LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Manu Gautam <mgautam@codeaurora.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-msm@vger.kernel.org,
Manu Gautam <mgautam@codeaurora.org>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-kernel@vger.kernel.org (open list:GENERIC PHY FRAMEWORK)
Subject: [PATCH 6/6] phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845
Date: Fri, 16 Mar 2018 15:14:59 +0530 [thread overview]
Message-ID: <1521193500-4696-7-git-send-email-mgautam@codeaurora.org> (raw)
In-Reply-To: <1521193500-4696-1-git-send-email-mgautam@codeaurora.org>
There are two QUSB2 PHYs present on sdm845. Update PHY
registers programming for both the PHYs related to
electrical parameters to improve eye diagram.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 39 +++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 40fdef8..1a608a9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -174,6 +174,27 @@ enum qusb2phy_reg_layout {
QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
};
+static const struct qusb2_phy_init_tbl sdm845_init_tbl_1[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x8),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x45),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
+};
+
struct qusb2_phy_cfg {
const struct qusb2_phy_init_tbl *tbl;
/* number of entries in the table */
@@ -220,6 +241,18 @@ struct qusb2_phy_cfg {
.autoresume_en = BIT(0),
};
+static const struct qusb2_phy_cfg sdm845_phy_cfg_1 = {
+ .tbl = sdm845_init_tbl_1,
+ .tbl_num = ARRAY_SIZE(sdm845_init_tbl_1),
+ .regs = qusb2_v2_regs_layout,
+
+ .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
+ POWER_DOWN),
+ .mask_core_ready = CORE_READY_STATUS,
+ .has_pll_override = true,
+ .autoresume_en = BIT(0),
+};
+
static const char * const qusb2_phy_vreg_names[] = {
"vdda-pll", "vdda-phy-dpdm",
};
@@ -649,6 +682,12 @@ static int qusb2_phy_exit(struct phy *phy)
}, {
.compatible = "qcom,qusb2-v2-phy",
.data = &qusb2_v2_phy_cfg,
+ }, {
+ .compatible = "qcom,sdm845-1-qusb2-phy",
+ .data = &sdm845_phy_cfg_1,
+ }, {
+ .compatible = "qcom,sdm845-2-qusb2-phy",
+ .data = &qusb2_v2_phy_cfg,
},
{ },
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
prev parent reply other threads:[~2018-03-16 9:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1521193500-4696-1-git-send-email-mgautam@codeaurora.org>
2018-03-16 9:44 ` [PATCH 1/6] phy: qcom-qmp: Enable pipe_clk before checking USB3 PHY_STATUS Manu Gautam
2018-03-16 9:44 ` [PATCH 2/6] phy: qcom-qusb2: Fix crash if nvmem cell not specified Manu Gautam
2018-03-20 10:12 ` Vivek Gautam
2018-03-16 9:44 ` [PATCH 3/6] dt-bindings: phy-qcom-qmp: Update bindings for sdm845 Manu Gautam
2018-03-18 12:52 ` Rob Herring
2018-03-16 9:44 ` [PATCH 4/6] phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support " Manu Gautam
2018-03-19 17:51 ` Evan Green
2018-03-20 6:59 ` Manu Gautam
2018-03-20 16:36 ` Evan Green
2018-03-16 9:44 ` [PATCH 5/6] dt-bindings: phy-qcom-usb2: Update bindings " Manu Gautam
2018-03-18 12:52 ` Rob Herring
2018-03-19 4:41 ` Manu Gautam
2018-03-20 10:23 ` Vivek Gautam
2018-03-20 10:42 ` Manu Gautam
2018-03-16 9:44 ` Manu Gautam [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521193500-4696-7-git-send-email-mgautam@codeaurora.org \
--to=mgautam@codeaurora.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sboyd@codeaurora.org \
--cc=vivek.gautam@codeaurora.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
--subject='Re: [PATCH 6/6] phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).