LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 0/6] i2c: qup: Add support for v2 tags and bam dma
@ 2015-03-13 17:49 Sricharan R
  2015-03-13 17:49 ` [PATCH 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts Sricharan R
                   ` (5 more replies)
  0 siblings, 6 replies; 17+ messages in thread
From: Sricharan R @ 2015-03-13 17:49 UTC (permalink / raw)
  To: devicetree, linux-arm-msm, linux-arm-kernel, dmaengine, galak,
	linux-i2c, linux-kernel
  Cc: sricharan, agross

QUP from version 2.1.1 onwards, supports a new format of
i2c command tags. Tag codes instructs the controller to
perform a operation like read/write. This new tagging version
supports and is required for adding bam dma capabilities.
v2 tags supports transfer of more than 256 bytes in a single
i2c transaction. Also adding bam dma support facilitates
transferring each i2c_msg in i2c_msgs without a 'stop' bit
in between which is required for some of the clients.

This series depends on the below bam dma bug fix
 https://lkml.org/lkml/2015/2/20/47

Tested this series on apq8074 dragon board eeprom client
on i2c bus1

Andy Gross (1):
  i2c: qup: Add V2 tags support

Sricharan R (5):
  i2c: qup: Change qup_wait_writeready function to use for all timeouts
  i2c: qup: Add bam dma capabilities
  i2c: qup: Transfer every i2c_msg in i2c_msgs without stop
  dts: msm8974: Add blsp2_bam dma node
  dts: msm8974: Add dma channels for blsp2_i2c1 node

 arch/arm/boot/dts/qcom-msm8974.dtsi |  12 +
 drivers/i2c/busses/i2c-qup.c        | 783 +++++++++++++++++++++++++++++++++---
 2 files changed, 741 insertions(+), 54 deletions(-)

-- 
1.8.2.1


^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2015-03-26  8:36 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-13 17:49 [PATCH 0/6] i2c: qup: Add support for v2 tags and bam dma Sricharan R
2015-03-13 17:49 ` [PATCH 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts Sricharan R
2015-03-13 17:49 ` [PATCH 2/6] i2c: qup: Add V2 tags support Sricharan R
2015-03-25 12:24   ` Ivan T. Ivanov
2015-03-26  5:44     ` Sricharan R
2015-03-26  7:31       ` Ivan T. Ivanov
2015-03-26  8:36         ` Sricharan R
2015-03-13 17:49 ` [PATCH 3/6] i2c: qup: Add bam dma capabilities Sricharan R
2015-03-25 13:10   ` Ivan T. Ivanov
2015-03-26  6:08     ` Sricharan R
2015-03-13 17:49 ` [PATCH 4/6] i2c: qup: Transfer every i2c_msg in i2c_msgs without stop Sricharan R
2015-03-13 17:49 ` [PATCH 5/6] dts: msm8974: Add blsp2_bam dma node Sricharan R
2015-03-17 12:48   ` Stanimir Varbanov
2015-03-17 13:10     ` sricharan
2015-03-13 17:49 ` [PATCH 6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node Sricharan R
2015-03-13 19:54   ` Andy Gross
2015-03-16  9:55     ` sricharan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).