LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Matthew Garrett <mjg59@coreos.com>
To: tj@kernel.org
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	kristen@linux.intel.com, Matthew Garrett <mjg59@coreos.com>,
	Matthew Garrett <mjg59@srcf.ucam.org>
Subject: [PATCH 1/3] libata: Stash initial power management configuration
Date: Sat, 18 Apr 2015 08:26:34 -0700	[thread overview]
Message-ID: <1429370796-5881-2-git-send-email-mjg59@coreos.com> (raw)
In-Reply-To: <1429370796-5881-1-git-send-email-mjg59@coreos.com>

The initial configuration for power management settings may be a result of
the firmware using its knowledge of the installed hardware to program
reasonable defaults. Stash as much of it as possible for later use.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
---
 drivers/ata/acard-ahci.c       |  3 +++
 drivers/ata/ahci.c             |  3 +++
 drivers/ata/ahci.h             |  7 +++++++
 drivers/ata/libahci.c          | 46 +++++++++++++++++++++++++++++++++++-------
 drivers/ata/libahci_platform.c |  4 ++++
 drivers/ata/libata-core.c      | 19 ++++++++++-------
 drivers/ata/libata-pmp.c       |  2 +-
 drivers/ata/libata.h           |  2 +-
 drivers/ata/sata_highbank.c    |  4 ++++
 include/linux/libata.h         |  3 +++
 10 files changed, 77 insertions(+), 16 deletions(-)

diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 12489ce..0029229 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -476,6 +476,9 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
 		ata_port_pbar_desc(ap, AHCI_PCI_BAR,
 				   0x100 + ap->port_no * 0x80, "port");
 
+		rc = ahci_setup_port_privdata(ap);
+		if (rc)
+			return rc;
 		/* set initial link pm policy */
 		/*
 		ap->pm_policy = NOT_AVAILABLE;
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c7a92a7..0f875e2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1436,6 +1436,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
 
+		rc = ahci_setup_port_privdata(ap);
+		if (rc)
+			return rc;
 
 		/* disabled/not-implemented port */
 		if (!(hpriv->port_map & (1 << i)))
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 71262e0..c1a4b6a 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -313,6 +313,12 @@ struct ahci_port_priv {
 	/* enclosure management info per PM slot */
 	struct ahci_em_priv	em_priv[EM_MAX_SLOTS];
 	char			*irq_desc;	/* desc in /proc/interrupts */
+	bool			init_alpe;	/* alpe enabled by default */
+	bool			init_asp;	/* asp enabled by default */
+	bool			init_devslp;	/* devslp enabled by default */
+	u32			init_dito;	/* initial dito configuration */
+	u32			init_deto;	/* initial deto configuration */
+	u32			init_mdat;	/* initial mdat configuration */
 };
 
 struct ahci_host_priv {
@@ -371,6 +377,7 @@ extern struct ata_port_operations ahci_platform_ops;
 extern struct ata_port_operations ahci_pmp_retry_srst_ops;
 
 unsigned int ahci_dev_classify(struct ata_port *ap);
+int ahci_setup_port_privdata(struct ata_port *ap);
 void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
 			u32 opts);
 void ahci_save_initial_config(struct device *dev,
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 61a9c07..f0c7120 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2212,19 +2212,53 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 }
 #endif
 
+/*
+ * Allocate port privdata and read back initial power management configuration
+ */
+int ahci_setup_port_privdata(struct ata_port *ap)
+{
+	struct ahci_port_priv *pp;
+	u32 cmd, devslp;
+	void __iomem *port_mmio = ahci_port_base(ap);
+
+	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		return -ENOMEM;
+
+	ap->private_data = pp;
+
+	cmd = readl(port_mmio + PORT_CMD);
+
+	if (cmd & PORT_CMD_ALPE)
+		pp->init_alpe = true;
+
+	if (cmd & PORT_CMD_ASP)
+		pp->init_asp = true;
+
+	devslp = readl(port_mmio + PORT_DEVSLP);
+
+	/* devslp unsupported or disabled */
+	if (!(devslp & PORT_DEVSLP_DSP) || !(devslp & PORT_DEVSLP_ADSE))
+		return 0;
+
+	pp->init_devslp = true;
+	pp->init_dito = (devslp >> PORT_DEVSLP_DITO_OFFSET) & 0x3ff;
+	pp->init_deto = (devslp >> PORT_DEVSLP_DETO_OFFSET) & 0xff;
+	pp->init_mdat = (devslp >> PORT_DEVSLP_MDAT_OFFSET) & 0x1f;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_setup_port_privdata);
+
 static int ahci_port_start(struct ata_port *ap)
 {
 	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
 	struct device *dev = ap->host->dev;
-	struct ahci_port_priv *pp;
 	void *mem;
 	dma_addr_t mem_dma;
 	size_t dma_sz, rx_fis_sz;
 
-	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
-	if (!pp)
-		return -ENOMEM;
-
 	if (ap->host->n_ports > 1) {
 		pp->irq_desc = devm_kzalloc(dev, 8, GFP_KERNEL);
 		if (!pp->irq_desc) {
@@ -2303,8 +2337,6 @@ static int ahci_port_start(struct ata_port *ap)
 		ap->lock = &pp->lock;
 	}
 
-	ap->private_data = pp;
-
 	/* engage engines, captain */
 	return ahci_port_resume(ap);
 }
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index d89305d..39946d4 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -563,6 +563,10 @@ int ahci_platform_init_host(struct platform_device *pdev,
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
 
+		rc = ahci_setup_port_privdata(ap);
+		if (rc)
+			return rc;
+
 		/* disabled/not-implemented port */
 		if (!(hpriv->port_map & (1 << i)))
 			ap->ops = &ata_dummy_port_ops;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f6cb1f1..c037f33 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2024,6 +2024,9 @@ retry:
 		}
 	}
 
+	if (id[79] & SATA_DIPM)
+		dev->init_dipm = true;
+
 	*p_class = class;
 
 	return 0;
@@ -5583,11 +5586,11 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
 }
 
 /**
- *	sata_link_init_spd - Initialize link->sata_spd_limit
- *	@link: Link to configure sata_spd_limit for
+ *	sata_link_init_config - Initialize link->sata_spd_limit and init_lpm
+ *	@link: Link to configure sata_spd_limit and init_lpm for
  *
- *	Initialize @link->[hw_]sata_spd_limit to the currently
- *	configured value.
+ *	Initialize @link->[hw_]sata_spd_limit and @link->init_lpm to the
+ *	currently configured value.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep).
@@ -5595,7 +5598,7 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
  *	RETURNS:
  *	0 on success, -errno on failure.
  */
-int sata_link_init_spd(struct ata_link *link)
+int sata_link_init_config(struct ata_link *link)
 {
 	u8 spd;
 	int rc;
@@ -5612,6 +5615,8 @@ int sata_link_init_spd(struct ata_link *link)
 
 	link->sata_spd_limit = link->hw_sata_spd_limit;
 
+	link->init_lpm = (link->saved_scontrol >> 8) & 0x7;
+
 	return 0;
 }
 
@@ -6161,9 +6166,9 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 			ap->cbl = ATA_CBL_SATA;
 
 		/* init sata_spd_limit to the current value */
-		sata_link_init_spd(&ap->link);
+		sata_link_init_config(&ap->link);
 		if (ap->slave_link)
-			sata_link_init_spd(ap->slave_link);
+			sata_link_init_config(ap->slave_link);
 
 		/* print per-port info to dmesg */
 		xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7ccc084..b9f7ce8 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -531,7 +531,7 @@ int sata_pmp_attach(struct ata_device *dev)
 		ap->ops->pmp_attach(ap);
 
 	ata_for_each_link(tlink, ap, EDGE)
-		sata_link_init_spd(tlink);
+		sata_link_init_config(tlink);
 
 	return 0;
 
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index a998a17..35016d6 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -99,7 +99,7 @@ extern bool ata_phys_link_online(struct ata_link *link);
 extern bool ata_phys_link_offline(struct ata_link *link);
 extern void ata_dev_init(struct ata_device *dev);
 extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
-extern int sata_link_init_spd(struct ata_link *link);
+extern int sata_link_init_config(struct ata_link *link);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern struct ata_port *ata_port_alloc(struct ata_host *host);
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 24e311f..a2adf3f 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -556,6 +556,10 @@ static int ahci_highbank_probe(struct platform_device *pdev)
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
 
+		rc = ahci_setup_port_privdata(ap);
+		if (rc)
+			goto err0;
+
 		/* disabled/not-implemented port */
 		if (!(hpriv->port_map & (1 << i)))
 			ap->ops = &ata_dummy_port_ops;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 8dad4a3..31c149b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -719,6 +719,8 @@ struct ata_device {
 	int			spdn_cnt;
 	/* ering is CLEAR_END, read comment above CLEAR_END */
 	struct ata_ering	ering;
+	/* Initial DIPM configuration */
+	bool			init_dipm;
 };
 
 /* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
@@ -788,6 +790,7 @@ struct ata_link {
 	struct ata_eh_context	eh_context;
 
 	struct ata_device	device[ATA_MAX_DEVICES];
+	u8			init_lpm; /* initial lpm configuration */
 };
 #define ATA_LINK_CLEAR_BEGIN		offsetof(struct ata_link, active_tag)
 #define ATA_LINK_CLEAR_END		offsetof(struct ata_link, device[0])
-- 
2.3.5


  reply	other threads:[~2015-04-18 15:27 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-18 15:26 Rework AHCI LPM handling a little Matthew Garrett
2015-04-18 15:26 ` Matthew Garrett [this message]
2015-04-21 21:26   ` [PATCH 1/3] libata: Stash initial power management configuration Tejun Heo
2015-04-18 15:26 ` [PATCH 2/3] libata: Add firmware_default LPM policy Matthew Garrett
2015-04-22 14:48   ` Tejun Heo
2015-05-11 20:24     ` Matthew Garrett
2015-05-11 20:28       ` Tejun Heo
2015-05-11 20:34         ` Matthew Garrett
2015-05-11 20:43           ` Tejun Heo
2015-04-18 15:26 ` [PATCH 3/3] libata: Change medium_power LPM policy to match Intel recommendations Matthew Garrett
2015-04-22 14:51   ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1429370796-5881-2-git-send-email-mjg59@coreos.com \
    --to=mjg59@coreos.com \
    --cc=kristen@linux.intel.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mjg59@srcf.ucam.org \
    --cc=tj@kernel.org \
    --subject='Re: [PATCH 1/3] libata: Stash initial power management configuration' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).