LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Stefan Agner <stefan@agner.ch>
To: dwmw2@infradead.org, computersforpeace@gmail.com
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	shawn.guo@linaro.org, kernel@pengutronix.de,
	boris.brezillon@free-electrons.com, marb@ixxat.de,
	aaron@tastycactus.com, bpringlemeir@nbsps.com,
	linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH v2 5/6] ARM: dts: vf610: add NAND flash controller peripherial
Date: Mon,  9 Mar 2015 17:38:51 +0100	[thread overview]
Message-ID: <1425919132-13827-6-git-send-email-stefan@agner.ch> (raw)
In-Reply-To: <1425919132-13827-1-git-send-email-stefan@agner.ch>

This adds the NAND flash controller (NFC) peripherial. The driver
supports the SLC NAND chips found on Freescale's Vybrid Tower System
Module. The Micron NAND chip on the module needs 4-bit ECC per 512
byte page. Use 24-bit ECC per 2k page, which is supported by the
driver.

Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/boot/dts/vf610-twr.dts | 44 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/vfxxx.dtsi    |  8 ++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index f64fddc..f42d155 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -287,6 +287,50 @@
 	status = "okay";
 };
 
+&iomuxc {
+	vf610-twr {
+		pinctrl_nfc_1: nfcgrp_1 {
+			fsl,pins = <
+			VF610_PAD_PTD31__NF_IO15	0x28df
+			VF610_PAD_PTD30__NF_IO14	0x28df
+			VF610_PAD_PTD29__NF_IO13	0x28df
+			VF610_PAD_PTD28__NF_IO12	0x28df
+			VF610_PAD_PTD27__NF_IO11	0x28df
+			VF610_PAD_PTD26__NF_IO10	0x28df
+			VF610_PAD_PTD25__NF_IO9		0x28df
+			VF610_PAD_PTD24__NF_IO8		0x28df
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B	0x28c2
+			VF610_PAD_PTB25__NF_CE0_B	0x28c2
+			VF610_PAD_PTB27__NF_RE_B	0x28c2
+			VF610_PAD_PTC26__NF_RB_B	0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	nand-ecc-strength = <24>;
+	nand-ecc-step-size = <2048>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc_1>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 32de809..8c85972 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -507,6 +507,14 @@
 				status = "disabled";
 			};
 
+			nfc: nand@400e0000 {
+				compatible = "fsl,vf610-nfc";
+				reg = <0x400e0000 0x4000>;
+				interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_NFC>;
+				clock-names = "nfc";
+				status = "disabled";
+			};
 		};
 	};
 };
-- 
2.3.1


  parent reply	other threads:[~2015-03-09 16:39 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-09 16:38 [PATCH v2 0/6] mtd: nand: vf610_nfc: Freescale NFC for VF610 Stefan Agner
2015-03-09 16:38 ` [PATCH v2 1/6] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others Stefan Agner
2015-03-09 16:38 ` [PATCH v2 2/6] mtd: nand: vf610_nfc: add hardware BCH-ECC support Stefan Agner
2015-03-09 16:38 ` [PATCH v2 3/6] mtd: nand: vf610_nfc: add device tree bindings Stefan Agner
2015-03-09 20:11   ` Bill Pringlemeir
2015-03-09 16:38 ` [PATCH v2 4/6] ARM: vf610: enable NAND Flash Controller Stefan Agner
2015-03-09 16:38 ` Stefan Agner [this message]
2015-03-09 16:38 ` [PATCH v2 6/6] ARM: dts: vf-colibri: enable NAND flash controller Stefan Agner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425919132-13827-6-git-send-email-stefan@agner.ch \
    --to=stefan@agner.ch \
    --cc=aaron@tastycactus.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=bpringlemeir@nbsps.com \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marb@ixxat.de \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.guo@linaro.org \
    --subject='Re: [PATCH v2 5/6] ARM: dts: vf610: add NAND flash controller peripherial' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).