Kernel is not booting.............

Kernel is not booting.............

[ManojKwal]

Greetings! 

System details: 
Board: DTSP-ARM926Ej-S(new board) 
Cross-toolchain: ELDK4.1 
Linux kernel: 2.6.18 
u-boot: 1.1.6 


I sucessfully port u-boot on board...........But when i boot the kernel it
stuck in mid.........The complete log is following:




DRM-Engine # bootm 0x80000
## Booting image at 00080000 ...
   Image Name:   Linux-2.6.18-DRM
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    623896 Bytes = 609.3 kB
   Load Address: 0b008000
   Entry Point:  0b008000
   Verifying Checksum ... OK
OK
No initrd
## Transferring control to Linux (at address 0b008000) ...

Starting kernel ...

Uncompressing Linux........................................... done, booting
the kernel.
                                                                                       
Linux version 2.6.18-DRM (khandelwal@HotelTV-Server) (gcc version 4.0.0
(DENX ELDK 4.1 4.0.0)) #34 Mon Jan 28 17:35:46 KST 2008
CPU: ARM926EJ-S [41069263] revision 3 (ARMv5TEJ), cr=00053177
Machine: DTSP
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists.  Total pages: 16128
Kernel command line: root=/dev/ram0 mem=63M initrd=0xd000000,6M
ramdisk=16384 console=ttyS0,38400 init=/linuxrc
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
[cskim]:serial_dtsp_set_termios
[cskim] : [baud,quot] = 38400, 26
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 63MB = 63MB total
Memory: 56448KB available (980K code, 248K data, 68K
init)-------------------------->"HERE KERNEL STUCK"




Can anybody help me? I am a beginer on this type of work



Thanks in advance!

Regards
Manoj Khandelwal
Software Engineer

-- 
View this message in context: http://www.nabble.com/Kernel-is-not-booting.............-tp15132032p15132032.html
Sent from the linux-kernel mailing list archive at Nabble.com.

Re: Kernel is not booting.............

[Hans-Jürgen Koch]

Am Mon, 28 Jan 2008 02:13:09 -0800 (PST)
schrieb ManojKwal <kmanojcse23@gmail.com>:

> 
> Greetings! 
> 
> System details: 
> Board: DTSP-ARM926Ej-S(new board) 
> Cross-toolchain: ELDK4.1 
> Linux kernel: 2.6.18 
> u-boot: 1.1.6 
> 
> 
> I sucessfully port u-boot on board...........But when i boot the
> kernel it stuck in mid.........The complete log is following:
> 
> 
> 
> 
> DRM-Engine # bootm 0x80000
> ## Booting image at 00080000 ...
>    Image Name:   Linux-2.6.18-DRM
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    623896 Bytes = 609.3 kB
>    Load Address: 0b008000
>    Entry Point:  0b008000
>    Verifying Checksum ... OK
> OK
> No initrd
> ## Transferring control to Linux (at address 0b008000) ...
> 
> Starting kernel ...
> 
> Uncompressing Linux........................................... done,
> booting the kernel.
>                                                                                        
> Linux version 2.6.18-DRM (khandelwal@HotelTV-Server) (gcc version
> 4.0.0 (DENX ELDK 4.1 4.0.0)) #34 Mon Jan 28 17:35:46 KST 2008
> CPU: ARM926EJ-S [41069263] revision 3 (ARMv5TEJ), cr=00053177
> Machine: DTSP
> Memory policy: ECC disabled, Data cache writeback
> CPU0: D VIVT write-back cache
> CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
> CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
> Built 1 zonelists.  Total pages: 16128
> Kernel command line: root=/dev/ram0 mem=63M initrd=0xd000000,6M
> ramdisk=16384 console=ttyS0,38400 init=/linuxrc
> PID hash table entries: 256 (order: 8, 1024 bytes)
> Console: colour dummy device 80x30
> [cskim]:serial_dtsp_set_termios
> [cskim] : [baud,quot] = 38400, 26
> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Memory: 63MB = 63MB total
> Memory: 56448KB available (980K code, 248K data, 68K
> init)-------------------------->"HERE KERNEL STUCK"
> 
> 
> 
> 
> Can anybody help me? I am a beginer on this type of work

In general, you should post questions concerning ARM systems on
the linux-arm-kernel mailing list. See http://www.arm.linux.org.uk/ for
details.

And, as a hint, you should use a more descriptive subject for your
mail ;-)

Hans


> 
> 
> 
> Thanks in advance!
> 
> Regards
> Manoj Khandelwal
> Software Engineer
>