LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Anson Huang <Anson.Huang@nxp.com>
To: shawnguo@kernel.org, kernel@pengutronix.de,
	fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] ARM: dts: imx6sx-sabreauto: add fec support
Date: Mon, 23 Apr 2018 11:46:58 +0800	[thread overview]
Message-ID: <1524455219-6736-4-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1524455219-6736-1-git-send-email-Anson.Huang@nxp.com>

Add FEC support on i.MX6SX Sabre Auto board.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx6sx-sabreauto.dts | 70 ++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 812f40b..eadd483 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -41,6 +41,40 @@
 	clock-frequency = <24576000>;
 };
 
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1_1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-assert-gpios = <&max7322 0 GPIO_ACTIVE_HIGH>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2_1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -75,6 +109,42 @@
 &iomuxc {
 	imx6x-sabreauto {
 
+		pinctrl_enet1_1: enet1grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO        0xa0b1
+				MX6SX_PAD_ENET1_MDC__ENET1_MDC          0xa0b1
+				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC   0xa0b9
+				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0   0xa0b1
+				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1   0xa0b1
+				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2   0xa0b1
+				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3   0xa0b1
+				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN    0xa0b1
+				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK      0x3081
+				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0   0x3081
+				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1   0x3081
+				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2   0x3081
+				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3   0x3081
+				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN    0x3081
+			>;
+		};
+
+		pinctrl_enet2_1: enet2grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC   0xa0b9
+				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0   0xa0b1
+				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1   0xa0b1
+				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2   0xa0b1
+				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3   0xa0b1
+				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN    0xa0b1
+				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK      0x3081
+				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0   0x3081
+				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1   0x3081
+				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2   0x3081
+				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3   0x3081
+				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN    0x3081
+			>;
+		};
+
 		pinctrl_i2c2_1: i2c2grp-1 {
 			fsl,pins = <
 				MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1
-- 
2.7.4

  parent reply	other threads:[~2018-04-23  3:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-23  3:46 [PATCH 1/5] ARM: dts: imx6sx-sabreauto: add PMIC support Anson Huang
2018-04-23  3:46 ` [PATCH 2/5] ARM: dts: imx6sx-sabreauto: add max7322 IO expander support Anson Huang
2018-04-23  3:46 ` [PATCH 3/5] ARM: dts: imx6sx-sabreauto: add IO expander max7310 support Anson Huang
2018-04-23  3:46 ` Anson Huang [this message]
2018-04-23 11:08   ` [PATCH 4/5] ARM: dts: imx6sx-sabreauto: add fec support Fabio Estevam
2018-04-24  2:09     ` Anson Huang
2018-04-24 12:22       ` Fabio Estevam
2018-04-25  3:30         ` Anson Huang
2018-04-25  5:36           ` Anson Huang
2018-04-25 13:46             ` Fabio Estevam
2018-04-26  6:57               ` Anson Huang
2018-04-26 17:28                 ` Fabio Estevam
2018-04-27  1:37                   ` Anson Huang
2018-04-27  2:12                     ` Anson Huang
2018-05-04  8:45                 ` Shawn Guo
2018-04-23  3:46 ` [PATCH 5/5] ARM: dts: imx6sx-sabreauto: add wdog external reset support Anson Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1524455219-6736-4-git-send-email-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --subject='Re: [PATCH 4/5] ARM: dts: imx6sx-sabreauto: add fec support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).