LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: linux-leds@vger.kernel.org, linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	kyungmin.park@samsung.com, pavel@ucw.cz, cooloney@gmail.com,
	rpurdie@rpsys.net, sakari.ailus@iki.fi, s.nawrocki@samsung.com,
	Jacek Anaszewski <j.anaszewski@samsung.com>
Subject: [PATCH/RFC v12 13/19] DT: Add documentation for the Skyworks AAT1290
Date: Wed, 04 Mar 2015 17:14:34 +0100	[thread overview]
Message-ID: <1425485680-8417-14-git-send-email-j.anaszewski@samsung.com> (raw)
In-Reply-To: <1425485680-8417-1-git-send-email-j.anaszewski@samsung.com>

This patch adds device tree binding documentation for
1.5A Step-Up Current Regulator for Flash LEDs.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
 .../devicetree/bindings/leds/leds-aat1290.txt      |   64 ++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
new file mode 100644
index 0000000..4f3583d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
@@ -0,0 +1,64 @@
+* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+The device is controlled through two pins: FL_EN and EN_SET. The pins when,
+asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+respectively. In order to add a capability of selecting the strobe signal source
+(e.g. GPIO or ISP) there is an additional switch required, independent of the
+flash chip.
+
+Required properties:
+
+- compatible : Must be "skyworks,aat1290".
+- gpios : Two gpio pins in order FLEN, EN/SET
+
+Optional properties:
+- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
+		"default" and "host" must refer to the same pin configration
+		node, which sets the strobe signal source to host. Entry "isp"
+		must refer to the pin configuration node, which sets the strobe
+		signal source to ISP.
+
+The LED connected to the device must be represented by a child node -
+see Documentation/devicetree/bindings/leds/common.txt.
+
+Required properties of the LED child node:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+- flash-max-microamp : Maximum intensity in microamperes of the flash LED -
+		       it can be calculated using following formula:
+		       I = 1A * 162kohm / Rset
+- flash-timeout-us : Maximum flash timeout in microseconds -
+		     it can be calculated using following formula:
+		     T = 8.82 * 10^9 * Ct.
+
+Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with a
+switch that allows for routing the strobe source signal either from host or
+from ISP):
+
+aat1290 {
+	compatible = "skyworks,aat1290";
+	gpios = <&gpj1 1 0>, <&gpj1 2 0>;
+	pinctrl-names = "default", "host", "isp";
+	pinctrl-0 = <&camera_flash_host>;
+	pinctrl-1 = <&camera_flash_host>;
+	pinctrl-2 = <&camera_flash_isp>;
+
+	camera_flash: flash-led {
+		label = "aat1290-flash";
+		flash-max-microamp = <1012500>
+		flash-timeout-us = <1940000>;
+	};
+};
+
+&pinctrl_0 {
+	camera_flash_host: camera-flash-host {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <1>;
+		samsung,pin-val = <0>;
+	};
+
+	camera_flash_isp: camera-flash-isp {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <1>;
+		samsung,pin-val = <1>;
+	};
+};
-- 
1.7.9.5


  parent reply	other threads:[~2015-03-04 16:16 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-04 16:14 [PATCH/RFC v12 00/19] LED / flash API integration Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 01/19] leds: flash: Remove synchronized flash strobe feature Jacek Anaszewski
2015-03-09 23:23   ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 02/19] leds: flash: document sysfs interface Jacek Anaszewski
2015-03-10  0:17   ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 03/19] Documentation: leds: Add description of LED Flash class extension Jacek Anaszewski
2015-03-10  0:23   ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 04/19] dt-binding: leds: Add common LED DT bindings macros Jacek Anaszewski
2015-03-05  7:56   ` Jacek Anaszewski
2015-03-10  0:33     ` Bryan Wu
2015-03-04 16:14 ` [PATCH/RFC v12 05/19] mfd: max77693: Modify flash cell name identifiers Jacek Anaszewski
2015-03-09  9:36   ` Lee Jones
2015-03-04 16:14 ` [PATCH/RFC v12 06/19] mfd: max77693: Remove struct max77693_led_platform_data Jacek Anaszewski
2015-03-09  9:35   ` Lee Jones
2015-03-04 16:14 ` [PATCH/RFC v12 07/19] mfd: max77693: add TORCH_IOUT_MASK macro Jacek Anaszewski
2015-03-09  9:36   ` Lee Jones
2015-03-04 16:14 ` [PATCH/RFC v12 08/19] mfd: max77693: Adjust FLASH_EN_SHIFT and TORCH_EN_SHIFT macros Jacek Anaszewski
2015-03-09  9:35   ` Lee Jones
2015-03-04 16:14 ` [PATCH/RFC v12 09/19] leds: Add support for max77693 mfd flash cell Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 10/19] DT: Add documentation for the mfd Maxim max77693 Jacek Anaszewski
2015-03-09 10:54   ` Sakari Ailus
2015-03-09 12:19     ` Jacek Anaszewski
2015-03-09 12:37       ` Sakari Ailus
2015-03-09 13:45         ` Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 11/19] leds: Add driver for AAT1290 current regulator Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 12/19] of: Add Skyworks Solutions, Inc. vendor prefix Jacek Anaszewski
2015-03-04 16:14 ` Jacek Anaszewski [this message]
2015-03-04 16:14 ` [PATCH/RFC v12 14/19] exynos4-is: Add support for v4l2-flash subdevs Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 15/19] media: Add registration helpers for V4L2 flash sub-devices Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 16/19] Documentation: leds: Add description of v4l2-flash sub-device Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 17/19] DT: Add documentation for exynos4-is 'flashes' property Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 18/19] leds: max77693: add support for V4L2 Flash sub-device Jacek Anaszewski
2015-03-04 16:14 ` [PATCH/RFC v12 19/19] leds: aat1290: " Jacek Anaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425485680-8417-14-git-send-email-j.anaszewski@samsung.com \
    --to=j.anaszewski@samsung.com \
    --cc=cooloney@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rpurdie@rpsys.net \
    --cc=s.nawrocki@samsung.com \
    --cc=sakari.ailus@iki.fi \
    --subject='Re: [PATCH/RFC v12 13/19] DT: Add documentation for the Skyworks AAT1290' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).