* [PATCH 1/4] ARM: dts: stm32: add timers support to stm32mp157c
2018-04-17 13:45 [PATCH 0/4] Add STM32 timers to stm32mp157c Fabrice Gasnier
@ 2018-04-17 13:45 ` Fabrice Gasnier
2018-04-17 13:45 ` [PATCH 2/4] ARM: dts: stm32: add PWM pins used on stm32mp157c-ev1 board Fabrice Gasnier
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Fabrice Gasnier @ 2018-04-17 13:45 UTC (permalink / raw)
To: alexandre.torgue, robh+dt
Cc: mcoquelin.stm32, mark.rutland, devicetree, linux-arm-kernel,
linux-kernel, fabrice.gasnier
Add PWM and trigger support to stm32mp157c.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 283 +++++++++++++++++++++++++++++++++++++
1 file changed, 283 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index bc3eddc..115ec73 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -104,6 +104,185 @@
interrupt-parent = <&intc>;
ranges;
+ timers2: timer@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc TIM2_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ timers3: timer@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc TIM3_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ timers4: timer@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc TIM4_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
+ timers5: timer@40003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40003000 0x400>;
+ clocks = <&rcc TIM5_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
+ timers6: timer@40004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40004000 0x400>;
+ clocks = <&rcc TIM6_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timers7: timer@40005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40005000 0x400>;
+ clocks = <&rcc TIM7_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@40007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40007000 0x400>;
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@40008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40008000 0x400>;
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
usart2: serial@4000e000 {
compatible = "st,stm32h7-uart";
reg = <0x4000e000 0x400>;
@@ -152,6 +331,48 @@
status = "disabled";
};
+ timers1: timer@44000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44000000 0x400>;
+ clocks = <&rcc TIM1_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timer@44001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44001000 0x400>;
+ clocks = <&rcc TIM8_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
usart6: serial@44003000 {
compatible = "st,stm32h7-uart";
reg = <0x44003000 0x400>;
@@ -160,6 +381,68 @@
status = "disabled";
};
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@44007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44007000 0x400>;
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@44008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44008000 0x400>;
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
rcc: rcc@50000000 {
compatible = "st,stm32mp1-rcc", "syscon";
reg = <0x50000000 0x1000>;
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/4] ARM: dts: stm32: add PWM pins used on stm32mp157c-ev1 board
2018-04-17 13:45 [PATCH 0/4] Add STM32 timers to stm32mp157c Fabrice Gasnier
2018-04-17 13:45 ` [PATCH 1/4] ARM: dts: stm32: add timers support " Fabrice Gasnier
@ 2018-04-17 13:45 ` Fabrice Gasnier
2018-04-17 13:45 ` [PATCH 3/4] ARM: dts: stm32: add PWM and triggers " Fabrice Gasnier
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Fabrice Gasnier @ 2018-04-17 13:45 UTC (permalink / raw)
To: alexandre.torgue, robh+dt
Cc: mcoquelin.stm32, mark.rutland, devicetree, linux-arm-kernel,
linux-kernel, fabrice.gasnier
stm32mp157c evaluation board has following PWM pins available on GPIO
expansion connector:
- TIM2_CH4 (PA3)
- TIM8_CH4 (PI2)
- TIM12_CH1 (PH6)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 6f044100..867cfeb 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -158,6 +158,33 @@
bias-disable;
};
};
+
+ pwm2_pins_a: pwm2@0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_pins_a: pwm8@0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_pins_a: pwm12@0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
};
pinctrl_z: pin-controller-z {
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread