LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Doug Anderson <dianders@chromium.org>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Jaehoon Chung <jh80.chung@samsung.com>,
	Seungwon Jeon <tgih.jun@samsung.com>
Cc: Mark Brown <broonie@kernel.org>,
	Alexandru Stan <amstan@chromium.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Sonny Rao <sonnyrao@chromium.org>,
	Andrew Bresticker <abrestic@chromium.org>,
	Addy Ke <addy.ke@rock-chips.com>,
	javier.martinez@collabora.co.uk,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Doug Anderson <dianders@chromium.org>,
	chris@printf.net, johan.rudholm@axis.com,
	adrian.hunter@intel.com, tim.kryger@gmail.com,
	andrew_gabbasov@mentor.com, s.hauer@pengutronix.de,
	linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 2/4] mmc: core: Add mmc_regulator_set_vqmmc()
Date: Wed, 11 Mar 2015 15:15:15 -0700	[thread overview]
Message-ID: <1426112117-18220-2-git-send-email-dianders@chromium.org> (raw)
In-Reply-To: <1426112117-18220-1-git-send-email-dianders@chromium.org>

This adds logic to the MMC core to set VQMMC.  This is expected to be
called by MMC drivers like dw_mmc as part of (or instead of) their
start_signal_voltage_switch() callback.

A few notes:

* When setting the signal voltage to 3.3V we do our best to make VQMMC
  and VMMC match.  It's been reported that this makes some old cards
  happy since they were tested back in the day before UHS when VQMMC
  and VMMC were provided by the same regulator.  A nice side effect of
  this is that we don't end up on the hairy edge of VQMMC (2.7V),
  which some EEs claim is a little too close to the minimum for
  comfort.

* When setting the signal voltage to 1.8V or 1.2V we aim for that
  specific voltage instead of picking the lowest one in the range.

* We very purposely don't print errors in mmc_regulator_set_vqmmc().
  There are cases where the MMC core will try several different
  voltages and we don't want to pollute the logs.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Now use existing regulator_set_voltage_tol() function.

 drivers/mmc/core/core.c  | 51 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mmc/host.h |  7 +++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 23f10f7..1d3b84e 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1394,6 +1394,57 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
 
+static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator,
+						  int new_uV, int tol_uV)
+{
+	/*
+	 * Check if supported first to avoid errors since we may try several
+	 * signal levels during power up and don't want to show errors.
+	 */
+	if (!regulator_is_supported_voltage_tol(regulator, new_uV, tol_uV))
+		return -EINVAL;
+
+	return regulator_set_voltage_tol(regulator, new_uV, tol_uV);
+}
+
+/**
+ * mmc_regulator_set_vqmmc - Set VQMMC as per the ios
+ *
+ * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible.
+ * That will match the behavior of old boards where VQMMC and VMMC were supplied
+ * by the same supply.  The Bus Operating conditions for 3.3V signaling in the
+ * SD card spec also define VQMMC in terms of VMMC.
+ *
+ * For 1.2V and 1.8V signaling we'll try to get as close as possible to the
+ * requested voltage.  This is definitely a good idea for UHS where there's a
+ * separate regulator on the card that's trying to make 1.8V and it's best if
+ * we match.
+ *
+ * This function is expected to be used by a controller's
+ * start_signal_voltage_switch() function.
+ */
+int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	/* If no vqmmc supply then we can't change the voltage */
+	if (IS_ERR(mmc->supply.vqmmc))
+		return -EINVAL;
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_120:
+		return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+			1200000, 100000);
+	case MMC_SIGNAL_VOLTAGE_180:
+		return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+			1800000, 100000);
+	case MMC_SIGNAL_VOLTAGE_330:
+		return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+			regulator_get_voltage(mmc->supply.vmmc), 300000);
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc);
+
 #endif /* CONFIG_REGULATOR */
 
 int mmc_regulator_get_supply(struct mmc_host *mmc)
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 0c8cbe5..edd7d59 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -416,6 +416,7 @@ int mmc_regulator_get_ocrmask(struct regulator *supply);
 int mmc_regulator_set_ocr(struct mmc_host *mmc,
 			struct regulator *supply,
 			unsigned short vdd_bit);
+int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios);
 #else
 static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
 {
@@ -428,6 +429,12 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
 {
 	return 0;
 }
+
+static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc,
+					  struct mmc_ios *ios)
+{
+	return -EINVAL;
+}
 #endif
 
 int mmc_regulator_get_supply(struct mmc_host *mmc);
-- 
2.2.0.rc0.207.ga3a616c


  reply	other threads:[~2015-03-11 22:21 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-11 22:15 [PATCH v4 1/4] mmc: dw_mmc: Don't try to enable the CD until we're sure we're not deferring Doug Anderson
2015-03-11 22:15 ` Doug Anderson [this message]
2015-03-16 14:05   ` [PATCH v4 2/4] mmc: core: Add mmc_regulator_set_vqmmc() Ulf Hansson
2015-03-16 15:12     ` Doug Anderson
2015-03-17 10:23       ` Ulf Hansson
2015-03-17 10:38         ` Mark Brown
2015-03-17 11:28           ` Ulf Hansson
2015-03-19  4:09         ` Doug Anderson
2015-03-19 11:14           ` Ulf Hansson
2015-03-19 11:36             ` Mark Brown
2015-03-20 10:55               ` Ulf Hansson
2015-03-20 11:28                 ` Mark Brown
2015-04-07 20:05                   ` Doug Anderson
2015-04-08 11:28                     ` Mark Brown
2015-03-11 22:15 ` [PATCH v4 3/4] mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch Doug Anderson
2015-03-11 22:15 ` [PATCH v4 4/4] ARM: dts: Specify VMMC and VQMMC on rk3288-evb Doug Anderson
2015-03-11 23:30   ` Heiko Stuebner
2015-04-07 21:37     ` Heiko Stübner
2015-03-13 11:32 ` [PATCH v4 1/4] mmc: dw_mmc: Don't try to enable the CD until we're sure we're not deferring Jaehoon Chung
2015-03-13 12:10   ` Heiko Stuebner
2015-03-16  2:09     ` Jaehoon Chung
2015-03-27  5:55 ` Jaehoon Chung
2015-03-27 15:46   ` Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426112117-18220-2-git-send-email-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=abrestic@chromium.org \
    --cc=addy.ke@rock-chips.com \
    --cc=adrian.hunter@intel.com \
    --cc=alim.akhtar@samsung.com \
    --cc=amstan@chromium.org \
    --cc=andrew_gabbasov@mentor.com \
    --cc=broonie@kernel.org \
    --cc=chris@printf.net \
    --cc=heiko@sntech.de \
    --cc=javier.martinez@collabora.co.uk \
    --cc=jh80.chung@samsung.com \
    --cc=johan.rudholm@axis.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sonnyrao@chromium.org \
    --cc=tgih.jun@samsung.com \
    --cc=tim.kryger@gmail.com \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [PATCH v4 2/4] mmc: core: Add mmc_regulator_set_vqmmc()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).