LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jolly Shah <jolly.shah@xilinx.com>
To: <mturquette@baylibre.com>, <sboyd@codeaurora.org>,
	<michal.simek@xilinx.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <linux-clk@vger.kernel.org>
Cc: <rajanv@xilinx.com>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, Jolly Shah <jollys@xilinx.com>,
	Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Subject: [PATCH 2/3] dt-bindings: clock: Add bindings for ZynqMP clock driver
Date: Wed, 28 Feb 2018 14:27:40 -0800	[thread overview]
Message-ID: <1519856861-31384-3-git-send-email-jollys@xilinx.com> (raw)
In-Reply-To: <1519856861-31384-1-git-send-email-jollys@xilinx.com>

Add documentation to describe Xilinx ZynqMP clock driver
bindings.

Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
---
 .../devicetree/bindings/clock/xlnx,zynqmp-clk.txt  | 163 +++++++++++++++++++++
 1 file changed, 163 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt

diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
new file mode 100644
index 0000000..d590330
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
@@ -0,0 +1,163 @@
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC
+
+The Zynq Ultrascale+ MPSoC has several different clk providers,
+each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+== Clock Controller ==
+The clock controller is a logical abstraction of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+Required properties:
+ - #clock-cells : Must be 1
+ - compatible : "xlnx,zynqmp-clk"
+ - clocks : list of clock specifiers which are external input clocks to the
+	    given clock controller. Please refer the next section to find
+	    the input clocks for a given controller.
+ - clock-names : list of names of clocks which are exteral input clocks to the
+		 given clock controller. Please refer to the clock bindings
+		 for more details
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs.
+These required clock inputs are the
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source.
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX		# with XX = 00..77
+ - mio_clk_50_or_51	#for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks for zynqmp Ultrascale+ clock controller:
+Output clocks are registered based on clock information received from firmware.
+Output clock indexes are mentioned below:
+
+Clock ID:	Output clock name:
+-------------------------------------
+0		iopll
+1		rpll
+2		apll
+3		dpll
+4		vpll
+5		iopll_to_fpd
+6		rpll_to_fpd
+7		apll_to_lpd
+8		dpll_to_lpd
+9		vpll_to_lpd
+10		acpu
+11		acpu_half
+12		dbf_fpd
+13		dbf_lpd
+14		dbg_trace
+15		dbg_tstmp
+16		dp_video_ref
+17		dp_audio_ref
+18		dp_stc_ref
+19		gdma_ref
+20		dpdma_ref
+21		ddr_ref
+22		sata_ref
+23		pcie_ref
+24		gpu_ref
+25		gpu_pp0_ref
+26		gpu_pp1_ref
+27		topsw_main
+28		topsw_lsbus
+29		gtgref0_ref
+30		lpd_switch
+31		lpd_lsbus
+32		usb0_bus_ref
+33		usb1_bus_ref
+34		usb3_dual_ref
+35		usb0
+36		usb1
+37		cpu_r5
+38		cpu_r5_core
+39		csu_spb
+40		csu_pll
+41		pcap
+42		iou_switch
+43		gem_tsu_ref
+44		gem_tsu
+45		gem0_ref
+46		gem1_ref
+47		gem2_ref
+48		gem3_ref
+49		gem0_tx
+50		gem1_tx
+51		gem2_tx
+52		gem3_tx
+53		qspi_ref
+54		sdio0_ref
+55		sdio1_ref
+56		uart0_ref
+57		uart1_ref
+58		spi0_ref
+59		spi1_ref
+60		nand_ref
+61		i2c0_ref
+62		i2c1_ref
+63		can0_ref
+64		can1_ref
+65		can0
+66		can1
+67		dll_ref
+68		adma_ref
+69		timestamp_ref
+70		ams_ref
+71		pl0_ref
+72		pl1_ref
+73		pl2_ref
+74		pl3_ref
+75		wdt
+76		iopll_int
+77		iopll_pre_src
+78		iopll_half
+79		iopll_int_mux
+80		iopll_post_src
+81		rpll_int
+82		rpll_pre_src
+83		rpll_half
+84		rpll_int_mux
+85		rpll_post_src
+86		apll_int
+87		apll_pre_src
+88		apll_half
+89		apll_int_mux
+90		apll_post_src
+91		dpll_int
+92		dpll_pre_src
+93		dpll_half
+94		dpll_int_mux
+95		dpll_post_src
+96		vpll_int
+97		vpll_pre_src
+98		vpll_half
+99		vpll_int_mux
+100		vpll_post_src
+101		can0_mio
+102		can1_mio
+
+Example:
+
+clk: clk {
+	#clock-cells = <1>;
+	compatible = "xlnx,zynqmp-clk";
+	clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
+	clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"
+};
-- 
2.7.4

  parent reply	other threads:[~2018-02-28 22:28 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-28 22:27 [PATCH 0/3] drivers: clk: Add ZynqMp clock driver support Jolly Shah
2018-02-28 22:27 ` [PATCH 1/3] drivers: clk: Add clk_get_children support Jolly Shah
2018-03-19 18:21   ` Stephen Boyd
2018-03-20 19:29     ` Jolly Shah
2018-02-28 22:27 ` Jolly Shah [this message]
2018-03-06  1:45   ` [PATCH 2/3] dt-bindings: clock: Add bindings for ZynqMP clock driver Rob Herring
2018-03-07 22:47     ` Jolly Shah
2018-03-08  1:20       ` Rob Herring
2018-03-13 18:39         ` Jolly Shah
2018-03-19 18:23           ` Stephen Boyd
2018-03-20 19:15             ` Jolly Shah
2018-02-28 22:27 ` [PATCH 3/3] drivers: clk: Add " Jolly Shah
2018-03-03  3:32   ` kbuild test robot
2018-03-05 10:37     ` Sudeep Holla
2018-03-19 20:09   ` Stephen Boyd
2018-03-21 19:59     ` Jolly Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519856861-31384-3-git-send-email-jollys@xilinx.com \
    --to=jolly.shah@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jollys@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michal.simek@xilinx.com \
    --cc=mturquette@baylibre.com \
    --cc=rajanv@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=shubhrajyoti.datta@xilinx.com \
    --subject='Re: [PATCH 2/3] dt-bindings: clock: Add bindings for ZynqMP clock driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).