LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [v4 0/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver
@ 2018-04-24 12:23 Taniya Das
  2018-04-24 12:23 ` [v4 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings Taniya Das
  2018-04-24 12:23 ` [v4 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
  0 siblings, 2 replies; 6+ messages in thread
From: Taniya Das @ 2018-04-24 12:23 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Odelu Kukatla,
	Amit Nischal, linux-arm-msm, linux-soc, linux-clk, linux-kernel,
	devicetree, Taniya Das

 [v4]
  * Addressed comments from Stephen

 [v3]
  * Addressed documentation & code review comments from Bjorn
  * Addressed bindings comments from Rob
  * Updated the patch series order for bindings

 [v2]
  * Addressed comments from Stephen
  * Addressed comments from Evan

This patch series adds a driver and device tree documentation binding
for the clock control via Resource Power Manager-hardened (RPMh) on some
Qualcomm Technologies, Inc, SoCs such as SDM845. The clock RPMh driver
would send requests for the RPMh managed clock resources.

The RPMh clock driver depends upon the RPMh driver [1] and command DB
driver [2] which are both still undergoing review.

Thanks,
Taniya

[1]: https://lkml.org/lkml/2018/3/9/979
[2]: https://lkml.org/lkml/2018/3/14/787


Taniya Das (2):
  dt-bindings: clock: Introduce QCOM RPMh clock bindings
  clk: qcom: clk-rpmh: Add QCOM RPMh clock driver

 .../devicetree/bindings/clock/qcom,rpmh-clk.txt    |  22 ++
 drivers/clk/qcom/Kconfig                           |   9 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-rpmh.c                        | 364 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,rpmh.h              |  24 ++
 5 files changed, 420 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
 create mode 100644 drivers/clk/qcom/clk-rpmh.c
 create mode 100644 include/dt-bindings/clock/qcom,rpmh.h

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [v4 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings
  2018-04-24 12:23 [v4 0/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
@ 2018-04-24 12:23 ` Taniya Das
  2018-04-26 23:40   ` Stephen Boyd
  2018-04-24 12:23 ` [v4 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
  1 sibling, 1 reply; 6+ messages in thread
From: Taniya Das @ 2018-04-24 12:23 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Odelu Kukatla,
	Amit Nischal, linux-arm-msm, linux-soc, linux-clk, linux-kernel,
	devicetree, Taniya Das

Add RPMh clock device bindings for Qualcomm Technology Inc's SoCs. These
devices would be used for communicating resource state requests to control
the clocks managed by RPMh.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/clock/qcom,rpmh-clk.txt    | 22 ++++++++++++++++++++
 include/dt-bindings/clock/qcom,rpmh.h              | 24 ++++++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
 create mode 100644 include/dt-bindings/clock/qcom,rpmh.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
new file mode 100644
index 0000000..3c00765
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
@@ -0,0 +1,22 @@
+Qualcomm Technologies, Inc. RPMh Clocks
+-------------------------------------------------------
+
+Resource Power Manager Hardened (RPMh) manages shared resources on
+some Qualcomm Technologies Inc. SoCs. It accepts clock requests from
+other hardware subsystems via RSC to control clocks.
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-rpmh-clk"
+
+- #clock-cells : must contain 1
+
+Example :
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+
+	&apps_rsc {
+		rpmhcc: clock-controller {
+			compatible = "qcom,sdm845-rpmh-clk";
+			#clock-cells = <1>;
+		};
+	};
diff --git a/include/dt-bindings/clock/qcom,rpmh.h b/include/dt-bindings/clock/qcom,rpmh.h
new file mode 100644
index 0000000..36caab2
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,rpmh.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+
+#ifndef _DT_BINDINGS_CLK_MSM_RPMH_H
+#define _DT_BINDINGS_CLK_MSM_RPMH_H
+
+/* RPMh controlled clocks */
+#define RPMH_CXO_CLK				0
+#define RPMH_CXO_CLK_A				1
+#define RPMH_LN_BB_CLK2				2
+#define RPMH_LN_BB_CLK2_A			3
+#define RPMH_LN_BB_CLK3				4
+#define RPMH_LN_BB_CLK3_A			5
+#define RPMH_RF_CLK1				6
+#define RPMH_RF_CLK1_A				7
+#define RPMH_RF_CLK2				8
+#define RPMH_RF_CLK2_A				9
+#define RPMH_RF_CLK3				10
+#define RPMH_RF_CLK3_A				11
+#define RPMH_RF_CLK4				12
+#define RPMH_RF_CLK4_A				13
+
+#endif
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [v4 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver
  2018-04-24 12:23 [v4 0/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
  2018-04-24 12:23 ` [v4 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings Taniya Das
@ 2018-04-24 12:23 ` Taniya Das
  2018-04-26 23:40   ` Stephen Boyd
  1 sibling, 1 reply; 6+ messages in thread
From: Taniya Das @ 2018-04-24 12:23 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Odelu Kukatla,
	Amit Nischal, linux-arm-msm, linux-soc, linux-clk, linux-kernel,
	devicetree, Taniya Das

Add the RPMh clock driver to control the RPMh managed clock resources on
some of the Qualcomm Technologies, Inc. SoCs.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/Kconfig    |   9 ++
 drivers/clk/qcom/Makefile   |   1 +
 drivers/clk/qcom/clk-rpmh.c | 364 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)
 create mode 100644 drivers/clk/qcom/clk-rpmh.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index fbf4532..9c2ef0b 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -59,6 +59,15 @@ config QCOM_CLK_SMD_RPM
 	  Say Y if you want to support the clocks exposed by the RPM on
 	  platforms such as apq8016, apq8084, msm8974 etc.

+config QCOM_CLK_RPMH
+	tristate "RPMh Clock Driver"
+	depends on COMMON_CLK_QCOM && QCOM_RPMH
+	help
+	 RPMh manages shared resources on some Qualcomm Technologies, Inc.
+	 SoCs. It accepts requests from other hardware subsystems via RSC.
+	 Say Y if you want to support the clocks exposed by RPMh on
+	 platforms such as SDM845.
+
 config APQ_GCC_8084
 	tristate "APQ8084 Global Clock Controller"
 	select QCOM_GDSC
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 230332c..b2b5babf 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -36,5 +36,6 @@ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
 obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
 obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
 obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
 obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
new file mode 100644
index 0000000..907a73f
--- /dev/null
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+
+#define CLK_RPMH_ARC_EN_OFFSET		0
+#define CLK_RPMH_VRM_EN_OFFSET		4
+
+/**
+ * struct clk_rpmh - individual rpmh clock data structure
+ * @hw:			handle between common and hardware-specific interfaces
+ * @res_name:		resource name for the rpmh clock
+ * @res_addr:		base address of the rpmh resource within the RPMh
+ * @res_en_offset:	clock resource enable offset corresponding to ARC or
+ *			VRM type clock
+ * @res_on_val:		rpmh clock enable value
+ * @res_off_val:	rpmh clock disable value
+ * @state:		rpmh clock requested state
+ * @aggr_state:		rpmh clock aggregated state
+ * @last_sent_aggr_state: rpmh clock last aggr state sent to RPMh
+ * @valid_state_mask:	mask to determine the state of the rpmh clock
+ * @rpmh_client:	handle used for rpmh communications
+ * @dev:		device to which it is attached
+ * @peer:		pointer to the clock rpmh sibling
+ * @rate:		rate of the rpmh clock
+ */
+struct clk_rpmh {
+	struct clk_hw hw;
+	const char *res_name;
+	u32 res_addr;
+	u32 res_en_offset;
+	u32 res_on_val;
+	u32 res_off_val;
+	u32 state;
+	u32 aggr_state;
+	u32 last_sent_aggr_state;
+	u32 valid_state_mask;
+	struct rpmh_client *rpmh_client;
+	struct device *dev;
+	struct clk_rpmh *peer;
+	unsigned long rate;
+};
+
+struct clk_rpmh_desc {
+	struct clk_hw **clks;
+	size_t num_clks;
+};
+
+static DEFINE_MUTEX(rpmh_clk_lock);
+
+#define __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name,	\
+			  _res_en_offset, _res_on, _res_off, _rate)	\
+	static struct clk_rpmh _platform##_##_name_active;		      \
+	static struct clk_rpmh _platform##_##_name = {			      \
+		.res_name = _res_name,					      \
+		.res_en_offset = _res_en_offset,			      \
+		.res_on_val = _res_on,					      \
+		.res_off_val = _res_off,				      \
+		.rate = _rate,						      \
+		.peer = &_platform##_##_name_active,			      \
+		.valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) |	      \
+				      BIT(RPMH_ACTIVE_ONLY_STATE) |           \
+				      BIT(RPMH_SLEEP_STATE)),		      \
+		.hw.init = &(struct clk_init_data){			      \
+			.ops = &clk_rpmh_ops,			              \
+			.name = #_name,					      \
+		},							      \
+	};								      \
+	static struct clk_rpmh _platform##_##_name_active = {		      \
+		.res_name = _res_name,					      \
+		.res_en_offset = _res_en_offset,			      \
+		.res_on_val = _res_on,					      \
+		.res_off_val = _res_off,				      \
+		.rate = _rate,						      \
+		.peer = &_platform##_##_name,				      \
+		.valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) |	      \
+					BIT(RPMH_ACTIVE_ONLY_STATE)),         \
+		.hw.init = &(struct clk_init_data){			      \
+			.ops = &clk_rpmh_ops,				      \
+			.name = #_name_active,				      \
+		},							      \
+	}
+
+#define DEFINE_CLK_RPMH_ARC(_platform, _name, _name_active, _res_name, \
+			    _res_on, _res_off, _rate) \
+	__DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name,	\
+			  CLK_RPMH_ARC_EN_OFFSET, _res_on, _res_off, _rate)
+
+#define DEFINE_CLK_RPMH_VRM(_platform, _name, _name_active, _res_name,	\
+			    _rate)					 \
+	__DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name,     \
+			  CLK_RPMH_VRM_EN_OFFSET, true, false, _rate)
+
+static inline struct clk_rpmh *to_clk_rpmh(struct clk_hw *_hw)
+{
+	return container_of(_hw, struct clk_rpmh, hw);
+}
+
+static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
+{
+	return (c->last_sent_aggr_state & BIT(state))
+		!= (c->aggr_state & BIT(state));
+}
+
+static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
+{
+	struct tcs_cmd cmd = { 0 };
+	u32 cmd_state, on_val;
+	enum rpmh_state state = RPMH_SLEEP_STATE;
+	int ret;
+
+	cmd.addr = c->res_addr + c->res_en_offset;
+	cmd_state = c->aggr_state;
+	on_val = c->res_on_val;
+
+	for (; state <= RPMH_ACTIVE_ONLY_STATE; state++) {
+		if (has_state_changed(c, state)) {
+			cmd.data = (cmd_state & BIT(state)) ? on_val : 0;
+			ret = rpmh_write_async(c->rpmh_client, state,
+						&cmd, 1);
+			if (ret) {
+				dev_err(c->dev, "set %s state of %s failed: (%d)\n",
+					(!state) ? "sleep" :
+					(state == RPMH_WAKE_ONLY_STATE)	?
+					"wake" : "active", c->res_name, ret);
+				return ret;
+			}
+		}
+	}
+
+	c->last_sent_aggr_state = c->aggr_state;
+	c->peer->last_sent_aggr_state =  c->last_sent_aggr_state;
+
+	return 0;
+}
+
+/*
+ * Update state and aggregate state values based on enable value.
+ */
+static int clk_rpmh_aggregate_state_send_command(struct clk_rpmh *c,
+						bool enable)
+{
+	int ret;
+
+	c->state = enable ? c->valid_state_mask : 0;
+	c->aggr_state = c->state | c->peer->state;
+	c->peer->aggr_state = c->aggr_state;
+
+	ret = clk_rpmh_send_aggregate_command(c);
+	if (ret && enable) {
+		c->state = 0;
+	} else if (ret) {
+		c->state = c->valid_state_mask;
+		WARN(1, "clk: %s failed to disable\n", c->res_name);
+	}
+
+	return ret;
+}
+
+static int clk_rpmh_prepare(struct clk_hw *hw)
+{
+	struct clk_rpmh *c = to_clk_rpmh(hw);
+	int ret = 0;
+
+	mutex_lock(&rpmh_clk_lock);
+
+	if (!c->state)
+		ret = clk_rpmh_aggregate_state_send_command(c, true);
+
+	mutex_unlock(&rpmh_clk_lock);
+	return ret;
+};
+
+static void clk_rpmh_unprepare(struct clk_hw *hw)
+{
+	struct clk_rpmh *c = to_clk_rpmh(hw);
+
+	mutex_lock(&rpmh_clk_lock);
+
+	if (c->state)
+		clk_rpmh_aggregate_state_send_command(c, false);
+
+	mutex_unlock(&rpmh_clk_lock);
+};
+
+static unsigned long clk_rpmh_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct clk_rpmh *r = to_clk_rpmh(hw);
+
+	/*
+	 * RPMh clocks have a fixed rate. Return static rate set
+	 * at init time.
+	 */
+	return r->rate;
+}
+
+static const struct clk_ops clk_rpmh_ops = {
+	.prepare	= clk_rpmh_prepare,
+	.unprepare	= clk_rpmh_unprepare,
+	.recalc_rate	= clk_rpmh_recalc_rate,
+};
+
+/* Resource name must match resource id present in cmd-db. */
+DEFINE_CLK_RPMH_ARC(sdm845, bi_tcxo, bi_tcxo_ao, "xo.lvl", 0x3, 0x0, 19200000);
+DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk2, ln_bb_clk2_ao, "lnbclka2", 19200000);
+DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk3, ln_bb_clk3_ao, "lnbclka3", 19200000);
+DEFINE_CLK_RPMH_VRM(sdm845, rf_clk1, rf_clk1_ao, "rfclka1", 38400000);
+DEFINE_CLK_RPMH_VRM(sdm845, rf_clk2, rf_clk2_ao, "rfclka2", 38400000);
+DEFINE_CLK_RPMH_VRM(sdm845, rf_clk3, rf_clk3_ao, "rfclka3", 38400000);
+
+static struct clk_hw *sdm845_rpmh_clocks[] = {
+	[RPMH_CXO_CLK]		= &sdm845_bi_tcxo.hw,
+	[RPMH_CXO_CLK_A]	= &sdm845_bi_tcxo_ao.hw,
+	[RPMH_LN_BB_CLK2]	= &sdm845_ln_bb_clk2.hw,
+	[RPMH_LN_BB_CLK2_A]	= &sdm845_ln_bb_clk2_ao.hw,
+	[RPMH_LN_BB_CLK3]	= &sdm845_ln_bb_clk3.hw,
+	[RPMH_LN_BB_CLK3_A]	= &sdm845_ln_bb_clk3_ao.hw,
+	[RPMH_RF_CLK1]		= &sdm845_rf_clk1.hw,
+	[RPMH_RF_CLK1_A]	= &sdm845_rf_clk1_ao.hw,
+	[RPMH_RF_CLK2]		= &sdm845_rf_clk2.hw,
+	[RPMH_RF_CLK2_A]	= &sdm845_rf_clk2_ao.hw,
+	[RPMH_RF_CLK3]		= &sdm845_rf_clk3.hw,
+	[RPMH_RF_CLK3_A]	= &sdm845_rf_clk3_ao.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sdm845 = {
+	.clks = sdm845_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sdm845_rpmh_clocks),
+};
+
+static int clk_rpmh_probe(struct platform_device *pdev)
+{
+	struct clk *clk;
+	struct clk_hw_onecell_data *hw_data;
+	struct clk_hw **hw_clks;
+	struct clk_rpmh *rpmh_clk;
+	const struct clk_rpmh_desc *desc;
+	struct rpmh_client *rpmh_client;
+	struct device *dev;
+	size_t num_clks, i;
+	int ret;
+
+	dev = &pdev->dev;
+
+	ret = cmd_db_ready();
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Command DB not available (%d)\n",	ret);
+		return ret;
+	}
+
+	rpmh_client = rpmh_get_client(pdev);
+	if (IS_ERR(rpmh_client)) {
+		ret = PTR_ERR(rpmh_client);
+		dev_err(dev, "Failed to request RPMh client, ret=%d\n",	ret);
+		return ret;
+	}
+
+	desc = of_device_get_match_data(&pdev->dev);
+	hw_clks = desc->clks;
+	num_clks = desc->num_clks;
+
+	hw_data = devm_kzalloc(dev,
+			sizeof(*hw_data) + num_clks * sizeof(struct clk_hw *),
+			GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	hw_data->num = num_clks;
+
+	for (i = 0; i < num_clks; i++) {
+		rpmh_clk = to_clk_rpmh(hw_clks[i]);
+		rpmh_clk->res_addr = cmd_db_read_addr(rpmh_clk->res_name);
+		if (!rpmh_clk->res_addr) {
+			dev_err(dev, "missing RPMh resource address for %s\n",
+					rpmh_clk->res_name);
+			ret = -ENODEV;
+			goto err;
+		}
+
+		rpmh_clk->rpmh_client = rpmh_client;
+
+		clk = devm_clk_register(&pdev->dev, hw_clks[i]);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			dev_err(dev, "failed to register %s\n",
+					hw_clks[i]->init->name);
+			goto err;
+		}
+
+		rpmh_clk->dev = &pdev->dev;
+	}
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+				      hw_data);
+	if (ret) {
+		dev_err(dev, "Failed to add clock provider\n");
+		goto err;
+	}
+
+	dev_dbg(dev, "Registered RPMh clocks\n");
+
+	return 0;
+err:
+	if (rpmh_client)
+		rpmh_release(rpmh_client);
+
+	return ret;
+}
+
+static int clk_rpmh_remove(struct platform_device *pdev)
+{
+	const struct clk_rpmh_desc *desc =
+			of_device_get_match_data(&pdev->dev);
+	struct clk_hw **hw_clks = desc->clks;
+	struct clk_rpmh *rpmh_clk = to_clk_rpmh(hw_clks[0]);
+
+	rpmh_release(rpmh_clk->rpmh_client);
+
+	return 0;
+}
+
+static const struct of_device_id clk_rpmh_match_table[] = {
+	{ .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clk_rpmh_match_table);
+
+static struct platform_driver clk_rpmh_driver = {
+	.probe		= clk_rpmh_probe,
+	.remove		= clk_rpmh_remove,
+	.driver		= {
+		.name	= "clk-rpmh",
+		.of_match_table = clk_rpmh_match_table,
+	},
+};
+
+static int __init clk_rpmh_init(void)
+{
+	return platform_driver_register(&clk_rpmh_driver);
+}
+subsys_initcall(clk_rpmh_init);
+
+static void __exit clk_rpmh_exit(void)
+{
+	platform_driver_unregister(&clk_rpmh_driver);
+}
+module_exit(clk_rpmh_exit);
+
+MODULE_DESCRIPTION("QCOM RPMh Clock Driver");
+MODULE_LICENSE("GPL v2");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [v4 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver
  2018-04-24 12:23 ` [v4 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
@ 2018-04-26 23:40   ` Stephen Boyd
  2018-05-01  8:40     ` Taniya Das
  0 siblings, 1 reply; 6+ messages in thread
From: Stephen Boyd @ 2018-04-26 23:40 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Taniya Das
  Cc: Andy Gross, David Brown, Rajendra Nayak, Odelu Kukatla,
	Amit Nischal, linux-arm-msm, linux-soc, linux-clk, linux-kernel,
	devicetree, Taniya Das

Quoting Taniya Das (2018-04-24 05:23:19)
> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> new file mode 100644
> index 0000000..907a73f
> --- /dev/null
> +++ b/drivers/clk/qcom/clk-rpmh.c
> @@ -0,0 +1,364 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <soc/qcom/cmd-db.h>
> +#include <soc/qcom/rpmh.h>
> +
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +
> +#define CLK_RPMH_ARC_EN_OFFSET         0
> +#define CLK_RPMH_VRM_EN_OFFSET         4
> +
> +/**
> + * struct clk_rpmh - individual rpmh clock data structure
> + * @hw:                        handle between common and hardware-specific interfaces
> + * @res_name:          resource name for the rpmh clock
> + * @res_addr:          base address of the rpmh resource within the RPMh
> + * @res_en_offset:     clock resource enable offset corresponding to ARC or
> + *                     VRM type clock

Can these be combined still? Just do a += on res_addr after we get the
base of it?

> + * @res_on_val:                rpmh clock enable value
> + * @res_off_val:       rpmh clock disable value
> + * @state:             rpmh clock requested state
> + * @aggr_state:                rpmh clock aggregated state
> + * @last_sent_aggr_state: rpmh clock last aggr state sent to RPMh
> + * @valid_state_mask:  mask to determine the state of the rpmh clock
> + * @rpmh_client:       handle used for rpmh communications
> + * @dev:               device to which it is attached
> + * @peer:              pointer to the clock rpmh sibling
> + * @rate:              rate of the rpmh clock
> + */
> +struct clk_rpmh {
> +       struct clk_hw hw;
> +       const char *res_name;
> +       u32 res_addr;
> +       u32 res_en_offset;
> +       u32 res_on_val;
> +       u32 res_off_val;
> +       u32 state;
> +       u32 aggr_state;
> +       u32 last_sent_aggr_state;
> +       u32 valid_state_mask;
> +       struct rpmh_client *rpmh_client;
> +       struct device *dev;
> +       struct clk_rpmh *peer;
> +       unsigned long rate;
> +};
[...]
> +
> +static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
> +{
> +       return (c->last_sent_aggr_state & BIT(state))
> +               != (c->aggr_state & BIT(state));

Please drop useless parenthesis.

> +}
> +
> +static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
> +{
> +       struct tcs_cmd cmd = { 0 };
> +       u32 cmd_state, on_val;
> +       enum rpmh_state state = RPMH_SLEEP_STATE;
> +       int ret;
> +
> +       cmd.addr = c->res_addr + c->res_en_offset;
> +       cmd_state = c->aggr_state;
> +       on_val = c->res_on_val;
> +
> +       for (; state <= RPMH_ACTIVE_ONLY_STATE; state++) {
> +               if (has_state_changed(c, state)) {
> +                       cmd.data = (cmd_state & BIT(state)) ? on_val : 0;
> +                       ret = rpmh_write_async(c->rpmh_client, state,
> +                                               &cmd, 1);
> +                       if (ret) {
> +                               dev_err(c->dev, "set %s state of %s failed: (%d)\n",
> +                                       (!state) ? "sleep" :

Drop parenthesis please.

> +                                       (state == RPMH_WAKE_ONLY_STATE) ?

Drop parenthesis please.

> +                                       "wake" : "active", c->res_name, ret);
> +                               return ret;
> +                       }
> +               }
> +       }
> +
> +       c->last_sent_aggr_state = c->aggr_state;
> +       c->peer->last_sent_aggr_state =  c->last_sent_aggr_state;
> +
> +       return 0;
> +}
[...]
> +
> +static const struct clk_ops clk_rpmh_ops = {
> +       .prepare        = clk_rpmh_prepare,
> +       .unprepare      = clk_rpmh_unprepare,
> +       .recalc_rate    = clk_rpmh_recalc_rate,
> +};
> +
> +/* Resource name must match resource id present in cmd-db. */
> +DEFINE_CLK_RPMH_ARC(sdm845, bi_tcxo, bi_tcxo_ao, "xo.lvl", 0x3, 0x0, 19200000);
> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk2, ln_bb_clk2_ao, "lnbclka2", 19200000);
> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk3, ln_bb_clk3_ao, "lnbclka3", 19200000);
> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk1, rf_clk1_ao, "rfclka1", 38400000);
> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk2, rf_clk2_ao, "rfclka2", 38400000);
> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk3, rf_clk3_ao, "rfclka3", 38400000);

These rates should come from DT and parents of these clks.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [v4 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings
  2018-04-24 12:23 ` [v4 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings Taniya Das
@ 2018-04-26 23:40   ` Stephen Boyd
  0 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2018-04-26 23:40 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Taniya Das
  Cc: Andy Gross, David Brown, Rajendra Nayak, Odelu Kukatla,
	Amit Nischal, linux-arm-msm, linux-soc, linux-clk, linux-kernel,
	devicetree, Taniya Das

Quoting Taniya Das (2018-04-24 05:23:18)
> Add RPMh clock device bindings for Qualcomm Technology Inc's SoCs. These
> devices would be used for communicating resource state requests to control
> the clocks managed by RPMh.
> 
> Signed-off-by: Amit Nischal <anischal@codeaurora.org>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-next

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [v4 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver
  2018-04-26 23:40   ` Stephen Boyd
@ 2018-05-01  8:40     ` Taniya Das
  0 siblings, 0 replies; 6+ messages in thread
From: Taniya Das @ 2018-05-01  8:40 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette, Stephen Boyd
  Cc: Andy Gross, David Brown, Rajendra Nayak, Odelu Kukatla,
	Amit Nischal, linux-arm-msm, linux-soc, linux-clk, linux-kernel,
	devicetree

Hello Stephen,

Thanks for the review comments.

On 4/27/2018 5:10 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2018-04-24 05:23:19)
>> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
>> new file mode 100644
>> index 0000000..907a73f
>> --- /dev/null
>> +++ b/drivers/clk/qcom/clk-rpmh.c
>> @@ -0,0 +1,364 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <soc/qcom/cmd-db.h>
>> +#include <soc/qcom/rpmh.h>
>> +
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +
>> +#define CLK_RPMH_ARC_EN_OFFSET         0
>> +#define CLK_RPMH_VRM_EN_OFFSET         4
>> +
>> +/**
>> + * struct clk_rpmh - individual rpmh clock data structure
>> + * @hw:                        handle between common and hardware-specific interfaces
>> + * @res_name:          resource name for the rpmh clock
>> + * @res_addr:          base address of the rpmh resource within the RPMh
>> + * @res_en_offset:     clock resource enable offset corresponding to ARC or
>> + *                     VRM type clock
> 
> Can these be combined still? Just do a += on res_addr after we get the
> base of it?
> 
I have taken care in the next patch.

>> + * @res_on_val:                rpmh clock enable value
>> + * @res_off_val:       rpmh clock disable value
>> + * @state:             rpmh clock requested state
>> + * @aggr_state:                rpmh clock aggregated state
>> + * @last_sent_aggr_state: rpmh clock last aggr state sent to RPMh
>> + * @valid_state_mask:  mask to determine the state of the rpmh clock
>> + * @rpmh_client:       handle used for rpmh communications
>> + * @dev:               device to which it is attached
>> + * @peer:              pointer to the clock rpmh sibling
>> + * @rate:              rate of the rpmh clock
>> + */
>> +struct clk_rpmh {
>> +       struct clk_hw hw;
>> +       const char *res_name;
>> +       u32 res_addr;
>> +       u32 res_en_offset;
>> +       u32 res_on_val;
>> +       u32 res_off_val;
>> +       u32 state;
>> +       u32 aggr_state;
>> +       u32 last_sent_aggr_state;
>> +       u32 valid_state_mask;
>> +       struct rpmh_client *rpmh_client;
>> +       struct device *dev;
>> +       struct clk_rpmh *peer;
>> +       unsigned long rate;
>> +};
> [...]
>> +
>> +static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
>> +{
>> +       return (c->last_sent_aggr_state & BIT(state))
>> +               != (c->aggr_state & BIT(state));
> 
> Please drop useless parenthesis.
> 

I see a warning in case I remove the parenthesis.

warning: suggest parentheses around comparison in operand of ‘&’ 
[-Wparentheses]
    != c->aggr_state & BIT(state));

>> +}
>> +
>> +static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
>> +{
>> +       struct tcs_cmd cmd = { 0 };
>> +       u32 cmd_state, on_val;
>> +       enum rpmh_state state = RPMH_SLEEP_STATE;
>> +       int ret;
>> +
>> +       cmd.addr = c->res_addr + c->res_en_offset;
>> +       cmd_state = c->aggr_state;
>> +       on_val = c->res_on_val;
>> +
>> +       for (; state <= RPMH_ACTIVE_ONLY_STATE; state++) {
>> +               if (has_state_changed(c, state)) {
>> +                       cmd.data = (cmd_state & BIT(state)) ? on_val : 0;
>> +                       ret = rpmh_write_async(c->rpmh_client, state,
>> +                                               &cmd, 1);
>> +                       if (ret) {
>> +                               dev_err(c->dev, "set %s state of %s failed: (%d)\n",
>> +                                       (!state) ? "sleep" :
> 
> Drop parenthesis please.
> 

Dropped.

>> +                                       (state == RPMH_WAKE_ONLY_STATE) ?
> 
> Drop parenthesis please.
> 

Dropped.

>> +                                       "wake" : "active", c->res_name, ret);
>> +                               return ret;
>> +                       }
>> +               }
>> +       }
>> +
>> +       c->last_sent_aggr_state = c->aggr_state;
>> +       c->peer->last_sent_aggr_state =  c->last_sent_aggr_state;
>> +
>> +       return 0;
>> +}
> [...]
>> +
>> +static const struct clk_ops clk_rpmh_ops = {
>> +       .prepare        = clk_rpmh_prepare,
>> +       .unprepare      = clk_rpmh_unprepare,
>> +       .recalc_rate    = clk_rpmh_recalc_rate,
>> +};
>> +
>> +/* Resource name must match resource id present in cmd-db. */
>> +DEFINE_CLK_RPMH_ARC(sdm845, bi_tcxo, bi_tcxo_ao, "xo.lvl", 0x3, 0x0, 19200000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk2, ln_bb_clk2_ao, "lnbclka2", 19200000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk3, ln_bb_clk3_ao, "lnbclka3", 19200000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk1, rf_clk1_ao, "rfclka1", 38400000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk2, rf_clk2_ao, "rfclka2", 38400000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk3, rf_clk3_ao, "rfclka3", 38400000);
> 
> These rates should come from DT and parents of these clks.
> 

Removed the rates from the above and instead I would take the clk-div 
values from the DT for the clocks and compute the rates and parents are 
fixed to "xo_board".

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2018-05-01  8:41 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-24 12:23 [v4 0/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
2018-04-24 12:23 ` [v4 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings Taniya Das
2018-04-26 23:40   ` Stephen Boyd
2018-04-24 12:23 ` [v4 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
2018-04-26 23:40   ` Stephen Boyd
2018-05-01  8:40     ` Taniya Das

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).