LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Anson Huang <Anson.Huang@nxp.com>
To: shawnguo@kernel.org, kernel@pengutronix.de,
	fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
	mturquette@baylibre.com, sboyd@kernel.org, shengjiu.wang@nxp.com
Cc: Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org
Subject: [PATCH V3 2/2] ARM: dts: imx6sx-sabreauto: add external 24MHz clock source
Date: Fri, 20 Apr 2018 15:38:11 +0800	[thread overview]
Message-ID: <1524209891-14146-2-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1524209891-14146-1-git-send-email-Anson.Huang@nxp.com>

On i.MX6SX SabreAuto board, there is external 24MHz clock
source for analog clock2, add this clock source to clock tree
and remove "clocks" container for all input clocks.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	remove "clocks" container and use new way for all input clocks definition.
 arch/arm/boot/dts/imx6sx-sabreauto.dts |  4 ++
 arch/arm/boot/dts/imx6sx.dtsi          | 71 ++++++++++++++++++----------------
 2 files changed, 42 insertions(+), 33 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 72da5ac..57d1ea0 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -37,6 +37,10 @@
 	};
 };
 
+&anaclk2 {
+	clock-frequency = <24576000>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 49c7205..7e463d2 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -104,41 +104,46 @@
 		interrupt-parent = <&intc>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
 
-		ckil: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "ckil";
-		};
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
 
-		osc: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc";
-		};
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
 
-		ipp_di0: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "ipp_di0";
-		};
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
 
-		ipp_di1: clock@3 {
-			compatible = "fixed-clock";
-			reg = <3>;
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "ipp_di1";
-		};
+	anaclk1: clock-anaclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk1";
+	};
+
+	anaclk2: clock-anaclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk2";
 	};
 
 	tempmon: tempmon {
@@ -575,8 +580,8 @@
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
 			};
 
 			anatop: anatop@20c8000 {
-- 
2.7.4

  reply	other threads:[~2018-04-20  7:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-20  7:38 [PATCH V3 1/2] clk: imx6sx: add missing lvds2 clock to the clock tree Anson Huang
2018-04-20  7:38 ` Anson Huang [this message]
2018-05-02 13:19   ` [PATCH V3 2/2] ARM: dts: imx6sx-sabreauto: add external 24MHz clock source Shawn Guo
2018-05-02 13:15 ` [PATCH V3 1/2] clk: imx6sx: add missing lvds2 clock to the clock tree Shawn Guo
2018-05-05  2:57 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1524209891-14146-2-git-send-email-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=shengjiu.wang@nxp.com \
    --subject='Re: [PATCH V3 2/2] ARM: dts: imx6sx-sabreauto: add external 24MHz clock source' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).