+#define MODE_TORCH(a)		(1 << (2 + (a)))
+#define MODE_FLASH_EXTERNAL(a)	(1 << (4 + (a)))
+
+#define MODE_FLASH_MASK		(MODE_FLASH(FLED1) | MODE_FLASH(FLED2) | \
+				 MODE_FLASH_EXTERNAL(FLED1) | \
+				 MODE_FLASH_EXTERNAL(FLED2))
+#define MODE_TORCH_MASK		(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))
+
+#define FLED1_IOUT		(1 << 0)
+#define FLED2_IOUT		(1 << 1)
+
+enum max77693_fled {
+	FLED1,
+	FLED2,
+};
+
+enum max77693_led_mode {
+	FLASH,
+	TORCH,
+};
+
+struct max77693_led_config_data {
+	const char *label[2];
+	u32 iout_torch_max[2];
+	u32 iout_flash_max[2];
+	u32 flash_timeout[2];
+	u32 num_leds;
+	u32 boost_mode;
+	u32 boost_vout;
+	u32 low_vsys;
+	u32 trigger_type;
+};
+
+struct max77693_sub_led {
+	/* related FLED output identifier */
+	int fled_id;
+	/* related LED Flash class device */
+	struct led_classdev_flash fled_cdev;
+	/* assures led-triggers compatibility */
+	struct work_struct work_brightness_set;
+
+	/* brightness cache */
+	unsigned int torch_brightness;
+	/* flash timeout cache */
+	unsigned int flash_timeout;
+	/* flash faults that may have occurred */
+	u32 flash_faults;
+};
+
+struct max77693_led_device {
+	/* parent mfd regmap */
+	struct regmap *regmap;
+	/* platform device data */
+	struct platform_device *pdev;
+	/* secures access to the device */
+	struct mutex lock;
+
+	/* sub led data */
+	struct max77693_sub_led sub_leds[2];
+
+	/* maximum torch current values for FLED outputs */
+	u32 iout_torch_max[2];
+	/* maximum flash current values for FLED outputs */
+	u32 iout_flash_max[2];
+	/* flash trigger type */
+	u32 trigger_type;
+
+	/* current flash timeout cache */
+	unsigned int current_flash_timeout;
+	/* ITORCH register cache */
+	u8 torch_iout_reg;
+	/* mode of fled outputs */
+	unsigned int mode_flags;
+	/* recently strobed fled */
+	int strobing_sub_led_id;
+	/* bitmask of fled outputs use state (bit 0. - FLED1, bit 1. - FLED2) */
+	u8 fled_mask;
+	/* FLED modes that can be set */
+	u8 allowed_modes;
+
+	/* arrangement of current outputs */
+	bool iout_joint;
+};
+
+struct max77693_led_settings {
+	struct led_flash_setting torch_brightness;
+	struct led_flash_setting flash_brightness;
+	struct led_flash_setting flash_timeout;
+};
+
+static u8 max77693_led_iout_to_reg(u32 ua)
+{
+	if (ua < FLASH_IOUT_MIN)
+		ua = FLASH_IOUT_MIN;
+	return (ua - FLASH_IOUT_MIN) / FLASH_IOUT_STEP;
+}
+
+static u8 max77693_flash_timeout_to_reg(u32 us)
+{
+	return (us - FLASH_TIMEOUT_MIN) / FLASH_TIMEOUT_STEP;
+}
+
+static inline struct max77693_sub_led *flcdev_to_sub_led(
+					struct led_classdev_flash *fled_cdev)
+{
+	return container_of(fled_cdev, struct max77693_sub_led, fled_cdev);
+}
+
+static inline struct max77693_led_device *sub_led_to_led(
+					struct max77693_sub_led *sub_led)
+{
+	return container_of(sub_led, struct max77693_led_device,
+				sub_leds[sub_led->fled_id]);
+}
+
+static inline u8 max77693_led_vsys_to_reg(u32 mv)
+{
+	return ((mv - MAX_FLASH1_VSYS_MIN) / MAX_FLASH1_VSYS_STEP) << 2;
+}
+
+static inline u8 max77693_led_vout_to_reg(u32 mv)
+{
+	return (mv - FLASH_VOUT_MIN) / FLASH_VOUT_STEP + FLASH_VOUT_RMIN;
+}
+
+static inline bool max77693_fled_used(struct max77693_led_device *led,
+					 int fled_id)
+{
+	u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
+
+	return led->fled_mask & fled_bit;
+}
+
+static int max77693_set_mode_reg(struct max77693_led_device *led, u8 mode)
+{
+	struct regmap *rmap = led->regmap;
+	int ret, v = 0, i;
+
+	for (i = FLED1; i <= FLED2; ++i) {
+		if (mode & MODE_TORCH(i))
+			v |= FLASH_EN_ON << TORCH_EN_SHIFT(i);
+
+		if (mode & MODE_FLASH(i)) {
+			v |= FLASH_EN_ON << FLASH_EN_SHIFT(i);
+		} else if (mode & MODE_FLASH_EXTERNAL(i)) {
+			v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(i);
+			/*
+			 * Enable hw triggering also for torch mode, as some
+			 * camera sensors use torch led to fathom ambient light
+			 * conditions before strobing the flash.
+			 */
+			v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(i);
+		}
+	}
+
+	/* Reset the register only prior setting flash modes */
+	if (mode & ~(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))) {
+		ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, v);
+}
+
+static int max77693_add_mode(struct max77693_led_device *led, u8 mode)
+{
+	int i, ret;
+
+	mode &= led->allowed_modes;
+
+	/*
+	 * Torch mode once enabled remains active until turned off. If the FLED2
+	 * output isn't to be disabled check if the torch mode to be set isn't
+	 * already activated and avoid re-setting it.
+	 */
+	if ((!(mode ^ led->mode_flags)) & MODE_TORCH(FLED2)) {
+		for (i = FLED1; i <= FLED2; ++i)
+			if ((mode & led->mode_flags & MODE_TORCH(i)))
+				return 0;
+	}
+
+	if (led->iout_joint)
+		/* Span the mode on FLED2 for joint iouts case */
+		mode |= (mode << 1);
+
+	/*
+	 * FLASH_EXTERNAL mode activates FLASHEN and TORCHEN pins in the device.
+	 * The related register bits fields interfere with SW triggerred modes,
+	 * thus clear them to ensure proper device configuration.
+	 */
+	for (i = FLED1; i <= FLED2; ++i)
+		if (mode & MODE_FLASH_EXTERNAL(i))
+			led->mode_flags &= (~MODE_TORCH(i) & ~MODE_FLASH(i));
+
+	led->mode_flags |= mode;
+	led->mode_flags &= led->allowed_modes;
+
+	ret = max77693_set_mode_reg(led, led->mode_flags);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Clear flash mode flag after setting the mode to avoid spurious flash
+	 * strobing on each subsequent torch mode setting.
+	 */
+	if (mode & MODE_FLASH_MASK)
+		led->mode_flags &= ~mode;
+
+	return ret;
+}
+
+static int max77693_clear_mode(struct max77693_led_device *led,
+				u8 mode)
+{
+	if (led->iout_joint)
+		/* Clear mode also on FLED2 for joint iouts case */
+		mode |= (mode << 1);
+
+	led->mode_flags &= ~mode;
+
+	return max77693_set_mode_reg(led, led->mode_flags);
+}
+
+static void max77693_add_allowed_modes(struct max77693_led_device *led,
+				int fled_id, enum max77693_led_mode mode)
+{
+	if (mode == FLASH)
+		led->allowed_modes |= (MODE_FLASH(fled_id) |
+				       MODE_FLASH_EXTERNAL(fled_id));
+	else
+		led->allowed_modes |= MODE_TORCH(fled_id);
+}
+
+static void max77693_distribute_currents(struct max77693_led_device *led,
+				int fled_id, enum max77693_led_mode mode,
+				u32 micro_amp, u32 iout_max[2], u32 iout[2])
+{
+	if (!led->iout_joint) {
+		iout[fled_id] = micro_amp;
+		max77693_add_allowed_modes(led, fled_id, mode);
+		return;
+	}
+
+	iout[FLED1] = min(micro_amp, iout_max[FLED1]);
+	iout[FLED2] = micro_amp - iout[FLED1];
+
+	if (mode == FLASH)
+		led->allowed_modes &= ~MODE_FLASH_MASK;
+	else
+		led->allowed_modes &= ~MODE_TORCH_MASK;
+
+	max77693_add_allowed_modes(led, FLED1, mode);
+
+	if (iout[FLED2])
+		max77693_add_allowed_modes(led, FLED2, mode);
+}
+
+static int max77693_set_torch_current(struct max77693_led_device *led,
+				int fled_id, u32 micro_amp)
+{
+	struct regmap *rmap = led->regmap;
+	u8 iout1_reg = 0, iout2_reg = 0;
+	u32 iout[2];
+
+	max77693_distribute_currents(led, fled_id, TORCH, micro_amp,
+					led->iout_torch_max, iout);
+
+	if (fled_id == FLED1 || led->iout_joint) {
+		iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
+		led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT2_SHIFT);
+	}
+	if (fled_id == FLED2 || led->iout_joint) {
+		iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
+		led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT1_SHIFT);
+	}
+
+	led->torch_iout_reg |= ((iout1_reg << TORCH_IOUT1_SHIFT) |
+				(iout2_reg << TORCH_IOUT2_SHIFT));
+
+	return regmap_write(rmap, MAX77693_LED_REG_ITORCH,
+						led->torch_iout_reg);
+}
+
+static int max77693_set_flash_current(struct max77693_led_device *led,
+					int fled_id,
+					u32 micro_amp)
+{
+	struct regmap *rmap = led->regmap;
+	u8 iout1_reg, iout2_reg;
+	u32 iout[2];
+	int ret = -EINVAL;
+
+	max77693_distribute_currents(led, fled_id, FLASH, micro_amp,
+					led->iout_flash_max, iout);
+
+	if (fled_id == FLED1 || led->iout_joint) {
+		iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
+		ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH1,
+							iout1_reg);
+		if (ret < 0)
+			return ret;
+	}
+	if (fled_id == FLED2 || led->iout_joint) {
+		iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
+		ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH2,
+							iout2_reg);
+	}
+
+	return ret;
+}
+
+static int max77693_set_timeout(struct max77693_led_device *led, u32 microsec)
+{
+	struct regmap *rmap = led->regmap;
+	u8 v;
+	int ret;
+
+	v = max77693_flash_timeout_to_reg(microsec);
+
+	if (led->trigger_type == MAX77693_LED_TRIG_TYPE_LEVEL)
+		v |= FLASH_TMR_LEVEL;
+
+	ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_TIMER, v);
+	if (ret < 0)
+		return ret;
+
+	led->current_flash_timeout = microsec;
+
+	return 0;
+}
+
+static int max77693_get_strobe_status(struct max77693_led_device *led,
+					bool *state)
+{
+	struct regmap *rmap = led->regmap;
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_STATUS, &v);
+	if (ret < 0)
+		return ret;
+
+	*state = v & FLASH_STATUS_FLASH_ON;
+
+	return ret;
+}
+
+static int max77693_get_flash_faults(struct max77693_sub_led *sub_led)
+{
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	struct regmap *rmap = led->regmap;
+	unsigned int v;
+	u8 fault_open_mask, fault_short_mask;
+	int ret;
+
+	sub_led->flash_faults = 0;
+
+	if (led->iout_joint) {
+		fault_open_mask = FLASH_INT_FLED1_OPEN | FLASH_INT_FLED2_OPEN;
+		fault_short_mask = FLASH_INT_FLED1_SHORT |
+							FLASH_INT_FLED2_SHORT;
+	} else {
+		fault_open_mask = (sub_led->fled_id == FLED1) ?
+						FLASH_INT_FLED1_OPEN :
+						FLASH_INT_FLED2_OPEN;
+		fault_short_mask = (sub_led->fled_id == FLED1) ?
+						FLASH_INT_FLED1_SHORT :
+						FLASH_INT_FLED2_SHORT;
+	}
+
+	ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_INT, &v);
+	if (ret < 0)
+		return ret;
+
+	if (v & fault_open_mask)
+		sub_led->flash_faults |= LED_FAULT_OVER_VOLTAGE;
+	if (v & fault_short_mask)
+		sub_led->flash_faults |= LED_FAULT_SHORT_CIRCUIT;
+	if (v & FLASH_INT_OVER_CURRENT)
+		sub_led->flash_faults |= LED_FAULT_OVER_CURRENT;
+
+	return 0;
+}
+
+static int max77693_setup(struct max77693_led_device *led,
+			 struct max77693_led_config_data *cfg)
+{
+	struct regmap *rmap = led->regmap;
+	int i, first_led, last_led, ret;
+	u32 max_flash_curr[2];
+	u8 v;
+
+	/*
+	 * Initialize only flash current. Torch current doesn't
+	 * require initialization as ITORCH register is written with
+	 * new value each time brightness_set op is called.
+	 */
+	if (led->iout_joint) {
+		first_led = FLED1;
+		last_led = FLED1;
+		max_flash_curr[FLED1] = cfg->iout_flash_max[FLED1] +
+					cfg->iout_flash_max[FLED2];
+	} else {
+		first_led = max77693_fled_used(led, FLED1) ? FLED1 : FLED2;
+		last_led = max77693_fled_used(led, FLED2) ? FLED2 : FLED1;
+		max_flash_curr[FLED1] = cfg->iout_flash_max[FLED1];
+		max_flash_curr[FLED2] = cfg->iout_flash_max[FLED2];
+	}
+
+	for (i = first_led; i <= last_led; ++i) {
+		ret = max77693_set_flash_current(led, i,
+					max_flash_curr[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	v = TORCH_TMR_NO_TIMER | MAX77693_LED_TRIG_TYPE_LEVEL;
+	ret = regmap_write(rmap, MAX77693_LED_REG_ITORCHTIMER, v);
+	if (ret < 0)
+		return ret;
+
+	/* initially set FLED1 timeout */
+	ret = max77693_set_timeout(led, cfg->flash_timeout[FLED1]);
+	if (ret < 0)
+		return ret;
+
+	if (cfg->low_vsys > 0)
+		v = max77693_led_vsys_to_reg(cfg->low_vsys) |
+						MAX_FLASH1_MAX_FL_EN;
+	else
+		v = 0;
+
+	ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH1, v);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH2, 0);
+	if (ret < 0)
+		return ret;
+
+	if (cfg->boost_mode == MAX77693_LED_BOOST_FIXED)
+		v = FLASH_BOOST_FIXED;
+	else
+		v = cfg->boost_mode | cfg->boost_mode << 1;
+
+	if (max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
+		v |= FLASH_BOOST_LEDNUM_2;
+
+	ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_CNTL, v);
+	if (ret < 0)
+		return ret;
+
+	v = max77693_led_vout_to_reg(cfg->boost_vout);
+	ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_FLASH1, v);
+	if (ret < 0)
+		return ret;
+
+	return max77693_set_mode_reg(led, MODE_OFF);
+}
+
+static int __max77693_led_brightness_set(struct max77693_led_device *led,
+					int fled_id, enum led_brightness value)
+{
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	if (value == 0) {
+		ret = max77693_clear_mode(led, MODE_TORCH(fled_id));
+		if (ret < 0)
+			dev_dbg(&led->pdev->dev,
+				"Failed to clear torch mode (%d)\n",
+				ret);
+		goto unlock;
+	}
+
+	ret = max77693_set_torch_current(led, fled_id, value * TORCH_IOUT_STEP);
+	if (ret < 0) {
+		dev_dbg(&led->pdev->dev,
+			"Failed to set torch current (%d)\n",
+			ret);
+		goto unlock;
+	}
+
+	ret = max77693_add_mode(led, MODE_TORCH(fled_id));
+	if (ret < 0)
+		dev_dbg(&led->pdev->dev,
+			"Failed to set torch mode (%d)\n",
+			ret);
+unlock:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static void max77693_led_brightness_set_work(
+					struct work_struct *work)
+{
+	struct max77693_sub_led *sub_led =
+			container_of(work, struct max77693_sub_led,
+					work_brightness_set);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+	__max77693_led_brightness_set(led, sub_led->fled_id,
+				sub_led->torch_brightness);
+}
+
+/* LED subsystem callbacks */
+
+static int max77693_led_brightness_set_sync(
+				struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+	return __max77693_led_brightness_set(led, sub_led->fled_id, value);
+}
+
+static void max77693_led_brightness_set(
+				struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+
+	sub_led->torch_brightness = value;
+	schedule_work(&sub_led->work_brightness_set);
+}
+
+static int max77693_led_flash_brightness_set(
+				struct led_classdev_flash *fled_cdev,
+				u32 brightness)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int ret;
+
+	mutex_lock(&led->lock);
+	ret = max77693_set_flash_current(led, sub_led->fled_id, brightness);
+	mutex_unlock(&led->lock);
+
+	return ret;
+}
+
+static int max77693_led_flash_strobe_set(
+				struct led_classdev_flash *fled_cdev,
+				bool state)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int fled_id = sub_led->fled_id;
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	if (!state) {
+		ret = max77693_clear_mode(led, MODE_FLASH(fled_id));
+		goto unlock;
+	}
+
+	if (sub_led->flash_timeout != led->current_flash_timeout) {
+		ret = max77693_set_timeout(led, sub_led->flash_timeout);
+		if (ret < 0)
+			goto unlock;
+	}
+
+	led->strobing_sub_led_id = fled_id;
+
+	ret = max77693_add_mode(led, MODE_FLASH(fled_id));
+	if (ret < 0)
+		goto unlock;
+
+	ret = max77693_get_flash_faults(sub_led);
+
+unlock:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int max77693_led_flash_fault_get(
+				struct led_classdev_flash *fled_cdev,
+				u32 *fault)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+
+	*fault = sub_led->flash_faults;
+
+	return 0;
+}
+
+static int max77693_led_flash_strobe_get(
+				struct led_classdev_flash *fled_cdev,
+				bool *state)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int ret;
+
+	if (!state)
+		return -EINVAL;
+
+	mutex_lock(&led->lock);
+
+	ret = max77693_get_strobe_status(led, state);
+
+	*state = !!(*state && (led->strobing_sub_led_id == sub_led->fled_id));
+
+	mutex_unlock(&led->lock);
+
+	return ret;
+}
+
+static int max77693_led_flash_timeout_set(
+				struct led_classdev_flash *fled_cdev,
+				u32 timeout)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+	mutex_lock(&led->lock);
+	sub_led->flash_timeout = timeout;
+	mutex_unlock(&led->lock);
+
+	return 0;
+}
+
+static int max77693_led_parse_dt(struct max77693_led_device *led,
+				struct max77693_led_config_data *cfg)
+{
+	struct device *dev = &led->pdev->dev;
+	struct max77693_sub_led *sub_leds = led->sub_leds;
+	struct device_node *node = dev->of_node, *child_node;
+	struct property *prop;
+	u32 led_sources[2];
+	int i, fled_id, ret;
+
+	of_property_read_u32(node, "maxim,trigger-type", &cfg->trigger_type);
+	of_property_read_u32(node, "maxim,boost-mode", &cfg->boost_mode);
+	of_property_read_u32(node, "maxim,boost-mvout", &cfg->boost_vout);
+	of_property_read_u32(node, "maxim,mvsys-min", &cfg->low_vsys);
+
+	for_each_available_child_of_node(node, child_node) {
+		prop = of_find_property(child_node, "led-sources", NULL);
+		if (prop) {
+			const __be32 *srcs = NULL;
+
+			for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
+				srcs = of_prop_next_u32(prop, srcs,
+							&led_sources[i]);
+				if (!srcs)
+					break;
+			}
+		} else {
+			dev_err(dev,
+				"\"led-sources\" DT property not found.\n");
+			return -EINVAL;
+		}
+
+		if (i == 2) {
+			fled_id = FLED1;
+			led->fled_mask = FLED1_IOUT | FLED2_IOUT;
+		} else if (led_sources[0] == FLED1) {
+			fled_id = FLED1;
+			led->fled_mask |= FLED1_IOUT;
+		} else if (led_sources[0] == FLED2) {
+			fled_id = FLED2;
+			led->fled_mask |= FLED2_IOUT;
+		} else {
+			dev_err(dev,
+				"Wrong \"led-sources\" DT property value.\n");
+			return -EINVAL;
+		}
+
+		sub_leds[fled_id].fled_id = fled_id;
+
+		ret = of_property_read_string(child_node, "label",
+					(const char **) &cfg->label[fled_id]);
+		if (ret < 0) {
+			dev_err(dev, "Error reading \"label\" DT property.\n");
+			return ret;
+		}
+
+		of_property_read_u32(child_node, "max-microamp",
+						&cfg->iout_torch_max[fled_id]);
+		of_property_read_u32(child_node, "flash-max-microamp",
+						&cfg->iout_flash_max[fled_id]);
+		of_property_read_u32(child_node, "flash-timeout-us",
+						&cfg->flash_timeout[fled_id]);
+
+		if (++cfg->num_leds == 2 ||
+		    (max77693_fled_used(led, FLED1) &&
+		     max77693_fled_used(led, FLED2)))
+			break;
+	}
+
+	if (cfg->num_leds == 0) {
+		dev_err(dev, "No DT child node found for the connected LED.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void clamp_align(u32 *v, u32 min, u32 max, u32 step)
+{
+	*v = clamp_val(*v, min, max);
+	if (step > 1)
+		*v = (*v - min) / step * step + min;
+}
+
+static void max77693_led_validate_configuration(struct max77693_led_device *led,
+					struct max77693_led_config_data *cfg)
+{
+	int i;
+
+	if (cfg->num_leds == 1 &&
+	    max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
+		led->iout_joint = true;
+
+	cfg->boost_mode = clamp_val(cfg->boost_mode, MAX77693_LED_BOOST_NONE,
+			    MAX77693_LED_BOOST_FIXED);
+
+	/* Boost must be enabled if both current outputs are used */
+	if ((cfg->boost_mode == MAX77693_LED_BOOST_NONE) && led->iout_joint)
+		cfg->boost_mode = MAX77693_LED_BOOST_FIXED;
+
+	/* Split max current settings to both outputs in case of joint leds */
+	if (led->iout_joint) {
+		cfg->iout_torch_max[FLED1] /= 2;
+		cfg->iout_torch_max[FLED2] = cfg->iout_torch_max[FLED1];
+		cfg->iout_flash_max[FLED1] /= 2;
+		cfg->iout_flash_max[FLED2] = cfg->iout_flash_max[FLED1];
+	}
+
+	for (i = FLED1; i <= FLED2; ++i) {
+		if (max77693_fled_used(led, i)) {
+			clamp_align(&cfg->iout_torch_max[i], TORCH_IOUT_MIN,
+					TORCH_IOUT_MAX, TORCH_IOUT_STEP);
+			clamp_align(&cfg->iout_flash_max[i], FLASH_IOUT_MIN,
+					cfg->boost_mode ? FLASH_IOUT_MAX_2LEDS :
+							FLASH_IOUT_MAX_1LED,
+					FLASH_IOUT_STEP);
+		} else {
+			cfg->iout_torch_max[i] = cfg->iout_flash_max[i] = 0;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cfg->flash_timeout); ++i)
+		clamp_align(&cfg->flash_timeout[i], FLASH_TIMEOUT_MIN,
+				FLASH_TIMEOUT_MAX, FLASH_TIMEOUT_STEP);
+
+	cfg->trigger_type = clamp_val(cfg->trigger_type,
+					MAX77693_LED_TRIG_TYPE_EDGE,
+					MAX77693_LED_TRIG_TYPE_LEVEL);
+
+	clamp_align(&cfg->boost_vout, FLASH_VOUT_MIN, FLASH_VOUT_MAX,
+							FLASH_VOUT_STEP);
+
+	if (cfg->low_vsys)
+		clamp_align(&cfg->low_vsys, MAX_FLASH1_VSYS_MIN,
+				MAX_FLASH1_VSYS_MAX, MAX_FLASH1_VSYS_STEP);
+}
+
+static int max77693_led_get_configuration(struct max77693_led_device *led,
+				struct max77693_led_config_data *cfg)
+{
+	int ret;
+
+	ret = max77693_led_parse_dt(led, cfg);
+	if (ret < 0)
+		return ret;
+
+	max77693_led_validate_configuration(led, cfg);
+
+	memcpy(led->iout_torch_max, cfg->iout_torch_max,
+				sizeof(led->iout_torch_max));
+	memcpy(led->iout_flash_max, cfg->iout_flash_max,
+				sizeof(led->iout_flash_max));
+	led->trigger_type = cfg->trigger_type;
+	led->allowed_modes = MODE_FLASH_MASK;
+
+	return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+	.flash_brightness_set	= max77693_led_flash_brightness_set,
+	.strobe_set		= max77693_led_flash_strobe_set,
+	.strobe_get		= max77693_led_flash_strobe_get,
+	.timeout_set		= max77693_led_flash_timeout_set,
+	.fault_get		= max77693_led_flash_fault_get,
+};
+
+static void max77693_init_flash_settings(struct max77693_led_device *led,
+					 int fled_id,
+					 struct max77693_led_config_data *cfg,
+					 struct max77693_led_settings *s)
+{
+	struct led_flash_setting *setting;
+
+	/* Init torch intensity setting */
+	setting = &s->torch_brightness;
+	setting->min = TORCH_IOUT_MIN;
+	setting->max = cfg->iout_torch_max[fled_id];
+	setting->max = led->iout_joint ?
+		cfg->iout_torch_max[FLED1] + cfg->iout_torch_max[FLED2] :
+		cfg->iout_torch_max[fled_id];
+	setting->step = TORCH_IOUT_STEP;
+	setting->val = setting->max;
+
+	/* Init flash intensity setting */
+	setting = &s->flash_brightness;
+	setting->min = FLASH_IOUT_MIN;
+	setting->max = led->iout_joint ?
+		cfg->iout_flash_max[FLED1] + cfg->iout_flash_max[FLED2] :
+		cfg->iout_flash_max[fled_id];
+	setting->step = FLASH_IOUT_STEP;
+	setting->val = setting->max;
+
+	/* Init flash timeout setting */
+	setting = &s->flash_timeout;
+	setting->min = FLASH_TIMEOUT_MIN;
+	setting->max = cfg->flash_timeout[fled_id];
+	setting->step = FLASH_TIMEOUT_STEP;
+	setting->val = setting->max;
+}
+
+static void max77693_init_fled_cdev(struct max77693_led_device *led,
+				int fled_id,
+				struct max77693_led_config_data *cfg)
+{
+	struct led_classdev_flash *fled_cdev;
+	struct led_classdev *led_cdev;
+	struct max77693_sub_led *sub_led = &led->sub_leds[fled_id];
+	struct max77693_led_settings settings;
+
+	/* Initialize flash settings */
+	max77693_init_flash_settings(led, fled_id, cfg, &settings);
+
+	/* Initialize LED Flash class device */
+	fled_cdev = &sub_led->fled_cdev;
+	fled_cdev->ops = &flash_ops;
+	led_cdev = &fled_cdev->led_cdev;
+	led_cdev->name = cfg->label[fled_id];
+	led_cdev->brightness_set = max77693_led_brightness_set;
+	led_cdev->brightness_set_sync = max77693_led_brightness_set_sync;
+	INIT_WORK(&sub_led->work_brightness_set,
+			max77693_led_brightness_set_work);
+
+	led_cdev->max_brightness = settings.torch_brightness.val /
+					TORCH_IOUT_STEP;
+	led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+	fled_cdev->brightness = settings.flash_brightness;
+	fled_cdev->timeout = settings.flash_timeout;
+	sub_led->flash_timeout = fled_cdev->timeout.val;
+}
+
+static int max77693_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
+	struct max77693_led_device *led;
+	struct max77693_sub_led *sub_leds;
+	struct max77693_led_config_data cfg = {};
+	int init_fled_cdev[2], i, ret;
+
+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->pdev = pdev;
+	led->regmap = iodev->regmap;
+	sub_leds = led->sub_leds;
+
+	platform_set_drvdata(pdev, led);
+	ret = max77693_led_get_configuration(led, &cfg);
+	if (ret < 0)
+		return ret;
+
+	ret = max77693_setup(led, &cfg);
+	if (ret < 0)
+		return ret;
+
+	init_fled_cdev[FLED1] =
+			led->iout_joint || max77693_fled_used(led, FLED1);
+	init_fled_cdev[FLED2] =
+			!led->iout_joint && max77693_fled_used(led, FLED2);
+
+	/* Initialize LED Flash class device(s) */
+	for (i = FLED1; i <= FLED2; ++i)
+		if (init_fled_cdev[i])
+			max77693_init_fled_cdev(led, i, &cfg);
+	mutex_init(&led->lock);
+
+	/* Register LED Flash class device(s) */
+	for (i = FLED1; i <= FLED2; ++i) {
+		if (!init_fled_cdev[i])
+			continue;
+
+		ret = led_classdev_flash_register(dev, &sub_leds[i].fled_cdev);
+		if (ret < 0) {
+			/*
+			 * At this moment FLED1 might have been already
+			 * registered and it needs to be released.
+			 */
+			if (i == FLED2)
+				goto err_register_led2;
+			else
+				goto err_register_led1;
+		}
+	}
+
+	return 0;
+
+err_register_led2:
+	/* It is possible than only FLED2 was to be registered */
+	if (!init_fled_cdev[FLED1])
+		goto err_register_led1;
+	led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+err_register_led1:
+	mutex_destroy(&led->lock);
+
+	return ret;
+}
+
+static int max77693_led_remove(struct platform_device *pdev)
+{
+	struct max77693_led_device *led = platform_get_drvdata(pdev);
+	struct max77693_sub_led *sub_leds = led->sub_leds;
+
+	if (led->iout_joint || max77693_fled_used(led, FLED1)) {
+		led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+		cancel_work_sync(&sub_leds[FLED1].work_brightness_set);
+	}
+
+	if (!led->iout_joint && max77693_fled_used(led, FLED2)) {
+		led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
+		cancel_work_sync(&sub_leds[FLED2].work_brightness_set);
+	}
+
+	mutex_destroy(&led->lock);
+
+	return 0;
+}
+
+static const struct of_device_id max77693_led_dt_match[] = {
+	{.compatible = "maxim,max77693-led"},
+	{},
+};
+
+static struct platform_driver max77693_led_driver = {
+	.probe		= max77693_led_probe,
+	.remove		= max77693_led_remove,
+	.driver		= {
+		.name	= "max77693-led",
+		.owner	= THIS_MODULE,
+		.of_match_table = max77693_led_dt_match,
+	},
+};
+
+module_platform_driver(max77693_led_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX77693 led flash driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5


  parent reply	other threads:[~2015-03-04 16:16 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-04 16:14 [PATCH/RFC v12 00/19] LED / flash API integration Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 01/19] leds: flash: Remove synchronized flash strobe feature Jacek Anaszewski
2015-03-09 23:23   ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 02/19] leds: flash: document sysfs interface Jacek Anaszewski
2015-03-10  0:17   ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 03/19] Documentation: leds: Add description of LED Flash class extension Jacek Anaszewski
2015-03-10  0:23   ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 04/19] dt-binding: leds: Add common LED DT bindings macros Jacek Anaszewski
2015-03-05  7:56   ` Jacek Anaszewski
2015-03-10  0:33     ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 05/19] mfd: max77693: Modify flash cell name identifiers Jacek Anaszewski
2015-03-09  9:36   ` Lee Jones
2015-03-04 16:14 ` [PATCH/RFC v12 06/19] mfd: max77693: Remove struct max77693_led_platform_data Jacek Anaszewski
2015-03-09  9:35   ` Lee Jones
2015-03-04 16:14 ` [PATCH/RFC v12 07/19] mfd: max77693: add TORCH_IOUT_MASK macro Jacek Anaszewski
2015-03-09  9:36   ` Lee Jones
2015-03-04 16:14 ` [PATCH/RFC v12 08/19] mfd: max77693: Adjust FLASH_EN_SHIFT and TORCH_EN_SHIFT macros Jacek Anaszewski
2015-03-09  9:35   ` Lee Jones
2015-03-04 16:14 ` Jacek Anaszewski [this message]
2015-03-04 16:14 ` [PATCH/RFC v12 10/19] DT: Add documentation for the mfd Maxim max77693 Jacek Anaszewski
2015-03-09 10:54   ` Sakari Ailus
2015-03-09 12:19     ` Jacek Anaszewski
2015-03-09 12:37       ` Sakari Ailus
2015-03-09 13:45         ` Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 11/19] leds: Add driver for AAT1290 current regulator Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 12/19] of: Add Skyworks Solutions, Inc. vendor prefix Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 13/19] DT: Add documentation for the Skyworks AAT1290 Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 14/19] exynos4-is: Add support for v4l2-flash subdevs Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 15/19] media: Add registration helpers for V4L2 flash sub-devices Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 16/19] Documentation: leds: Add description of v4l2-flash sub-device Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 17/19] DT: Add documentation for exynos4-is 'flashes' property Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 18/19] leds: max77693: add support for V4L2 Flash sub-device Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 19/19] leds: aat1290: " Jacek Anaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425485680-8417-10-git-send-email-j.anaszewski@samsung.com \
    --to=j.anaszewski@samsung.com \
    --cc=a.hajda@samsung.com \
    --cc=cooloney@gmail.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rpurdie@rpsys.net \
    --cc=s.nawrocki@samsung.com \
    --cc=sakari.ailus@iki.fi \
    --subject='Re: [PATCH/RFC v12 09/19] leds: Add support for max77693 mfd flash cell' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).