LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Yossi Mansharoff <yossim@codeaurora.org>
To: Peter Chen <Peter.Chen@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org (open list:CHIPIDEA USB HIGH SPEED
	DUAL ROLE CONTROLLER), linux-kernel@vger.kernel.org (open list)
Cc: robh@kernel.org, swboyd@chromium.org,
	Yossi Mansharoff <yossim@codeaurora.org>,
	Peter Rosin <peda@axentia.se>, Peter Chen <peter.chen@nxp.com>,
	<devicetree@vger.kernel.org>,
	Stephen Boyd <stephen.boyd@linaro.org>
Subject: [PATCH v2] usb: chipidea: Hook into mux framework to toggle usb switch
Date: Tue, 17 Apr 2018 16:52:28 +0300	[thread overview]
Message-ID: <1523973148-2094-1-git-send-email-yossim@codeaurora.org> (raw)

On the db410c 96boards platform we have a TC7USB40MU on the board
to mux the D+/D- lines coming from the controller between a micro
usb "device" port and a USB hub for "host" roles[1]. During a
role switch, we need to toggle this mux to forward the D+/D-
lines to either the port or the hub. Add the necessary code to do
the role switch in chipidea core via the generic mux framework.
Board configurations like on db410c are expected to change roles
via the sysfs API described in
Documentation/ABI/testing/sysfs-platform-chipidea-usb2.

[1] https://github.com/96boards/documentation/raw/master/ConsumerEdition/DragonBoard-410c/HardwareDocs/Schematics_DragonBoard.pdf

Cc: Peter Rosin <peda@axentia.se>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>

Signed-off-by: Yossi Mansharoff <yossim@codeaurora.org>
---
 drivers/usb/chipidea/Kconfig |  2 ++
 drivers/usb/chipidea/core.c  |  5 +++++
 drivers/usb/chipidea/host.c  |  7 +++++++
 drivers/usb/chipidea/udc.c   | 13 ++++++++++++-
 include/linux/usb/chipidea.h |  2 ++
 5 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 785f0ed..6a8e635 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -3,6 +3,8 @@ config USB_CHIPIDEA
 	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
 	select EXTCON
 	select RESET_CONTROLLER
+	select MULTIPLEXER
+	select MUX_GPIO
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on ChipIdea silicon IP. It supports:
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 33ae87f..8fa0991 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -61,6 +61,7 @@
 #include <linux/of.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/ehci_def.h>
+#include <linux/mux/consumer.h>
 
 #include "ci.h"
 #include "udc.h"
@@ -687,6 +688,10 @@ static int ci_get_platdata(struct device *dev,
 	if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
 		platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
 
+	platdata->usb_switch = devm_mux_control_get_optional(dev, "usb_switch");
+	if (IS_ERR(platdata->usb_switch))
+		return PTR_ERR(platdata->usb_switch);
+
 	ext_id = ERR_PTR(-ENODEV);
 	ext_vbus = ERR_PTR(-ENODEV);
 	if (of_property_read_bool(dev->of_node, "extcon")) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index af45aa32..d9d2d00 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -13,6 +13,7 @@
 #include <linux/usb/hcd.h>
 #include <linux/usb/chipidea.h>
 #include <linux/regulator/consumer.h>
+#include <linux/mux/consumer.h>
 
 #include "../host/ehci.h"
 
@@ -161,6 +162,10 @@ static int host_start(struct ci_hdrc *ci)
 		if (ci_otg_is_fsm_mode(ci)) {
 			otg->host = &hcd->self;
 			hcd->self.otg_port = 1;
+		} else {
+			ret = mux_control_select(ci->platdata->usb_switch, 1);
+			if (ret)
+				goto disable_reg;
 		}
 	}
 
@@ -181,6 +186,8 @@ static void host_stop(struct ci_hdrc *ci)
 	struct usb_hcd *hcd = ci->hcd;
 
 	if (hcd) {
+		if (!ci_otg_is_fsm_mode(ci))
+			mux_control_deselect(ci->platdata->usb_switch);
 		if (ci->platdata->notify_event)
 			ci->platdata->notify_event(ci,
 				CI_HDRC_CONTROLLER_STOPPED_EVENT);
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 9852ec5..209d3f6 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -19,6 +19,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg-fsm.h>
 #include <linux/usb/chipidea.h>
+#include <linux/mux/consumer.h>
 
 #include "ci.h"
 #include "udc.h"
@@ -1965,16 +1966,26 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
 
 static int udc_id_switch_for_device(struct ci_hdrc *ci)
 {
+	int ret = 0;
+
 	if (ci->is_otg)
 		/* Clear and enable BSV irq */
 		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
 					OTGSC_BSVIS | OTGSC_BSVIE);
 
-	return 0;
+	if (!ci_otg_is_fsm_mode(ci))
+		ret = mux_control_select(ci->platdata->usb_switch, 0);
+
+	if (ci->is_otg && ret)
+		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
+
+	return ret;
 }
 
 static void udc_id_switch_for_host(struct ci_hdrc *ci)
 {
+	mux_control_deselect(ci->platdata->usb_switch);
+
 	/*
 	 * host doesn't care B_SESSION_VALID event
 	 * so clear and disbale BSV irq
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 07f9936..9ea55a1 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -10,6 +10,7 @@
 #include <linux/usb/otg.h>
 
 struct ci_hdrc;
+struct mux_control;
 
 /**
  * struct ci_hdrc_cable - structure for external connector cable state tracking
@@ -76,6 +77,7 @@ struct ci_hdrc_platform_data {
 	/* VBUS and ID signal state tracking, using extcon framework */
 	struct ci_hdrc_cable		vbus_extcon;
 	struct ci_hdrc_cable		id_extcon;
+	struct mux_control		*usb_switch;
 	u32			phy_clkgate_delay_us;
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply	other threads:[~2018-04-17 13:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-17 13:52 Yossi Mansharoff [this message]
2018-04-17 14:11 ` Peter Rosin
2018-04-18  5:48   ` yossim
2018-05-14  7:21     ` Peter Rosin
2018-04-20  2:00 ` Peter Chen
2018-04-20  7:30   ` Peter Rosin
2018-04-20  9:22     ` Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1523973148-2094-1-git-send-email-yossim@codeaurora.org \
    --to=yossim@codeaurora.org \
    --cc=Peter.Chen@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=robh@kernel.org \
    --cc=stephen.boyd@linaro.org \
    --cc=swboyd@chromium.org \
    --subject='Re: [PATCH v2] usb: chipidea: Hook into mux framework to toggle usb switch' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).