LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Lee Jones <lee.jones@linaro.org>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Kumar Gala <galak@codeaurora.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Mark Rutland <mark.rutland@arm.com>,
	Pawel Moll <pawel.moll@arm.com>, Rob Herring <robh+dt@kernel.org>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Chen-Yu Tsai <wens@csie.org>
Subject: [PATCH v5 07/12] regulator: axp20x: add support for AXP22X regulators
Date: Tue, 10 Mar 2015 19:59:18 +0800	[thread overview]
Message-ID: <1425988764-23618-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1425988764-23618-1-git-send-email-wens@csie.org>

From: Boris BREZILLON <boris.brezillon@free-electrons.com>

Add AXP22X regulator definitions and variant id associations.
This introduces a new "switch" type output for one of the regulators.
It is a switchable secondary output of one regulator, with the same
voltage level as the primary output.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
[wens@csie.org: Moved variant choosing to multi family support patch]
[wens@csie.org: Add dc-dc work frequency range]
[wens@csie.org: Add "switch" type output regulator DC1SW]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/regulator/axp20x-regulator.c | 96 ++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 50ae0b5f2c0c..646829132b59 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -27,8 +27,12 @@
 #define AXP20X_IO_ENABLED		0x03
 #define AXP20X_IO_DISABLED		0x07
 
+#define AXP22X_IO_ENABLED		0x04
+#define AXP22X_IO_DISABLED		0x03
+
 #define AXP20X_WORKMODE_DCDC2_MASK	BIT(2)
 #define AXP20X_WORKMODE_DCDC3_MASK	BIT(1)
+#define AXP22X_WORKMODE_DCDCX_MASK(x)	BIT(x)
 
 #define AXP20X_FREQ_DCDC_MASK		0x0f
 
@@ -74,6 +78,26 @@
 		.ops		= &axp20x_ops,					\
 	}
 
+#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
+		    _vmask, _ereg, _emask) 					\
+	[_family##_##_id] = {							\
+		.name		= #_id,						\
+		.supply_name	= (_supply),					\
+		.of_match	= of_match_ptr(_match),				\
+		.regulators_node = of_match_ptr("regulators"),			\
+		.type		= REGULATOR_VOLTAGE,				\
+		.id		= _family##_##_id,				\
+		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
+		.owner		= THIS_MODULE,					\
+		.min_uV		= (_min) * 1000,				\
+		.uV_step	= (_step) * 1000,				\
+		.vsel_reg	= (_vreg),					\
+		.vsel_mask	= (_vmask),					\
+		.enable_reg	= (_ereg),					\
+		.enable_mask	= (_emask),					\
+		.ops		= &axp20x_ops_sw,				\
+	}
+
 #define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt)			\
 	[_family##_##_id] = {							\
 		.name		= #_id,						\
@@ -135,6 +159,14 @@ static struct regulator_ops axp20x_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
+static struct regulator_ops axp20x_ops_sw = {
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
 static const struct regulator_desc axp20x_regulators[] = {
 	AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
 		 AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
@@ -152,6 +184,52 @@ static const struct regulator_desc axp20x_regulators[] = {
 		    AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
 };
 
+static const struct regulator_desc axp22x_regulators[] = {
+	AXP_DESC(AXP22X, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+		 AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
+	AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
+		 AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
+	AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
+		 AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
+	AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
+		 AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
+	AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
+		 AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(4)),
+	/* secondary switchable output of DCDC1 */
+	AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100,
+		    AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
+	/* LDO regulator internally chained to DCDC5 */
+	AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dcdc5", 700, 1400, 100,
+		 AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+	AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
+	AXP_DESC(AXP22X, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
+	AXP_DESC(AXP22X, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+	AXP_DESC(AXP22X, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+	AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
+	AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+	AXP_DESC(AXP22X, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
+	AXP_DESC(AXP22X, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+	AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 1800, 3300, 100,
+		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 1800, 3300, 100,
+		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
+};
+
 static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -165,6 +243,12 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		def = 1500;
 		step = 75;
 		break;
+	case AXP221_ID:
+		min = 1800;
+		max = 4050;
+		def = 3000;
+		step = 150;
+		break;
 	default:
 		dev_err(&pdev->dev,
 			"Setting DCDC frequency for unsupported AXP variant\n");
@@ -237,6 +321,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
 		workmode <<= ffs(mask) - 1;
 		break;
 
+	case AXP221_ID:
+		if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
+			return -EINVAL;
+
+		mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
+		workmode <<= id - AXP22X_DCDC1;
+		break;
+
 	default:
 		/* should not happen */
 		WARN_ON(1);
@@ -265,6 +357,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		regulators = axp20x_regulators;
 		nregulators = AXP20X_REG_ID_MAX;
 		break;
+	case AXP221_ID:
+		regulators = axp22x_regulators;
+		nregulators = AXP22X_REG_ID_MAX;
+		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
 			axp20x->variant);
-- 
2.1.4


  parent reply	other threads:[~2015-03-10 12:01 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-10 11:59 [PATCH v5 00/12] mfd: axp20x: add AXP221 PMIC support Chen-Yu Tsai
2015-03-10 11:59 ` [PATCH v5 01/12] ARM: dts: sun6i: add p2wi controller node to dtsi Chen-Yu Tsai
2015-03-10 21:27   ` Maxime Ripard
2015-03-10 11:59 ` [PATCH v5 02/12] ARM: dts: sun6i: hummingbird: Enable P2WI controller Chen-Yu Tsai
2015-03-10 21:27   ` Maxime Ripard
2015-03-10 11:59 ` [PATCH v5 03/12] mfd: axp20x: add AXP22x PMIC support Chen-Yu Tsai
2015-03-23 11:52   ` Lee Jones
2015-03-23 16:58     ` Chen-Yu Tsai
2015-03-10 11:59 ` [PATCH v5 04/12] mfd: axp20x: update DT bindings with AXP22x compatibles Chen-Yu Tsai
2015-03-23 11:53   ` Lee Jones
2015-03-10 11:59 ` [PATCH v5 05/12] ARM: dts: sun6i: hummingbird: Add AXP221 PMIC device node Chen-Yu Tsai
2015-03-10 21:28   ` Maxime Ripard
2015-03-10 11:59 ` [PATCH v5 06/12] regulator: axp20x: prepare support for multiple AXP chip families Chen-Yu Tsai
2015-03-10 20:04   ` Mark Brown
2015-03-10 20:05   ` Mark Brown
2015-03-10 11:59 ` Chen-Yu Tsai [this message]
2015-03-10 20:04   ` [PATCH v5 07/12] regulator: axp20x: add support for AXP22X regulators Mark Brown
2015-03-10 20:05   ` Mark Brown
2015-03-10 11:59 ` [PATCH v5 08/12] mfd: axp20x: Add AXP22x regulator information to DT bindings Chen-Yu Tsai
2015-03-23 11:54   ` Lee Jones
2015-03-23 17:43     ` Chen-Yu Tsai
2015-03-10 11:59 ` [PATCH v5 09/12] mfd: axp20x: Enable AXP22X regulators Chen-Yu Tsai
2015-03-23 11:55   ` Lee Jones
2015-03-10 11:59 ` [PATCH v5 10/12] ARM: dts: sun6i: hummingbird: Add AXP221 regulator nodes Chen-Yu Tsai
2015-03-10 21:30   ` Maxime Ripard
2015-03-10 11:59 ` [PATCH v5 11/12] ARM: dts: sun6i: Add pinmux settings for mmc1 to dtsi Chen-Yu Tsai
2015-03-10 21:31   ` Maxime Ripard
2015-03-10 11:59 ` [PATCH v5 12/12] ARM: dts: sun6i: hummingbird: Add basic support for the WiFi module Chen-Yu Tsai
2015-03-23 22:16   ` Maxime Ripard
2015-03-24  0:24     ` Chen-Yu Tsai
2015-03-10 11:59 ` [PATCH v5 12/12] ARM: dts: sun6i: hummingbird: Enable the onboard " Chen-Yu Tsai
2015-03-10 21:32   ` Maxime Ripard
2015-03-11  3:11     ` Chen-Yu Tsai
2015-03-11  8:52       ` Maxime Ripard
2015-03-11  9:08         ` Chen-Yu Tsai
2015-03-11 14:28           ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425988764-23618-8-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=boris.brezillon@free-electrons.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    --subject='Re: [PATCH v5 07/12] regulator: axp20x: add support for AXP22X regulators' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).