LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: architt@codeaurora.org, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com, airlied@linux.ie,
	vladimir_zapolskiy@mentor.com, horms@verge.net.au,
	magnus.damm@gmail.com, geert@linux-m68k.org,
	niklas.soderlund@ragnatech.se,
	sergei.shtylyov@cogentembedded.com, robh+dt@kernel.org,
	mark.rutland@arm.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver
Date: Wed, 18 Apr 2018 16:40:29 +0200	[thread overview]
Message-ID: <1524062429-325-3-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1524062429-325-1-git-send-email-jacopo+renesas@jmondi.org>

Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
output converter.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/bridge/Kconfig        |   6 +
 drivers/gpu/drm/bridge/Makefile       |   1 +
 drivers/gpu/drm/bridge/thc63lvd1024.c | 206 ++++++++++++++++++++++++++++++++++
 3 files changed, 213 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 3aa65bd..42c9c2d 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -93,6 +93,12 @@ config DRM_SII9234
 	  It is an I2C driver, that detects connection of MHL bridge
 	  and starts encapsulation of HDMI signal.
 
+config DRM_THINE_THC63LVD1024
+	tristate "Thine THC63LVD1024 LVDS decoder bridge"
+	depends on OF
+	---help---
+	  Thine THC63LVD1024 LVDS/parallel converter driver.
+
 config DRM_TOSHIBA_TC358767
 	tristate "Toshiba TC358767 eDP bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 373eb28..fd90b16 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_SII9234) += sii9234.o
+obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
new file mode 100644
index 0000000..c8b9edd
--- /dev/null
+++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * THC63LVD1024 LVDS to parallel data DRM bridge driver.
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+enum thc63_ports {
+	THC63_LVDS_IN0,
+	THC63_LVDS_IN1,
+	THC63_RGB_OUT0,
+	THC63_RGB_OUT1,
+};
+
+struct thc63_dev {
+	struct device *dev;
+
+	struct regulator *vcc;
+
+	struct gpio_desc *pdwn;
+	struct gpio_desc *oe;
+
+	struct drm_bridge bridge;
+	struct drm_bridge *next;
+};
+
+static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct thc63_dev, bridge);
+}
+
+static int thc63_attach(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+
+	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
+}
+
+static void thc63_enable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	ret = regulator_enable(thc63->vcc);
+	if (ret) {
+		dev_err(thc63->dev,
+			"Failed to enable regulator \"vcc\": %d\n", ret);
+		return;
+	}
+
+	gpiod_set_value(thc63->pdwn, 0);
+	gpiod_set_value(thc63->oe, 1);
+}
+
+static void thc63_disable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	gpiod_set_value(thc63->oe, 0);
+	gpiod_set_value(thc63->pdwn, 1);
+
+	ret = regulator_disable(thc63->vcc);
+	if (ret)
+		dev_err(thc63->dev,
+			"Failed to disable regulator \"vcc\": %d\n", ret);
+}
+
+static const struct drm_bridge_funcs thc63_bridge_func = {
+	.attach	= thc63_attach,
+	.enable = thc63_enable,
+	.disable = thc63_disable,
+};
+
+static int thc63_parse_dt(struct thc63_dev *thc63)
+{
+	struct device_node *thc63_out;
+	struct device_node *remote;
+
+	thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
+						  THC63_RGB_OUT0, -1);
+	if (!thc63_out) {
+		dev_err(thc63->dev, "Missing endpoint in port@%u\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	remote = of_graph_get_remote_port_parent(thc63_out);
+	of_node_put(thc63_out);
+	if (!remote) {
+		dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	if (!of_device_is_available(remote)) {
+		dev_err(thc63->dev, "port@%u remote endpoint is disabled\n",
+			THC63_RGB_OUT0);
+		of_node_put(remote);
+		return -ENODEV;
+	}
+
+	thc63->next = of_drm_find_bridge(remote);
+	of_node_put(remote);
+	if (!thc63->next)
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
+static int thc63_gpio_init(struct thc63_dev *thc63)
+{
+	thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW);
+	if (IS_ERR(thc63->oe)) {
+		dev_err(thc63->dev, "Unable to get \"oe-gpios\": %ld\n",
+			PTR_ERR(thc63->oe));
+		return PTR_ERR(thc63->oe);
+	}
+
+	thc63->pdwn = devm_gpiod_get_optional(thc63->dev, "powerdown",
+					      GPIOD_OUT_HIGH);
+	if (IS_ERR(thc63->pdwn)) {
+		dev_err(thc63->dev, "Unable to get \"powerdown-gpios\": %ld\n",
+			PTR_ERR(thc63->pdwn));
+		return PTR_ERR(thc63->pdwn);
+	}
+
+	return 0;
+}
+
+static int thc63_probe(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63;
+	int ret;
+
+	thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
+	if (!thc63)
+		return -ENOMEM;
+
+	thc63->dev = &pdev->dev;
+	platform_set_drvdata(pdev, thc63);
+
+	thc63->vcc = devm_regulator_get_optional(thc63->dev, "vcc");
+	if (IS_ERR(thc63->vcc)) {
+		if (PTR_ERR(thc63->vcc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(thc63->dev, "Unable to get \"vcc\" supply: %ld\n",
+			PTR_ERR(thc63->vcc));
+		return PTR_ERR(thc63->vcc);
+	}
+
+	ret = thc63_gpio_init(thc63);
+	if (ret)
+		return ret;
+
+	ret = thc63_parse_dt(thc63);
+	if (ret)
+		return ret;
+
+	thc63->bridge.driver_private = thc63;
+	thc63->bridge.of_node = pdev->dev.of_node;
+	thc63->bridge.funcs = &thc63_bridge_func;
+
+	drm_bridge_add(&thc63->bridge);
+
+	return 0;
+}
+
+static int thc63_remove(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63 = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&thc63->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id thc63_match[] = {
+	{ .compatible = "thine,thc63lvd1024", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, thc63_match);
+
+static struct platform_driver thc63_driver = {
+	.probe	= thc63_probe,
+	.remove	= thc63_remove,
+	.driver	= {
+		.name		= "thc63lvd1024",
+		.of_match_table	= thc63_match,
+	},
+};
+module_platform_driver(thc63_driver);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
+MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

  parent reply	other threads:[~2018-04-18 14:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20180418144054epcas5p3ec7816f76cd84d4c429b47e23331ee7d@epcas5p3.samsung.com>
2018-04-18 14:40 ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
2018-04-18 14:40   ` [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
2018-04-20  6:19     ` Vladimir Zapolskiy
2018-04-18 14:40   ` Jacopo Mondi [this message]
2018-04-20  6:20     ` [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Vladimir Zapolskiy
2018-04-20  9:18   ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Andrzej Hajda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1524062429-325-3-git-send-email-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=vladimir_zapolskiy@mentor.com \
    --subject='Re: [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).